- 10 Dec, 2014 2 commits
-
-
Jiri Pirko authored
To cancel nesting, this function is more convenient. Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
The disable_irq_nosync function, not the disable_irq function, must be used to disable the DMA channel interrupt from within the interrupt service routine. Change the disable_irq call to disable_irq_nosync. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
- 09 Dec, 2014 38 commits
-
-
Nimrod Andy authored
On i.MX6SX sabreauto board, when there have no phy daughter board connection, there have kernel crash by NULL pointer: fec 2188000.ethernet eth0: could not attach to PHY Unable to handle kernel NULL pointer dereference at virtual address 00000220 pgd = 80004000 [00000220] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.24-01042-g27eaeea-dirty #405 task: d8078000 ti: d8076000 task.ti: d8076000 PC is at mutex_lock+0x10/0x54 LR is at phy_start+0x14/0x68 pc : [<806ad4e4>] lr : [<803b0f90>] psr: 60000113 sp : d8077d80 ip : 00000000 fp : d83cc000 r10: 0000100c r9 : d83cc800 r8 : 00000000 r7 : d83bcd0c r6 : 00000200 r5 : 00000220 r4 : 00000220 r3 : 00000000 r2 : 00000000 r1 : d83bcd90 r0 : 00000220 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 8000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xd8076240) Stack: (0xd8077d80 to 0xd8078000) 7d80: 00000000 803b0f90 00000001 00000000 d83bc800 803be034 00000007 805c3fb4 7da0: 00000003 80d4e0bc 805efcb8 fffffff1 fffffff0 00000000 00000000 d8077dfc 7dc0: 0000000d 80d6ce80 80d126b0 800499c8 d83bc800 d83bc800 806f0f40 d83bc82c 7de0: 00000000 00000000 80d6ce80 80d126b0 0000016b 80540250 d8076008 d83bc800 7e00: 0000016b d83bc800 00001003 00000001 00001002 805404d4 d83bc800 00000120 7e20: 00001002 00001002 00000000 805405d4 d83bc800 00000001 80d126c0 00001002 7e40: 80dbc5dc 80d02024 00000000 806ae360 00000002 d6128420 d6127198 12400000 7e60: 00000000 00000000 00000002 d61271e8 00000000 12400000 d801674c 800e49f0 7e80: d6127198 d6124e58 00000000 80238848 d61271c4 00000000 00000001 d8016700 7ea0: 80dd2e00 80d752c0 80d752c0 80cfdaec 0000010c 80239430 806c2e90 d800f080 7ec0: d800f380 804e46b4 ffffffbc 80d15cb0 00000007 80d752c0 80d752c0 80d01e94 7ee0: 0000010c d8076030 00000000 800088cc 80dbaba4 80bd411c d80a6f00 806b1e04 7f00: 00000000 00000000 00000000 80125b84 00000000 80d2c56c 60000113 00000001 7f20: ef7ff9df 806c80cc 0000010c 80043f5c 80c95eb8 00000007 ef7ffa1d 00000007 7f40: 80d2c55c 80d15cb0 00000007 80d752c0 80d752c0 80ccc50c 0000010c 80d0a114 7f60: 80d0a10c 80cccc04 00000007 00000007 80ccc50c 806ae410 00000000 8004cb84 7f80: 80d17bc0 00000000 806a4bd4 00000000 00000000 00000000 00000000 00000000 7fa0: 00000000 806a4bdc 00000000 8000e5f8 00000000 00000000 00000000 00000000 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 1e79a7bb e5337f77 [<806ad4e4>] (mutex_lock) from [<803b0f90>] (phy_start+0x14/0x68) [<803b0f90>] (phy_start) from [<803be034>] (fec_enet_open+0x448/0x5dc) [<803be034>] (fec_enet_open) from [<80540250>] (__dev_open+0xa8/0x110) [<80540250>] (__dev_open) from [<805404d4>] (__dev_change_flags+0x88/0x170) [<805404d4>] (__dev_change_flags) from [<805405d4>] (dev_change_flags+0x18/0x48) [<805405d4>] (dev_change_flags) from [<80d02024>] (ip_auto_config+0x190/0xf94) [<80d02024>] (ip_auto_config) from [<800088cc>] (do_one_initcall+0xe8/0x144) [<800088cc>] (do_one_initcall) from [<80cccc04>] (kernel_init_freeable+0x104/0x1c8) [<80cccc04>] (kernel_init_freeable) from [<806a4bdc>] (kernel_init+0x8/0xec) [<806a4bdc>] (kernel_init) from [<8000e5f8>] (ret_from_fork+0x14/0x3c) Code: e92d4010 e3a03000 e1a04000 ee073fba (e1903f9f) Add phydev check to fix the issue. Signed-off-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
-
Ying Xue authored
The commit fb9962f3 ("tipc: ensure all name sequences are properly protected with its lock") involves below errors: net/tipc/name_table.c:980 tipc_purge_publications() error: double lock 'spin_lock:&seq->lock' Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Florian Fainelli authored
Hook a ndo_set_mac_address callback, update the internal Ethernet MAC in the netdevice structure, and finally write that address down to the UniMAC registers. If the interface is down, and most likely clock gated, we do not update the registers but just the local copy, such that next ndo_open() call will effectively write down the address. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Roopa Prabhu says: ==================== remove bridge mode BRIDGE_MODE_SWDEV BRIDGE_MODE_SWDEV was introduced to indicate switchdev offloads for bridging from user space (In other words to call into the hw switch port driver directly). But user can use existing BRIDGE_FLAGS_SELF to call into the hw switch port driver today. swdev mode is not required anymore. So, this patch removes it. v4 - v5 incorporate comments - Define BRIDGE_MODE_UNDEF to handle cases where mode is not defined - reverse the order of patches - include patch comments in all patches ==================== Signed-off-by:Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Roopa Prabhu authored
