Much of the driver uses cpu_to_le32() to convert values for descriptors
to little endian before writing.  Use __le32 to define the hardware-
accessed parts of the descriptors, and ensure most places where it's
reasonable to do so use cpu_to_le32() when assigning to these.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When tdma->src is freed in mv_cesa_dma_cleanup(), we convert the DMA
address from a little-endian value prior to calling dma_pool_free().
However, mv_cesa_dma_add_op() assigns tdma->src without first converting
the DMA address to little endian.  Fix this.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use the IO memcpy() functions when copying from/to MMIO memory.
These locations were found via sparse.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use gfp_t not u32 for the GFP flags.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

cur_dma is part of the software state, not read by the hardware.
Storing it in LE32 format is wrong, use dma_addr_t for this.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use relaxed IO accessors where appropriate.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The kernel's coding style suggests that closing braces for initialisers
should not be aligned to the open brace column.  The CodingStyle doc
shows how this should be done.  Remove the additional tab.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Avoid exporting lots of state by only exporting what we really require,
which is the buffer containing the set of pending bytes to be hashed,
number of pending bytes, the context buffer, and the function pointer
state.  This reduces down the exported state size to 216 bytes from
576 bytes.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

caam does not properly calculate the size of the retained state
when non-block aligned hashes are requested - it uses the wrong
buffer sizes, which results in errors such as:

caam_jr 2102000.jr1: 40000501: DECO: desc idx 5: SGT Length Error. The descriptor is trying to read more data than is contained in the SGT table.

We end up here with:

in_len 0x46 blocksize 0x40 last_bufsize 0x0 next_bufsize 0x6
to_hash 0x40 ctx_len 0x28 nbytes 0x20

which results in a job descriptor of:

jobdesc@889: ed03d918: b0861c08 3daa0080 f1400000 3d03d938
jobdesc@889: ed03d928: 00000068 f8400000 3cde2a40 00000028

where the word at 0xed03d928 is the expected data size (0x68), and a
scatterlist containing:

sg@892: ed03d938: 00000000 3cde2a40 00000028 00000000
sg@892: ed03d948: 00000000 3d03d100 00000006 00000000
sg@892: ed03d958: 00000000 7e8aa700 40000020 00000000

0x68 comes from 0x28 (the context size) plus the "in_len" rounded down
to a block size (0x40).  in_len comes from 0x26 bytes of unhashed data
from the previous operation, plus the 0x20 bytes from the latest
operation.

The fixed version would create:

sg@892: ed03d938: 00000000 3cde2a40 00000028 00000000
sg@892: ed03d948: 00000000 3d03d100 00000026 00000000
sg@892: ed03d958: 00000000 7e8aa700 40000020 00000000

which replaces the 0x06 length with the correct 0x26 bytes of previously
unhashed data.

This fixes a previous commit which erroneously "fixed" this due to a
DMA-API bug report; that commit indicates that the bug was caused via a
test_ahash_pnum() function in the tcrypt module.  No such function has
ever existed in the mainline kernel.  Given that the change in this
commit has been tested with DMA API debug enabled and shows no issue,
I can only conclude that test_ahash_pnum() was triggering that bad
behaviour by CAAM.

Fixes: 7d5196ab ("crypto: caam - Correct DMA unmap size in ahash_update_ctx()")
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When exporting and importing the hash state, we will only export and
import into hashes which share the same struct crypto_ahash pointer.
(See hash_accept->af_alg_accept->hash_accept_parent.)

This means that saving the caam_hash_ctx structure on export, and
restoring it on import is a waste of resources.  So, remove this code.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Print the errno code when hash registration fails, so we know why the
failure occurred.  This aids debugging.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

To: Boris Brezillon <boris.brezillon@free-electrons.com>,Arnaud Ebalard <arno@natisbad.org>,Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,Jason Cooper <jason@lakedaemon.net>

The local chain variable is not cleaned up if an error occurs in the middle
of DMA chain creation. Fix that by dropping the local chain variable and
using the dreq->chain field which will be cleaned up by
mv_cesa_dma_cleanup() in case of errors.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When adding the software padding, this must be done using the first/mid
fragment mode, and any subsequent operation needs to be a mid-fragment.
Fix this.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Rearrange the last request handling for hashes which require software
padding.

We prepare the padding to be appended, and then append as much of the
padding to any existing data that's already queued up, adding an
operation block and launching the operation.

Any remainder is then appended as a separate operation.

This ensures that the hardware only ever sees multiples of the hash
block size to be operated on for software padded hashes, thus ensuring
that the engine always indicates that it has finished the calculation.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Rearrange the last request handling for hardware finished hashes
by moving the generation of the fragment operation into this path.
This results in a simplified sequence to handle this case, and
allows us to move the software padded case further down into the
function.  Add comments describing these parts.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move the test for the last request out of mv_cesa_ahash_dma_last_req()
to its caller, and move the mv_cesa_dma_add_frag() down into this
function.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Avoid adding the final operation within the loop, but instead add it
outside.  We combine this with the handling for the no-data case.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When we process the last request of data, and the request contains user
data, the loop in mv_cesa_ahash_dma_req_init() marks the first data size
as being iter.base.op_len which does not include the size of the cache
data.  This means we end up hashing an insufficient amount of data.

