- 16 Dec, 2013 13 commits
-
-
Neerav Parikh authored
Remove FCoE code from the VF interface, as the feature will not be supported on VF interfaces. Change-Id: Ie9db04fa2e37fa14ac3e73a9c20980348d931357 Signed-off-by:
Neerav Parikh <Neerav.Parikh@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
Add basic support for handling suspend and resume. We'll add Wake-on-LAN support later. Change-Id: Iea5e11c81bd9289a5bdbf086de8f626911a0b5ce Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Signed-off-by:
-
Anjali Singhai Jain authored
Any user-initiated path which eventually calls reset needs to hold the rtnl_lock, so add functionality to do that. Be careful not to use the safe reset when cleaning up from the diagnostic tests, which avoids rtnl_lock recursion from ethtool. Protect the reset_task with rtnl_lock, since it runs from a work item. Change-Id: Ib6e7a3fb2966809db2daf35fd5a123ccdf6f6f0f Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by:
-
Anjali Singhai Jain authored
Implement the number of receive/transmit queue pair being changed on the fly by ethtool. Change-Id: I70df2363f1ca40b63610baa561c5b6b92b81bca7 Signed-off-by:
-
Anjali Singhai Jain authored
This is the second of 3 patches that allows for changing the number of queues in the driver on the fly. This patch adds a function that calls the reinit flow for the main VSI after making changes to the RSS queue count as requested by the user. Change-Id: I82dee91e9fe90eeb4e84a7369f4b8b342155dd85 Signed-off-by:
-
Anjali Singhai Jain authored
This patch is the first in a 3 series patchset to implement dynamically changing the queue count for the main VSI. This patch starts by adding a reinit flow. This flow is designed to be able to change just the queue count and not the number of interrupt vectors that the device originally came up with. Change-Id: I0634aaebf7dc4dd6c66af8f9dbbef89d7beac438 Signed-off-by:
-
Jesse Brandeburg authored
The current driver default sets the number of transmit/receive queue pairs based on the current node's CPU count. A better method is to use the total number of CPUs in the system to suggest the number of queue pairs, which aligns better with the behavior of ixgbe, and also with the expectations of the kernel XPS and other subsystems in the stack. Change-Id: If3e20c7f100f13e51d69762594d948f247ffe0c8 Signed-off-by:
-
Jesse Brandeburg authored
Prevent some compiler warnings and implement some other trivial fixes. Change-Id: I7f49d79b91b94df1ad4a8306a0410ed72238845f Signed-off-by:
-
Jesse Brandeburg authored
Refactor flow control set up and disable L2 flow control by default. Change-Id: I2fe257b80df6d9a1e37deb4df118da8f8467040d Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by:
-
Anjali Singhai Jain authored
Call the netif_set_real* functions in order to make sure the stack knows about how many queues we have, in order for RFS/RPS/XFS to work correctly. Change-Id: Ib7a7b2792f80c5eef210dedf42cc6607d63953d2 Signed-off-by:
-
Shannon Nelson authored
When the ethtool testing starts it sets the I40E_TESTING state bit, which blocks new netdev opens so that things don't get confused, while the testing might be messing with register and other things. Unfortunately, that was keeping the PF resets after the register test from working correctly because the netdev would not get reopened. This patch reorders the tests to put the register test last as it is the only one that needs a reset, and we wait to trigger the reset until after we clear the I40E_TESTING bit. Change-Id: Ieaa18d74264250ac336b0656b490125ee8a22d2a Signed-off-by:
-
Jesse Brandeburg authored
Get some more reasonable information reported back out to ethtool for the different types of connections supported. Change-Id: I57b153f86b9cdd04ad7cb5bf7d1c45873c196a7a Signed-off-by:
-
Jerry Chu authored
