- 16 Feb, 2010 4 commits
-
-
Thomas Gleixner authored
Conflicts: kernel/sched.c Necessary due to the urgent fixes which conflict with the code move from sched.c to sched_fair.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Peter Zijlstra authored
Thomas found that due to ttwu() changing a task's cpu without holding the rq->lock, task_rq_lock() might end up locking the wrong rq. Avoid this by serializing against TASK_WAKING. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1266241712.15770.420.camel@laptop> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Suresh Siddha authored
Fix a SMT scheduler performance regression that is leading to a scenario where SMT threads in one core are completely idle while both the SMT threads in another core (on the same socket) are busy. This is caused by this commit (with the problematic code highlighted) commit bdb94aa5 Author: Peter Zijlstra <a.p.zijlstra@chello.nl> Date: Tue Sep 1 10:34:38 2009 +0200 sched: Try to deal with low capacity @@ -4203,15 +4223,18 @@ find_busiest_queue() ... for_each_cpu(i, sched_group_cpus(group)) { + unsigned long power = power_of(i); ... - wl = weighted_cpuload(i); + wl = weighted_cpuload(i) * SCHED_LOAD_SCALE; + wl /= power; - if (rq->nr_running == 1 && wl > imbalance) + if (capacity && rq->nr_running == 1 && wl > imbalance) continue; On a SMT system, power of the HT logical cpu will be 589 and the scheduler load imbalance (for scenarios like the one mentioned above) can be approximately 1024 (SCHED_LOAD_SCALE). The above change of scaling the weighted load with the power will result in "wl > imbalance" and ultimately resulting in find_busiest_queue() return NULL, causing load_balance() to think that the load is well balanced. But infact one of the tasks can be moved to the idle core for optimal performance. We don't need to use the weighted load (wl) scaled by the cpu power to compare with imabalance. In that condition, we already know there is only a single task "rq->nr_running == 1" and the comparison between imbalance, wl is to make sure that we select the correct priority thread which matches imbalance. So we really need to compare the imabalnce with the original weighted load of the cpu and not the scaled load. But in other conditions where we want the most hammered(busiest) cpu, we can use scaled load to ensure that we consider the cpu power in addition to the actual load on that cpu, so that we can move the load away from the guy that is getting most hammered with respect to the actual capacity, as compared with the rest of the cpu's in that busiest group. Fix it. Reported-by: Ma Ling <ling.ma@intel.com> Initial-Analysis-by: Zhang, Yanmin <yanmin_zhang@linux.intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1266023662.2808.118.camel@sbs-t61.sc.intel.com> Cc: stable@kernel.org [2.6.32.x] Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Vaidyanathan Srinivasan authored
Fix for sched_mc_powersavigs for pre-Nehalem platforms. Child sched domain should clear SD_PREFER_SIBLING if parent will have SD_POWERSAVINGS_BALANCE because they are contradicting. Sets the flags correctly based on sched_mc_power_savings. Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100208100555.GD2931@dirshya.in.ibm.com> Cc: stable@kernel.org [2.6.32.x] Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
- 09 Feb, 2010 1 commit
-
-
Anton Blanchard authored
kthread_create_on_cpu doesn't exist so update a comment in kthread.c to reflect this. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100209040740.GB3702@kryten> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 08 Feb, 2010 4 commits
-
-
Anton Blanchard authored
When CONFIG_VIRT_CPU_ACCOUNTING and CONFIG_CGROUP_CPUACCT are enabled we can call cpuacct_update_stats with values much larger than percpu_counter_batch. This means the call to percpu_counter_add will always add to the global count which is protected by a spinlock and we end up with a global spinlock in the scheduler. Based on an idea by KOSAKI Motohiro, this patch scales the batch value by cputime_one_jiffy such that we have the same batch limit as we would if CONFIG_VIRT_CPU_ACCOUNTING was disabled. His patch did this once at boot but that initialisation happened too early on PowerPC (before time_init) and it was never updated at runtime as a result of a hotplug cpu add/remove. This patch instead scales percpu_counter_batch by cputime_one_jiffy at runtime, which keeps the batch correct even after cpu hotplug operations. We cap it at INT_MAX in case of overflow. For architectures that do not support CONFIG_VIRT_CPU_ACCOUNTING, cputime_one_jiffy is the constant 1 and gcc is smart enough to optimise min(s32 percpu_counter_batch, INT_MAX) to just percpu_counter_batch at least on x86 and PowerPC. So there is no need to add an #ifdef. On a 64 thread PowerPC box with CONFIG_VIRT_CPU_ACCOUNTING and CONFIG_CGROUP_CPUACCT enabled, a context switch microbenchmark is 234x faster and almost matches a CONFIG_CGROUP_CPUACCT disabled kernel: CONFIG_CGROUP_CPUACCT disabled: 16906698 ctx switches/sec CONFIG_CGROUP_CPUACCT enabled: 61720 ctx switches/sec CONFIG_CGROUP_CPUACCT + patch: 16663217 ctx switches/sec Tested with: wget http://ozlabs.org/~anton/junkcode/context_switch.c make context_switch for i in `seq 0 63`; do taskset -c $i ./context_switch & done vmstat 1 Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Anton Blanchard authored
Even though batch isn't used on UP, we may want to pass one in to keep the SMP and UP code paths similar. Convert __percpu_counter_add to an inline function so we wont get variable unused warnings if we do. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Merge reason: Merge dependent fix, update to latest -rc. Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Andrew Morton authored
On UP: kernel/sched.c: In function 'wake_up_new_task': kernel/sched.c:2631: warning: unused variable 'cpu' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 06 Feb, 2010 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (w83781d) Request I/O ports individually for probing hwmon: (lm78) Request I/O ports individually for probing hwmon: (adt7462) Wrong ADT7462_VOLT_COUNT
