- 05 Jun, 2017 5 commits
-
-
Kim Phillips authored
On an Ubuntu xenial system, 'perf annotate' says to install powerpc objdump on a system that already has binutils-powerpc-linux-gnu installed. Make perf aware of the missing triplet for the powerpc-linux-gnu target. Signed-off-by:
Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20170529142754.7fbfb1152fd8f2663de0ea70@arm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
The following tests are failing on powerpc: # perf test break 18: Breakpoint overflow signal handler : FAILED! 19: Breakpoint overflow sampling : FAILED! The powerpc kenel so far does not have support to even create instruction breakpoints using the perf event interface, so those tests fail early in the config phase. I added a '->is_supported()' callback to test struct to be able to disable specific tests. It seems better than putting ifdefs directly to the test array. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20170601205450.GA398@kravaSigned-off-by:
-
Namhyung Kim authored
The decompress_kmodule() decompresses kernel modules in order to load symbols from it. In the DSO_BINARY_TYPE__BUILD_ID_CACHE case, it needs the full file path to extract the file extension to determine the decompression method. But overwriting 'name' will fail the decompression since it might point to a non-existing old file. Instead, use dso->long_name for having the correct extension and use the real filename to decompress. In the DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP case, both names should be the same. This allows resolving symbols in the old modules. Before: $ perf report -i perf.data.old | grep scsi_mod 0.00% cc1 [scsi_mod] [k] 0x0000000000004aa6 0.00% as [scsi_mod] [k] 0x00000000000099e1 0.00% cc1 [scsi_mod] [k] 0x0000000000009830 0.00% cc1 [scsi_mod] [k] 0x0000000000001b8f After: 0.00% cc1 [scsi_mod] [k] scsi_handle_queue_ramp_up 0.00% as [scsi_mod] [k] scsi_sg_alloc 0.00% cc1 [scsi_mod] [k] scsi_setup_cmnd 0.00% cc1 [scsi_mod] [k] scsi_get_command Signed-off-by:Namhyung Kim <namhyung@kernel.org> Acked-by:
-
Namhyung Kim authored
Like machine__findnew_module_dso(), it should set necessary info for kernel modules to find symbol info from the file. Factor out dso__set_module_info() to do it. This is needed for dso__needs_decompress() to detect such DSOs. Signed-off-by:
-
Namhyung Kim authored
When perf processes build-id event, it creates DSOs with the build-id. But it didn't set the module short name (like '[module-name]') so when processing a kernel mmap event of the module, it cannot found the DSO as it only checks the short names. That leads for perf to create a same DSO without the build-id info and it'll lookup the system path even if the DSO is already in the build-id cache. After kernel was updated, perf cannot find the DSO and cannot show symbols in it anymore. You can see this if you have an old data file (w/ old kernel version): $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz : cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 Failed to open /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz, continuing without symbols ... The second message didn't show the build-id. With this patch: $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz: cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz with build id cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 not found, continuing without symbols ... Now it shows the build-id but still cannot load the symbol table. This is a different problem which will be fixed in the next patch. Signed-off-by:
-
- 02 Jun, 2017 1 commit
-
-
Andi Kleen authored
Only print the NMI watchdog hint when that watchdog it actually enabled. This avoids printing these unnecessarily. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
-
- 01 Jun, 2017 2 commits
-
-
Kim Phillips authored
'perf annotate' is dropping the cr* fields from branch instructions. Fix it by adding support to display branch instructions having multiple operands. Power Arch objdump of int_sqrt: 20.36 | c0000000004d2694: subf r10,r10,r3 | c0000000004d2698: v bgt cr6,c0000000004d26a0 <int_sqrt+0x40> 1.82 | c0000000004d269c: mr r3,r10 29.18 | c0000000004d26a0: mr r10,r8 | c0000000004d26a4: v bgt cr7,c0000000004d26ac <int_sqrt+0x4c> | c0000000004d26a8: mr r10,r7 Power Arch Before Patch: 20.36 | subf r10,r10,r3 | v bgt 40 1.82 | mr r3,r10 29.18 | 40: mr r10,r8 | v bgt 4c | mr r10,r7 Power Arch After patch: 20.36 | subf r10,r10,r3 | v bgt cr6,40 1.82 | mr r3,r10 29.18 | 40: mr r10,r8 | v bgt cr7,4c | mr r10,r7 Also support AArch64 conditional branch instructions, which can have up to three operands: Aarch64 Non-simplified (raw objdump) view: │ffff0000083cd11c: ↑ cbz w0, ffff0000083cd100 <security_fil▒ ... 