- 07 Oct, 2012 40 commits
-
-
Sarah Sharp authored
commit 33b2831a upstream. When the xHCI driver needs to clean up memory (perhaps due to a failed register restore on resume from S3 or resume from S4), it needs to reset the number of reserved TRBs on the command ring to zero. Otherwise, several resume cycles (about 30) with a UAS device attached will continually increment the number of reserved TRBs, until all command submissions fail because there isn't enough room on the command ring. This patch should be backported to kernels as old as 2.6.32, that contain the commit 913a8a34 "USB: xhci: Change how xHCI commands are handled." Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Willy Tarreau <w@1wt.eu>
-
Jan Kara authored
commit acd6ad83 upstream. When insert_inode_locked() fails in ext4_new_inode() it most likely means inode bitmap got corrupted and we allocated again inode which is already in use. Also doing unlock_new_inode() during error recovery is wrong since the inode does not have I_NEW set. Fix the problem by jumping to fail: (instead of fail_drop:) which declares filesystem error and does not call unlock_new_inode(). Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
commit 1415dd87 upstream. When insert_inode_locked() fails in ext3_new_inode() it most likely means inode bitmap got corrupted and we allocated again inode which is already in use. Also doing unlock_new_inode() during error recovery is wrong since inode does not have I_NEW set. Fix the problem by jumping to fail: (instead of fail_drop:) which declares filesystem error and does not call unlock_new_inode(). Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Jonathan Nieder authored
This is a shorter (and more appropriate for stable kernels) analog to the following upstream commit: commit 6926afd1 Author: Trond Myklebust <Trond.Myklebust@netapp.com> Date: Sat Jan 7 13:22:46 2012 -0500 NFSv4: Save the owner/group name string when doing open ...so that we can do the uid/gid mapping outside the asynchronous RPC context. This fixes a bug in the current NFSv4 atomic open code where the client isn't able to determine what the true uid/gid fields of the file are, (because the asynchronous nature of the OPEN call denies it the ability to do an upcall) and so fills them with default values, marking the inode as needing revalidation. Unfortunately, in some cases, the VFS will do some additional sanity checks on the file, and may override the server's decision to allow the open because it sees the wrong owner/group fields. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Without this patch, logging into two different machines with home directories mounted over NFS4 and then running "vim" and typing ":q" in each reliably produces the following error on the second machine: E137: Viminfo file is not writable: /users/system/rtheys/.viminfo This regression was introduced by 80e52ace ("NFSv4: Don't do idmapper upcalls for asynchronous RPC calls", merged during the 2.6.32 cycle) --- after the OPEN call, .viminfo has the default values for st_uid and st_gid (0xfffffffe) cached because we do not want to let rpciod wait for an idmapper upcall to fill them in. The fix used in mainline is to save the owner and group as strings and perform the upcall in _nfs4_proc_open outside the rpciod context, which takes about 600 lines. For stable, we can do something similar with a one-liner: make open check for the stale fields and make a (synchronous) GETATTR call to fill them when needed. Trond dictated the patch, I typed it in, and Rik tested it. Addresses http://bugs.debian.org/659111 and https://bugzilla.redhat.com/789298Reported-by:
Rik Theys <Rik.Theys@esat.kuleuven.be> Explained-by:
David Flyn <davidf@rd.bbc.co.uk> Signed-off-by:
Jonathan Nieder <jrnieder@gmail.com> Tested-by:
-
Mark Hills authored
commit c914f55f upstream. This assertion seems to imply that chip->dsp_code_to_load is a pointer. It's actually an integer handle on the actual firmware, and 0 has no special meaning. The assertion prevents initialisation of a Darla20 card, but would also affect other models. It seems it was introduced in commit dd7b254d. ALSA sound/pci/echoaudio/echoaudio.c:2061 Echoaudio driver starting... ALSA sound/pci/echoaudio/echoaudio.c:1969 chip=ebe4e000 ALSA sound/pci/echoaudio/echoaudio.c:2007 pci=ed568000 irq=19 subdev=0010 Init hardware... ALSA sound/pci/echoaudio/darla20_dsp.c:36 init_hw() - Darla20 ------------[ cut here ]------------ WARNING: at sound/pci/echoaudio/echoaudio_dsp.c:478 init_hw+0x1d1/0x86c [snd_darla20]() Hardware name: Dell DM051 BUG? (!chip->dsp_code_to_load || !chip->comm_page) Signed-off-by:
Mark Hills <mark@pogo.org.uk> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 116a0fc3 ] skb_checksum_help(skb) can return an error, we must free skb in this case. qdisc_drop(skb, sch) can also be feeded with a NULL skb (if skb_unshare() failed), so lets use this generic helper. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Tim Bird authored
