- 20 Mar, 2019 18 commits
-
-
Andy Shevchenko authored
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Ville Syrjälä authored
skl_update_pipe_wm() is quite pointless now. Just inline it into skl_compute_wm(). v2: s/skl_build_pipe_wm/skl_update_pipe_wm/ in the commit message (Matt) Cc: Neel Desai <neel.desai@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190312205844.6339-10-ville.syrjala@linux.intel.comReviewed-by:
Matt Roper <matthew.d.roper@intel.com>
-
Ville Syrjälä authored
{skl,icl}_build_plane_wm() don't need to be passed the pipe_wm, so don't. And skl_build_pipe_wm() can easily dig it out itself. Cc: Neel Desai <neel.desai@intel.com> Signed-off-by: -
Ville Syrjälä authored
Clean up skl_allocate_pipe_ddb() a bit by moving the 'wm' variable to tighter scope. We'll also consitify it where appropriate. Also initialize plane_alloc/uv_plane_alloc when decrlaring them rather than later. v2: Update commit message (Matt) Cc: Neel Desai <neel.desai@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Currently we disable all the watermarks above the selected max level for every plane. That would mean that the cursor's watermarks may also get modified when another plane causes the selected max watermark level to change. That is not so great as we would like to keep the cursor as indepenedent as possible to avoid having to throttle it in resposne to other plane activity. To avoid that let's keep the watermarks enabled even for levels above the max selected watermark level, iff the plane has enough ddb for that particular level. This way the cursor's enabled watermarks only depend on the cursor itself. This is safe because the hardware will never choose to use a watermark level unless all enabled planes have also enabled that level. Cc: Neel Desai <neel.desai@intel.com> Signed-off-by:
-
Ville Syrjälä authored
We use a fixed ddb allocation for the cursor. Now the calculation actually makes sure we have enough ddb space, but let's double check anyway. Cc: Neel Desai <neel.desai@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Currently we just assume that 32 or 8 blocks of ddb is sufficient for the cursor. The 32 might be, but the 8 is certainly not. The minimum we need is at least what level 0 watermarks need, but that is a bit restrictive, so instead let's calculate what level 7 would need for a 256x256 cursor. We'll use that to determine the fixed ddb allocation for the cursor. This way the cursor will never be responsible for missing out on deeper power saving states. v2: Loop to make sure this works even if some wm levels are totally disabled (latency==0) Cc: Neel Desai <neel.desai@intel.com> Signed-off-by: -
Ville Syrjälä authored
Extract the meat of skl_compute_plane_wm_params() into a lower level helper that doesn't depend on the plane state. We'll reuse this for the cursor ddb allocation calculations. Cc: Neel Desai <neel.desai@intel.com> Signed-off-by:
-
Ville Syrjälä authored
skl_compute_plane_wm() doesn't actually need the plane state. While it would make logically sense to pass it, we shall need to reuse skl_compute_plane_wm() to compute the minimum ddb allocation for the cursor before the cursor may be enabled. Thus we can't rely on the plane state. The alternative would be to duplicate a lot of the wm calculations for the cursor ddb allocation case, which doens't appeal to me. Cc: Neel Desai <neel.desai@intel.com> Signed-off-by:
-
Ville Syrjälä authored
If the minimum required ddb space for all the planes equals the total ddb space available we are allowed to use the relevant watermark level. Cc: Neel Desai <neel.desai@intel.com> Signed-off-by:
-
Ville Syrjälä authored
To allow unsetting .is_mobile for the desktop variant of PNV fix up the cdclk code to select the mobile HPLLVCO register for both PNV variants. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Ville Syrjälä authored
We want to allow the desktop PNV to not have .is_mobile set. To that end let's add a small helper to determine if the platform has the ASLE interrupt (or equivalent). Supposdely both PNV variants have it. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Add a small helper to determine if we have the panel power sequencer or not. We'll make PNV an exceptional case so that we can unset .is_mobile for the desktop variant. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Make the code self-documenting by introducing i9xx_has_pfit(). Also make PNV an exceptional case so that we can unset .is_mobile for the desktop variant. v2: s/gen4/gen>=4/ (Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
g33/i964g/g45 are the exceptional cases when it comes to the swizzle detection. Let's reorder the code to handle them first and let everything else be handled by the else branch. This allows us to unset .is_mobile for the desktop PNV variant (which supposedly must follow the "mobile" path here). Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