4.44 │ffff000│083cd134: ↓ tbnz w0, #26, ffff0000083cd190 <securit▒ ... 1.37 │ffff000│083cd144: ↓ tbnz w22, #5, ffff0000083cd1a4 <securit▒ │ffff000│083cd148: mov w19, #0x20000 //▒ 1.02 │ffff000│083cd14c: ↓ tbz w22, #2, ffff0000083cd1ac <securit▒ ... 0.68 │ffff000└──3cd16c: ↑ cbnz w0, ffff0000083cd120 <security_fil▒ Aarch64 Simplified, before this patch: │ ↑ cbz 40 ... 4.44 │ │↓ tbnz w0, #26, ffff0000083cd190 <security_file_permiss▒ ... 1.37 │ │↓ tbnz w22, #5, ffff0000083cd1a4 <security_file_permiss▒ │ │ mov w19, #0x20000 // #131072 1.02 │ │↓ tbz w22, #2, ffff0000083cd1ac <security_file_permiss▒ ... 0.68 │ └──cbnz 60 the cbz operand is missing, and the tbz doesn't get simplified processing at all because the parsing function failed to match an address. Aarch64 Simplified, After this patch applied: │ ↑ cbz w0, 40 ... 4.44 │ │↓ tbnz w0, #26, d0 ... 1.37 │ │↓ tbnz w22, #5, e4 │ │ mov w19, #0x20000 // #131072 1.02 │ │↓ tbz w22, #2, ec ... 0.68 │ └──cbnz w0, 60 Originally-by:Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Tested-by:
Anton Blanchard <anton@samba.org> Reported-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Jiri Olsa authored
The s390 architecture maps sys_mmap (nr 90) into sys_old_mmap. For this reason perf trace can't find the proper syscall event to get args format from and displays it wrongly as 'continued'. To fix that fill the "alias" field with "old_mmap" for trace's mmap record to get the correct translation. Before: 0.042 ( 0.011 ms): vest/43052 fstat(statbuf: 0x3ffff89fd90 ) = 0 0.042 ( 0.028 ms): vest/43052 ... [continued]: mmap()) = 0x3fffd6e2000 0.072 ( 0.025 ms): vest/43052 read(buf: 0x3fffd6e2000, count: 4096 ) = 6 After: 0.045 ( 0.011 ms): fstat(statbuf: 0x3ffff8a0930 ) = 0 0.057 ( 0.018 ms): mmap(arg: 0x3ffff8a0858 ) = 0x3fffd14a000 0.076 ( 0.025 ms): read(buf: 0x3fffd14a000, count: 4096 ) = 6 Signed-off-by:
-
- 27 May, 2017 1 commit
-
-
Ravi Bangoria authored
When filename contains special chars, perf annotate fails with an error: $ perf annotate --vmlinux ./vmlinux\(test\) --stdio native_safe_halt sh: -c: line 0: syntax error near unexpected token `(' sh: -c: line 0: `objdump --start-address=0xffffffff8184e840 --stop-address=0xffffffff8184e848 -l -d --no-show-raw -S -C ./vmlinux(test) 2>/dev/null|grep -v ./vmlinux(test):|expand' Fix it by surrounding filename in double quotes. Signed-off-by:
-
- 24 May, 2017 8 commits
-
-
Ingo Molnar authored
Sync (copy) the following v4.12 kernel headers to the tooling headers: arch/x86/include/asm/disabled-features.h: arch/x86/include/uapi/asm/kvm.h: arch/powerpc/include/uapi/asm/kvm.h: arch/s390/include/uapi/asm/kvm.h: arch/arm/include/uapi/asm/kvm.h: arch/arm64/include/uapi/asm/kvm.h: - 'struct kvm_sync_regs' got changed in an ABI-incompatible way, fortunately none of the (in-kernel) tooling relied on it - new KVM_DEV calls added arch/x86/include/asm/required-features.h: - 5-level paging hardware ABI detail added arch/x86/include/asm/cpufeatures.h: - new CPU feature added arch/x86/include/uapi/asm/vmx.h: - new VMX exit conditions None of the changes requires fixes in the tooling source code. This addresses the following warnings: Warning: include/uapi/linux/stat.h differs from kernel Warning: arch/x86/include/asm/disabled-features.h differs from kernel Warning: arch/x86/include/asm/required-features.h differs from kernel Warning: arch/x86/include/asm/cpufeatures.h differs from kernel Warning: arch/x86/include/uapi/asm/kvm.h differs from kernel Warning: arch/x86/include/uapi/asm/vmx.h differs from kernel Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel Warning: arch/s390/include/uapi/asm/kvm.h differs from kernel Warning: arch/arm/include/uapi/asm/kvm.h differs from kernel Warning: arch/arm64/include/uapi/asm/kvm.h differs from kernel Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yao Jin <yao.jin@linux.intel.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170524065721.j2mlch6bgk5klgbc@gmail.comSigned-off-by:Ingo Molnar <mingo@kernel.org>
-
Namhyung Kim authored
