Some highly optimised applications use SO_INCOMING_CPU to make them
efficient, but they didn't test if it's working correctly by getsockopt()
to avoid slowing down.  As a result, no one noticed it had been broken
for years, so it's a good time to add a test to catch future regression.

The test does

  1) Create $(nproc) TCP listeners associated with each CPU.

  2) Create 32 child sockets for each listener by calling
     sched_setaffinity() for each CPU.

  3) Check if accept()ed sockets' sk_incoming_cpu matches
     listener's one.

If we see -EAGAIN, SO_INCOMING_CPU is broken.  However, we might not see
any error even if broken; the kernel could miraculously distribute all SYN
to correct listeners.  Not to let that happen, we must increase the number
of clients and CPUs to some extent, so the test requires $(nproc) >= 2 and
creates 64 sockets at least.

Test:
  $ nproc
  96
  $ ./so_incoming_cpu

Before the previous patch:

  # Starting 12 tests from 5 test cases.
  #  RUN           so_incoming_cpu.before_reuseport.test1 ...
  # so_incoming_cpu.c:191:test1:Expected cpu (5) == i (0)
  # test1: Test terminated by assertion
  #          FAIL  so_incoming_cpu.before_reuseport.test1
  not ok 1 so_incoming_cpu.before_reuseport.test1
  ...
  # FAILED: 0 / 12 tests passed.
  # Totals: pass:0 fail:12 xfail:0 xpass:0 skip:0 error:0

After:

  # Starting 12 tests from 5 test cases.
  #  RUN           so_incoming_cpu.before_reuseport.test1 ...
  # so_incoming_cpu.c:199:test1:SO_INCOMING_CPU is very likely to be working correctly with 3072 sockets.
  #            OK  so_incoming_cpu.before_reuseport.test1
  ok 1 so_incoming_cpu.before_reuseport.test1
  ...
  # PASSED: 12 / 12 tests passed.
  # Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Kazuho Oku reported that setsockopt(SO_INCOMING_CPU) does not work
with setsockopt(SO_REUSEPORT) since v4.6.

With the combination of SO_REUSEPORT and SO_INCOMING_CPU, we could
build a highly efficient server application.

setsockopt(SO_INCOMING_CPU) associates a CPU with a TCP listener
or UDP socket, and then incoming packets processed on the CPU will
likely be distributed to the socket.  Technically, a socket could
even receive packets handled on another CPU if no sockets in the
reuseport group have the same CPU receiving the flow.

The logic exists in compute_score() so that a socket will get a higher
score if it has the same CPU with the flow.  However, the score gets
ignored after the blamed two commits, which introduced a faster socket
selection algorithm for SO_REUSEPORT.

This patch introduces a counter of sockets with SO_INCOMING_CPU in
a reuseport group to check if we should iterate all sockets to find
a proper one.  We increment the counter when

  * calling listen() if the socket has SO_INCOMING_CPU and SO_REUSEPORT

  * enabling SO_INCOMING_CPU if the socket is in a reuseport group

Also, we decrement it when

  * detaching a socket out of the group to apply SO_INCOMING_CPU to
    migrated TCP requests

  * disabling SO_INCOMING_CPU if the socket is in a reuseport group

When the counter reaches 0, we can get back to the O(1) selection
algorithm.

The overall changes are negligible for the non-SO_INCOMING_CPU case,
and the only notable thing is that we have to update sk_incomnig_cpu
under reuseport_lock.  Otherwise, the race prevents transitioning to
the O(n) algorithm and results in the wrong socket selection.

 cpu1 (setsockopt)               cpu2 (listen)
+-----------------+             +-------------+

lock_sock(sk1)                  lock_sock(sk2)