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Fix leak of relocs along do_execbuffer error path drm/i915: slow acpi_lid_open() causes flickering - V2 drm/i915: Disable SR when more than one pipe is enabled drm/i915: page flip support for Ironlake drm/i915: Fix the incorrect DMI string for Samsung SX20S laptop drm/i915: Add support for SDVO composite TV drm/i915: don't trigger ironlake vblank interrupt at irq install drm/i915: handle non-flip pending case when unpinning the scanout buffer drm/i915: Fix the device info of Pineview drm/i915: enable vblank interrupt on ironlake drm/i915: Prevent use of uninitialized pointers along error path. drm/i915: disable hotplug detect before Ironlake CRT detect
-
Linus Torvalds authored
We incorrectly depended on the 'node_state/node_isset()' functions testing the node range, rather than checking it explicitly. That's not reliable, even if it might often happen to work. So do the proper explicit test. Reported-by: Marcus Meissner <meissner@suse.de> Acked-and-tested-by: Brice Goglin <Brice.Goglin@inria.fr> Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 05 Feb, 2010 27 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: pandora: Add APLL supply to fix audio output ALSA: ice1724 - aureon - fix wm8770 volume offset ALSA: cosmetic: make hda intel interrupt name consistent with others ALSA: hda - Delay switching to polling mode if an interrupt was missing ALSA: ctxfi - fix PTP address initialization
-
Jean Delvare authored
Different motherboards have different PNP declarations for W83781D/W83782D chips. Some declare the whole range of I/O ports (8 ports), some declare only the useful ports (2 ports at offset 5) and some declare fancy ranges, for example 4 ports at offset 4. To properly handle all cases, request all ports individually for probing. After we have determined that we really have a W83781D or W83782D chip, the useful port range will be requested again, as a single block. I did not see a board which needs this yet, but I know of one for lm78 driver and I'd like to keep the logic of these two drivers in sync. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
-
Jean Delvare authored
Different motherboards have different PNP declarations for LM78/LM79 chips. Some declare the whole range of I/O ports (8 ports), some declare only the useful ports (2 ports at offset 5) and some declare fancy ranges, for example 4 ports at offset 4. To properly handle all cases, request all ports individually for probing. After we have determined that we really have an LM78 or LM79 chip, the useful port range will be requested again, as a single block. This fixes the driver on the Olivetti M3000 DT 540, at least. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
-
Ray Copeland authored
The #define ADT7462_VOLT_COUNT is wrong, it should be 13 not 12. All the for loops that use this as a limit count are of the typical form, "for (n = 0; n < ADT7462_VOLT_COUNT; n++)", so to loop through all voltages w/o missing the last one it is necessary for the count to be one greater than it is. (Specifically, you will miss the +1.5V 3GPIO input with count = 12 vs. 13.) Signed-off-by: Ray Copeland <ray.copeland@aprius.com> Acked-by: "Darrick J. Wong" <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Takashi Iwai authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] Call flush_dcache_page after PIO data transfers in libata-sff.c ahci: add Acer G725 to broken suspend list libata: fix ata_id_logical_per_physical_sectors libata-scsi passthru: fix bug which truncated LBA48 return values
-
Andres Salomon authored
The new cs5535-* drivers use PCI header config info rather than MSRs to determine the memory region to use for things like GPIOs and MFGPTs. As anticipated, we've run into a buggy BIOS: [ 0.081818] pci 0000:00:14.0: reg 10: [io 0x6000-0x7fff] [ 0.081906] pci 0000:00:14.0: reg 14: [io 0x6100-0x61ff] [ 0.082015] pci 0000:00:14.0: reg 18: [io 0x6200-0x63ff] [ 0.082917] pci 0000:00:14.2: reg 20: [io 0xe000-0xe00f] [ 0.083551] pci 0000:00:15.0: reg 10: [mem 0xa0010000-0xa0010fff] [ 0.084436] pci 0000:00:15.1: reg 10: [mem 0xa0011000-0xa0011fff] [ 0.088816] PCI: pci_cache_line_size set to 32 bytes [ 0.088938] pci 0000:00:14.0: address space collision: [io 0x6100-0x61ff] already in use [ 0.089052] pci 0000:00:14.0: can't reserve [io 0x6100-0x61ff] This is a Soekris board, and its BIOS sets the size of the PCI ISA bridge device's BAR0 to 8k. In reality, it should be 8 bytes (BAR0 is used for SMBus stuff). This quirk checks for an incorrect size, and resets it accordingly. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Tested-by: Leigh Porter <leigh@leighporter.org> Tested-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Rothwell authored
This is to make the annotation of percpu variables during the next merge window less painfull. Extracted from a patch by Rusty Russell. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: fix r300 vram width calculations drm/radeon/kms: rs400/480 MC setup is different than r300. drm/radeon/kms: make initial state of load detect property correct. drm/radeon/kms: disable HDMI audio for now on rv710/rv730 drm/radeon/kms: don't call suspend path before cleaning up GPU drivers/gpu/drm/radeon/radeon_combios.c: fix warning ati_pcigart: fix printk format warning drm/r100/kms: Emit cache flush to the end of command buffer. (v2) drm/radeon/kms: fix regression rendering issue on R6XX/R7XX drm/radeon/kms: move blit initialization after we disabled VGA
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: apply updated fallocate i_size fix Btrfs: do not try and lookup the file extent when finishing ordered io Btrfs: Fix oopsen when dropping empty tree. Btrfs: remove BUG_ON() due to mounting bad filesystem Btrfs: make error return negative in btrfs_sync_file() Btrfs: fix race between allocate and release extent buffer.