Exercise acquiring and releasing forcewake around register reads. In order to read a register behind a GT powerwell, we need to instruct that powerwell to wake up using a forcewake. When we no longer require the GT powerwell, we tell the GT to release our forcewake. Inside the forcewake, the register read should work but outside it should just return garbage, 0 being the most common garbage. Thus we can detect when we are inside and outside of the forcewake with just a simple register read, and so can verify that the GT powerwell is released when we say so. v2: Picking the right forcewaked register to return 0 outside of forcewake is an art. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
-
Chris Wilson authored
If a test fails, we quite often mark the device as wedged. Provide the stub functions so that we can wedge the mock device, and avoid exploding on test failures. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109981Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190319214233.25498-3-chris@chris-wilson.co.uk
-
Joonas Lahtinen authored
Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 19 Mar, 2019 22 commits
-
-
Anusha Srivatsa authored
Comet Lake PCH is based off of Cannon Point(CNP). Add PCI ID for Comet Lake PCH. v2: Code cleanup (DK) v3: Comment cleanup (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190318200133.9666-2-anusha.srivatsa@intel.com
-
Anusha Srivatsa authored
Comet Lake is a Intel Processor containing Gen9 Intel HD Graphics. This patch adds the initial set of PCI IDs. Comet Lake comes off of Coffee Lake - adding the IDs to Coffee Lake ID list. More support and features will be in the patches that follow. v2: Split IDs according to GT. (Rodrigo) v3: Update IDs. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
José Roberto de Souza authored
There is probably a issue in DMC firmwares(icl_dmc_ver1_07.bin and kbl_dmc_ver1_04.bin at least) that causes PSR2 SU to fail after exiting DC6 if EDP_PSR_TP1_TP3_SEL is kept in PSR_CTL, so for now lets workaround the issue by cleaning PSR_CTL before enable PSR2. v2: - Updated commit description and comment to state that it may be a DMC firmware issue (Rodrigo) - No need to RMW, let's write 0 to PSR_CTL(Dhinakaran) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190314230113.6571-1-jose.souza@intel.com
-
Ville Syrjälä authored
Make things look a bit nicer by passing dev_priv to intel_is_dual_link_lvds(). Signed-off-by:
-
Ville Syrjälä authored
Pass dev_priv to intel_get_lvds_encoder() and polish the implementation a bit. Signed-off-by:
-
Ville Syrjälä authored
Sprinkle some curly braces in accordance with the coding style. Signed-off-by:
-
Ville Syrjälä authored
Rather than try to maintain some magic relationship between the link rates and the index into the wrpll params array let's just store the link rate in the array itself. Much less fragile. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com>
-
Ville Syrjälä authored
We already have the code to calculate the WRPLL output clock from the register values, but for some reason we're only using it for HDMI and not DP. Throw out the inflexible DP DPLL table lookup and just call the HDMI code which decodes the actual register values. Signed-off-by:
-
Ville Syrjälä authored
The readout code thinks that kdiv of 3 is 4. Fix it. Signed-off-by:
-
Ville Syrjälä authored
Just store the stuff directly into crtc_state->dpll_hw_state rather than to a temp and copying the whole thing over. Signed-off-by:
-
Ville Syrjälä authored
Simplify the calling convention of the dpll funcs by plumbing the crtc state deeper. Signed-off-by:
-
Ville Syrjälä authored
Just store the stuff directly into crtc_state->dpll_hw_state rather than to a temp and copying the whole thing over. Signed-off-by:
-
Ville Syrjälä authored
Simplify the calling convention of the dpll funcs by plumbing the crtc state deeper. Signed-off-by:
-
Ville Syrjälä authored
Just store the stuff directly into crtc_state->dpll_hw_state rather than to a temp and copying the whole thing over. Signed-off-by:
-
Ville Syrjälä authored
Simplify the calling convention of the dpll funcs by plumbing the crtc state deeper. Signed-off-by:
-
Ville Syrjälä authored
Just store the stuff directly into crtc_state->dpll_hw_state rather than to a temp and copying the whole thing over. Signed-off-by:
-
Ville Syrjälä authored
Simplify the calling convention of the skl dpll funcs by plumbing the crtc state deeper. Signed-off-by:
-
Ville Syrjälä authored
Passing both crtc and its state is redundant. Pass just the state. Signed-off-by:
-
Ville Syrjälä authored
Passing both crtc and its state is redundant. Pass just the state. Signed-off-by:
-
Chris Wilson authored
For virtual engines, we need to keep the HW context alive while it remains in use. For regular HW contexts, they are created and kept alive until the end of the GEM context. For simplicity, generalise the requirements and keep an active reference to each HW context. Signed-off-by:
-
Chris Wilson authored
On unpinning the intel_context, we remove it from the active list inside the GEM context. This list is supposed to be guarded by the GEM context mutex, so remember to take it! Fixes: 7e3d9a59 ("drm/i915: Track active engines within a context") Signed-off-by:
-
Jani Nikula authored
We've been free of deprecated drmP.h includes for a while, but one crept in. Fend it off. Cc: José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190318160409.27648-1-jani.nikula@intel.com
-