The __hpp__sort_acc() sorts entries using callchain depth in order to put callers above in children mode. But it assumed the callchain order was callee-first. Now default (for children) is caller-first so the order of entries is reverted. For example, consider following case: $ perf report --no-children ..l # Overhead Command Shared Object Symbol # ........ ....... ................... .......................... # 99.44% a.out a.out [.] main | ---main __libc_start_main _start Then children mode should show 'start' above '__libc_start_main' since it's the caller (parent) of the __libc_start_main. But it's reversed: # Children Self Command Shared Object Symbol # ........ ........ ....... ............... ..................... # 99.61% 0.00% a.out libc-2.25.so [.] __libc_start_main 99.61% 0.00% a.out a.out [.] _start 99.54% 99.44% a.out a.out [.] main This patch fixes it. # Children Self Command Shared Object Symbol # ........ ........ ....... ............... ..................... # 99.61% 0.00% a.out a.out [.] _start 99.61% 0.00% a.out libc-2.25.so [.] __libc_start_main 99.54% 99.44% a.out a.out [.] main Signed-off-by: -
Milian Wolff authored
The very last inlined frame, i.e. the one furthest away from the non-inlined frame, was silently dropped. This is apparent when comparing the output of `perf script` and `addr2line`: ~~~~~~ $ perf script --inline ... a.out 26722 80836.309329: 72425 cycles: 21561 __hypot_finite (/usr/lib/libm-2.25.so) ace3 hypot (/usr/lib/libm-2.25.so) a4a main (a.out) std::abs<double> std::_Norm_helper<true>::_S_do_it<double> std::norm<double> main 20510 __libc_start_main (/usr/lib/libc-2.25.so) bd9 _start (a.out) $ addr2line -a -f -i -e /tmp/a.out a4a | c++filt 0x0000000000000a4a std::__complex_abs(doublecomplex ) /usr/include/c++/6.3.1/complex:589 double std::abs<double>(std::complex<double> const&) /usr/include/c++/6.3.1/complex:597 double std::_Norm_helper<true>::_S_do_it<double>(std::complex<double> const&) /usr/include/c++/6.3.1/complex:654 double std::norm<double>(std::complex<double> const&) /usr/include/c++/6.3.1/complex:664 main /tmp/inlining.cpp:14 ~~~~~ Note how `std::__complex_abs` is missing from the `perf script` output. This is similarly showing up in `perf report`. The patch here fixes this issue, and the output becomes: ~~~~~ a.out 26722 80836.309329: 72425 cycles: 21561 __hypot_finite (/usr/lib/libm-2.25.so) ace3 hypot (/usr/lib/libm-2.25.so) a4a main (a.out) std::__complex_abs std::abs<double> std::_Norm_helper<true>::_S_do_it<double> std::norm<double> main 20510 __libc_start_main (/usr/lib/libc-2.25.so) bd9 _start (a.out) ~~~~~ Signed-off-by:Milian Wolff <milian.wolff@kdab.com> Signed-off-by:
-
Milian Wolff authored
So far, the inlined nodes where only reversed when we built perf against libbfd. If that was not available, the addr2line fallback code path was missing the inline_list__reverse call. Now we always add the nodes in the correct order within inline_list__append. This removes the need to reverse the list and also ensures that all callers construct the list in the right order. Signed-off-by:
-
Namhyung Kim authored
The --inline option is to show inlined functions in callchains. For example: $ perf script a.out 5644 11611.467597: 309961 cycles:u: 790 main (/home/namhyung/tmp/perf/a.out) 20511 __libc_start_main (/usr/lib/libc-2.25.so) 8ba _start (/home/namhyung/tmp/perf/a.out) ... $ perf script --inline a.out 5644 11611.467597: 309961 cycles:u: 790 main (/home/namhyung/tmp/perf/a.out) std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator() std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> > main 20511 __libc_start_main (/usr/lib/libc-2.25.so) 8ba _start (/home/namhyung/tmp/perf/a.out) ... Reviewed-and-tested-by: -
Milian Wolff authored
As the documentation for dwfl_frame_pc says, frames that are no activation frames need to have their program counter decremented by one to properly find the function of the caller. This fixes many cases where perf report currently attributes the cost to the next line. I.e. I have code like this: ~~~~~~~~~~~~~~~ #include <thread> #include <chrono> using namespace std; int main() { this_thread::sleep_for(chrono::milliseconds(1000)); this_thread::sleep_for(chrono::milliseconds(100)); this_thread::sleep_for(chrono::milliseconds(10)); return 0; } ~~~~~~~~~~~~~~~ Now compile and record it: ~~~~~~~~~~~~~~~ g++ -std=c++11 -g -O2 test.cpp echo 1 | sudo tee /proc/sys/kernel/sched_schedstats perf record \ --event sched:sched_stat_sleep \ --event sched:sched_process_exit \ --event sched:sched_switch --call-graph=dwarf \ --output perf.data.raw \ ./a.out echo 0 | sudo tee /proc/sys/kernel/sched_schedstats perf inject --sched-stat --input perf.data.raw --output perf.data ~~~~~~~~~~~~~~~ Before this patch, the report clearly shows the off-by-one issue. Most notably, the last sleep invocation is incorrectly attributed to the "return 0;" line: ~~~~~~~~~~~~~~~ Overhead Source:Line ........ ........... 