-
Grazvydas Ignotas authored
Pandora's external DAC is using 256*Fs output from the TWL4030 codec, and TWL4030 needs to have APLL enabled for it's 256*Fs output to function. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Jaroslav Kysela authored
The volume register is from 0..0x7f and 0..0x1a range is mute. Also, fix mute combining in wm_vol_put(). The wrong behaviour was noticed by Peter Christensen. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Maxim Levitsky authored
This renames the interrupt name in /proc/interrupt. HDA Intel -> hda_intel This also eliminates space from the name, probably helping some parsers. Don't think anybody depends on this name in userspace Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Maxim Levitsky authored
My sound codec seems sometimes (very rarely) to omit interrupts (ALC268) However, interrupt mode still works. Thus if we get timeout, poll the codec once. If we get 3 such polls in a row, then switch to polling mode. This patch is maybe an bandaid, but this might be a workaround for hardware bug. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Dave Airlie authored
This was incorrect according to the docs and the UMS driver does it like this. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Boot testing on my rs480 laptop found the MC idle never happened on startup, a quick check with AMD found the idle bit is in a different place on the rs4xx than r300. Implement a new rs400 mc idle function to fix this. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
this was incorrect on my rs480. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Support isn't correct yet and we are getting green tinges on the displays. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
In suspend path we unmap the GART table while in cleaning up path we will unbind buffer and thus try to write to unmapped GART leading to oops. In order to avoid this we don't call the suspend path in cleanup path. Cleanup path is clever enough to desactive GPU like the suspend path is doing, thus this was redondant. Tested on: RV370, R420, RV515, RV570, RV610, RV770 (all PCIE) Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Andrew Morton authored
drivers/gpu/drm/radeon/radeon_combios.c: In function 'radeon_combios_get_lvds_info': drivers/gpu/drm/radeon/radeon_combios.c:893: warning: comparison is always false due to limited range of data type Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Randy Dunlap authored
Fix ati_pcigart printk format warning: drivers/gpu/drm/ati_pcigart.c:115: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'dma_addr_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Pauli Nieminen authored
Cache flush is required in case CPU is accessing rendered data. This fixes glean/readPixSanity test case and random rendering errors in sauerbraten and warzone2100. v2 Fix comment ordering in r100_fence_ring_emit and remove extra defines added in first version. Signed-off-by: Pauli Nieminen <suokkos@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
It seems that some R6XX/R7XX silently ignore HDP flush when programmed through ring, this patch addback an ioctl callback to allow R6XX/R7XX hw to perform such flush through MMIO in order to fix a regression. For more details see: http://bugzilla.kernel.org/show_bug.cgi?id=15186Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
VGA might be overwritting VRAM and corrupt our blit shader leading to corruption, it likely won't happen if you load fbcon right after radeon. Thanks to Shawn Starr and Andre Maasikas for tracking down this issue. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Fix wrong register in proc-arm6_7.S data abort handler ARM: 5909/1: ARM: Correct the FPSCR bits setting when raising exceptions ARM: 5904/1: ARM: Always generate the IT instruction when compiling for Thumb-2 ARM: 5907/1: ARM: Fix the reset on the RealView PBX Development board mx35: add a missing comma in a pad definition mx25: make the FEC AHB clk secondary of the IPG mx25: fix time accounting mx25: properly initialize clocks mx25: remove unused mx25_clocks_init() argument i.MX25: implement secondary clocks for uarts and fec i.MX25: Allow secondary clocks in DEFINE_CLOCK ARM: MX3: Fixed typo in declared enum type name. MXC: Add AUDMUXv2 register decode to debugfs mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module mx31ads: Provide a name for EXPIO interrupt chip mx31ads: Allow enable/disable of switchable supplies
-