reuseport_update_incoming_cpu(sk1, val)
.
|  /* set CPU as 0 */
|- WRITE_ONCE(sk1->incoming_cpu, val)
|
|                               spin_lock_bh(&reuseport_lock)
|                               reuseport_grow(sk2, reuse)
|                               .
|                               |- more_socks_size = reuse->max_socks * 2U;
|                               |- if (more_socks_size > U16_MAX &&
|                               |       reuse->num_closed_socks)
|                               |  .
|                               |  |- RCU_INIT_POINTER(sk1->sk_reuseport_cb, NULL);
|                               |  `- __reuseport_detach_closed_sock(sk1, reuse)
|                               |     .
|                               |     `- reuseport_put_incoming_cpu(sk1, reuse)
|                               |        .
|                               |        |  /* Read shutdown()ed sk1's sk_incoming_cpu
|                               |        |   * without lock_sock().
|                               |        |   */
|                               |        `- if (sk1->sk_incoming_cpu >= 0)
|                               |           .
|                               |           |  /* decrement not-yet-incremented
|                               |           |   * count, which is never incremented.
|                               |           |   */
|                               |           `- __reuseport_put_incoming_cpu(reuse);
|                               |
|                               `- spin_lock_bh(&reuseport_lock)
|
|- spin_lock_bh(&reuseport_lock)
|
|- reuse = rcu_dereference_protected(sk1->sk_reuseport_cb, ...)
|- if (!reuse)
|  .
|  |  /* Cannot increment reuse->incoming_cpu. */
|  `- goto out;
|
`- spin_unlock_bh(&reuseport_lock)

Fixes: e32ea7e7 ("soreuseport: fast reuseport UDP socket selection")
Fixes: c125e80b ("soreuseport: fast reuseport TCP socket selection")
Reported-by: Kazuho Oku <kazuhooku@gmail.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Alex Elder says:

====================
net: ipa: validation cleanup

This series gathers a set of IPA driver cleanups, mostly involving
code that ensures certain things are known to be correct *early*
(either at build or initializatin time), so they can be assumed good
during normal operation.

The first removes three constant symbols, by making a (reasonable)
assumption that a routing table consists of entries for the modem
followed by entries for the AP, with no unused entries between them.

The second removes two checks that are redundant (they verify the
sizes of two memory regions are in range, which will have been done
earlier for all regions).

The third adds some new checks to routing and filter tables that
can be done at "init time" (without requiring any access to IPA
hardware).

The fourth moves a check that routing and filter table addresses can
be encoded within certain IPA immediate commands, so it's performed
earlier; the checks can be done without touching IPA hardware.  The
fifth moves some other command-related checks earlier, for the same
reason.

The sixth removes the definition ipa_table_valid(), because what it
does has become redundant.  Finally, the last patch moves two more
validation calls so they're done very early in the probe process.
This will be required by some upcoming patches, which will record
the size of the routing and filter tables at this time so they're
available for subsequent initialization.
====================

Link: https://lore.kernel.org/r/20221021191340.4187935-1-elder@linaro.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Verify that the sizes of the routing and filter table memory regions
are valid as part of memory initialization, rather than waiting for
table initialization.  The main reason to do this is that upcoming
patches use these memory region sizes to determine the number of
entries in these tables, and we'll want to know these sizes are good
sooner.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

What ipa_table_valid() (and ipa_table_valid_one(), which it calls)
does is ensure that the memory regions that hold routing and filter
tables have reasonable size.  Specifically, it checks that the size
of a region is sufficient (or rather, exactly the right size) to
hold the maximum number of entries supported by the driver.  (There
is an additional check that's erroneous, but in practice it is never
reached.)

Recently ipa_table_mem_valid() was added, which is called by
ipa_table_init().  That function verifies that all table memory
regions are of sufficient size, and requires hashed tables to have
zero size if hashing is not supported.  It only ensures the filter
table is large enough to hold the number of endpoints that support
filtering, but that is adequate.

Therefore everything that ipa_table_valid() does is redundant, so
get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, ipa_cmd_data_valid() is called by ipa_mem_config().
Nothing it does requires access to hardware though, so it can be
done during the init phase of IPA driver startup.

Create a new function ipa_cmd_init(), whose purpose is to do early
initialization related to IPA immediate commands.  It will call the
build-time validation function, then will make the two calls made
previously by ipa_cmd_data_valid().  This make ipa_cmd_data_valid()
unnecessary, so get rid of it.

Rename ipa_cmd_header_valid() to be ipa_cmd_header_init_local_valid(),
so its name is clearer about which IPA immediate command it is
associated with.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

We currently verify the table size and offset fit in the immediate
command fields that must encode them in ipa_table_valid_one().  We
can now make this check earlier, in ipa_table_mem_valid().

The non-hashed IPv4 filter and route tables will always exist, and
their sizes will match the IPv6 tables, as well as the hashed tables
(if supported).  So it's sufficient to verify the offset and size of
the IPv4 non-hashed tables fit into these fields.

Rename the function ipa_cmd_table_init_valid(), to reinforce that
it is the TABLE_INIT immediate command fields we're checking.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add checks in ipa_table_init() to ensure the memory regions defined
for IPA filter and routing tables are valid.

