Commits · 6e48ebffc2db5419b3a51cfc509bde442252b356 · Kirill Smelkov / linux

13 Sep, 2023 2 commits

wifi: mac80211: fix mesh id corruption on 32 bit systems · 6e48ebff

Felix Fietkau authored Sep 13, 2023

Since the changed field size was increased to u64, mesh_bss_info_changed
pulls invalid bits from the first 3 bytes of the mesh id, clears them, and
passes them on to ieee80211_link_info_change_notify, because
ifmsh->mbss_changed was not updated to match its size.
Fix this by turning into ifmsh->mbss_changed into an unsigned long array with
64 bit size.

Fixes: 15ddba5f ("wifi: mac80211: consistently use u64 for BSS changes")
Reported-by: Thomas Hühn <thomas.huehn@hs-nordhausen.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230913050134.53536-1-nbd@nbd.nameSigned-off-by: Johannes Berg <johannes.berg@intel.com>

6e48ebff

wifi: cfg80211: add missing kernel-doc for cqm_rssi_work · d1383077

Johannes Berg authored Sep 13, 2023

As reported by Stephen, I neglected to add the kernel-doc
for the new struct member. Fix that.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 37c20b2e ("wifi: cfg80211: fix cqm_config access race")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

d1383077

11 Sep, 2023 7 commits

wifi: cfg80211: fix cqm_config access race · 37c20b2e

Johannes Berg authored Aug 16, 2023

Max Schulze reports crashes with brcmfmac. The reason seems
to be a race between userspace removing the CQM config and
the driver calling cfg80211_cqm_rssi_notify(), where if the
data is freed while cfg80211_cqm_rssi_notify() runs it will
crash since it assumes wdev->cqm_config is set. This can't
be fixed with a simple non-NULL check since there's nothing
we can do for locking easily, so use RCU instead to protect
the pointer, but that requires pulling the updates out into
an asynchronous worker so they can sleep and call back into
the driver.

Since we need to change the free anyway, also change it to
go back to the old settings if changing the settings fails.
Reported-and-tested-by: Max Schulze <max.schulze@online.de>
Closes: https://lore.kernel.org/r/ac96309a-8d8d-4435-36e6-6d152eb31876@online.de
Fixes: 4a4b8169 ("cfg80211: Accept multiple RSSI thresholds for CQM")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

37c20b2e

wifi: iwlwifi: mvm: Fix a memory corruption issue · 8ba438ef

Christophe JAILLET authored Jul 23, 2023

A few lines above, space is kzalloc()'ed for:
	sizeof(struct iwl_nvm_data) +
	sizeof(struct ieee80211_channel) +
	sizeof(struct ieee80211_rate)

'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is fine.

At the end of this structure, there is the 'channels' flex array.
Each element is of type 'struct ieee80211_channel'.
So only 1 element is allocated in this array.

When doing:
  mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels;
We point at the first element of the 'channels' flex array.
So this is fine.

However, when doing:
  mvm->nvm_data->bands[0].bitrates =
			(void *)((u8 *)mvm->nvm_data->channels + 1);
because of the "(u8 *)" cast, we add only 1 to the address of the beginning
of the flex array.

It is likely that we want point at the 'struct ieee80211_rate' allocated
just after.

Remove the spurious casting so that the pointer arithmetic works as
expected.

Fixes: 8ca151b5 ("iwlwifi: add the MVM driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/23f0ec986ef1529055f4f93dcb3940a6cf8d9a94.1690143750.git.christophe.jaillet@wanadoo.frSigned-off-by: Johannes Berg <johannes.berg@intel.com>

8ba438ef

wifi: iwlwifi: Ensure ack flag is properly cleared. · e8fbe99e

Ben Greear authored Aug 08, 2023

Debugging indicates that nothing else is clearing the info->flags,
so some frames were flagged as ACKed when they should not be.
Explicitly clear the ack flag to ensure this does not happen.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230808205605.4105670-1-greearb@candelatech.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

e8fbe99e

wifi: iwlwifi: dbg_ini: fix structure packing · 424c82e8

Arnd Bergmann authored Jun 16, 2023

The iwl_fw_ini_error_dump_range structure has conflicting alignment
requirements for the inner union and the outer struct:

In file included from drivers/net/wireless/intel/iwlwifi/fw/dbg.c:9:
drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2: error: field within 'struct iwl_fw_ini_error_dump_range' is less aligned than 'union iwl_fw_ini_error_dump_range::(anonymous at drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2)' and is usually due to 'struct iwl_fw_ini_error_dump_range' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
union {

As the original intention was apparently to make the entire structure
unaligned, mark the innermost members the same way so the union
becomes packed as well.