commit e787ec13 upstream. The inline assembly in kernel_execve() uses r8 and r9. Since this code sequence does not return, it usually doesn't matter if the register clobber list is accurate. However, I saw a case where a particular version of gcc used r8 as an intermediate for the value eventually passed to r9. Because r8 is used in the inline assembly, and not mentioned in the clobber list, r9 was set to an incorrect value. This resulted in a kernel panic on execution of the first user-space program in the system. r9 is used in ret_to_user as the thread_info pointer, and if it's wrong, bad things happen. Signed-off-by:
Tim Bird <tim.bird@am.sony.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
David Ward authored
[ Upstream commit 244b65db ] A parameter set exists for WRED mode, called wred_set, to hold the same values for qavg and qidlestart across all VQs. The WRED mode values had been previously held in the VQ for the default DP. After these values were moved to wred_set, the VQ for the default DP was no longer created automatically (so that it could be omitted on purpose, to have packets in the default DP enqueued directly to the device without using RED). However, gred_dump() was overlooked during that change; in WRED mode it still reads qavg/qidlestart from the VQ for the default DP, which might not even exist. As a result, this command sequence will cause an oops: tc qdisc add dev $DEV handle $HANDLE parent $PARENT gred setup \ DPs 3 default 2 grio tc qdisc change dev $DEV handle $HANDLE gred DP 0 prio 8 $RED_OPTIONS tc qdisc change dev $DEV handle $HANDLE gred DP 1 prio 8 $RED_OPTIONS This fixes gred_dump() in WRED mode to use the values held in wred_set. Signed-off-by:
David Ward <david.ward@ll.mit.edu> Signed-off-by:
-
Davide Ciminaghi authored
[ Upstream commit 8a9a0ea6 ] At the beginning of ks_rcv(), a for loop retrieves the header information relevant to all the frames stored in the mac's internal buffers. The number of pending frames is stored as an 8 bits field in KS_RXFCTR. If interrupts are disabled long enough to allow for more than 32 frames to accumulate in the MAC's internal buffers, a buffer overflow occurs. This patch fixes the problem by making the driver's frame_head_info buffer big enough. Well actually, since the chip appears to have 12K of internal rx buffers and the shortest ethernet frame should be 64 bytes long, maybe the limit could be set to 12*1024/64 = 192 frames, but 255 should be safer. Signed-off-by:
Davide Ciminaghi <ciminaghi@gnudd.com> Signed-off-by:
Raffaele Recalcati <raffaele.recalcati@bticino.it> Signed-off-by:
-
Tony Zelenoff authored
[ Upstream commit 03662e41 ] Problem: There was two separate work_struct structures which share one handler. Unfortunately getting atl1_adapter structure from work_struct in case of DMA error was done from incorrect offset which cause kernel panics. Solution: The useless work_struct for DMA error removed and handler name changed to more generic one. Signed-off-by:
Tony Zelenoff <antonz@parallels.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 110c4330 ] As soon as an skb is queued into socket error queue, another thread can consume it, so we are not allowed to reference skb anymore, or risk use after free. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 4a7e7c2a ] As soon as an skb is queued into socket receive_queue, another thread can consume it, so we are not allowed to reference skb anymore, or risk use after free. Signed-off-by:
-
Sasha Levin authored
[ Upstream commit bcf1b70a ] A phonet packet is limited to USHRT_MAX bytes, this is never checked during tx which means that the user can specify any size he wishes, and the kernel will attempt to allocate that size. In the good case, it'll lead to the following warning, but it may also cause the kernel to kick in the OOM and kill a random task on the server. [ 8921.744094] WARNING: at mm/page_alloc.c:2255 __alloc_pages_slowpath+0x65/0x730() [ 8921.749770] Pid: 5081, comm: trinity Tainted: G W 3.4.0-rc1-next-20120402-sasha #46 [ 8921.756672] Call Trace: [ 8921.758185] [<ffffffff810b2ba7>] warn_slowpath_common+0x87/0xb0 [ 8921.762868] [<ffffffff810b2be5>] warn_slowpath_null+0x15/0x20 [ 8921.765399] [<ffffffff8117eae5>] __alloc_pages_slowpath+0x65/0x730 [ 8921.769226] [<ffffffff81179c8a>] ? zone_watermark_ok+0x1a/0x20 [ 8921.771686] [<ffffffff8117d045>] ? get_page_from_freelist+0x625/0x660 [ 8921.773919] [<ffffffff8117f3a8>] __alloc_pages_nodemask+0x1f8/0x240 [ 8921.776248] [<ffffffff811c03e0>] kmalloc_large_node+0x70/0xc0 [ 8921.778294] [<ffffffff811c4bd4>] __kmalloc_node_track_caller+0x34/0x1c0 [ 8921.780847] [<ffffffff821b0e3c>] ? sock_alloc_send_pskb+0xbc/0x260 [ 8921.783179] [<ffffffff821b3c65>] __alloc_skb+0x75/0x170 [ 8921.784971] [<ffffffff821b0e3c>] sock_alloc_send_pskb+0xbc/0x260 [ 8921.787111] [<ffffffff821b002e>] ? release_sock+0x7e/0x90 [ 8921.788973] [<ffffffff821b0ff0>] sock_alloc_send_skb+0x10/0x20 [ 8921.791052] [<ffffffff824cfc20>] pep_sendmsg+0x60/0x380 [ 