- 01 Sep, 2022 32 commits
-
-
Arun Easi authored
Reverting this commit so that a fixed up patch, without adding new module parameters, can be submitted. Link: https://lore.kernel.org/stable/166039743723771@kroah.com/ This reverts commit b1f70714. Link: https://lore.kernel.org/r/20220826102559.17474-2-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Mauricio Faria de Oliveira authored
This message is helpful to troubleshoot missing LUNs/SAN boot errors. It'd be nice to log it by default instead of only being enabled with debug. This user had an accidental/forgotten file modprobe.d/qla2xxx.conf w/ option qlini_mode=disabled from experiments with FC target mode, and their boot LUN didn't come up, as it skips SCSI scan, of course. However, their boot log didn't provide any clues to help understand that. The issue/message could be figured out w/ ql2xextended_error_logging, but it would have been simpler (or even deflected/addressed by user) if it had been there by default. And it also would help support/triage/deflection tooling. Expected change: scsi host15: qla2xxx +qla2xxx [0000:3b:00.0]-00fb:15: skipping scsi_scan_host() for non-initiator port qla2xxx [0000:3b:00.0]-00fb:15: QLogic QLE2692 - QLE2692 Dual Port 16Gb FC to PCIe Gen3 x8 Adapter. According to: qla2x00_probe_one() ... ret = scsi_add_host(...); ... ql_log(ql_log_info, ... "skipping scsi_scan_host() for non-initiator port\n"); ... ql_log(ql_log_info, ... "QLogic %s - %s.\n", ha->model_number, ha->model_desc); Link: https://lore.kernel.org/r/20220825120159.275051-1-mfo@canonical.comTested-by:Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by:
-
Sreekanth Reddy authored
Update driver version to 43.100.00.00. Link: https://lore.kernel.org/r/20220825075457.16422-5-sreekanth.reddy@broadcom.comSigned-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
Sreekanth Reddy authored
With cmd_per_lun value 7, a higher number of cache lines (map_nr) are needed while allocating sdev->budget_map which is not reasonable and hence increase the cmd_per_lun value to 128. Link: https://lore.kernel.org/r/20220825075457.16422-4-sreekanth.reddy@broadcom.comSigned-off-by:
-
Sreekanth Reddy authored
The ExtendedType field was set to 1 in the diag buffer register command and hence MPT Endpoint firmware is failing the request with Invalid Field IOCStatus. memset the request frame to zero before framing the diag buffer register command. Link: https://lore.kernel.org/r/20220825075457.16422-3-sreekanth.reddy@broadcom.comSigned-off-by:
-
Sreekanth Reddy authored
When a pool crosses the 4GB boundary region then before reallocating pools change the coherent DMA mask to 32 bits and keep the normal DMA mask set to 63/64 bits. Link: https://lore.kernel.org/r/20220825075457.16422-2-sreekanth.reddy@broadcom.comSigned-off-by:
-
Sreekanth Reddy authored
If SCSI error handling is taking place for timed out I/Os on a drive and the corresponding drive is removed, then stop escalating to higher level of reset by returning the TUR with "I_T NEXUS LOSS OCCURRED" sense key. Link: https://lore.kernel.org/r/20220816080801.13929-1-sreekanth.reddy@broadcom.comSigned-off-by:
-
Gustavo A. R. Silva authored
Prefer struct_size() over open-coded versions of idiom: sizeof(struct-with-flex-array) + sizeof(type-of-flex-array) * count where count is the max number of items the flexible array is supposed to have. Link: https://github.com/KSPP/linux/issues/160 Link: https://lore.kernel.org/r/b215f4760f0e8fbe5fc35be20f2487e89924424d.1660592640.git.gustavoars@kernel.orgReviewed-by:Kees Cook <keescook@chromium.org> Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Prefer struct_size() over open-coded versions of idiom: sizeof(struct-with-flex-array) + sizeof(type-of-flex-array) * count where count is the max number of items the flexible array is supposed to have. Link: https://github.com/KSPP/linux/issues/160 Link: https://lore.kernel.org/r/1211398fb8f7ab332a93f4f8f1a63e8168dbd002.1660592640.git.gustavoars@kernel.orgReviewed-by:
-
Gustavo A. R. Silva authored
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct MR_PD_CFG_SEQ_NUM_SYNC and refactor the rest of the code accordingly. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays [0]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Link: Link: https://reviews.llvm.org/D126864 [0] Link: https://lore.kernel.org/r/78e9261591db072b67fcf49f0216d7046a67ca6d.1660592640.git.gustavoars@kernel.orgReviewed-by:
-
Gustavo A. R. Silva authored
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct MR_DRV_RAID_MAP and refactor the code accordingly. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/r/1448f387821833726b99f0ce13069ada89164eb5.1660592640.git.gustavoars@kernel.orgReviewed-by:
-
Gustavo A. R. Silva authored
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct MR_FW_RAID_MAP_DYNAMIC. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/r/896476f8fe43cf83b491c6c13f59c9ace780d82c.1660592640.git.gustavoars@kernel.orgReviewed-by:
-
Gustavo A. R. Silva authored
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct MR_DRV_RAID_MAP and refactor the the rest of the code accordingly. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/r/4495ce170c8ef088a10f1abe0e7c227368f43242.1660592640.git.gustavoars@kernel.orgReviewed-by:
-
Tetsuo Handa authored
Although qla2xxx driver is calling schedule_{,delayed}_work() from 10 locations, I assume that flush_scheduled_work() from qlt_stop_phase1() needs to flush only works scheduled by qlt_sched_sess_work(), for this loop continues while "struct qla_tgt"->sess_works_list is not empty. Link: https://lore.kernel.org/r/133c6723-90b6-5c8b-72b4-cc01eeb3a8c0@I-love.SAKURA.ne.jpTested-by:Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Tetsuo Handa authored
Currently qlt_stop_phase1() may fail to call flush_scheduled_work(), for list_empty() may return true as soon as qlt_sess_work_fn() called list_del(). In order to close this race window, check list_empty() after calling flush_scheduled_work(). If this patch causes problems, please check commit c4f135d6 ("workqueue: Wrap flush_workqueue() using a macro"). We are on the way to remove all flush_scheduled_work() calls from the kernel. Link: https://lore.kernel.org/r/7f24469d-9e39-3398-d851-329b54c0b923@I-love.SAKURA.ne.jpTested-by:
-
Tetsuo Handa authored
qlt_tmr_work() is no longer used since commit fb35265b ("scsi: qla2xxx: Remove session creation redundant code"). Link: https://lore.kernel.org/r/a0e53c70-b801-adf5-0549-b2b1e421a819@I-love.SAKURA.ne.jpTested-by:
-
Tetsuo Handa authored
"struct qla_tgt"->del_sess_list is no longer used since commit 726b8548 ("qla2xxx: Add framework for async fabric discovery"). Link: https://lore.kernel.org/r/0c335e86-5624-b599-5137-f1377419fb0c@I-love.SAKURA.ne.jpTested-by:
-
James Smart authored
Update copyrights to 2022 for files modified in the 14.2.0.6 patch set. Link: https://lore.kernel.org/r/20220819011736.14141-8-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Update lpfc version to 14.2.0.6. Link: https://lore.kernel.org/r/20220819011736.14141-7-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The SANDiags feature is unused, and related code is removed. Link: https://lore.kernel.org/r/20220819011736.14141-6-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Add capability to specify warning notification period to help firmware adjust to congestion accordingly. Link: https://lore.kernel.org/r/20220819011736.14141-5-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
The kernel test robot reported the following sparse warning: arch/arm64/include/asm/cmpxchg.h:88:1: sparse: sparse: cast truncates bits from constant value (369 becomes 69) On arm64, atomic_xchg only works on 8-bit byte fields. Thus, the macro usage of LPFC_RXMONITOR_TABLE_IN_USE can be unintentionally truncated leading to all logic involving the LPFC_RXMONITOR_TABLE_IN_USE macro to not work properly. Replace the Rx Table atomic_t indexing logic with a new lpfc_rx_info_monitor structure that holds a circular ring buffer. For locking semantics, a spinlock_t is used. Link: https://lore.kernel.org/r/20220819011736.14141-4-jsmart2021@gmail.com Fixes: 17b27ac5 ("scsi: lpfc: Add rx monitoring statistics") Cc: <stable@vger.kernel.org> # v5.15+ Co-developed-by:
-
James Smart authored
An error case exit from lpfc_cmpl_ct_cmd_gft_id() results in a call to lpfc_nlp_put() with a null pointer to a nodelist structure. Changed lpfc_cmpl_ct_cmd_gft_id() to initialize nodelist pointer upon entry. Link: https://lore.kernel.org/r/20220819011736.14141-3-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
During a stress offline/online test in PT2PT topology, target rediscovery can fail with a specific target vendor array. When the HBA transitions to online mode it is possible to receive an unsolicited FLOGI before processing the Link Up event. The received FLOGI will set the defer_flogi_acc_flag, which instructs the driver to wait until it transmits its own FLOGI before ACKing the received FLOGI. In this failure scenario, the link up processing clears the set defer_flogi_acc_flag before we have sent out the FLOGI. As the target has the higher WWPN and is responsible for sending the PLOGI, the target is stuck waiting for its FLOGI_ACC that the driver will never send. Remove the clear of defer_flogi_acc_flag from Link Up event processing. In this stress test case, the defer_flogi_acc_flag is cleared during the Link Down event processing anyways. Link: https://lore.kernel.org/r/20220819011736.14141-2-jsmart2021@gmail.comCo-developed-by:
-
Colin Ian King authored
Variable stp is assigned a value that is never read, the assignment and the variable stp are redundant and can be removed. Cleans up clang scan build warning: drivers/scsi/st.c:4253:7: warning: Although the value stored to 'stp' is used in the enclosing expression, the value is never actually read from 'stp' [deadcode.DeadStores] Link: https://lore.kernel.org/r/20220805115652.2340991-1-colin.i.king@gmail.comSigned-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Colin Ian King authored
The variable mfiStatus is assigned a value but it is never read. The assignment is redundant and can be removed. Also remove { } as the return statement does not need to be in its own code block. Cleans up clang scan build warning: drivers/scsi/megaraid/megaraid_sas_base.c:4026:7: warning: Although the value stored to 'mfiStatus' is used in the enclosing expression, the value is never actually read from 'mfiStatus' [deadcode.DeadStores] Link: https://lore.kernel.org/r/20220805115042.2340400-1-colin.i.king@gmail.comSigned-off-by: -