Fixes: 97319355 ("iwlwifi: dbg_ini: dump headers cleanup")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616090343.2454061-1-arnd@kernel.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

424c82e8

iwlwifi: mvm: handle PS changes in vif_cfg_changed · 2d4caa1d

Gregory Greenman authored Sep 05, 2023

Handling of BSS_CHANGED_PS was missing in vif_cfg_changed
callback. Fix it.

Fixes: 22c58834 ("wifi: iwlwifi: mvm: replace bss_info_changed() with vif_cfg/link_info_changed()")
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230905162939.5ef0c8230de6.Ieed265014988c50ec68fbff6d33821e4215f987f@changeid
[note: patch looks bigger than it is due to reindentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

2d4caa1d

wifi: cfg80211: validate AP phy operation before starting it · 5112fa50

Aditya Kumar Singh authored Sep 05, 2023

Many regulatories can have HE/EHT Operation as not permitted. In such
cases, AP should not be allowed to start if it is using a channel
having the no operation flag set. However, currently there is no such
check in place.

Fix this issue by validating such IEs sent during start AP against the
channel flags.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230905064857.1503-1-quic_adisi@quicinc.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

5112fa50

wifi: cfg80211/mac80211: hold link BSSes when assoc fails for MLO connection · 234249d8

Wen Gong authored Aug 25, 2023

When connect to MLO AP with more than one link, and the assoc response of
AP is not success, then cfg80211_unhold_bss() is not called for all the
links' cfg80211_bss except the primary link which means the link used by
the latest successful association request. Thus the hold value of the
cfg80211_bss is not reset to 0 after the assoc fail, and then the
__cfg80211_unlink_bss() will not be called for the cfg80211_bss by
__cfg80211_bss_expire().

Then the AP always looks exist even the AP is shutdown or reconfigured
to another type, then it will lead error while connecting it again.

The detail info are as below.

When connect with muti-links AP, cfg80211_hold_bss() is called by
cfg80211_mlme_assoc() for each cfg80211_bss of all the links. When
assoc response from AP is not success(such as status_code==1), the
ieee80211_link_data of non-primary link(sdata->link[link_id]) is NULL
because ieee80211_assoc_success()->ieee80211_vif_update_links() is
not called for the links.

Then struct cfg80211_rx_assoc_resp resp in cfg80211_rx_assoc_resp() and
struct cfg80211_connect_resp_params cr in __cfg80211_connect_result()
will only have the data of the primary link, and finally function
cfg80211_connect_result_release_bsses() only call cfg80211_unhold_bss()
for the primary link. Then cfg80211_bss of the other links will never free
because its hold is always > 0 now.

Hence assign value for the bss and status from assoc_data since it is
valid for this case. Also assign value of addr from assoc_data when the
link is NULL because the addrs of assoc_data and link both represent the
local link addr and they are same value for success connection.

Fixes: 81151ce4 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230825070055.28164-1-quic_wgong@quicinc.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

234249d8

04 Sep, 2023 10 commits

wifi: mwifiex: Sanity check tlv_len and tlv_bitmap_len · d5a93b7d

Gustavo A. R. Silva authored Aug 24, 2023

Add sanity checks for both `tlv_len` and `tlv_bitmap_len` before
decoding data from `event_buf`.

This prevents any malicious or buggy firmware from overflowing
`event_buf` through large values for `tlv_len` and `tlv_bitmap_len`.
Suggested-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/d4f8780527d551552ee96f17a0229e02e1c200d1.1692931954.git.gustavoars@kernel.org

d5a93b7d

wifi: mwifiex: Replace one-element array with flexible-array member in struct... · c7847241

Gustavo A. R. Silva authored Aug 24, 2023

wifi: mwifiex: Replace one-element array with flexible-array member in struct mwifiex_ie_types_rxba_sync

One-element and zero-length arrays are deprecated. So, replace
one-element array in struct mwifiex_ie_types_rxba_sync with
flexible-array member, and refactor the rest of the code, accordingly.