8921.792931] [<ffffffff824cb4a6>] ? pn_socket_bind+0x156/0x180 [ 8921.794917] [<ffffffff824cb50f>] ? pn_socket_autobind+0x3f/0x90 [ 8921.797053] [<ffffffff824cb63f>] pn_socket_sendmsg+0x4f/0x70 [ 8921.798992] [<ffffffff821ab8e7>] sock_aio_write+0x187/0x1b0 [ 8921.801395] [<ffffffff810e325e>] ? sub_preempt_count+0xae/0xf0 [ 8921.803501] [<ffffffff8111842c>] ? __lock_acquire+0x42c/0x4b0 [ 8921.805505] [<ffffffff821ab760>] ? __sock_recv_ts_and_drops+0x140/0x140 [ 8921.807860] [<ffffffff811e07cc>] do_sync_readv_writev+0xbc/0x110 [ 8921.809986] [<ffffffff811958e7>] ? might_fault+0x97/0xa0 [ 8921.811998] [<ffffffff817bd99e>] ? security_file_permission+0x1e/0x90 [ 8921.814595] [<ffffffff811e17e2>] do_readv_writev+0xe2/0x1e0 [ 8921.816702] [<ffffffff810b8dac>] ? do_setitimer+0x1ac/0x200 [ 8921.818819] [<ffffffff810e2ec1>] ? get_parent_ip+0x11/0x50 [ 8921.820863] [<ffffffff810e325e>] ? sub_preempt_count+0xae/0xf0 [ 8921.823318] [<ffffffff811e1926>] vfs_writev+0x46/0x60 [ 8921.825219] [<ffffffff811e1a3f>] sys_writev+0x4f/0xb0 [ 8921.827127] [<ffffffff82658039>] system_call_fastpath+0x16/0x1b [ 8921.829384] ---[ end trace dffe390f30db9eb7 ]--- Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Acked-by:
Rmi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by:
-
Thomas Jarosch authored
commit f67fd55f upstream. Some BIOS implementations leave the Intel GPU interrupts enabled, even though no one is handling them (f.e. i915 driver is never loaded). Additionally the interrupt destination is not set up properly and the interrupt ends up -somewhere-. These spurious interrupts are "sticky" and the kernel disables the (shared) interrupt line after 100.000+ generated interrupts. Fix it by disabling the still enabled interrupts. This resolves crashes often seen on monitor unplug. Tested on the following boards: - Intel DH61CR: Affected - Intel DH67BL: Affected - Intel S1200KP server board: Affected - Asus P8H61-M LE: Affected, but system does not crash. Probably the IRQ ends up somewhere unnoticed. According to reports on the net, the Intel DH61WW board is also affected. Many thanks to Jesse Barnes from Intel for helping with the register configuration and to Intel in general for providing public hardware documentation. Signed-off-by:
Thomas Jarosch <thomas.jarosch@intra2net.com> Tested-by:
Charlie Suffin <charlie.suffin@stratus.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Kent Yoder authored
commit 25c3d30c upstream. The current code only increments the upper 64 bits of the SHA-512 byte counter when the number of bytes hashed happens to hit 2^64 exactly. This patch increments the upper 64 bits whenever the lower 64 bits overflows. Signed-off-by:
Kent Yoder <key@linux.vnet.ibm.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Alex He authored
commit 95018a53 upstream. Re-define XHCI_LEGACY_DISABLE_SMI and used it in right way. All SMI enable bits will be cleared to zero and flag bits 29:31 are also cleared to zero. Other bits should be presvered as Table 146. This patch should be backported to kernels as old as 2.6.31. Signed-off-by:
Alex He <alex.he@amd.com> Signed-off-by:
-
Sarah Sharp authored
commit 159e1fcc upstream. When xhci_mem_cleanup() is called, we can't be sure if the xHC is actually halted. We can ask the xHC to halt by writing to the RUN bit in the command register, but that might timeout due to a HW hang. If the host controller is still running, we should not write zeroed values to the event ring dequeue pointers or base tables, the DCBAA pointers, or the command ring pointers. Eric Fu reports his VIA VL800 host accesses the event ring pointers after a failed register restore on resume from suspend. The hypothesis is that the host never actually halted before the register write to change the event ring pointer to zero. Remove all writes of zeroed values to pointer registers in xhci_mem_cleanup(). Instead, make all callers of the function reset the host controller first, which will reset those registers to zero. xhci_mem_init() is the only caller that doesn't first halt and reset the host controller before calling xhci_mem_cleanup(). This should be backported to kernels as old as 2.6.32. Signed-off-by:
Elric Fu <elricfu1@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit a65a6f14 upstream. Fix race between probe and open by making sure that the disconnected flag is not cleared until all ports have been registered. A call to tty_open while probe is running may get a reference to the serial structure in serial_install before its ports have been registered. This may lead to usb_serial_core calling driver open before port is fully initialised. With ftdi_sio this result in the following NULL-pointer dereference as the private data has not been initialised at open: [ 199.698286] IP: [<f811a089>] ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698297] *pde = 00000000 [ 199.698303] Oops: 0000 [#1] PREEMPT SMP [ 199.698313] Modules linked in: ftdi_sio usbserial [ 199.698323] [ 199.698327] Pid: 1146, comm: ftdi_open Not tainted 3.2.11 #70 Dell Inc. Vostro 1520/0T816J [ 199.698339] EIP: 0060:[<f811a089>] EFLAGS: 00010286 CPU: 0 [ 199.698344] EIP is at ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698348] EAX: 0000003e EBX: f5067000 ECX: 00000000 EDX: 80000600 [ 199.698352] ESI: f48d8800 EDI: 00000001 EBP: f515dd54 ESP: f515dcfc [ 199.698356] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 199.698361] Process ftdi_open (pid: 1146, ti=f515c000 task=f481e040 task.ti=f515c000) [ 199.698364] Stack: [ 199.698368] f811a9fe f811a9e0 f811b3ef 00000000 00000000 00001388 00000000 f4a86800 [ 199.698387] 00000002 00000000 f806e68e 00000000 f532765c f481e040 00000246 22222222 [ 199.698479] 22222222 22222222 22222222 f5067004 f5327600 f5327638 f515dd74 f806e6ab [ 199.698496] Call Trace: [ 199.698504] [<f806e68e>] ? serial_activate+0x2e/0x70 [usbserial] [ 199.698511] [<f806e6ab>] serial_activate+0x4b/0x70 [usbserial] [ 199.698521] [<c126380c>] tty_port_open+0x7c/0xd0 [ 199.698527] [<f806e660>] ? serial_set_termios+0xa0/0xa0 [usbserial] [ 199.698534] [<f806e76f>] serial_open+0x2f/0x70 [usbserial] [ 199.698540] [<c125d07c>] tty_open+0x20c/0x510 [ 199.698546] [<c10e9eb7>] chrdev_open+0xe7/0x230 [ 199.698553] [<c10e48f2>] __dentry_open+0x1f2/0x390 [ 199.698559] [<c144bfec>] ? _raw_spin_unlock+0x2c/0x50 [ 199.698565] [<c10e4b76>] nameidata_to_filp+0x66/0x80 [ 199.698570] [<c10e9dd0>] ? cdev_put+0x20/0x20 [ 199.698576] [<c10f3e08>] do_last+0x198/0x730 [ 199.698581] [<c10f4440>] path_openat+0xa0/0x350 [ 199.698587] [<c10f47d5>] do_filp_open+0x35/0x80 [ 199.698593] [<c144bfec>] ? _raw_spin_unlock+0x2c/0x50 [ 199.698599] [<c10ff110>] ? alloc_fd+0xc0/0x100 [ 199.698605] [<c10f0b72>] ? getname_flags+0x72/0x120 [ 199.698611] [<c10e4450>] do_sys_open+0xf0/0x1c0 [ 199.698617] [<c11fcc08>] ? trace_hardirqs_on_thunk+0xc/0x10 [ 199.698623] [<c10e458e>] sys_open+0x2e/0x40 [ 199.698628] [<c144c990>] sysenter_do_call+0x12/0x36 [ 199.698632] Code: 85 89 00 00 00 8b 16 8b 4d c0 c1 e2 08 c7 44 24 14 88 13 00 00 81 ca 00 00 00 80 c7 44 24 10 00 00 00 00 c7 44 24 0c 00 00 00 00 <0f> b7 41 78 31 c9 89 44 24 08 c7 44 24 04 00 00 00 00 c7 04 24 [ 199.698884] EIP: [<f811a089>] ftdi_open+0x59/0xe0 [ftdi_sio] SS:ESP 0068:f515dcfc [ 199.698893] CR2: 0000000000000078 [ 199.698925] ---[ end trace 77c43ec023940cff ]--- Reported-and-tested-by:
Ken Huang <csuhgw@gmail.com> Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Wang YanQing authored
commit b78f29ca upstream. This patch fix the oops below that catched in my machine [ 81.560602] uvesafb: NVIDIA Corporation, GT216 Board - 0696a290, Chip Rev , OEM: NVIDIA, VBE v3.0 [ 81.609384] uvesafb: protected mode interface info at c000:d350 [ 81.609388] uvesafb: pmi: set display start = c00cd3b3, set palette = c00cd40e [ 81.609390] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 81.614558] uvesafb: VBIOS/hardware doesn't support DDC transfers [ 81.614562] uvesafb: no monitor limits have been set, default refresh rate will be used [ 81.614994] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=4915 [ 81.744147] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 81.744153] BUG: unable to handle kernel paging request at c00cd3b3 [ 81.744159] IP: [<c00cd3b3>] 0xc00cd3b2 [ 81.744167] *pdpt = 00000000016d6001 *pde = 0000000001c7b067 *pte = 80000000000cd163 [ 81.744171] Oops: 0011 [#1] SMP [ 81.744174] Modules linked in: uvesafb(+) cfbcopyarea cfbimgblt cfbfillrect [ 81.744178] [ 81.744181] Pid: 3497, comm: modprobe Not tainted 3.3.0-rc4NX+ #71 Acer Aspire 4741 /Aspire 4741 [ 81.744185] EIP: 0060:[<c00cd3b3>] EFLAGS: 00010246 CPU: 0 [ 81.744187] EIP is at 0xc00cd3b3 [ 81.744189] EAX: 00004f07 EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 81.744191] ESI: f763f000 EDI: f763f6e8 EBP: f57f3a0c ESP: f57f3a00 [ 81.744192] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 81.744195] Process modprobe (pid: 3497, ti=f57f2000 task=f748c600 task.ti=f57f2000) [ 81.744196] Stack: [ 81.744197] f82512c5 f759341c 00000000 f57f3a30 c124a9bc 00000001 00000001 000001e0 [ 81.744202] f8251280 f763f000 f7593400 00000000 f57f3a40 c12598dd f5c0c000 00000000 [ 81.744206] f57f3b10 c1255efe c125a21a 00000006 f763f09c 00000000 c1c6cb60 f7593400 [ 81.744210] Call Trace: [ 81.744215] [<f82512c5>] ? uvesafb_pan_display+0x45/0x60 [uvesafb] [ 81.744222] [<c124a9bc>] fb_pan_display+0x10c/0x160 [ 81.744226] [<f8251280>] ? uvesafb_vbe_find_mode+0x180/0x180 [uvesafb] [ 81.744230] [<c12598dd>] bit_update_start+0x1d/0x50 [ 81.744232] [<c1255efe>] fbcon_switch+0x39e/0x550 [ 81.744235] [<c125a21a>] ? bit_cursor+0x4ea/0x560 [ 81.744240] [<c129b6cb>] redraw_screen+0x12b/0x220 [ 81.744245] [<c128843b>] ? tty_do_resize+0x3b/0xc0 [ 81.744247] [<c129ef42>] vc_do_resize+0x3d2/0x3e0 [ 81.744250] [<c129efb4>] vc_resize+0x14/0x20 [ 81.744253] [<c12586bd>] fbcon_init+0x29d/0x500 [ 81.744255] [<c12984c4>] ? set_inverse_trans_unicode+0xe4/0x110 [ 81.744258] [<c129b378>] visual_init+0xb8/0x150 [ 81.744261] [<c129c16c>] bind_con_driver+0x16c/0x360 [ 81.744264] [<c129b47e>] ? register_con_driver+0x6e/0x190 [ 81.744267] [<c129c3a1>] take_over_console+0x41/0x50 [ 81.744269] [<c1257b7a>] fbcon_takeover+0x6a/0xd0 [ 81.744272] [<c12594b8>] fbcon_event_notify+0x758/0x790 [ 81.744277] [<c10929e2>] notifier_call_chain+0x42/0xb0 [ 81.744280] [<c1092d30>] __blocking_notifier_call_chain+0x60/0x90 [ 81.744283] [<c1092d7a>] blocking_notifier_call_chain+0x1a/0x20 [ 81.744285] [<c124a5a1>] fb_notifier_call_chain+0x11/0x20 [ 81.744288] [<c124b759>] register_framebuffer+0x1d9/0x2b0 [ 81.744293] [<c1061c73>] ? ioremap_wc+0x33/0x40 [ 81.744298] [<f82537c6>] uvesafb_probe+0xaba/0xc40 [uvesafb] [ 81.744302] [<c12bb81f>] platform_drv_probe+0xf/0x20 [ 81.744306] [<c12ba558>] driver_probe_device+0x68/0x170 [ 81.744309] [<c12ba731>] __device_attach+0x41/0x50 [ 81.744313] [<c12b9088>] bus_for_each_drv+0x48/0x70 [ 81.744316] [<c12ba7f3>] device_attach+0x83/0xa0 [ 81.744319] [<c12ba6f0>] ? __driver_attach+0x90/0x90 [ 81.744321] [<c12b991f>] bus_probe_device+0x6f/0x90 [ 81.744324] [<c12b8a45>] device_add+0x5e5/0x680 [ 81.744329] [<c122a1a3>] ? kvasprintf+0x43/0x60 [ 81.744332] [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70 [ 81.744335] [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70 [ 81.744339] [<c12bbe9f>] platform_device_add+0xff/0x1b0 [ 81.744343] [<f8252906>] uvesafb_init+0x50/0x9b [uvesafb] [ 81.744346] [<c100111f>] do_one_initcall+0x2f/0x170 [ 81.744350] [<f82528b6>] ? uvesafb_is_valid_mode+0x66/0x66 [uvesafb] [ 81.744355] [<c10c6994>] sys_init_module+0xf4/0x1410 [ 81.744359] [<c1157fc0>] ? vfsmount_lock_local_unlock_cpu+0x30/0x30 [ 81.744363] [<c144cb10>] sysenter_do_call+0x12/0x36 [ 81.744365] Code: f5 00 00 00 32 f6 66 8b da 66 d1 e3 66 ba d4 03 8a e3 b0 1c 66 ef b0 1e 66 ef 8a e7 b0 1d 66 ef b0 1f 66 ef e8 fa 00 00 00 61 c3 <60> e8 c8 00 00 00 66 8b f3 66 8b da 66 ba d4 03 b0 0c 8a e5 66 [ 81.744388] EIP: [<c00cd3b3>] 0xc00cd3b3 SS:ESP 0068:f57f3a00 [ 81.744391] CR2: 00000000c00cd3b3 [ 81.744393] ---[ end trace 18b2c87c925b54d6 ]--- Signed-off-by:
Wang YanQing <udknight@gmail.com> Cc: Michal Januszewski <spock@gentoo.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
David S. Miller authored
commit 9e0daff3 upstream. The DS driver registers as a subsys_initcall() but this can be too early, in particular this risks registering before we've had a chance to allocate and setup module_kset in kernel/params.c which is performed also as a subsyts_initcall(). Register DS using device_initcall() insteal. Signed-off-by:
-
Johan Hovold authored
commit 33b69bf8 upstream. Do not close protocol driver until device has been unregistered. This fixes a race between tty_close and hci_dev_open which can result in a NULL-pointer dereference. The line discipline closes the protocol driver while we may still have hci_dev_open sleeping on the req_lock mutex resulting in a NULL-pointer dereference when lock is acquired and hci_init_req called. Bug is 100% reproducible using hciattach and a disconnected serial port: 0. # hciattach -n ttyO1 any noflow 1. hci_dev_open called from hci_power_on grabs req lock 2. hci_init_req executes but device fails to initialise (times out eventually) 3. hci_dev_open is called from hci_sock_ioctl and sleeps on req lock 4. hci_uart_tty_close detaches protocol driver and cancels init req 5. hci_dev_open (1) releases req lock 6. hci_dev_open (3) grabs req lock, calls hci_init_req, which triggers oops when request is prepared in hci_uart_send_frame [ 137.201263] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 137.209838] pgd = c0004000 [ 137.212677] [00000028] *pgd=00000000 [ 137.216430] Internal error: Oops: 17 [#1] [ 137.220642] Modules linked in: [ 137.223846] CPU: 0 Tainted: G W (3.3.0-rc6-dirty #406) [ 137.230529] PC is at __lock_acquire+0x5c/0x1ab0 [ 137.235290] LR is at lock_acquire+0x9c/0x128 [ 137.239776] pc : [<c0071490>] lr : [<c00733f8>] psr: 20000093 [ 137.239776] sp : cf869dd8 ip : c0529554 fp : c051c730 [ 137.251800] r10: 00000000 r9 : cf8673c0 r8 : 00000080 [ 137.257293] r7 : 00000028 r6 : 00000002 r5 : 00000000 r4 : c053fd70 [ 137.264129] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 137.270965] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 137.278717] Control: 10c5387d Table: 8f0f4019 DAC: 00000015 [ 137.284729] Process kworker/u:1 (pid: 7, stack limit = 0xcf8682e8) [ 137.291229] Stack: (0xcf869dd8 to 0xcf86a000) [ 137.295776] 9dc0: c0529554 00000000 [ 137.304351] 9de0: cf8673c0 cf868000 d03ea1ef cf868000 000001ef 00000470 00000000 00000002 [ 137.312927] 9e00: cf8673c0 00000001 c051c730 c00716ec 0000000c 00000440 c0529554 00000001 [ 137.321533] 9e20: c051c730 cf868000 d03ea1f3 00000000 c053b978 00000000 00000028 cf868000 [ 137.330078] 9e40: 00000000 00000000 00000002 00000000 00000000 c00733f8 00000002 00000080 [ 137.338684] 9e60: 00000000 c02a1d50 00000000 00000001 60000013 c0969a1c 60000093 c053b96c [ 137.347259] 9e80: 00000002 00000018 20000013 c02a1d50 cf0ac000 00000000 00000002 cf868000 [ 137.355834] 9ea0: 00000089 c0374130 00000002 00000000 c02a1d50 cf0ac000 