100.00% core.c:0 | ---__schedule core.c:0 schedule do_nanosleep hrtimer.c:0 hrtimer_nanosleep sys_nanosleep entry_SYSCALL_64_fastpath .tmp_entry_64.o:0 __nanosleep_nocancel .:0 std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323 | |--90.08%--main test.cpp:9 | __libc_start_main | _start | |--9.01%--main test.cpp:10 | __libc_start_main | _start | --0.91%--main test.cpp:13 __libc_start_main _start ~~~~~~~~~~~~~~~ With this patch here applied, the issue is fixed. The report becomes much more usable: ~~~~~~~~~~~~~~~ Overhead Source:Line ........ ........... 100.00% core.c:0 | ---__schedule core.c:0 schedule do_nanosleep hrtimer.c:0 hrtimer_nanosleep sys_nanosleep entry_SYSCALL_64_fastpath .tmp_entry_64.o:0 __nanosleep_nocancel .:0 std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323 | |--90.08%--main test.cpp:8 | __libc_start_main | _start | |--9.01%--main test.cpp:9 | __libc_start_main | _start | --0.91%--main test.cpp:10 __libc_start_main _start ~~~~~~~~~~~~~~~ Similarly it works for signal frames: ~~~~~~~~~~~~~~~ __noinline void bar(void) { volatile long cnt = 0; for (cnt = 0; cnt < 100000000; cnt++); } __noinline void foo(void) { bar(); } void sig_handler(int sig) { foo(); } int main(void) { signal(SIGUSR1, sig_handler); raise(SIGUSR1); foo(); return 0; } ~~~~~~~~~~~~~~~~ Before, the report wrongly points to `signal.c:29` after raise(): ~~~~~~~~~~~~~~~~ $ perf report --stdio --no-children -g srcline -s srcline ... 100.00% signal.c:11 | ---bar signal.c:11 | |--50.49%--main signal.c:29 | __libc_start_main | _start | --49.51%--0x33a8f raise .:0 main signal.c:29 __libc_start_main _start ~~~~~~~~~~~~~~~~ With this patch in, the issue is fixed and we instead get: ~~~~~~~~~~~~~~~~ 100.00% signal signal [.] bar | ---bar signal.c:11 | |--50.49%--main signal.c:29 | __libc_start_main | _start | --49.51%--0x33a8f raise .:0 main signal.c:27 __libc_start_main _start ~~~~~~~~~~~~~~~~ Note how this patch fixes this issue for both unwinding methods, i.e. both dwfl and libunwind. The former case is straight-forward thanks to dwfl_frame_pc(). For libunwind, we replace the functionality via unw_is_signal_frame() for any but the very first frame. Signed-off-by: -
Milian Wolff authored
When a filename was found in addr2line it was duplicated via strdup() but never freed. Now we pass NULL and handle this gracefully in addr2line. Detected by Valgrind: ==16331== 1,680 bytes in 21 blocks are definitely lost in loss record 148 of 220 ==16331== at 0x4C2AF1F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so) ==16331== by 0x672FA69: strdup (in /usr/lib/libc-2.25.so) ==16331== by 0x52769F: addr2line (srcline.c:256) ==16331== by 0x52769F: addr2inlines (srcline.c:294) ==16331== by 0x52769F: dso__parse_addr_inlines (srcline.c:502) ==16331== by 0x574D7A: inline__fprintf (hist.c:41) ==16331== by 0x574D7A: ipchain__fprintf_graph (hist.c:147) ==16331== by 0x57518A: __callchain__fprintf_graph (hist.c:212) ==16331== by 0x5753CF: callchain__fprintf_graph.constprop.6 (hist.c:337) ==16331== by 0x57738E: hist_entry__fprintf (hist.c:628) ==16331== by 0x57738E: hists__fprintf (hist.c:882) ==16331== by 0x44A20F: perf_evlist__tty_browse_hists (builtin-report.c:399) ==16331== by 0x44A20F: report__browse_hists (builtin-report.c:491) ==16331== by 0x44A20F: __cmd_report (builtin-report.c:624) ==16331== by 0x44A20F: cmd_report (builtin-report.c:1054) ==16331== by 0x4A49CE: run_builtin (perf.c:296) ==16331== by 0x4A4CC0: handle_internal_command (perf.c:348) ==16331== by 0x434371: run_argv (perf.c:392) ==16331== by 0x434371: main (perf.c:530) Signed-off-by:
-
Milian Wolff authored
I just hit a segfault when doing `perf report -g srcline`. Valgrind pointed me at this code as the culprit: ==8359== Invalid read of size 8 ==8359== at 0x3096D9: map__rip_2objdump (map.c:430) ==8359== by 0x2FC1A3: match_chain_srcline (callchain.c:645) ==8359== by 0x2FC1A3: match_chain (callchain.c:700) ==8359== by 0x2FC1A3: append_chain (callchain.c:895) ==8359== by 0x2FC1A3: append_chain_children (callchain.c:846) ==8359== by 0x2FF719: callchain_append (callchain.c:944) ==8359== by 0x2FF719: hist_entry__append_callchain (callchain.c:1058) ==8359== by 0x32FA06: iter_add_single_cumulative_entry (hist.c:908) ==8359== by 0x33195C: hist_entry_iter__add (hist.c:1050) ==8359== by 0x258F65: process_sample_event (builtin-report.c:204) ==8359== by 0x30D60C: perf_session__deliver_event (session.c:1310) ==8359== by 0x30D60C: ordered_events__deliver_event (session.c:119) ==8359== by 0x310D12: __ordered_events__flush (ordered-events.c:210) ==8359== by 0x310D12: ordered_events__flush.part.3 (ordered-events.c:277) ==8359== by 0x30DD3C: perf_session__process_user_event (session.c:1349) ==8359== by 0x30DD3C: perf_session__process_event (session.c:1475) ==8359== by 0x30FC3C: __perf_session__process_events (session.c:1867) ==8359== by 0x30FC3C: perf_session__process_events (session.c:1921) ==8359== by 0x25A985: __cmd_report (builtin-report.c:575) ==8359== by 0x25A985: cmd_report (builtin-report.c:1054) ==8359== by 0x2B9A80: run_builtin (perf.c:296) ==8359== Address 0x70 is not stack'd, malloc'd or (recently) free'd This patch fixes the issue. Signed-off-by:
-
- 23 May, 2017 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Fix the i2c-designware regression of rc2. Also, a DMA buffer fix for the tiny-usb driver where the USB core now loudly complains about the non DMA-capable buffer" [ I had cherry-picked the designware fix separately because it hit my laptop, but here is the proper sync with the i2c tree - Linus ] * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Fix bogus sda_hold_time due to uninitialized vars i2c: i2c-tiny-usb: fix buffer not being DMA capable
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes a regression in the skcipher interface that allows bogus key parameters to hit underlying implementations which can cause crashes" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: skcipher - Add missing API setkey checks
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fix from Kees Cook: "Marta noticed another misbehavior in EFI pstore, which this fixes. Hopefully this is the last of the v4.12 fixes for pstore!" * tag 'pstore-v4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: efi-pstore: Fix write/erase id tracking
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These revert a 4.11 change that turned out to be problematic and add a .gitignore file. Specifics: - Revert a 4.11 commit related to the ACPI-based handling of laptop lids that made changes incompatible with existing user space stacks and broke things there (Lv Zheng). - Add .gitignore to the ACPI tools directory (Prarit Bhargava)" * tag 'acpi-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / button: Remove lid_init_state=method mode" tools/power/acpi: Add .gitignore file -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix RTC wakeup from suspend-to-idle broken recently, fix CPU idleness detection condition in the schedutil cpufreq governor, fix a cpufreq driver build failure, fix an error code path in the power capping framework, clean up the hibernate core and update the intel_pstate documentation. Specifics: - Fix RTC wakeup from suspend-to-idle broken by the recent rework of ACPI wakeup handling (Rafael Wysocki). - Update intel_pstate driver documentation to reflect the current code and explain how it works in more detail (Rafael Wysocki). - Fix an issue related to CPU idleness detection on systems with shared cpufreq policies in the schedutil governor (Juri Lelli). - Fix a possible build issue in the dbx500 cpufreq driver (Arnd Bergmann). - Fix a function in the power capping framework core to return an error code instead of 0 when there's an error (Dan Carpenter). - Clean up variable definition in the hibernation core (Pushkar Jambhlekar)" * tag 'pm-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: dbx500: add a Kconfig symbol PM / hibernate: Declare variables as static PowerCap: Fix an error code in powercap_register_zone() RTC: rtc-cmos: Fix wakeup from suspend-to-idle PM / wakeup: Fix up wakeup_source_report_event() cpufreq: intel_pstate: Document the current behavior and user interface cpufreq: schedutil: use now as reference when aggregating shared policy requests -
Jan Kiszka authored
We need to initializes those variables to 0 for platforms that do not provide ACPI parameters. Otherwise, we set sda_hold_time to random values, breaking e.g. Galileo and IOT2000 boards. Reported-and-tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reported-by:
Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Fixes: 9d640843 ("i2c: designware: don't infer timings described by ACPI from clock rate") Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
- 22 May, 2017 16 commits
-
-
Kees Cook authored
Prior to the pstore interface refactoring, the "id" generated during a backend pstore_write() was only retained by the internal pstore inode tracking list. Additionally the "part" was ignored, so EFI would encode this in the id. This corrects the misunderstandings and correctly sets "id" during pstore_write(), and uses "part" directly during pstore_erase(). Reported-by:
Marta Lofstedt <marta.lofstedt@intel.com> Fixes: 76cc9580 ("pstore: Replace arguments for write() API") Fixes: a61072aa ("pstore: Replace arguments for erase() API") Signed-off-by:
Kees Cook <keescook@chromium.org> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Mostly netfilter bug fixes in here, but we have some bits elsewhere as well. 1) Don't do SNAT replies for non-NATed connections in IPVS, from Julian Anastasov. 2) Don't delete conntrack helpers while they are still in use, from Liping Zhang. 3) Fix zero padding in xtables's xt_data_to_user(), from Willem de Bruijn. 4) Add proper RCU protection to nf_tables_dump_set() because we cannot guarantee that we hold the NFNL_SUBSYS_NFTABLES lock. From Liping Zhang. 5) Initialize rcv_mss in tcp_disconnect(), from Wei Wang. 6) smsc95xx devices can't handle IPV6 checksums fully, so don't advertise support for offloading them. From Nisar Sayed. 7) Fix out-of-bounds access in __ip6_append_data(), from Eric Dumazet. 8) Make atl2_probe() propagate the error code properly on failures, from Alexey Khoroshilov. 9) arp_target[] in bond_check_params() is used uninitialized. This got changes from a global static to a local variable, which is how this mistake happened. Fix from Jarod Wilson. 10) Fix fallout from unnecessary NULL check removal in cls_matchall, from Jiri Pirko. This is definitely brown paper bag territory..." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) net: sched: cls_matchall: fix null pointer dereference vsock: use new wait API for vsock_stream_sendmsg() bonding: fix randomly populated arp target array net: Make IP alignment calulations clearer. bonding: fix accounting of active ports in 3ad net: atheros: atl2: don't return zero on failure path in atl2_probe() ipv6: fix out of bound writes in __ip6_append_data() bridge: start hello_timer when enabling KERNEL_STP in br_stp_start smsc95xx: Support only IPv4 TCP/UDP csum offload arp: always override existing neigh entries with gratuitous ARP arp: postpone addr_type calculation to as late as possible arp: decompose is_garp logic into a separate function arp: fixed error in a comment tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0 netfilter: xtables: fix build failure from COMPAT_XT_ALIGN outside CONFIG_COMPAT ebtables: arpreply: Add the standard target sanity check netfilter: nf_tables: revisit chain/object refcounting from elements netfilter: nf_tables: missing sanitization in data from userspace netfilter: nf_tables: can't assume lock is acquired when dumping set elems netfilter: synproxy: fix conntrackd interaction ... -
Jiri Pirko authored
Since the head is guaranteed by the check above to be null, the call_rcu would explode. Remove the previously logically dead code that was made logically very much alive and kicking. Fixes: 985538ee ("net/sched: remove redundant null check on head") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WANG Cong authored
As reported by Michal, vsock_stream_sendmsg() could still sleep at vsock_stream_has_space() after prepare_to_wait(): vsock_stream_has_space vmci_transport_stream_has_space vmci_qpair_produce_free_space qp_lock qp_acquire_queue_mutex mutex_lock Just switch to the new wait API like we did for commit d9dc8b0f ("net: fix sleeping for sk_wait_event()"). Reported-by:Michal Kubecek <mkubecek@suse.cz> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Jarod Wilson authored
In commit dc9c4d0f, the arp_target array moved from a static global to a local variable. By the nature of static globals, the array used to be initialized to all 0. At present, it's full of random data, which that gets interpreted as arp_target values, when none have actually been specified. Systems end up booting with spew along these lines: [ 32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready [ 32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready [ 32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0 [ 32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready [ 32.204892] lacp0: Setting MII monitoring interval to 100 [ 32.211071] lacp0: Removing ARP target 216.124.228.17 [ 32.216824] lacp0: Removing ARP target 218.160.255.255 [ 32.222646] lacp0: Removing ARP target 185.170.136.184 [ 32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal [ 32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255) [ 32.243987] lacp0: Removing ARP target 56.125.228.17 [ 32.249625] lacp0: Removing ARP target 218.160.255.255 [ 32.255432] lacp0: Removing ARP target 15.157.233.184 [ 32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal [ 32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255) [ 32.276632] lacp0: Removing ARP target 16.0.0.0 [ 32.281755] lacp0: Removing ARP target 218.160.255.255 [ 32.287567] lacp0: Removing ARP target 72.125.228.17 [ 32.293165] lacp0: Removing ARP