For routing tables, the checks ensure:
  - The non-hashed IPv4 and IPv6 routing tables are defined
  - The non-hashed IPv4 and IPv6 routing tables are the same size
  - The number entries in the non-hashed IPv4 routing table is enough
    to hold the number entries available to the modem, plus at least
    one usable by the AP.

For filter tables, the checks ensure:
  - The non-hashed IPv4 and IPv6 filter tables are defined
  - The non-hashed IPv4 and IPv6 filter tables are the same size
  - The number entries in the non-hashed IPv4 filter table is enough
    to hold the endpoint bitmap, plus an entry for each defined
    endpoint that supports filtering.

In addition, for both routing and filter tables:
  - If hashing isn't supported (IPA v4.2), hashed tables are zero size
  - If hashing *is* supported, all hashed tables are the same size as
    their non-hashed counterparts.

When validating the size of routing tables, require the AP to have
at least one entry (in addition to those used by the modem).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

There's no need to ensure table memory regions fit within the
IPA-local memory range.  And there's no need to ensure the modem
header memory region is in range either.  These are verified for all
memory regions in ipa_mem_size_valid(), once we have settled on the
size of IPA memory.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The entries in each IPA routing table are divided between the modem
and the AP.  The modem always gets some number of entries located at
the base of the table; the AP gets all those that follow.

There's no reason to think the modem will use anything different
from the first entries in a routing table, so:
  - Get rid of IPA_ROUTE_MODEM_MIN (just assume it's 0)
  - Get rid of IPA_ROUTE_AP_MIN (just assume it's IPA_ROUTE_MODEM_COUNT)
And finally:
  - Open-code IPA_ROUTE_AP_COUNT and remove its definition
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Amritha Nambiar says:

====================
Extend action skbedit to RX queue mapping

Based on the discussion on
https://lore.kernel.org/netdev/166260012413.81018.8010396115034847972.stgit@anambiarhost.jf.intel.com/ ,
the following series extends skbedit tc action to RX queue mapping.
Currently, skbedit action in tc allows overriding of transmit queue.
Extending this ability of skedit action supports the selection of
receive queue for incoming packets. On the receive side, this action
is supported only in hardware, so the skip_sw flag is enforced.

Enabled ice driver to offload this type of filter into the hardware
for accepting packets to the device's receive queue.
====================

Link: https://lore.kernel.org/r/166633888716.52141.3425659377117969638.stgit@anambiarhost.jf.intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add tc-queue-filters.rst with notes on TC filters for
selecting a set of queues and/or a queue.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch uses TC skbedit queue_mapping action to support
forwarding packets to a device queue. Such filters with action
forward to queue will be the highest priority switch filter in
HW.
Example:
$ tc filter add dev ens4f0 protocol ip ingress flower\
  dst_ip 192.168.1.12 ip_proto tcp dst_port 5001\
  action skbedit queue_mapping 5 skip_sw

The above command adds an ingress filter, incoming packets
qualifying the match will be accepted into queue 5. The queue
number is in decimal format.

Refactored ice_add_tc_flower_adv_fltr() to consolidate code with
action FWD_TO_VSI and FWD_TO QUEUE.
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add support for skbedit queue mapping action on receive
side. This is supported only in hardware, so the skip_sw
flag is enforced. This enables offloading filters for
receive queue selection in the hardware using the
skbedit action. Traffic arrives on the Rx queue requested
in the skbedit action parameter. A new tc action flag
TCA_ACT_FLAGS_AT_INGRESS is introduced to identify the
traffic direction the action queue_mapping is requested
on during filter addition. This is used to disallow
offloading the skbedit queue mapping action on transmit
side.

Example:
$tc filter add dev $IFACE ingress protocol ip flower dst_ip $DST_IP\
 action skbedit queue_mapping $rxq_id skip_sw
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Russell King says:

====================
net: sfp: improve high power module implementation

This series aims to improve the power level switching between standard
level 1 and the higher power levels.

The first patch updates the DT binding documentation to include the
minimum and default of 1W, which is the base level that every SFP cage
must support. Hence, it makes sense to document this in the binding.

The second patch enforces a minimum of 1W when parsing the firmware
description, and optimises the code for that case; there's no need to
check for SFF8472 compliance since we will not need to touch the
A2h registers.