0000000c cf0fc540 [ 137.364410] 9ec0: 00000018 c02a1d50 cf0fc540 00000000 cf0fc540 c0282238 c028220c cf178d80 [ 137.372985] 9ee0: 127525d8 c02821cc 9a1fa451 c032727c 9a1fa451 127525d8 cf0fc540 cf0ac4ec [ 137.381561] 9f00: cf0ac000 cf0fc540 cf0ac584 c03285f4 c0328580 cf0ac4ec cf85c740 c05510cc [ 137.390136] 9f20: ce825400 c004c914 00000002 00000000 c004c884 ce8254f5 cf869f48 00000000 [ 137.398712] 9f40: c0328580 ce825415 c0a7f914 c061af64 00000000 c048cf3c cf8673c0 cf85c740 [ 137.407287] 9f60: c05510cc c051a66c c05510ec c05510c4 cf85c750 cf868000 00000089 c004d6ac [ 137.415863] 9f80: 00000000 c0073d14 00000001 cf853ed8 cf85c740 c004d558 00000013 00000000 [ 137.424438] 9fa0: 00000000 00000000 00000000 c00516b0 00000000 00000000 cf85c740 00000000 [ 137.433013] 9fc0: 00000001 dead4ead ffffffff ffffffff c0551674 00000000 00000000 c0450aa4 [ 137.441589] 9fe0: cf869fe0 cf869fe0 cf853ed8 c005162c c0013b30 c0013b30 00ffff00 00ffff00 [ 137.450164] [<c0071490>] (__lock_acquire+0x5c/0x1ab0) from [<c00733f8>] (lock_acquire+0x9c/0x128) [ 137.459503] [<c00733f8>] (lock_acquire+0x9c/0x128) from [<c0374130>] (_raw_spin_lock_irqsave+0x44/0x58) [ 137.469360] [<c0374130>] (_raw_spin_lock_irqsave+0x44/0x58) from [<c02a1d50>] (skb_queue_tail+0x18/0x48) [ 137.479339] [<c02a1d50>] (skb_queue_tail+0x18/0x48) from [<c0282238>] (h4_enqueue+0x2c/0x34) [ 137.488189] [<c0282238>] (h4_enqueue+0x2c/0x34) from [<c02821cc>] (hci_uart_send_frame+0x34/0x68) [ 137.497497] [<c02821cc>] (hci_uart_send_frame+0x34/0x68) from [<c032727c>] (hci_send_frame+0x50/0x88) [ 137.507171] [<c032727c>] (hci_send_frame+0x50/0x88) from [<c03285f4>] (hci_cmd_work+0x74/0xd4) [ 137.516204] [<c03285f4>] (hci_cmd_work+0x74/0xd4) from [<c004c914>] (process_one_work+0x1a0/0x4ec) [ 137.525604] [<c004c914>] (process_one_work+0x1a0/0x4ec) from [<c004d6ac>] (worker_thread+0x154/0x344) [ 137.535278] [<c004d6ac>] (worker_thread+0x154/0x344) from [<c00516b0>] (kthread+0x84/0x90) [ 137.543975] [<c00516b0>] (kthread+0x84/0x90) from [<c0013b30>] (kernel_thread_exit+0x0/0x8) [ 137.552734] Code: e59f4e5c e5941000 e3510000 0a000031 (e5971000) [ 137.559234] ---[ end trace 1b75b31a2719ed1e ]--- Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Jun Nie authored
commit d9319560 upstream. If we fail to find a hci device pointer in hci_uart, don't try to deref the NULL one we do have. Signed-off-by:
Jun Nie <njun@marvell.com> Signed-off-by:
Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by:
-
Salman Qazi authored
commit 9993bc63 upstream. When a machine boots up, the TSC generally gets reset. However, when kexec is used to boot into a kernel, the TSC value would be carried over from the previous kernel. The computation of cycns_offset in set_cyc2ns_scale is prone to an overflow, if the machine has been up more than 208 days prior to the kexec. The overflow happens when we multiply *scale, even though there is enough room to store the final answer. We fix this issue by decomposing tsc_now into the quotient and remainder of division by CYC2NS_SCALE_FACTOR and then performing the multiplication separately on the two components. Refactor code to share the calculation with the previous fix in __cycles_2_ns(). Signed-off-by:
Salman Qazi <sqazi@google.com> Acked-by:
John Stultz <john.stultz@linaro.org> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: john stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/20120310004027.19291.88460.stgit@dungbeetle.mtv.corp.google.comSigned-off-by:
Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by:
-
Dan Carpenter authored
commit 6d8d1749 upstream. There is no point in passing a zero length string here and quite a few of that cache_parse() implementations will Oops if count is zero. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Jan Kara authored
commit d97d32ed upstream. When an IO error happens during inode deletion run from xlog_recover_process_iunlinks() filesystem gets shutdown. Thus any subsequent attempt to read buffers fails. Code in xlog_recover_process_iunlinks() does not count with the fact that read of a buffer which was read a while ago can really fail which results in the oops on agi = XFS_BUF_TO_AGI(agibp); Fix the problem by cleaning up the buffer handling in xlog_recover_process_iunlinks() as suggested by Dave Chinner. We release buffer lock but keep buffer reference to AG buffer. That is enough for buffer to stay pinned in memory and we don't have to call xfs_read_agi() all the time. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
-
Theodore Ts'o authored
commit 31d4f3a2 upstream. Explicitly test for an extent whose length is zero, and flag that as a corrupted extent. This avoids a kernel BUG_ON assertion failure. Tested: Without this patch, the file system image found in tests/f_ext_zero_len/image.gz in the latest e2fsprogs sources causes a kernel panic. With this patch, an ext4 file system error is noted instead, and the file system is marked as being corrupted. https://bugzilla.kernel.org/show_bug.cgi?id=42859Signed-off-by:
-
Trond Myklebust authored
commit 540a0f75 upstream. The problem is that for the case of priority queues, we have to assume that __rpc_remove_wait_queue_priority will move new elements from the tk_wait.links lists into the queue->tasks[] list. We therefore cannot use list_for_each_entry_safe() on queue->tasks[], since that will skip these new tasks that __rpc_remove_wait_queue_priority is adding. Without this fix, rpc_wake_up and rpc_wake_up_status will both fail to wake up all functions on priority wait queues, which can result in some nasty hangs. Reported-by:
Andy Adamson <andros@netapp.com> Signed-off-by:
-
Sasha Levin authored
commit a078c6d0 upstream. 'long secs' is passed as divisor to div_s64, which accepts a 32bit divisor. On 64bit machines that value is trimmed back from 8 bytes back to 4, causing a divide by zero when the number is bigger than (1 << 32) - 1 and all 32 lower bits are 0. Use div64_long() instead. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 656d2b39 upstream. On some misconfigured ftdi_sio devices, if the manufacturer string is NULL, the kernel will oops when the device is plugged in. This patch fixes the problem. Reported-by:
Wojciech M Zabolotny <W.Zabolotny@elka.pw.edu.pl> Tested-by:
-
Ryusuke Konishi authored
commit d7178c79 upstream. According to the report from Slicky Devil, nilfs caused kernel oops at nilfs_load_super_block function during mount after he shrank the partition without resizing the filesystem: BUG: unable to handle kernel NULL pointer dereference at 00000048 IP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2] *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP ... Call Trace: [<d0d7a87b>] init_nilfs+0x4b/0x2e0 [nilfs2] [<d0d6f707>] nilfs_mount+0x447/0x5b0 [nilfs2] [<c0226636>] mount_fs+0x36/0x180 [<c023d961>] vfs_kern_mount+0x51/0xa0 [<c023ddae>] do_kern_mount+0x3e/0xe0 [<c023f189>] do_mount+0x169/0x700 [<c023fa9b>] sys_mount+0x6b/0xa0 [<c04abd1f>] sysenter_do_call+0x12/0x28 Code: 53 18 8b 43 20 89 4b 18 8b 4b 24 89 53 1c 89 43 24 89 4b 20 8b 43 20 c7 43 2c 00 00 00 00 23 75 e8 8b 50 68 89 53 28 8b 54 b3 20 <8b> 72 48 8b 7a 4c 8b 55 08 89 b3 84 00 00 00 89 bb 88 00 00 00 EIP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2] SS:ESP 0068:ca9bbdcc CR2: 0000000000000048 This turned out due to a defect in an error path which runs if the calculated location of the secondary super block was invalid. This patch fixes it and eliminates the reported oops. Reported-by:
Slicky Devil <slicky.dvl@gmail.com> Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Carpenter authored
commit ea5f4db8 upstream. "mem" is type u8. We need parenthesis here or it screws up the pointer math probably leading to an oops. Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 03606895 ] Niccolo Belli reported ipsec crashes in case we handle a frame without mac header (atm in his case) Before copying mac header, better make sure it is present. Bugzilla reference: https://bugzilla.kernel.org/show_bug.cgi?id=42809Reported-by:
Niccol Belli <darkbasic@linuxsystems.it> Tested-by:
-
Thomas Gleixner authored
commit a7f4255f upstream. Commit f0fbf0ab ("x86: integrate delay functions") converted delay_tsc() into a random delay generator for 64 bit. The reason is that it merged the mostly identical versions of delay_32.c and delay_64.c. Though the subtle difference of the result was: static void delay_tsc(unsigned long loops) { - unsigned bclock, now; + unsigned long bclock, now; Now the function uses rdtscl() which returns the lower 32bit of the TSC. On 32bit that's not problematic as unsigned long is 32bit. On 64 bit this fails when the lower 32bit are close to wrap around when bclock is read, because the following check if ((now - bclock) >= loops) break; evaluated to true on 64bit for e.g. bclock = 0xffffffff and now = 0 because the unsigned long (now - bclock) of these values results in 0xffffffff00000001 which is definitely larger than the loops value. That explains Tvortkos observation: "Because I am seeing udelay(500) (_occasionally_) being short, and that by delaying for some duration between 0us (yep) and 491us." Make those variables explicitely u32 again, so this works for both 32 and 64 bit. Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by:
-
David S. Miller authored
commit 8f49c270 upstream. Alexey Kuznetsov noticed a regression introduced by commit f1ecd5d9 ("Revert Backoff [v3]: Revert RTO on ICMP destination unreachable") The RTO and timer modification code added to tcp_v4_err() doesn't check sock_owned_by_user(), which if true means we don't have exclusive access to the socket and therefore cannot modify it's critical state. Just skip this new code block if sock_owned_by_user() is true and eliminate the now superfluous sock_owned_by_user() code block contained within. Reported-by:
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by:
-
Oleg Nesterov authored
