- 12 Sep, 2020 12 commits
-
-
Martin DEVERA authored
I encountered bug in SX1502 expander driver in 5.7.7. Here is relevant DTS part: compatible = "semtech,sx1502q"; gpio4_cfg_pins: gpio2-cfg { pins = "gpio5"; output-high; }; And part of OOPS: [ 0.673996] [<c023cfa6>] (gpiochip_get_data) from [<c023b235>] (sx150x_gpio_direction_output+0xd) [ 0.683259] [<c023b235>] (sx150x_gpio_direction_output) from [<c023b363>] (sx150x_pinconf_set+0x) [ 0.692796] [<c023b363>] (sx150x_pinconf_set) from [<c0238fef>] (pinconf_apply_setting+0x39/0x7e) [ 0.701635] [<c0238fef>] (pinconf_apply_setting) from [<c0236c77>] (pinctrl_commit_state+0xa5/0x) [ 0.710648] [<c0236c77>] (pinctrl_commit_state) from [<c0237e03>] (pinctrl_enable+0xff/0x1d4) [ 0.719139] [<c0237e03>] (pinctrl_enable) from [<c023b791>] (sx150x_probe+0x1a3/0x358) [ 0.727027] [<c023b791>] (sx150x_probe) from [<c02c38bf>] (i2c_device_probe+0x1bb/0x1dc) The problem is that sx150x_pinconf_set uses sx150x_gpio_direction_output but gpio is not setup yet. Patch below fixes it but I'm not sure whether is it correct. Link: https://lore.kernel.org/r/f32130bf-cfd4-b1bf-538c-dbc9ee2d947a@eaxlabs.czSigned-off-by:Martin DEVERA <devik@eaxlabs.cz> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Heiko Stuebner authored
The Rockchip pinctrl driver needs to handle information from Devicetree so only makes sense getting compiled on systems with CONFIG_OF enabled. This also fixes a problem found by the "kernel-test-robot" when compiling the driver on test-builds that do not have CONFIG_OF enabled: drivers/pinctrl/pinctrl-rockchip.c: In function 'rockchip_pinctrl_parse_groups': >> drivers/pinctrl/pinctrl-rockchip.c:2881:9: error: implicit declaration of function 'pinconf_generic_parse_dt_config'; did you mean 'pinconf_generic_dump_config'? [-Werror=implicit-function-declaration] 2881 | ret = pinconf_generic_parse_dt_config(np_config, NULL, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | pinconf_generic_dump_config drivers/pinctrl/pinctrl-rockchip.c: In function 'rockchip_gpiolib_register': >> drivers/pinctrl/pinctrl-rockchip.c:3473:5: error: 'struct gpio_chip' has no member named 'of_node' 3473 | gc->of_node = bank->of_node; Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20200905214955.907950-1-heiko@sntech.deSigned-off-by:
-
Yangtao Li authored
This commit introduces support for the pin controller on A100. Signed-off-by:
Yangtao Li <frank@allwinnertech.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/4e331a2ed4a30c883df6157bc5c52bb686aa8e0d.1595572867.git.frank@allwinnertech.comSigned-off-by:
-
Yangtao Li authored
Add device tree binding Documentation details for A100 pinctrl driver, which has a r pin controller and a pin controller with more irq lines. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Yangtao Li authored
Rather than a continual nesting of 'else' clauses, just make each 'if' a new entry under 'allOf' and get rid of the else. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Add pinctrl support to Toshiba Visconti SoCs. Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by:
Punit Agrawal <punit1.agrawal@toshiba.co.jp> Link: https://lore.kernel.org/r/20200909204336.2558-3-nobuhiro1.iwamatsu@toshiba.co.jpSigned-off-by:
-
Nobuhiro Iwamatsu authored
Add pinctrl bindings for Toshiba Visconti TMPV7700 SoC series. Signed-off-by:
-
Rikard Falkeborn authored
The only usage of s900_padinfo[] is to assign it to the padinfo field in the owl_pinctrl_soc_data struct, which is a const pointer. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200830224311.36994-4-rikard.falkeborn@gmail.comSigned-off-by:
-
Rikard Falkeborn authored
The only usage of s700_padinfo[] is to assign it to the padinfo field in the owl_pinctrl_soc_data struct, which is a const pointer. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
-
Rikard Falkeborn authored
The only usage of owl_pinctrl_ops and owl_pinmux_ops is to assign their addresses to the pctlops and the pmxops fields in the pinctrl_desc struct, which are const pointers. Make them const to allow the compiler to put them in read-only memory. Signed-off-by:
-
Thomas Preston authored
On page 23 of the datasheet [0] it says "The register remains unchanged until the interrupt is cleared via a read of INTCAP or GPIO." Include INTCAPA and INTCAPB registers in precious range, so that they aren't accidentally cleared when we read via debugfs. [0] https://ww1.microchip.com/downloads/en/DeviceDoc/20001952C.pdf Fixes: 8f38910b ("pinctrl: mcp23s08: switch to regmap caching") Signed-off-by:
Thomas Preston <thomas.preston@codethink.co.uk> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200828213226.1734264-3-thomas.preston@codethink.co.ukSigned-off-by:
-
Thomas Preston authored
The mcp23x17_regmap is initialised with structs named "mcp23x16". However, the mcp23s08 driver doesn't support the MCP23016 device yet, so this appears to be a typo. Fixes: 8f38910b ("pinctrl: mcp23s08: switch to regmap caching") Signed-off-by:
-
- 28 Aug, 2020 1 commit
-
-
Andy Shevchenko authored
Print particular message in each of error case in the ->probe(). While here, use dev_err_probe() for that. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200828103235.78380-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
- 27 Aug, 2020 10 commits
-
-
Zhiyong Tao authored
This commit includes pinctrl driver for mt8192. Signed-off-by:
Zhiyong Tao <zhiyong.tao@mediatek.com> Acked-by:
Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/20200817001702.1646-4-zhiyong.tao@mediatek.comSigned-off-by:
-
Zhiyong Tao authored