It was reported that Commit 299603e8 ("net-gro: Prepare GRO stack for the upcoming tunneling support") triggered a compiler warning in ipv6_exthdrs_len(): net/ipv6/ip6_offload.c: In function ‘ipv6_gro_complete’: net/ipv6/ip6_offload.c:178:24: warning: ‘optlen’ may be used uninitialized in this function [-Wmaybe-u opth = (void *)opth + optlen; ^ net/ipv6/ip6_offload.c:164:22: note: ‘optlen’ was declared here int len = 0, proto, optlen; ^ Note that there was no real bug here - optlen was never uninitialized before use. (Was the version of gcc I used smarter to not complain?) Reported-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
H.K. Jerry Chu <hkchu@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 15 Dec, 2013 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-nextDavid S. Miller authored
Ben Hutchings says: ==================== 1. Change PTP clock name to 'sfc'. 2. Complete support for hardware timestamping and PTP clock on the SFC9100 family. 3. Various cleanups for the PTP code. ==================== Signed-off-by:
-
- 14 Dec, 2013 26 commits
-
-
Hannes Frederic Sowa authored
Commit 299603e8 ("net-gro: Prepare GRO stack for the upcoming tunneling support") used an uninitialized variable which leads to the following compiler warning: net/ipv6/ip6_offload.c: In function ‘ipv6_gro_complete’: net/ipv6/ip6_offload.c:178:24: warning: ‘optlen’ may be used uninitialized in this function [-Wmaybe-uninitialized] opth = (void *)opth + optlen; ^ net/ipv6/ip6_offload.c:164:22: note: ‘optlen’ was declared here int len = 0, proto, optlen; ^ Fix it up. Cc: Jerry Chu <hkchu@google.com> Signed-off-by:
-
David S. Miller authored
Ding Tianhong says: ==================== bonding: rebuild the lock use for bond monitor Now the bond slave list is not protected by bond lock, only by RTNL, but the monitor still use the bond lock to protect the slave list, it is useless, according to the Veaceslav's opinion, there were three way to fix the protect problem: 1. add bond_master_upper_dev_link() and bond_upper_dev_unlink() in bond->lock, but it is unsafe to call call_netdevice_notifiers() in write lock. 2. remove unused bond->lock for monitor function, only use the exist rtnl lock(), it will take performance loss in fast path. 3. use RCU to protect the slave list, of course, performance is better, but in slow path, it is ignored. obviously the solution 1 is not fit here, I will consider the 2 and 3 solution. My principle is simple, if in fast path, RCU is better, otherwise in slow path, both is well, but according to the Jay Vosburgh's opinion, the monitor will loss performace if use RTNL to protect the all slave list, so remove the bond lock and replace with RCU. The second problem is the curr_slave_lock for bond, it is too old and unwanted in many place, because the curr_active_slave would only be changed in 3 place: 1. enslave slave. 2. release slave. 3. change active slave. all above were already holding bond lock, RTNL and curr_slave_lock together, it is tedious and no need to add so mach lock, when change the curr_active_slave, you have to hold the RTNL and curr_slave_lock together, and when you read the curr_active_slave, RTNL or curr_slave_lock, any one of them is no problem. for the stability, I did not change the logic for the monitor, all change is clear and simple, I have test the patch set for lockdep, it work well and stability. v2. accept the Jay Vosburgh's opinion, remove the RTNL and replace with RCU, also add some rcu function for bond use, so the patch set reach 10. v3. accept the Nikolay Aleksandrov's opinion, remove no needed bond_has_slave_rcu(), add protection for several 3ad mode handler functions and current_arp_slave. rebuild the bond_first_slave_rcu(), make it more clear. v4. because the struct netdev_adjacent should not be exist in netdevice.h, so I have to make a new function to support micro bond_first_slave_rcu(). also add a new patch to simplify the bond_resend_igmp_join_requests_delayed(). v5. according the Jay Vosburgh's opinion, in patch 2 and 6, the calling of notify peer is hardly to happen with the bond_xxx_commit() when the monitoring is running, so the performance impact about make two round trips to one trip on RTNL is minimal, no need to do that,the reason is very clear, so modify the patch 2 and 6, recover the notify peer in RTNL alone. ==================== Signed-off-by:Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