commit 79549c6d upstream keyctl_session_to_parent(task) sets ->replacement_session_keyring, it should be processed and cleared by key_replace_session_keyring(). However, this task can fork before it notices TIF_NOTIFY_RESUME and the new child gets the bogus ->replacement_session_keyring copied by dup_task_struct(). This is obviously wrong and, if nothing else, this leads to put_cred(already_freed_cred). change copy_creds() to clear this member. If copy_process() fails before this point the wrong ->replacement_session_keyring doesn't matter, exit_creds() won't be called. Cc: <stable@vger.kernel.org> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 6f24f892 upstream Commit ec81aecb ("hfs: fix a potential buffer overflow") fixed a few potential buffer overflows in the hfs filesystem. But as Timo Warns pointed out, these changes also need to be made on the hfsplus filesystem as well. Reported-by:
Timo Warns <warns@pre-sense.de> Acked-by:
WANG Cong <amwang@redhat.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Sage Weil <sage@newdream.net> Cc: Eugene Teo <eteo@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dave Anderson <anderson@redhat.com> Cc: stable <stable@vger.kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jeff Mahoney authored
commit 1bb57e94 upstream The dl2k driver's rio_ioctl call has a few issues: - No permissions checking - Implements SIOCGMIIREG and SIOCGMIIREG using the SIOCDEVPRIVATE numbers - Has a few ioctls that may have been used for debugging at one point but have no place in the kernel proper. This patch removes all but the MII ioctls, renumbers them to use the standard ones, and adds the proper permission check for SIOCSMIIREG. We can also get rid of the dl2k-specific struct mii_data in favor of the generic struct mii_ioctl_data. Since we have the phyid on hand, we can add the SIOCGMIIPHY ioctl too. Most of the MII code for the driver could probably be converted to use the generic MII library but I don't have a device to test the results. Reported-by:
Stephan Mueller <stephan.mueller@atsec.com> Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Francois Romieu authored
commit 78f6a6bd upstream Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> [dannf: backported to Debian's 2.6.32] Signed-off-by:
-
Jason Wang authored
commit cc9b17ad upstream We need to validate the number of pages consumed by data_len, otherwise frags array could be overflowed by userspace. So this patch validate data_len and return -EMSGSIZE when data_len may occupies more frags than MAX_SKB_FRAGS. Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
David Gibson authored
commit 90481622 upstream hugetlbfs_{get,put}_quota() are badly named. They don't interact with the general quota handling code, and they don't much resemble its behaviour. Rather than being about maintaining limits on on-disk block usage by particular users, they are instead about maintaining limits on in-memory page usage (including anonymous MAP_PRIVATE copied-on-write pages) associated with a particular hugetlbfs filesystem instance. Worse, they work by having callbacks to the hugetlbfs filesystem code from the low-level page handling code, in particular from free_huge_page(). This is a layering violation of itself, but more importantly, if the kernel does a get_user_pages() on hugepages (which can happen from KVM amongst others), then the free_huge_page() can be delayed until after the associated inode has already been freed. If an unmount occurs at the wrong time, even the hugetlbfs superblock where the "quota" limits are stored may have been freed. Andrew Barry proposed a patch to fix this by having hugepages, instead of storing a pointer to their address_space and reaching the superblock from there, had the hugepages store pointers directly to the superblock, bumping the reference count as appropriate to avoid it being freed. Andrew Morton rejected that version, however, on the grounds that it made the existing layering violation worse. This is a reworked version of Andrew's patch, which removes the extra, and some of the existing, layering violation. It works by introducing the concept of a hugepage "subpool" at the lower hugepage mm layer - that is a finite logical pool of hugepages to allocate from. hugetlbfs now creates a subpool for each filesystem instance with a page limit set, and a pointer to the subpool gets added to each allocated hugepage, instead of the address_space pointer used now. The subpool has its own lifetime and is only freed once all pages in it _and_ all other references to it (i.e. superblocks) are gone. subpools are optional - a NULL subpool pointer is taken by the code to mean that no subpool limits are in effect. Previous discussion of this bug found in: "Fix refcounting in hugetlbfs quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or http://marc.info/?l=linux-mm&m=126928970510627&w=1 v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to alloc_huge_page() - since it already takes the vma, it is not necessary. Signed-off-by:
Andrew Barry <abarry@cray.com> Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