Patch 3 validates that the module supports SFF-8472 rev 10.2 before
checking for power level 2 - rev 10.2 is where support for power
levels was introduced, so if the module doesn't support this revision,
it doesn't support power levels. Setting the power level 2 declaration
bit is likely to be spurious.

Patch 4 does the same for power level 3, except this was introduced in
SFF-8472 rev 11.9. The revision code was never updated, so we use the
rev 11.4 to signify this.

Patch 5 cleans up the code - rather than using BIT(0), we now use a
properly named value for the power level select bit.

Patch 6 introduces a read-modify-write helper.

Patch 7 gets rid of the DM7052 hack (which sets a power level
declaration bit but is not compatible with SFF-8472 rev 10.2, and
the module does not implement the A2h I2C address.)

Series tested with my DM7052.

v2: update sff.sfp.yaml with Rob's feedback
====================

Andrew's review tags from v1.

Link: https://lore.kernel.org/r/Y0%2F7dAB8OU3jrbz6@shell.armlinux.org.uk
Link: https://lore.kernel.org/r/Y1K17UtfFopACIi2@shell.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since we no longer mis-detect high-power mode with the DM7052 module,
we no longer need the hack in sfp_module_enable_high_power(), and can
now switch this to use sfp_modify_u8().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a helper to modify bits in a single byte in memory space, and use
it when updating the soft tx-disable flag in the module.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Provide a named definition for the power level select bit in the
extended status register, rather than using BIT(0) in the code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Power level 3 was included in SFF-8472 revision 11.9, but this does
not have a compliance code. Use revision 11.4 as the minimum
compliance level instead.

This should avoid any spurious indication of 2W modules.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Power level 2 was introduced by SFF-8472 revision 10.2. Ignore
the power declaration bit for modules that are not compliant with
at least this revision.

This should remove any spurious indication of 1.5W modules.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Check that the firmware provided maximum power is at least 1W, which
is the minimum power level for any SFP module.

Now that we enforce the minimum of 1W, we can exit early from
sfp_module_parse_power() if the module power is 1W or less.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a minimum and default for the maximum-power-milliwatt option;
module power levels were originally up to 1W, so this is the default
and the minimum power level we can have for a functional SFP cage.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Michael Chan says:

====================
bnxt_en: Driver updates

This patchset adds .get_module_eeprom_by_page() support and adds
an NVRAM resize step to allow larger firmware images to be flashed
to older firmware.
====================

Link: https://lore.kernel.org/r/1666334243-23866-1-git-send-email-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Resize of the UPDATE entry is required if the image to
be flashed is larger than the available space. Add this step,
otherwise flashing larger firmware images by ethtool or devlink
may fail.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for .get_module_eeprom_by_page() callback which
implements generic solution for module`s eeprom access.

v3: Add bnxt_get_module_status() to get a more specific extack error
    string.
    Return -EINVAL from bnxt_get_module_eeprom_by_page() when we
    don't want to fallback to old method.
v2: Simplification suggested by Ido Schimmel

Link: https://lore.kernel.org/netdev/YzVJ%2FvKJugoz15yV@shredder/Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The main changes are PTM timestamp support, CMIS EEPROM support, and
asymmetric CoS queues support.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

include/linux/net.h
  a5ef058d ("net: introduce and use custom sockopt socket flag")
  e993ffe3 ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf.

  The net-memcg fix stands out, the rest is very run-off-the-mill. Maybe
  I'm biased.

  Current release - regressions:

   - eth: fman: re-expose location of the MAC address to userspace,
     apparently some udev scripts depended on the exact value

  Current release - new code bugs:

   - bpf:
       - wait for busy refill_work when destroying bpf memory allocator
       - allow bpf_user_ringbuf_drain() callbacks to return 1
       - fix dispatcher patchable function entry to 5 bytes nop

  Previous releases - regressions:

   - net-memcg: avoid stalls when under memory pressure

   - tcp: fix indefinite deferral of RTO with SACK reneging

   - tipc: fix a null-ptr-deref in tipc_topsrv_accept

   - eth: macb: specify PHY PM management done by MAC

   - tcp: fix a signed-integer-overflow bug in tcp_add_backlog()

  Previous releases - always broken:

   - eth: amd-xgbe: SFP fixes and compatibility improvements

  Misc:

   - docs: netdev: offer performance feedback to contributors"

* tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
  net-memcg: avoid stalls when under memory pressure
  tcp: fix indefinite deferral of RTO with SACK reneging
  tcp: fix a signed-integer-overflow bug in tcp_add_backlog()
  net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY
  net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed
  docs: netdev: offer performance feedback to contributors
  kcm: annotate data-races around kcm->rx_wait
  kcm: annotate data-races around kcm->rx_psock
  net: fman: Use physical address for userspace interfaces
  net/mlx5e: Cleanup MACsec uninitialization routine
  atlantic: fix deadlock at aq_nic_stop
  nfp: only clean `sp_indiff` when application firmware is unloaded
  amd-xgbe: add the bit rate quirk for Molex cables
  amd-xgbe: fix the SFP compliance codes check for DAC cables
  amd-xgbe: enable PLL_CTL for fixed PHY modes only
  amd-xgbe: use enums for mailbox cmd and sub_cmds
  amd-xgbe: Yellow carp devices do not need rrc
  bpf: Use __llist_del_all() whenever possbile during memory draining
  bpf: Wait for busy refill_work when destroying bpf memory allocator
  MAINTAINERS: add keyword match on PTP
  ...

Merge tag 'rcu-urgent.2022.10.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU fix from Paul McKenney:
 "Fix a regression caused by commit bf95b2bc ("rcu: Switch polled
  grace-period APIs to ->gp_seq_polled"), which could incorrectly leave
  interrupts enabled after an early-boot call to synchronize_rcu().

  Such synchronize_rcu() calls must acquire leaf rcu_node locks in order
  to properly interact with polled grace periods, but the code did not
  take into account the possibility of synchronize_rcu() being invoked
  from the portion of the boot sequence during which interrupts are
  disabled.

  This commit therefore switches the lock acquisition and release from
  irq to irqsave/irqrestore"

* tag 'rcu-urgent.2022.10.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu: Keep synchronize_rcu() from enabling irqs in early boot

Merge tag 'linux-kselftest-kunit-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit fixes from Shuah Khan:
 "One single fix to update alloc_string_stream() callers to check for
  IS_ERR() instead of NULL to be in sync with alloc_string_stream()
  returning an ERR_PTR()"

* tag 'linux-kselftest-kunit-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: update NULL vs IS_ERR() tests

Merge tag 'linux-kselftest-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:

 - futex, intel_pstate, kexec build fixes

 - ftrace dynamic_events dependency check fix

 - memory-hotplug fix to remove redundant warning from test report

* tag 'linux-kselftest-fixes-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftrace: fix dynamic_events dependency check
  selftests/memory-hotplug: Remove the redundant warning information
  selftests/kexec: fix build for ARCH=x86_64
  selftests/intel_pstate: fix build for ARCH=x86_64
  selftests/futex: fix build for clang

Pull pin control fixes from Linus Walleij:

 - Fix typos in UART1 and MMC in the Ingenic driver

 - A really well researched glitch bug fix to the Qualcomm driver that
   was tracked down and fixed by Dough Anderson from Chromium. Hats off
   for this one!

 - Revert two patches on the Xilinx ZynqMP driver: this needs a proper
   solution making use of firmware version information to adapt to
   different firmware releases

 - Fix interrupt triggers in the Ocelot driver

* tag 'pinctrl-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: ocelot: Fix incorrect trigger of the interrupt.
  Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration"
  Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and bias-high-impedance"
  pinctrl: qcom: Avoid glitching lines when we first mux to output
  pinctrl: Ingenic: JZ4755 bug fixes

As Shakeel explains the commit under Fixes had the unintended
side-effect of no longer pre-loading the cached memory allowance.
Even tho we previously dropped the first packet received when
over memory limit - the consecutive ones would get thru by using
the cache. The charging was happening in batches of 128kB, so
we'd let in 128kB (truesize) worth of packets per one drop.

After the change we no longer force charge, there will be no
cache filling side effects. This causes significant drops and
connection stalls for workloads which use a lot of page cache,
since we can't reclaim page cache under GFP_NOWAIT.

Some of the latency can be recovered by improving SACK reneg
handling but nowhere near enough to get back to the pre-5.15
performance (the application I'm experimenting with still
sees 5-10x worst latency).

Apply the suggested workaround of using GFP_ATOMIC. We will now
be more permissive than previously as we'll drop _no_ packets
in softirq when under pressure. But I can't think of any good
and simple way to address that within networking.