Fix this by always including the cache size in the first operation
length of any request.

This has the effect that for a request containing no user data,

	iter.base.op_len === iter.src.op_offset === creq->cache_ptr

As a result, we include one further change to use iter.base.op_len in
the cache-but-no-user-data case to make the next change clearer.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use the presence of the scatterlist to determine whether we should load
any new user data to the engine.  The following shall always be true at
this point:

	iter.base.op_len == 0 === iter.src.sg

In doing so, we can:

1. eliminate the test for iter.base.op_len inside the loop, which
   makes the loop operation more obvious and understandable.

2. move the operation generation for the cache-only case.

This prepares the code for the next step in its transformation, and also
uncovers a bug that will be fixed in the next patch.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move the calls to mv_cesa_dma_add_frag() into the parent function,
mv_cesa_ahash_dma_req_init().  This is in preparation to changing
when we generate the operation blocks, as we need to avoid generating
a block for a partial hash block at the end of the user data.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If we add a template first-fragment operation, always update the
template to be a mid-fragment.  This ensures that mid-fragments
always follow on from a first fragment in every case.

This means we can move the first to mid-fragment update code out of
mv_cesa_ahash_dma_add_data().
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a helper to add the fragment operation block followed by the DMA
entry to launch the operation.

Although at the moment this pattern only strictly appears at one site,
two other sites can be factored as well by slightly changing the order
in which the DMA operations are performed.  This should be harmless as
the only thing which matters is to have all the data loaded into SRAM
prior to launching the operation.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Multiple locations in the driver test the operation context fragment
type, checking whether it is a first fragment or not.  Introduce a
mv_cesa_mac_op_is_first_frag() helper, which returns true if the
fragment operation is for a first fragment.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

mv_cesa_get_op_cfg() does not write to its argument, it only reads.
So, let's make it const.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Ensure that the template operation is fully initialised, otherwise we
end up loading data from the kernel stack into the engines, which can
upset the hash results.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The endianness of the bit length used in the final stage depends on the
endianness of the algorithm - md5 hashes need it to be in little endian
format, whereas SHA hashes need it in big endian format.  Use the
previously added algorithm endianness flag to control this.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Rather than determining whether we're using a MD5 hash by looking at
the digest size, switch to a cleaner solution using a per-request flag
initialised by the method type.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently, we read/write the state in CPU endian, but on the final
request, we convert its endian according to the requested algorithm.
(md5 is little endian, SHA are big endian.)

Always keep creq->state in CPU native endian format, and perform the
necessary conversion when copying the hash to the result.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There's an easier way to get at the hash transform - rather than
using crypto_ahash_tfm(ahash), we can get it directly from
req->base.tfm.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds the missing helper crypto_ahash_blocksize which
returns the block size of an ahash algorithm.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The patch fixes the analysis of the input data which contains an off
by one.

The issue is visible when the SGL contains one byte per SG entry.
The code for checking for zero bytes does not operate on the data byte.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

qat_crypto_get_instance_node function needs to handle situation when the
first dev in the list is not started.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently this driver calls pm_runtime_get_sync() rampantly
but never puts anything back. This makes it impossible for the
device to autosuspend properly; it will remain fully active
after the first use.

Fix in the obvious way.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The define SHA1_DIGEST_LENGTH is not used anywhere, so remove it.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some array of const char are not set as const.
This patch fix that.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some array of const char are not set as const.
This patch fix that.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

SHA_MAX_STATE_SIZE is just the number of u32 word for SHA512.
So replace the raw value "16" by their meaning (SHA512_DIGEST_SIZE / 4)
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The testmanager code for symmetric ciphers is extended to allow
verification of the IV after a cipher operation.

In addition, test vectors for kw(aes) for encryption and decryption are
added.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Hook keywrap source code into Kconfig and Makefile
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch implements the AES key wrapping as specified in
NIST SP800-38F and RFC3394.

The implementation covers key wrapping without padding.

IV handling: The caller does not provide an IV for encryption,
but must obtain the IV after encryption which would serve as the first
semblock in the ciphertext structure defined by SP800-38F. Conversely,
for decryption, the caller must provide the first semiblock of the data
as the IV and the following blocks as ciphertext.

The key wrapping is an authenticated decryption operation. The caller
will receive EBADMSG during decryption if the authentication failed.

Albeit the standards define the key wrapping for AES only, the template
can be used with any other block cipher that has a block size of 16
bytes. During initialization of the template, that condition is checked.
Any cipher not having a block size of 16 bytes will cause the
initialization to fail.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>