- 30 Apr, 2016 40 commits
-
-
Sergei Shtylyov authored
[ Upstream commit c1b7fca6 ] In a low memory situation, if netdev_alloc_skb() fails on a first RX ring loop iteration in sh_eth_ring_format(), 'rxdesc' is still NULL. Avoid kernel oops by adding the 'rxdesc' check after the loop. Reported-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Willem de Bruijn authored
[ Upstream commit ea47781c ] As variable length protocol, AX25 fails link layer header validation tests based on a minimum length. header_ops.validate allows protocols to validate headers that are shorter than hard_header_len. Implement this callback for AX25. See also http://comments.gmane.org/gmane.linux.network/401064Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 2793a23a ] Netdevice parameter hard_header_len is variously interpreted both as an upper and lower bound on link layer header length. The field is used as upper bound when reserving room at allocation, as lower bound when validating user input in PF_PACKET. Clarify the definition to be maximum header length. For validation of untrusted headers, add an optional validate member to header_ops. Allow bypassing of validation by passing CAP_SYS_RAWIO, for instance for deliberate testing of corrupt input. In this case, pad trailing bytes, as some device drivers expect completely initialized headers. See also http://comments.gmane.org/gmane.linux.network/401064Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 48906f62 ] Some devices will silently fail setup unless they are reset first. This is necessary even if the data interface is already in altsetting 0, which it will be when the device is probed for the first time. Briefly toggling the altsetting forces a function reset regardless of the initial state. This fixes a setup problem observed on a number of Huawei devices, appearing to operate in NTB-32 mode even if we explicitly set them to NTB-16 mode. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Xin Long authored
[ Upstream commit 40b4f0fd ] As the member .cmp_addr of sctp_af_inet6, sctp_v6_cmp_addr should also check the port of addresses, just like sctp_v4_cmp_addr, cause it's invoked by sctp_cmp_addr_exact(). Now sctp_v6_cmp_addr just check the port when two addresses have different family, and lack the port check for two ipv6 addresses. that will make sctp_hash_cmp() cannot work well. so fix it by adding ports comparison in sctp_v6_cmp_addr(). Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Diego Viola authored
[ Upstream commit ee50c130 ] The JMC260 network card fails to suspend/resume because the call to jme_start_irq() was too early, moving the call to jme_start_irq() after the call to jme_reset_link() makes it work. Prior this change suspend/resume would fail unless /sys/power/pm_async=0 was explicitly specified. Relevant bug report: https://bugzilla.kernel.org/show_bug.cgi?id=112351Signed-off-by:
Diego Viola <diego.viola@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit ff1cab37 upstream. The BSP team noticed that there is spin/mutex lock issue on sh-sci when CPUFREQ is used. The issue is that the notifier function may call mutex_lock() while the spinlock is held, which can lead to a BUG(). This may happen if CPUFREQ is changed while another CPU calls clk_get_rate(). Taking the spinlock was added to the notifier function in commit e552de24 ("sh-sci: add platform device private data"), to protect the list of serial ports against modification during traversal. At that time the Common Clock Framework didn't exist yet, and clk_get_rate() just returned clk->rate without taking a mutex. Note that since commit d535a230 ("serial: sh-sci: Require a device per port mapping."), there's no longer a list of serial ports to traverse, and taking the spinlock became superfluous. To fix the issue, just remove the cpufreq notifier: 1. The notifier doesn't work correctly: all it does is update the stored clock rate; it does not update the divider in the hardware. The divider will only be updated when calling sci_set_termios(). I believe this was broken back in 2004, when the old drivers/char/sh-sci.c driver (where the notifier did update the divider) was replaced by drivers/serial/sh-sci.c (where the notifier just updated port->uartclk). Cfr. full-history-linux commits 6f8deaef2e9675d9 ("[PATCH] sh: port sh-sci driver to the new API") and 3f73fe878dc9210a ("[PATCH] Remove old sh-sci driver"). 2. On modern SoCs, the sh-sci parent clock rate is no longer related to the CPU clock rate anyway, so using a cpufreq notifier is futile. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Hannes Reinecke authored
commit 2d99b55d upstream. Commit 35dc2483 introduced a check for current->mm to see if we have a user space context and only copies data if we do. Now if an IO gets interrupted by a signal data isn't copied into user space any more (as we don't have a user space context) but user space isn't notified about it. This patch modifies the behaviour to return -EINTR from bio_uncopy_user() to notify userland that a signal has interrupted the syscall, otherwise it could lead to a situation where the caller may get a buffer with no data returned. This can be reproduced by issuing SG_IO ioctl()s in one thread while constantly sending signals to it. Fixes: 35dc2483 [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Jens Axboe <axboe@fb.com> [bwh: Backported to 3.2: - Adjust filename - Put the assignment in the existing 'else' block] Signed-off-by:
-
Neil Horman authored
[ Upstream commit d9749fb5 ] Dmitry Vyukov noted recently that the sctp_port_hashtable had an error in its size computation, observing that the current method never guaranteed that the hashsize (measured in number of entries) would be a power of two, which the input hash function for that table requires. The root cause of the problem is that two values need to be computed (one, the allocation order of the storage requries, as passed to __get_free_pages, and two the number of entries for the hash table). Both need to be ^2, but for different reasons, and the existing code is simply computing one order value, and using it as the basis for both, which is wrong (i.e. it assumes that ((1<<order)*PAGE_SIZE)/sizeof(bucket) is still ^2 when its not). To fix this, we change the logic slightly. We start by computing a goal allocation order (which is limited by the maximum size hash table we want to support. Then we attempt to allocate that size table, decreasing the order until a successful allocation is made. Then, with the resultant successful order we compute the number of buckets that hash table supports, which we then round down to the nearest power of two, giving us the number of entries the table actually supports. I've tested this locally here, using non-debug and spinlock-debug kernels, and the number of entries in the hashtable consistently work out to be powers of two in all cases. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> CC: Dmitry Vyukov <dvyukov@google.com> CC: Vladislav Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 29e73269 ] Drop reference on the relay_po socket when __pppoe_xmit() succeeds. This is already handled correctly in the error path. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 91948309 ] Dmitry reported memory leaks of IP options allocated in ip_cmsg_send() when/if this function returns an error. Callers are responsible for the freeing. Many thanks to Dmitry for the report and diagnostic. Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 8013d1d7 ] Commit 6fd99094 ("ipv6: Don't reduce hop limit for an interface") disabled accept hop limit from RA if it is smaller than the current hop limit for security stuff. But this behavior kind of break the RFC definition. RFC 4861, 6.3.4. Processing Received Router Advertisements A Router Advertisement field (e.g., Cur Hop Limit, Reachable Time, and Retrans Timer) may contain a value denoting that it is unspecified. In such cases, the parameter should be ignored and the host should continue using whatever value it is already using. If the received Cur Hop Limit value is non-zero, the host SHOULD set its CurHopLimit variable to the received value. So add sysctl option accept_ra_min_hop_limit to let user choose the minimum hop limit value they can accept from RA. And set default to 1 to meet RFC standards. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 1cdda918 ] Currently, the egress interface index specified via IPV6_PKTINFO is ignored by __ip6_datagram_connect(), so that RFC 3542 section 6.7 can be subverted when the user space application calls connect() before sendmsg(). Fix it by initializing properly flowi6_oif in connect() before performing the route lookup. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Manfred Rudigier authored
[ Upstream commit 81e8f2e9 ] PHY status frames are not reliable, the PHY may not be able to send them during heavy receive traffic. This overflow condition is signaled by the PHY in the next status frame, but the driver did not make use of it. Instead it always reported wrong tx timestamps to user space after an overflow happened because it assigned newly received tx timestamps to old packets in the queue. This commit fixes this issue by clearing the tx timestamp queue every time an overflow happens, so that no timestamps are delivered for overflow packets. This way time stamping will continue correctly after an overflow. Signed-off-by:
Manfred Rudigier <manfred.rudigier@omicron.at> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Ursula Braun authored
[ Upstream commit 52a82e23 ] Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Reported-by:
Evgeny Cherkashin <Eugene.Crosser@ru.ibm.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 34ae6a1a ] When a tunnel decapsulates the outer header, it has to comply with RFC 6080 and eventually propagate CE mark into inner header. It turns out IP6_ECN_set_ce() does not correctly update skb->csum for CHECKSUM_COMPLETE packets, triggering infamous "hw csum failure" messages and stack traces. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7aaed57c ] Ivaylo Dimitrov reported a regression caused by commit 7866a621 ("dev: add per net_device packet type chains"). skb->dev becomes NULL and we crash in __netif_receive_skb_core(). Before above commit, different kind of bugs or corruptions could happen without major crash. But the root cause is that phonet_rcv() can queue skb without checking if skb is shared or not. Many thanks to Ivaylo Dimitrov for his help, diagnosis and tests. Reported-by:
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by:
-
Neal Cardwell authored
[ Upstream commit 83d15e70 ] For tcp_yeah, use an ssthresh floor of 2, the same floor used by Reno and CUBIC, per RFC 5681 (equation 4). tcp_yeah_ssthresh() was sometimes returning a 0 or negative ssthresh value if the intended reduction is as big or bigger than the current cwnd. Congestion control modules should never return a zero or negative ssthresh. A zero ssthresh generally results in a zero cwnd, causing the connection to stall. A negative ssthresh value will be interpreted as a u32 and will set a target cwnd for PRR near 4 billion. Oleksandr Natalenko reported that a system using tcp_yeah with ECN could see a warning about a prior_cwnd of 0 in tcp_cwnd_reduction(). Testing verified that this was due to tcp_yeah_ssthresh() misbehaving in this way. Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit ff621985 ] [I stole this patch from Eric Biederman. He wrote:] > There is no defined mechanism to pass network namespace information > into /sbin/bridge-stp therefore don't even try to invoke it except > for bridge devices in the initial network namespace. > > It is possible for unprivileged users to cause /sbin/bridge-stp to be > invoked for any network device name which if /sbin/bridge-stp does not > guard against unreasonable arguments or being invoked twice on the > same network device could cause problems. [Hannes: changed patch using netns_eq] Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 55285bf0 ] Dmitry reports memleak with syskaller program. Problem is that connector bumps skb usecount but might not invoke callback. So move skb_get to where we invoke the callback. Reported-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Xin Long authored
[ Upstream commit 068d8bd3 ] In sctp_close, sctp_make_abort_user may return NULL because of memory allocation failure. If this happens, it will bypass any state change and never free the assoc. The assoc has no chance to be freed and it will be kept in memory with the state it had even after the socket is closed by sctp_close(). So if sctp_make_abort_user fails to allocate memory, we should abort the asoc via sctp_primitive_ABORT as well. Just like the annotation in sctp_sf_cookie_wait_prm_abort and sctp_sf_do_9_1_prm_abort said, "Even if we can't send the ABORT due to low memory delete the TCB. This is a departure from our typical NOMEM handling". But then the chunk is NULL (low memory) and the SCTP_CMD_REPLY cmd would dereference the chunk pointer, and system crash. So we should add SCTP_CMD_REPLY cmd only when the chunk is not NULL, just like other places where it adds SCTP_CMD_REPLY cmd. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Eryu Guan authored
commit 5e1021f2 upstream. ext4_reserve_inode_write() in ext4_mark_inode_dirty() could fail on error (e.g. EIO) and iloc.bh can be NULL in this case. But the error is ignored in the following "if" condition and ext4_expand_extra_isize() might be called with NULL iloc.bh set, which triggers NULL pointer dereference. This is uncovered by commit 8b4953e1 ("ext4: reserve code points for the project quota feature"), which enlarges the ext4_inode size, and run the following script on new kernel but with old mke2fs: #/bin/bash mnt=/mnt/ext4 devname=ext4-error dev=/dev/mapper/$devname fsimg=/home/fs.img trap cleanup 0 1 2 3 9 15 cleanup() { umount $mnt >/dev/null 2>&1 dmsetup remove $devname losetup -d $backend_dev rm -f $fsimg exit 0 } rm -f $fsimg fallocate -l 1g $fsimg backend_dev=`losetup -f --show $fsimg` devsize=`blockdev --getsz $backend_dev` good_tab="0 $devsize linear $backend_dev 0" error_tab="0 $devsize error $backend_dev 0" dmsetup create $devname --table "$good_tab" mkfs -t ext4 $dev mount -t ext4 -o errors=continue,strictatime $dev $mnt dmsetup load $devname --table "$error_tab" && dmsetup resume $devname echo 3 > /proc/sys/vm/drop_caches ls -l $mnt exit 0 [ Patch changed to simplify the function a tiny bit. -- Ted ] Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
David S. Miller authored
commit fbd40ea0 upstream. When an inetdev is destroyed, every address assigned to the interface is removed. And in this scenerio we do two pointless things which can be very expensive if the number of assigned interfaces is large: 1) Address promotion. We are deleting all addresses, so there is no point in doing this. 2) A full nf conntrack table purge for every address. We only need to do this once, as is already caught by the existing masq_dev_notifier so masq_inet_event() can skip this. Reported-by:
