Use the proper format for FE_SET_TONE documentation and
improve the documentation.

Keep the enum fe_sec_tone_mode description together with
the ioctl, as both are used together.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the proper format for FE_SET_VOLTAGE documentation and fix
the documentation. The description for the enum is not 100%,
and it is missing the voltage off value.

Also, it is better to keep the enum description together with
the ioctl, as both are used together.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the proper format for FE_ENABLE_HIGH_LNB_VOLTAGE documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the proper format for FE_SET_FRONTEND_TUNE_MODE documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

That helps the xref logic at the Makefile to point to the
right place. Also, it becomes more organized and easier to
maintain if each ioctl have its own xml file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

for the xml files describing ioctls, use the same nomenclature
as on V4L2: the ioctl name, in lower case, using - instead of _.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The new code that detects undocumented ioctls hits some false
positives:

This one is not documented, nor it should, as this is
there just to reserve namespace:

	Warning: can't find reference for VIDIOC_RESERVED ioctl

But those are already documented together with other ioctls:

	Warning: can't find reference for VIDIOC_UNSUBSCRIBE_EVENT ioctl
	Warning: can't find reference for FE_GET_PROPERTY ioctl
	Warning: can't find reference for VIDIOC_SUBDEV_G_EDID ioctl
	Warning: can't find reference for VIDIOC_SUBDEV_S_EDID ioctl
	Warning: can't find reference for VIDIOC_SUBDEV_S_DV_TIMINGS ioctl
	Warning: can't find reference for VIDIOC_SUBDEV_G_DV_TIMINGS ioctl
	Warning: can't find reference for VIDIOC_SUBDEV_QUERY_DV_TIMINGS ioctl

So, we need to just be sure to point to the right documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Those ioctls are already parsed. No need to explicitly add
them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

There are several badly documented undocumented ioctls.
Currently, it just generates an empty link. Instead of doing that,
only add references to the ones that exists, and add a warning
for all references that weren't found.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Create xref links for all DTV properties and link the frontend.h
to each. Also use them at the DVB frontent API example.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Make the text clearer about what the properties API does.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of having two refentries, merge them into just one,
like what's done with other similar ioctls at V4L2 side.

That makes the entry cleaner and will allow to add the associated
structures together with the refentry.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of going to the V4L2 open(), use the xref to the
proper place at the frontend ioctls that were already
reformatted.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the standard way of documenting ioctls for FE_GET_PROPERTY
and FE_SET_PROPERTY.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The DVBv5 API uses DVB properties as the main way to set the frontend
and collect statistics. Move the definition to happen earlier, in
order to reflect its importance.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Move the ioctl and enum fe_status to a separate xml file and
put it into a better format.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Keeping everything altogether makes harder to reorganize the
DocBook. So, move the FE_GET_INFO ioctl and the associated structures
into a separate file.

No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The DVB part of the docbook has a completely different format
than the V4L2 part, as it was written as a separate document.

As the V4L2 documentation is on better shape, and its format
allows adding more information, let's use it for FE_GET_INFO
and gradually update the non-legacy DVB ioctls using the new
format.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Using typedefs is already bad enough, but doing it together
with enum declaration is even worse.

Also, it breaks the scripts at DocBook that would be generating
reference pointers for the enums.

Well, we can't get rid of typedef right now, but let's at least
declare it on a separate line, and let the scripts to generate
the cross-reference, as this is needed for the next DocBook
patches.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Although the recommended usage is the DVBv5 API calls, the
documentation doesn't make it clear about what's the recommended
calls and what's legacy.

So, move the legacy API bits to a separate xml, putting them into
a new section.

Please notice that more changes are needed, since some of the
bits there are cross-referenced elsewhere.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The DVB frontend API got bitrotten. Update it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Currently, it is using 'role="tt"', but this is not defined at
the DocBook 4.5 spec. The net result is that no emphasis happens.

So, replace them to bold emphasis.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

An illustration of what's considered a typical media device
may help people to better understand the contents of the media
infrastructure API docbook. So, add it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The Docbook mistakenly makes to believe that all needed APIs for
media devices are there. Add a note there pointing that some
sub-devices are actually be controlled via ALSA API.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The list of standards at the media docbook is incomplete, and it
is mentioning that the DVB-S2 & friends is "currently being updated".
That's wrong, as such update occurred back in 2008.

So, provide a more complete list of supported standards and add
a reference to the actual list.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The ucblocks register is probably a counter and not a rate; assume
it is so and change the calculations as required.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Frontend bandwidth calculation overflows on very high DVB-S/S2
symbol rates. Use mult_frac() macro in order to keep calculation
correct.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

As reported by smatch:

drivers/media/tuners/e4000.c:287:32: warning: constant 2208000000 is so big it is long long
drivers/media/tuners/e4000.c:287:32: warning: decimal constant 2208000000 is between LONG_MAX and ULONG_MAX. For C99 that means long long, C90 compilers are very likely to produce unsigned long (and a warning) here
drivers/media/tuners/e4000.c:287:3: warning: this decimal constant is unsigned only in ISO C90
   .rangehigh  =  2208000000,
   ^

Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Implement V4L2 subdevice tuner and core ops. After that this driver
is hybrid driver implementing both V4L2 and DVB ops.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

* Rename device state from 's' to 'dev'.
* Move single include to driver private header.
* Change error handling type of each function to one I tend use
nowadays.
* Remove dummy register write from init. Even Windows driver does this
multiple times remove it as I have never seen any I2C errors.
* Define I2C client pointer for each function and use it.
* Do not clean tuner ops during driver remove - not needed.
* Disable sysfs device bind / unbind. We are not allowed manually
bind / unbind device from the driver currently.
* Rename some other variables.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Update synthesizer calculation to model I prefer nowadays. It is
mostly just renaming some variables to ones I think are most standard.
Also add 'schematic' of synthesizer following my current understanding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

This code works fine but static checkers complain.  The test_bit()
function takes the bit number and not a mask.  Then the other issue is
that we were using USB_STATE_URB_BUF which is BIT(0) instead of URB_BUF.
Also we were open coding that instead of using the test/clear/set_bit()
functions.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The cobalt device is a PCIe card with 4 HDMI inputs (adv7604) and a
connector that can be used to hook up an adv7511 transmitter or an
adv7842 receiver daughterboard.

This device is used within Cisco but is sadly not available outside
of Cisco. Nevertheless it is a very interesting driver that can serve
as an example of how to support HDMI hardware and how to use the popular
adv devices.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

This makes it easier for the bridge driver to just passthrough such
events to the corresponding device node.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

All drivers use custom notifications, in particular when source changes.
The bridge only has to map the subdev that sends it to whatever video node it is connected to.
Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

vb2_buffer_done() already allows STATE_QUEUED, but currently only when not
streaming. It is useful to allow it while streaming as well, as this makes
it possible for drivers to requeue buffers while waiting for a stable
video signal.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Replace the dummy video format operations by pad format operations that
configure the output format.

Copied from the adv7604 driver.

Note: while arch/blackfin/mach-bf609/boards/ezkit.c uses adv7842_platform_data
this source has not been updated because it is broken since the very
beginning. It depends on a struct adv7842_output_format that does not
exist.

And besides that gcc has no support for bf609 so nobody can compile it
except by installing a toolchain from ADI.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Remove multiple blank likes.
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

These state vars are used for more than just ber calculation, also
fix typo.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

BER & UCB aren't available unless we're locked; don't update dvbv5
stats when not locked and mark these counters as unavailable.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>