target 218.160.255.255 [ 32.298970] lacp0: Removing ARP target 8.125.228.17 [ 32.304458] lacp0: Removing ARP target 218.160.255.255 None of these were actually specified as ARP targets, and the driver does seem to clean up the mess okay, but it's rather noisy and confusing, leaks values to userspace, and the 255.255.255.255 spew shows up even when debug prints are disabled. The fix: just zero out arp_target at init time. While we're in here, init arp_all_targets_value in the right place. Fixes: dc9c4d0f ("bonding: reduce scope of some global variables") CC: Mahesh Bandewar <maheshb@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Acked-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Rafael J. Wysocki authored
* pm-sleep: PM / hibernate: Declare variables as static RTC: rtc-cmos: Fix wakeup from suspend-to-idle PM / wakeup: Fix up wakeup_source_report_event() * powercap: PowerCap: Fix an error code in powercap_register_zone()
-
Rafael J. Wysocki authored
* acpi-button: Revert "ACPI / button: Remove lid_init_state=method mode" * acpi-tools: tools/power/acpi: Add .gitignore file
-
Rafael J. Wysocki authored
* intel_pstate: cpufreq: intel_pstate: Document the current behavior and user interface * pm-cpufreq: cpufreq: dbx500: add a Kconfig symbol * pm-cpufreq-sched: cpufreq: schedutil: use now as reference when aggregating shared policy requests
-
David S. Miller authored
The assignmnet: ip_align = strict ? 2 : NET_IP_ALIGN; in compare_pkt_ptr_alignment() trips up Coverity because we can only get to this code when strict is true, therefore ip_align will always be 2 regardless of NET_IP_ALIGN's value. So just assign directly to '2' and explain the situation in the comment above. Reported-by:
"Gustavo A. R. Silva" <garsilva@embeddedor.com> Signed-off-by:
-
Jarod Wilson authored
As of 7bb11dc9 and 0622cab0, bond slaves in a 3ad bond are not removed from the aggregator when they are down, and the active slave count is NOT equal to number of ports in the aggregator, but rather the number of ports in the aggregator that are still enabled. The sysfs spew for bonding_show_ad_num_ports() has a comment that says "Show number of active 802.3ad ports.", but it's currently showing total number of ports, both active and inactive. Remedy it by using the same logic introduced in 0622cab0 in __bond_3ad_get_active_agg_info(), so sysfs, procfs and netlink all report the number of active ports. Note that this means that IFLA_BOND_AD_INFO_NUM_PORTS really means NUM_ACTIVE_PORTS instead of NUM_PORTS, and thus perhaps should be renamed for clarity. Lightly tested on a dual i40e lacp bond, simulating link downs with an ip link set dev <slave2> down, was able to produce the state where I could see both in the same aggregator, but a number of ports count of 1. MII Status: up Active Aggregator Info: Aggregator ID: 1 Number of ports: 2 <--- Slave Interface: ens10 MII Status: up <--- Aggregator ID: 1 Slave Interface: ens11 MII Status: up Aggregator ID: 1 MII Status: up Active Aggregator Info: Aggregator ID: 1 Number of ports: 1 <--- Slave Interface: ens10 MII Status: down <--- Aggregator ID: 1 Slave Interface: ens11 MII Status: up Aggregator ID: 1 CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org Signed-off-by:
-
Alexey Khoroshilov authored
If dma mask checks fail in atl2_probe(), it breaks off initialization, deallocates all resources, but returns zero. The patch adds proper error code return value and make error code setup unified. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Eric Dumazet authored
Andrey Konovalov and idaifish@gmail.com reported crashes caused by one skb shared_info being overwritten from __ip6_append_data() Andrey program lead to following state : copy -4200 datalen 2000 fraglen 2040 maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200 The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen, fraggap, 0); is overwriting skb->head and skb_shared_info Since we apparently detect this rare condition too late, move the code earlier to even avoid allocating skb and risking crashes. Once again, many thanks to Andrey and syzkaller team. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
-
Jan Kiszka authored
We need to initializes those variables to 0 for platforms that do not provide ACPI parameters. Otherwise, we set sda_hold_time to random values, breaking e.g. Galileo and IOT2000 boards. Fixes: 9d640843 ("i2c: designware: don't infer timings described by ACPI from clock rate") Signed-off-by:
-
Sebastian Reichel authored