The commit adds mt8192 compatible node in binding document. Signed-off-by:
-
Zhiyong Tao authored
This patch adds pinctrl file for mt8192. Signed-off-by:
-
Cristian Ciocaltea authored
Update the pinctrl binding entry to match all members of Actions Semi Owl SoCs. Signed-off-by:
Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/1a9eb2b12c151d4d765d2aa74dc9cd58b3c117dc.1596461275.git.cristian.ciocaltea@gmail.comSigned-off-by:
-
Cristian Ciocaltea authored
Add pinctrl and gpio driver for Actions Semi S500 SoC. The driver supports pinctrl, pinmux, pinconf, gpio and interrupt functions using a set of registers shared between gpio and pinctrl. Signed-off-by:
-
Cristian Ciocaltea authored
Add pinctrl and gpio bindings for Actions Semi S500 SoC. Signed-off-by:
-
Bartosz Dudziak authored
Add initial Qualcomm msm8226 pinctrl driver to support pin configuration with pinctrl framework for msm8226 SoC. - Initial formatting and style was taken from the msm8x74 pinctrl driver added by Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Bartosz Dudziak <bartosz.dudziak@snejp.pl> Link: https://lore.kernel.org/r/20200716205530.22910-3-bartosz.dudziak@snejp.plSigned-off-by:
-
Bartosz Dudziak authored
Add device tree binding Documentation details for Qualcomm msm8226 pinctrl driver. - Bindings documentation was based on qcom,ipq6018-pinctrl.yaml added by Sricharan R <sricharan@codeaurora.org> and then modified for msm8226 content Signed-off-by:
-
Pali Rohár authored
Group name 'pcie1' is misleading as it controls only PCIe reset pin. Like other PCIe groups it should have been called 'pcie1_reset'. But due to backward compatibility it is not possible to change existing group name. So just add comment describing this PCIe reset functionality. Signed-off-by:
Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200724132457.7094-1-pali@kernel.orgSigned-off-by:
-
Andrew Halaney authored
The nomadik pinctrl hardware doesn't have any way to determine if the active pull is up or down. Reading the bit currently used to report if the pull is up/down indicates if the gpio input is reading high or low, it doesn't reflect the pull state. For this reason change the output from "pull up"/"pull down" to "pull enabled". This avoids confusing developers who were using the output to determine what the pull state is. Signed-off-by:
Andrew Halaney <ajhalaney@gmail.com> Link: https://lore.kernel.org/r/20200806155322.GA25523@ola-jn9phv2.ad.garmin.comSigned-off-by:
-
- 16 Aug, 2020 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
-
Mike Rapoport authored
Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Tested-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
-
- 15 Aug, 2020 11 commits
-
-
Jens Axboe authored
One case was missed in the short IO retry handling, and that's hitting -EAGAIN on a blocking attempt read (eg from io-wq context). This is a problem on sockets that are marked as non-blocking when created, they don't carry any REQ_F_NOWAIT information to help us terminate them instead of perpetually retrying. Fixes: 227c0c96 ("io_uring: internally retry short reads") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
There's a bit of confusion on the matching pairs of poll vs double poll, depending on if the request is a pure poll (IORING_OP_POLL_ADD) or poll driven retry. Add io_poll_get_double() that returns the double poll waitqueue, if any, and io_poll_get_single() that returns the original poll waitqueue. With that, remove the argument to io_poll_remove_double(). Finally ensure that wait->private is cleared once the double poll handler has run, so that remove knows it's already been seen. Cc: stable@vger.kernel.org # v5.8 Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull more perf tools updates from Arnaldo Carvalho de Melo: "Fixes: - Fixes for 'perf bench numa'. - Always memset source before memcpy in 'perf bench mem'. - Quote CC and CXX for their arguments to fix build in environments using those variables to pass more than just the compiler names. - Fix module symbol processing, addressing regression detected via "perf test". - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry. Improvements: - Add script to autogenerate socket family name id->string table from copy of kernel header, used so far in 'perf trace'. - 'perf ftrace' improvements to provide similar options for this utility so that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just by changing the name of the subcommand. - Prefer new "sched:sched_waking" trace event when it exists in 'perf sched' post processing. - Update POWER9 metrics to utilize other metrics. - Fall back to querying debuginfod if debuginfo not found locally. Miscellaneous: - Sync various kvm headers with kernel sources" * tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits) perf ftrace: Make option description initials all capital letters perf build-ids: Fall back to debuginfod query if debuginfo not found perf bench numa: Remove dead code in parse_nodes_opt() perf stat: Update POWER9 metrics to utilize other metrics perf ftrace: Add change log perf: ftrace: Add set_tracing_options() to set all trace options perf ftrace: Add option --tid to filter by thread id perf ftrace: Add option -D/--delay to delay tracing perf: ftrace: Allow set graph depth by '--graph-opts' perf ftrace: Add support for trace option tracing_thresh perf ftrace: Add option 'verbose' to show more info for graph tracer perf ftrace: Add support for tracing option 'irq-info' perf ftrace: Add support for trace option funcgraph-irqs perf ftrace: Add support for trace option