Link: https://lore.kernel.org/all/20221012163300.795e7b86@kernel.org/Suggested-by: Shakeel Butt <shakeelb@google.com>
Fixes: 4b1327be ("net-memcg: pass in gfp_t mask to mem_cgroup_charge_skmem()")
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20221021160304.1362511-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This commit fixes a bug that can cause a TCP data sender to repeatedly
defer RTOs when encountering SACK reneging.

The bug is that when we're in fast recovery in a scenario with SACK
reneging, every time we get an ACK we call tcp_check_sack_reneging()
and it can note the apparent SACK reneging and rearm the RTO timer for
srtt/2 into the future. In some SACK reneging scenarios that can
happen repeatedly until the receive window fills up, at which point
the sender can't send any more, the ACKs stop arriving, and the RTO
fires at srtt/2 after the last ACK. But that can take far too long
(O(10 secs)), since the connection is stuck in fast recovery with a
low cwnd that cannot grow beyond ssthresh, even if more bandwidth is
available.

This fix changes the logic in tcp_check_sack_reneging() to only rearm
the RTO timer if data is cumulatively ACKed, indicating forward
progress. This avoids this kind of nearly infinite loop of RTO timer
re-arming. In addition, this meets the goals of
tcp_check_sack_reneging() in handling Windows TCP behavior that looks
temporarily like SACK reneging but is not really.

Many thanks to Jakub Kicinski and Neil Spring, who reported this issue
and provided critical packet traces that enabled root-causing this
issue. Also, many thanks to Jakub Kicinski for testing this fix.

Fixes: 5ae344c9 ("tcp: reduce spurious retransmits due to transient SACK reneging")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Neil Spring <ntspring@fb.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20221021170821.1093930-1-ncardwell.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexei Starovoitov says:

====================
pull-request: bpf 2022-10-23

We've added 7 non-merge commits during the last 18 day(s) which contain
a total of 8 files changed, 69 insertions(+), 5 deletions(-).

The main changes are:

1) Wait for busy refill_work when destroying bpf memory allocator, from Hou.

2) Allow bpf_user_ringbuf_drain() callbacks to return 1, from David.

3) Fix dispatcher patchable function entry to 5 bytes nop, from Jiri.

4) Prevent decl_tag from being referenced in func_proto, from Stanislav.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Use __llist_del_all() whenever possbile during memory draining
  bpf: Wait for busy refill_work when destroying bpf memory allocator
  bpf: Fix dispatcher patchable function entry to 5 bytes nop
  bpf: prevent decl_tag from being referenced in func_proto
  selftests/bpf: Add reproducer for decl_tag in func_proto return type
  selftests/bpf: Make bpf_user_ringbuf_drain() selftest callback return 1
  bpf: Allow bpf_user_ringbuf_drain() callbacks to return 1
====================

Link: https://lore.kernel.org/r/20221023192244.81137-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Vadim Fedorenko says:

====================
ptp: ocp: add support for Orolia ART-CARD

Orolia company created alternative open source TimeCard. The hardware of
the card provides similar to OCP's card functions, that's why the support
is added to current driver.

The first patch in the series changes the way to store information about
serial ports and is more like preparation.

The patches 2 to 4 introduces actual hardware support.

The last patch removes fallback from devlink flashing interface to protect
against flashing wrong image. This became actual now as we have 2 different
boards supported and wrong image can ruin hardware easily.

v2:
  Address comments from Jonathan Lemon

v3:
  Fix issue reported by kernel test robot <lkp@intel.com>

v4:
  Fix clang build issue

v5:
  Fix warnings and per-patch build errors

v6:
  Fix more style issues
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously there was a fallback mode to flash firmware image without
proper header. But now we have different supported vendors and flashing
wrong image could destroy the hardware. Remove fallback mode and force
header check. Both vendors have published firmware images with headers.
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Orolia card has disciplining configuration and temperature table
stored in EEPROM. This patch exposes them as binary attributes to
have read and write access.
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Co-developed-by: Charles Parent <charles.parent@orolia2s.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ART card provides interface to access to serial port of miniature atomic
clock found on the card. Add support for this device and configure it
during init phase.
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Co-developed-by: Charles Parent <charles.parent@orolia2s.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This brings in the Orolia timecard support from the GitHub repository.
The card uses different drivers to provide access to i2c EEPROM and
firmware SPI flash. And it also has a bit different EEPROM map, but
other parts of the code are the same and could be reused.
Co-developed-by: Charles Parent <charles.parent@orolia2s.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Vadim Fedorenko <vadfed@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>