Colin Ian King authored
The variable scb is assigned a value but it is never read. The assignment is redundant and can be removed. Also replace the != NULL check with the more usual non-null check idiom. Cleans up clang scan build warning: drivers/scsi/initio.c:1169:9: warning: Although the value stored to 'scb' is used in the enclosing expression, the value is never actually read from 'scb' [deadcode.DeadStores] Link: https://lore.kernel.org/r/20220805114100.2339637-1-colin.i.king@gmail.comSigned-off-by:
-
Colin Ian King authored
Variable iocnum is assigned a value that is never read, the assignment and hence the variable are redundant can be removed. Also update the comment to reflect the correct name of the variable being updated. Cleans up clang-scan warning: drivers/message/fusion/mptctl.c:641:8: warning: Although the value stored to 'iocnum' is used in the enclosing expression, the value is never actually read from 'iocnum' [deadcode.DeadStores] Link: https://lore.kernel.org/r/20220805113214.2339022-1-colin.i.king@gmail.comSigned-off-by:
-
Bradley Grove authored
Disable firmware download for ATTO devices where it is not supported. Link: https://lore.kernel.org/r/20220805174609.14830-2-bgrove@attotech.comCo-developed-by:
Rob Crispo <rcrispo@attotech.com> Signed-off-by:
Bradley Grove <bgrove@attotech.com> Signed-off-by:
-
Bradley Grove authored
Add ATTO's PCI IDs and modify the driver to handle the unique NVRAM structure used by ATTO's devices. Link: https://lore.kernel.org/r/20220805174609.14830-1-bgrove@attotech.comCo-developed-by:
-
Sreekanth Reddy authored
Block the I/Os on the target devices until corresponding target device's target dev objects are refreshed as part of post controller reset operation. Link: https://lore.kernel.org/r/20220804131226.16653-16-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Update the host's SAS ports if there is change in port id or phys. If the port id is changed, then the driver updates it. If some phys are enabled/disabled during reset, then driver updates them in STL. Check for the responding expander devices and update the device handle if it got changed. Register the expander with STL if it got added during reset and unregister the expander device if it got removed during reset. [mkp: include fix for zeroday warning] Link: https://lore.kernel.org/r/20220804131226.16653-15-sreekanth.reddy@broadcom.comReviewed-by:
-
- 23 Aug, 2022 8 commits
-
-
Sreekanth Reddy authored
Add support for the following SAS transport class callbacks: - get_linkerrors - get_enclosure_identifier - get_bay_identifier - phy_reset - phy_enable - set_phy_speed - smp_handler Link: https://lore.kernel.org/r/20220804131226.16653-14-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Add framework to issue MPT transport commands to controllers. Also issue the MPT transport commands to get the manufacturing info of SAS expander device. Link: https://lore.kernel.org/r/20220804131226.16653-13-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Register/unregister the SAS, SATA devices to SCSI Transport Layer(STL) whenever the corresponding device is added/removed from topology. Link: https://lore.kernel.org/r/20220804131226.16653-12-sreekanth.reddy@broadcom.comReported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
-
Sreekanth Reddy authored
When device is registered with the STL then get the corresponding device's target object using the rphy in below callback functions: - mpi3mr_target_alloc() - mpi3mr_slave_alloc() - mpi3mr_slave_configure() - mpi3mr_slave_destroy() Link: https://lore.kernel.org/r/20220804131226.16653-11-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Register/unregister the expander devices to SCSI Transport Layer(STL) whenever the corresponding expander is added/removed from topology. Link: https://lore.kernel.org/r/20220804131226.16653-10-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Register the SAS, SATA devices to SCSI Transport Layer (STL) only if multipath capability is disabled in the controller's firmware. Link: https://lore.kernel.org/r/20220804131226.16653-9-sreekanth.reddy@broadcom.comReviewed-by:
-
Sreekanth Reddy authored
Add the following helper functions: - Update the host phys with STL - Remove the device's SAS port with STL Link: https://lore.kernel.org/r/20220804131226.16653-8-sreekanth.reddy@broadcom.comReviewed-by:
Himanshu Madhani <himanshu.madani@oracle.com> Signed-off-by:
-
Sreekanth Reddy authored
Add the following helper functions: - Get the device's sas address by reading corresponding device's Device page0 - Get the expander object from expander list based on expander's handle - Get the target device object from target device list based on device's sas address - Get the expander device object from expander list based on expanders's sas address - Get hba port object from hba port table list based on port's port id Link: https://lore.kernel.org/r/20220804131226.16653-7-sreekanth.reddy@broadcom.comReviewed-by:
-