-
dingtianhong authored
The bond_resend_igmp_join_requests_delayed() and bond_resend_igmp_join_requests() should be integrated, because the bond_resend_igmp_join_requests_delayed() did nothing except bond_resend_igmp_join_requests(). The bond igmp_retrans could only be changed in bond_change_active_slave and here, bond_change_active_slave will be called in RTNL and curr_slave_lock, the bond_resend_igmp_join_requests already hold RTNL, so no need to free RTNL and hold curr_slave_lock again, it may be a small optimization, so move the igmp_retrans in RTNL and remove the curr_slave_lock. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
dingtianhong authored
The bond_select_active_slave() will not release and acquire bond lock, so it is no need to read the bond lock for them, and the bond_store_primaryxxx() is already in RTNL, so remove the unwanted lock. Suggested-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
-
dingtianhong authored
The bond_option_active_slave_set() is always called in RTNL, the RTNL could protect bond slave list, so remove the unwanted bond lock. Suggested-by:
-
dingtianhong authored
The bond_3ad_state_machine_handler() use the bond lock to protect the bond slave list and slave port together, but it is not enough, the bond slave list was link and unlink in RTNL, not bond lock, so I add RCU to protect the slave list from leaving. The bond lock is still used here, because when the slave has been removed from the list by the time the state machine runs, it appears to be possible for both function to manupulate the same aggregator->lag_ports by finding the aggregator via two different ports that are both members of that aggregator (i.e., port A of the agg is being unbound, and port B of the agg is runing its state machine). If I remove the bond lock, there are nothing to mutex changes to aggregator->lag_ports between bond_3ad_state_machine_handler and bond_3ad_unbind_slave, So the bond lock is the simplest way to protect aggregator->lag_ports. There was a lot of function need RCU protect, I have two choice to make the function in RCU-safe, (1) create new similar functions and make the bond slave list in RCU. (2) modify the existed functions and make them in read-side critical section, because the RCU read-side critical sections may be nested. I choose (2) because it is no need to create more similar functions. The nots in the function is still too old, clean up the nots. Suggested-by:
Nikolay Aleksandrov <nikolay@redhat.com> Suggested-by:
-
dingtianhong authored
The bond_change_active_slave() and bond_select_active_slave() do't need bond lock anymore, so remove the unwanted bond lock for these two functions. The bond_select_active_slave() will release and acquire curr_slave_lock, so the curr_slave_lock need to protect the function. In bond enslave and bond release, the bond slave list is also protected by RTNL, so bond lock is no need to exist, remove the lock and clean the functions. Suggested-by:
-
dingtianhong authored
The bond_activebackup_arp_mon() use the bond lock for read to protect the slave list, it is no effect, and the RTNL is only called for bond_ab_arp_commit() and peer notify, for the performance better, use RCU to replace with the bond lock, to the bond slave list need to called in RCU, add a new bond_first_slave_rcu() to get the first slave in RCU protection. In bond_ab_arp_probe(), the bond->current_arp_slave may changd if bond release slave, just like: bond_ab_arp_probe() bond_release() cpu 0 cpu 1 ... if (bond->current_arp_slave...) ... ... bond->current_arp_slave = NULl bond->current_arp_slave->dev->name ... So the current_arp_slave need to dereference in the section. Suggested-by: -
dingtianhong authored
The bond_first_slave_rcu() will be used to instead of bond_first_slave() in rcu_read_lock(). According to the Jay Vosburgh's suggestion, the struct netdev_adjacent should hide from users who wanted to use it directly. so I package a new function to get the first slave of the bond. Suggested-by:
-
dingtianhong authored
The bond_loadbalance_arp_mon() use the bond lock to protect the bond slave list, it is no effect, so I could use RTNL or RCU to replace it, considering the performance impact, the RCU is more better here, so the bond lock replace with the RCU. The bond_select_active_slave() need RTNL and curr_slave_lock together, but there is no RTNL lock here, so add a rtnl_rtylock. Suggested-by:
-
dingtianhong authored
The bond_alb_monitor use bond lock to protect the bond slave list, it is no effect here, we need to use RTNL or RCU to replace bond lock, the bond_alb_monitor will called 10 times one second, RTNL may loss performance here, so I replace bond lock with RCU to protect the bond slave list, also the RTNL is preserved, the logic of the monitor did not changed. Suggested-by:
-
dingtianhong authored
The bond_mii_monitor() still use bond lock to protect bond slave list, it is no effect, I have 2 way to fix the problem, move the RTNL to the top of the function, or add RCU to protect the bond slave list, according to the Jay Vosburgh's opinion, 10 times one second is a truely big performance loss if use RTNL to protect the whole monitor, so I would take the advice and use RCU to protect the bond slave list. The bond_has_slave() will not protect by anything, there will no things happen if the slave list is be changed, unless the bond was free, but it will not happened before the monitor, the bond will closed before be freed. The peers notify for the bond will calling curr_active_slave, so derefence the slave to make sure we will accessing the same slave if the curr_active_slave changed, as the rcu dereference need in read-side critical sector and bond_change_active_slave() will call it with no RCU hold, so add peer notify in rcu_read_lock which will be nested in monitor. Suggested-by:
-
dingtianhong authored
The bond slave list was no longer protected by bond lock and only protected by RTNL or RCU, so anywhere that use bond lock to protect slave list is meaningless. remove the release and acquire bond lock for bond_select_active_slave(). The curr_active_slave could only be changed in 3 place: 1. enslave slave. 2. release slave. 3. change_active_slave. all above place were holding bond lock, RTNL and curr_slave_lock together, it is tedious and meaningless, obviously bond lock is no need here, but RTNL or curr_slave_lock is needed, so if you want to access active slave, you have to choose one lock, RTNL or curr_slave_lock, if RTNL is exist, no need to add curr_slave_lock, otherwise curr_slave_lock is better, because of the performance. there are several place calling bond_select_active_slave() and bond_change_active_slave(), the next step I will clean these place and remove the no effect lock. there are some document changed together when update the function. Suggested-by:
-
Eric Dumazet authored
After commit 95dc1929 ("pkt_sched: give visibility to mq slave qdiscs") we call disc_list_add() while the device qdisc might be the noop_qdisc one. This shows up as duplicates in "tc qdisc show", as all inactive devices point to noop_qdisc. Fix this by setting dev->qdisc to the new qdisc before calling ops->change() in attach_default_qdiscs() Add a WARN_ON_ONCE() to catch any future similar problem. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-nextDavid S. Miller authored
Ben Hutchings says: ==================== An assortment of changes for Linux 3.14: 1. Merge the sfc fixes that you have already merged into net.git. (The branch point for those was such that this does not bring in any other changes.) 2. Reduce log level for a generally useless warning message, from Robert Stonehouse. 3. Include BISTs in ethtool offline self-test for EF10 and recover from BISTs initiated through other functions, from Jon Cooper. 4. Improve a sanity check on RX completions. 5. Avoid incrementing RX dropped count while the interface is down, from Jon Cooper. 6. Improve hardware sensor naming and log messages, from Edward Cree. 7. Log all unexpected errors returned by firmware, from Edward Cree. 8. Expose another NVRAM partition to userland. 9. Some refactoring of the PTP code in preparation for EF10 support. 10. Various minor cleanups. ==================== Signed-off-by: -