Since v4.9 i2c-tiny-usb generates the below call trace and longer works, since it can't communicate with the USB device. The reason is, that since v4.9 the USB stack checks, that the buffer it should transfer is DMA capable. This was a requirement since v2.2 days, but it usually worked nevertheless. [ 17.504959] ------------[ cut here ]------------ [ 17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.506545] transfer buffer not dma capable [ 17.507022] Modules linked in: [ 17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10 [ 17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 17.509039] Call Trace: [ 17.509320] ? dump_stack+0x5c/0x78 [ 17.509714] ? __warn+0xbe/0xe0 [ 17.510073] ? warn_slowpath_fmt+0x5a/0x80 [ 17.510532] ? nommu_map_sg+0xb0/0xb0 [ 17.510949] ? usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.511482] ? usb_hcd_submit_urb+0x336/0xab0 [ 17.511976] ? wait_for_completion_timeout+0x12f/0x1a0 [ 17.512549] ? wait_for_completion_timeout+0x65/0x1a0 [ 17.513125] ? usb_start_wait_urb+0x65/0x160 [ 17.513604] ? usb_control_msg+0xdc/0x130 [ 17.514061] ? usb_xfer+0xa4/0x2a0 [ 17.514445] ? __i2c_transfer+0x108/0x3c0 [ 17.514899] ? i2c_transfer+0x57/0xb0 [ 17.515310] ? i2c_smbus_xfer_emulated+0x12f/0x590 [ 17.515851] ? _raw_spin_unlock_irqrestore+0x11/0x20 [ 17.516408] ? i2c_smbus_xfer+0x125/0x330 [ 17.516876] ? i2c_smbus_xfer+0x125/0x330 [ 17.517329] ? i2cdev_ioctl_smbus+0x1c1/0x2b0 [ 17.517824] ? i2cdev_ioctl+0x75/0x1c0 [ 17.518248] ? do_vfs_ioctl+0x9f/0x600 [ 17.518671] ? vfs_write+0x144/0x190 [ 17.519078] ? SyS_ioctl+0x74/0x80 [ 17.519463] ? entry_SYSCALL_64_fastpath+0x1e/0xad [ 17.519959] ---[ end trace d047c04982f5ac50 ]--- Cc: <stable@vger.kernel.org> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Till Harbaum <till@harbaum.org> Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
The code to fetch a 64-bit value from user space was entirely buggered, and has been since the code was merged in early 2016 in commit b2f68038 ("x86/mm/32: Add support for 64-bit __get_user() on 32-bit kernels"). Happily the buggered routine is almost certainly entirely unused, since the normal way to access user space memory is just with the non-inlined "get_user()", and the inlined version didn't even historically exist. The normal "get_user()" case is handled by external hand-written asm in arch/x86/lib/getuser.S that doesn't have either of these issues. There were two independent bugs in __get_user_asm_u64(): - it still did the STAC/CLAC user space access marking, even though that is now done by the wrapper macros, see commit 11f1a4b9 ("x86: reorganize SMAP handling in user space accesses"). This didn't result in a semantic error, it just means that the inlined optimized version was hugely less efficient than the allegedly slower standard version, since the CLAC/STAC overhead is quite high on modern Intel CPU's. - the double register %eax/%edx was marked as an output, but the %eax part of it was touched early in the asm, and could thus clobber other inputs to the asm that gcc didn't expect it to touch. In particular, that meant that the generated code could look like this: mov (%eax),%eax mov 0x4(%eax),%edx where the load of %edx obviously was _supposed_ to be from the 32-bit word that followed the source of %eax, but because %eax was overwritten by the first instruction, the source of %edx was basically random garbage. The fixes are trivial: remove the extraneous STAC/CLAC entries, and mark the 64-bit output as early-clobber to let gcc know that no inputs should alias with the output register. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@kernel.org # v4.8+ Signed-off-by:
-
- 21 May, 2017 1 commit
-
-
Linus Torvalds authored
Al noticed that unsafe_put_user() had type problems, and fixed them in commit a7cc722f ("fix unsafe_put_user()"), which made me look more at those functions. It turns out that unsafe_get_user() had a type issue too: it limited the largest size of the type it could handle to "unsigned long". Which is fine with the current users, but doesn't match our existing normal get_user() semantics, which can also handle "u64" even when that does not fit in a long. While at it, also clean up the type cast in unsafe_put_user(). We actually want to just make it an assignment to the expected type of the pointer, because we actually do want warnings from types that don't convert silently. And it makes the code more readable by not having that one very long and complex line. [ This patch might become stable material if we ever end up back-porting any new users of the unsafe uaccess code, but as things stand now this doesn't matter for any current existing uses. ] Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