This results in no differences in binary output.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/79c801c69c8beece2f80502c60166036d3c047cc.1692931954.git.gustavoars@kernel.org

c7847241

wifi: mwifiex: Fix tlv_buf_left calculation · eec679e4

Gustavo A. R. Silva authored Aug 24, 2023

In a TLV encoding scheme, the Length part represents the length after
the header containing the values for type and length. In this case,
`tlv_len` should be:

tlv_len == (sizeof(*tlv_rxba) - 1) - sizeof(tlv_rxba->header) + tlv_bitmap_len

Notice that the `- 1` accounts for the one-element array `bitmap`, which
1-byte size is already included in `sizeof(*tlv_rxba)`.

So, if the above is correct, there is a double-counting of some members
in `struct mwifiex_ie_types_rxba_sync`, when `tlv_buf_left` and `tmp`
are calculated:

968                 tlv_buf_left -= (sizeof(*tlv_rxba) + tlv_len);
969                 tmp = (u8 *)tlv_rxba + tlv_len + sizeof(*tlv_rxba);

in specific, members:

drivers/net/wireless/marvell/mwifiex/fw.h:777
 777         u8 mac[ETH_ALEN];
 778         u8 tid;
 779         u8 reserved;
 780         __le16 seq_num;
 781         __le16 bitmap_len;

This is clearly wrong, and affects the subsequent decoding of data in
`event_buf` through `tlv_rxba`:

970                 tlv_rxba = (struct mwifiex_ie_types_rxba_sync *)tmp;

Fix this by using `sizeof(tlv_rxba->header)` instead of `sizeof(*tlv_rxba)`
in the calculation of `tlv_buf_left` and `tmp`.

This results in the following binary differences before/after changes:

| drivers/net/wireless/marvell/mwifiex/11n_rxreorder.o
| @@ -4698,11 +4698,11 @@
|  drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c:968
|                 tlv_buf_left -= (sizeof(tlv_rxba->header) + tlv_len);
| -    1da7:      lea    -0x11(%rbx),%edx
| +    1da7:      lea    -0x4(%rbx),%edx
|      1daa:      movzwl %bp,%eax
|  drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c:969
|                 tmp = (u8 *)tlv_rxba  + sizeof(tlv_rxba->header) + tlv_len;
| -    1dad:      lea    0x11(%r15,%rbp,1),%r15
| +    1dad:      lea    0x4(%r15,%rbp,1),%r15

The above reflects the desired change: avoid counting 13 too many bytes;
which is the total size of the double-counted members in
`struct mwifiex_ie_types_rxba_sync`:

$ pahole -C mwifiex_ie_types_rxba_sync drivers/net/wireless/marvell/mwifiex/11n_rxreorder.o
struct mwifiex_ie_types_rxba_sync {
	struct mwifiex_ie_types_header header;           /*     0     4 */

     |-----------------------------------------------------------------------
     |  u8                         mac[6];               /*     4     6 */  |
     |	u8                         tid;                  /*    10     1 */  |
     |  u8                         reserved;             /*    11     1 */  |
     | 	__le16                     seq_num;              /*    12     2 */  |
     | 	__le16                     bitmap_len;           /*    14     2 */  |
     |  u8                         bitmap[1];            /*    16     1 */  |
     |----------------------------------------------------------------------|
								  | 13 bytes|
								  -----------

	/* size: 17, cachelines: 1, members: 7 */
	/* last cacheline: 17 bytes */
} __attribute__((__packed__));

Fixes: 99ffe72c ("mwifiex: process rxba_sync event")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/06668edd68e7a26bbfeebd1201ae077a2a7a8bce.1692931954.git.gustavoars@kernel.org

eec679e4

MAINTAINERS: wifi: ath12k: add wiki link · af5ff4b7

Jeff Johnson authored Aug 29, 2023

The ath12k wireless driver now has a wiki, so advertise it.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230829-ath12kwiki-v1-1-df37127527a1@quicinc.com

af5ff4b7