Solar Designer <solar@openwall.com> Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by:
-
Ignat Korchagin authored
commit b348d7dd upstream. Fix potential out-of-bounds write to urb->transfer_buffer usbip handles network communication directly in the kernel. When receiving a packet from its peer, usbip code parses headers according to protocol. As part of this parsing urb->actual_length is filled. Since the input for urb->actual_length comes from the network, it should be treated as untrusted. Any entity controlling the network may put any value in the input and the preallocated urb->transfer_buffer may not be large enough to hold the data. Thus, the malicious entity is able to write arbitrary data to kernel memory. Signed-off-by:
Ignat Korchagin <ignat.korchagin@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by:
-
Oliver Neukum authored
commit 1666984c upstream. In case bind() works, but a later error forces bailing in probe() in error cases work and a timer may be scheduled. They must be killed. This fixes an error case related to the double free reported in http://www.spinics.net/lists/netdev/msg367669.html and needs to go on top of Linus' fix to cdc-ncm. Signed-off-by:
Oliver Neukum <ONeukum@suse.com> Signed-off-by:
-
Hector Marco-Gisbert authored
commit 8b8addf8 upstream. Currently on i386 and on X86_64 when emulating X86_32 in legacy mode, only the stack and the executable are randomized but not other mmapped files (libraries, vDSO, etc.). This patch enables randomization for the libraries, vDSO and mmap requests on i386 and in X86_32 in legacy mode. By default on i386 there are 8 bits for the randomization of the libraries, vDSO and mmaps which only uses 1MB of VA. This patch preserves the original randomness, using 1MB of VA out of 3GB or 4GB. We think that 1MB out of 3GB is not a big cost for having the ASLR. The first obvious security benefit is that all objects are randomized (not only the stack and the executable) in legacy mode which highly increases the ASLR effectiveness, otherwise the attackers may use these non-randomized areas. But also sensitive setuid/setgid applications are more secure because currently, attackers can disable the randomization of these applications by setting the ulimit stack to "unlimited". This is a very old and widely known trick to disable the ASLR in i386 which has been allowed for too long. Another trick used to disable the ASLR was to set the ADDR_NO_RANDOMIZE personality flag, but fortunately this doesn't work on setuid/setgid applications because there is security checks which clear Security-relevant flags. This patch always randomizes the mmap_legacy_base address, removing the possibility to disable the ASLR by setting the stack to "unlimited". Signed-off-by:
Hector Marco-Gisbert <hecmargi@upv.es> Acked-by:
Ismael Ripoll Ripoll <iripoll@upv.es> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/1457639460-5242-1-git-send-email-hecmargi@upv.esSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kees Cook authored
commit 82168140 upstream. In preparation for splitting out ET_DYN ASLR, this refactors the use of mmap_rnd() to be used similarly to arm, and extracts the checking of PF_RANDOMIZE. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Florian Westphal authored
commit 6e94e0cf upstream. Otherwise this function may read data beyond the ruleset blob. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Florian Westphal authored
commit bdf533de upstream. We should check that e->target_offset is sane before mark_source_chains gets called since it will fetch the target entry for loop detection. Signed-off-by:
-
Helge Deller authored
commit 2ef4dfd9 upstream. Handling exceptions from modules never worked on parisc. It was just masked by the fact that exceptions from modules don't happen during normal use. When a module triggers an exception in get_user() we need to load the main kernel dp value before accessing the exception_data structure, and afterwards restore the original dp value of the module on exit. Noticed-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Helge Deller <deller@gmx.de> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Helge Deller authored
commit ef72f311 upstream. The kernel module testcase (lib/test_user_copy.c) exhibited a kernel crash on parisc if the parameters for copy_from_user were reversed ("illegal reversed copy_to_user" testcase). Fix this potential crash by checking the fault handler if the faulting address is in the exception table. Signed-off-by:
-
Helge Deller authored
commit e3893027 upstream. We want to avoid the kernel module loader to create function pointers for the kernel fixup routines of get_user() and put_user(). Changing the external reference from function type to int type fixes this. This unbreaks exception handling for get_user() and put_user() when called from a kernel module. Signed-off-by:
-
Martyn Welch authored
commit cddc9434 upstream. The CP2105 is used in the GE Healthcare Remote Alarm Box, with the Manufacturer ID of 0x1901 and Product ID of 0x0194. Signed-off-by:
Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Josh Boyer authored
commit ea6db90e upstream. A Fedora user reports that the ftdi_sio driver works properly for the ICP DAS I-7561U device. Further, the user manual for these devices instructs users to load the driver and add the ids using the sysfs interface. Add support for these in the driver directly so that the devices work out of the box instead of needing manual configuration. Reported-by: <thesource@mail.ru> Signed-off-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
-
Boris Ostrovsky authored
commit ff1e22e7 upstream. Moving an unmasked irq may result in irq handler being invoked on both source and target CPUs. With 2-level this can happen as follows: On source CPU: evtchn_2l_handle_events() -> generic_handle_irq() -> handle_edge_irq() -> eoi_pirq(): irq_move_irq(data); /***** WE ARE HERE *****/ if (VALID_EVTCHN(evtchn)) clear_evtchn(evtchn); If at this moment target processor is handling an unrelated event in evtchn_2l_handle_events()'s loop it may pick up our event since target's cpu_evtchn_mask claims that this event belongs to it *and* the event is unmasked and still pending. At the same time, source CPU will continue executing its own handle_edge_irq(). With FIFO interrupt the scenario is similar: irq_move_irq() may result in a EVTCHNOP_unmask hypercall which, in turn, may make the event pending on the target CPU. We can avoid this situation by moving and clearing the event while keeping event masked. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> [bwh: Backported to 3.2: - Adjust filename - Add a suitable definition of test_and_set_mask()] Signed-off-by:
-
Takashi Iwai authored
commit 4a07083e upstream. ALSA system timer backend stops the timer via del_timer() without sync and leaves del_timer_sync() at the close instead. This is because of the restriction by the design of ALSA timer: namely, the stop callback may be called from the timer handler, and calling the sync shall lead to a hangup. However, this also triggers a kernel BUG() when the timer is rearmed immediately after stopping without sync: kernel BUG at kernel/time/timer.c:966! Call Trace: <IRQ> [<ffffffff8239c94e>] snd_timer_s_start+0x13e/0x1a0 [<ffffffff8239e1f4>] snd_timer_interrupt+0x504/0xec0 [<ffffffff8122fca0>] ? debug_check_no_locks_freed+0x290/0x290 [<ffffffff8239ec64>] snd_timer_s_function+0xb4/0x120 [<ffffffff81296b72>] call_timer_fn+0x162/0x520 [<ffffffff81296add>] ? call_timer_fn+0xcd/0x520 [<ffffffff8239ebb0>] ? snd_timer_interrupt+0xec0/0xec0 .... It's the place where add_timer() checks the pending timer. It's clear that this may happen after the immediate restart without sync in our cases. So, the workaround here is just to use mod_timer() instead of add_timer(). This looks like a band-aid fix, but it's a right move, as snd_timer_interrupt() takes care of the continuous rearm of timer. Reported-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Yuki Shibuya authored
commit 321c5658 upstream. Non maskable interrupts (NMI) are preferred to interrupts in current implementation. If a NMI is pending and NMI is blocked by the result of nmi_allowed(), pending interrupt is not injected and enable_irq_window() is not executed, even if interrupts injection is allowed. In old kernel (e.g. 2.6.32), schedule() is often called in NMI context. In this case, interrupts are needed to execute iret that intends end of NMI. The flag of blocking new NMI is not cleared until the guest execute the iret, and interrupts are blocked by pending NMI. Due to this, iret can't be invoked in the guest, and the guest is starved until block is cleared by some events (e.g. canceling injection). This patch injects pending interrupts, when it's allowed, even if NMI is blocked. And, If an interrupts is pending after executing inject_pending_event(), enable_irq_window() is executed regardless of NMI pending counter. Signed-off-by:
Yuki Shibuya <shibuya.yk@ncos.nec.co.jp> Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Martin K. Petersen authored
commit f08bb1e0 upstream. During revalidate we check whether device capacity has changed before we decide whether to output disk information or not. The check for old capacity failed to take into account that we scaled sdkp->capacity based on the reported logical block size. And therefore the capacity test would always fail for devices with sectors bigger than 512 bytes and we would print several copies of the same discovery information. Avoid scaling sdkp->capacity and instead adjust the value on the fly when setting the block device capacity and generating fake C/H/S geometry. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Reported-by:
Ewan Milne <emilne@redhat.com> Signed-off-by:
-
Oliver Neukum authored
commit 5a07975a upstream. The driver can be crashed with devices that expose crafted descriptors with too few endpoints. See: http://seclists.org/bugtraq/2016/Mar/61Signed-off-by:
-
Oliver Neukum authored
commit c55aee1b upstream. An attack using missing endpoints exists. CVE-2016-3137 Signed-off-by:
-