David S. Miller authored
Scott Feldman says: ==================== bonding: add more netlink attributes v2: Addressed v1 review comments. In particular, Jay's concern about current sysfs ordering limitations carrying over to iproute. Netlink attributes are processed in a priority order in bond_netlink.c:bond_changelink(). Lower priority attributes can't undo higher priority attributes when attempting to set both with iproute command. For example, this command will fail: ip link add bond1 type bond mode active-backup miimon 10 arp_interval 10 Because we're trying to create a new bond to use incompatible miimon and ARP interval attributes. However, if attributes are applied one-at-a-time, previously applied attributes can be overridden: ip link add bond1 type bond mode active-backup miimon 10 ip link set dev bond1 type bond arp_interval 10 These two commands succeed. The bond is first created to use miimon. Next, the bond is converted to use ARP interval, which undoes miimon. v1: Following Jiri Pirko's lead, add more bonding netlink attributes. Sending matching iproute2 patch separately. sysfs access to attributes is retained. ==================== Signed-off-by: -
sfeldma@cumulusnetworks.com authored
Add IFLA_BOND_ARP_ALL_TARGETS to allow get/set of bonding parameter arp_all_targets via netlink. Signed-off-by:
Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
sfeldma@cumulusnetworks.com authored
Add IFLA_BOND_ARP_VALIDATE to allow get/set of bonding parameter arp_validate via netlink. Signed-off-by:
-
sfeldma@cumulusnetworks.com authored
Add IFLA_BOND_ARP_IP_TARGET to allow get/set of bonding parameter arp_ip_target via netlink. Signed-off-by:
-
sfeldma@cumulusnetworks.com authored
Add IFLA_BOND_ARP_INTERVAL to allow get/set of bonding parameter arp_interval via netlink. Signed-off-by:
-
sfeldma@cumulusnetworks.com authored
Add IFLA_BOND_USE_CARRIER to allow get/set of bonding parameter use_carrier via netlink. Signed-off-by:
-
sfeldma@cumulusnetworks.com authored
Add IFLA_BOND_DOWNDELAY to allow get/set of bonding parameter downdelay via netlink. Signed-off-by:
-
sfeldma@cumulusnetworks.com authored
Add IFLA_BOND_UPDELAY to allow get/set of bonding parameter updelay via netlink. Signed-off-by:
-
sfeldma@cumulusnetworks.com authored
Add IFLA_BOND_MIIMON to allow get/set of bonding parameter miimon via netlink. Signed-off-by:
-
Li Zhong authored
This patches fixes the following warning by replacing smp_processor_id() with raw_smp_processor_id(): [ 11.120893] BUG: using smp_processor_id() in preemptible [00000000] code: arping/3510 [ 11.120913] caller is .packet_sendmsg+0xc14/0xe68 [ 11.120920] CPU: 13 PID: 3510 Comm: arping Not tainted 3.13.0-rc3-next-20131211-dirty #1 [ 11.120926] Call Trace: [ 11.120932] [c0000001f803f6f0] [c0000000000138dc] .show_stack+0x110/0x25c (unreliable) [ 11.120942] [c0000001f803f7e0] [c00000000083dd24] .dump_stack+0xa0/0x37c [ 11.120951] [c0000001f803f870] [c000000000493fd4] .debug_smp_processor_id+0xfc/0x12c [ 11.120959] [c0000001f803f900] [c0000000007eba78] .packet_sendmsg+0xc14/0xe68 [ 11.120968] [c0000001f803fa80] [c000000000700968] .sock_sendmsg+0xa0/0xe0 [ 11.120975] [c0000001f803fbf0] [c0000000007014d8] .SyS_sendto+0x100/0x148 [ 11.120983] [c0000001f803fd60] [c0000000006fff10] .SyS_socketcall+0x1c4/0x2e8 [ 11.120990] [c0000001f803fe30] [c00000000000a1e4] syscall_exit+0x0/0x9c Signed-off-by:
Li Zhong <zhong@linux.vnet.ibm.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
stephen hemminger authored
Add support to netconf to show changes to proxy-arp status on a per interface basis via netlink in a manner similar to forwarding and reverse path state. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