sleep-time perf ftrace: Add support for tracing option 'func_stack_trace' perf tools: Add general function to parse sublevel options perf ftrace: Add option '--inherit' to trace children processes perf ftrace: Show trace column header perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size perf ftrace: Factor out function write_tracing_file_int() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes and small updates all around the place: - Fix mitigation state sysfs output - Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support - Fix Lightning Mountain SoC TSC frequency enumeration bug - Fix kexec debug output - Fix kexec memory range assumption bug - Fix a boundary condition in the crash kernel code - Optimize porgatory.ro generation a bit - Enable ACRN guests to use X2APIC mode - Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT" * tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Acquire pte lock with interrupts enabled x86/bugs/multihit: Fix mitigation reporting when VMX is not in use x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs x86/purgatory: Don't generate debug info for purgatory.ro x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC kexec_file: Correctly output debugging information for the PT_LOAD ELF header kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges x86/crash: Correct the address boundary of function parameters x86/acrn: Remove redundant chars from ACRN signature x86/acrn: Allow ACRN guest to use X2APIC mode -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: fix a new tracepoint's output value, and fix the formatting of show-state syslog printouts" * tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix the alignment of the show-state debug output sched: Fix use of count for nr_running tracepoint
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc fixes, an expansion of perf syscall access to CAP_PERFMON privileged tools, plus a RAPL HW-enablement for Intel SPR platforms" * tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Add support for Intel SPR platform perf/x86/rapl: Support multiple RAPL unit quirks perf/x86/rapl: Fix missing psys sysfs attributes hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration kprobes: Remove show_registers() function prototype perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixlets from Ingo Molnar: "A documentation fix and a 'fallthrough' macro update" * tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Convert to use the preferred 'fallthrough' macro Documentation/locking/locktypes: Fix a typo
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: - some code cleanup - a couple of static analysis fixes - setattr: try to pick a fid associated with the file rather than the dentry, which might sometimes matter * tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux: 9p: Remove unneeded cast from memory allocation 9p: remove unused code in 9p net/9p: Fix sparse endian warning in trans_fd.c 9p: Fix memory leak in v9fs_mount 9p: retrieve fid from file when file instance exist.
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small cifs/smb3 fixes, one for stable fixing mkdir path with the 'idsfromsid' mount option" * tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Fix mkdir when idsfromsid configured on mount cifs: Convert to use the fallthrough macro cifs: Fix an error pointer dereference in cifs_mount()
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Stable fixes: - pNFS: Don't return layout segments that are being used for I/O - pNFS: Don't move layout segments off the active list when being used for I/O Features: - NFS: Add support for user xattrs through the NFSv4.2 protocol - NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC - NFSv4.0 allow nconnect for v4.0 Bugfixes and cleanups: - nfs: ensure correct writeback errors are returned on close() - nfs: nfs_file_write() should check for writeback errors - nfs: Fix getxattr kernel panic and memory overflow - NFS: Fix the pNFS/flexfiles mirrored read failover code - SUNRPC: dont update timeout value on connection reset - freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS - sunrpc: destroy rpc_inode_cachep after unregister_filesystem" * tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (32 commits) NFS: Fix flexfiles read failover fs: nfs: delete repeated words in comments rpc_pipefs: convert comma to semicolon nfs: Fix getxattr kernel panic and memory overflow NFS: Don't return layout segments that are in use NFS: Don't move layouts to plh_return_segs list while in use NFS: Add layout segment info to pnfs read/write/commit tracepoints NFS: Add tracepoints for layouterror and layoutstats. NFS: Report the stateid + status in trace_nfs4_layoutreturn_on_close() SUNRPC dont update timeout value on connection reset nfs: nfs_file_write() should check for writeback errors nfs: ensure correct writeback errors are returned on close() NFSv4.2: xattr cache: get rid of cache discard work queue NFS: remove redundant initialization of variable result NFSv4.0 allow nconnect for v4.0 freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS sunrpc: destroy rpc_inode_cachep after unregister_filesystem NFSv4.2: add client side xattr caching. NFSv4.2: hook in the user extended attribute handlers NFSv4.2: add the extended attribute proc functions. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull edac fix from Tony Luck: "Fix for the ie31200 driver that missed the first pull" * tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ie31200: Fallback if host bridge device is already initialized
-