This patch removes bridge mode swdev. Users can use BRIDGE_FLAGS_SELF to indicate swdev offload if needed. Signed-off-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
-
Roopa Prabhu authored
Remove use of 'swdev' mode in rocker. rocker dev offloads can use the BRIDGE_FLAGS_SELF to indicate offload to hardware. Signed-off-by:
-
Roopa Prabhu authored
This patch adds mode BRIDGE_MODE_UNDEF for cases where mode is not needed. Signed-off-by:
-
David S. Miller authored
Merge tag 'master-2014-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-12-08 Please pull this last batch of pending wireless updates for the 3.19 tree... For the wireless bits, Johannes says: "This time I have Felix's no-status rate control work, which will allow drivers to work better with rate control even if they don't have perfect status reporting. In addition to this, a small hwsim fix from Patrik, one of the regulatory patches from Arik, and a number of cleanups and fixes I did myself. Of note is a patch where I disable CFG80211_WEXT so that compatibility is no longer selectable - this is intended as a wake-up call for anyone who's still using it, and is still easily worked around (it's a one-line patch) before we fully remove the code as well in the future." For the Bluetooth bits, Johan says: "Here's one more bluetooth-next pull request for 3.19: - Minor cleanups for ieee802154 & mac802154 - Fix for the kernel warning with !TASK_RUNNING reported by Kirill A. Shutemov - Support for another ath3k device - Fix for tracking link key based security level - Device tree bindings for btmrvl + a state update fix - Fix for wrong ACL flags on LE links" And... "In addition to the previous one this contains two more cleanups to mac802154 as well as support for some new HCI features from the Bluetooth 4.2 specification. From the original request: 'Here's what should be the last bluetooth-next pull request for 3.19. It's rather large but the majority of it is the Low Energy Secure Connections feature that's part of the Bluetooth 4.2 specification. The specification went public only this week so we couldn't publish the corresponding code before that. The code itself can nevertheless be considered fairly mature as it's been in development for over 6 months and gone through several interoperability test events. Besides LE SC the pull request contains an important fix for command complete events for mgmt sockets which also fixes some leaks of hci_conn objects when powering off or unplugging Bluetooth adapters. A smaller feature that's part of the pull request is service discovery support. This is like normal device discovery except that devices not matching specific UUIDs or strong enough RSSI are filtered out. Other changes that the pull request contains are firmware dump support to the btmrvl driver, firmware download support for Broadcom BCM20702A0 variants, as well as some coding style cleanups in 6lowpan & ieee802154/mac802154 code.'" For the NFC bits, Samuel says: "With this one we get: - NFC digital improvements for DEP support: Chaining, NACK and ATN support added. - NCI improvements: Support for p2p target, SE IO operand addition, SE operands extensions to support proprietary implementations, and a few fixes. - NFC HCI improvements: OPEN_PIPE and NOTIFY_ALL_CLEARED support, and SE IO operand addition. - A bunch of minor improvements and fixes for STMicro st21nfcb and st21nfca" For the iwlwifi bits, Emmanuel says: "Major works are CSA and TDLS. On top of that I have a new firmware API for scan and a few rate control improvements. Johannes find a few tricks to improve our CPU utilization and adds support for a new spin of 7265 called 7265D. Along with this a few random things that don't stand out." And... "I deprecate here -8.ucode since -9 has been published long ago. Along with that I have a new activity, we have now better a infrastructure for firmware debugging. This will allow to have configurable probes insides the firmware. Luca continues his work on NetDetect, this feature is now complete. All the rest is minor fixes here and there." For the Atheros bits, Kalle says: "Only ath10k changes this time and no major changes. Most visible are: o new debugfs interface for runtime firmware debugging (Yanbo) o fix shared WEP (Sujith) o don't rebuild whenever kernel version changes (Johannes) o lots of refactoring to make it easier to add new hw support (Michal) There's also smaller fixes and improvements with no point of listing here." In addition, there are a few last minute updates to ath5k, ath9k, brcmfmac, brcmsmac, mwifiex, rt2x00, rtlwifi, and wil6210. Also included is a pull of the wireless tree to pick-up the fixes originally included in "pull request: wireless 2014-12-03"... Please let me know if there are problems! ==================== Signed-off-by:
-
Mitsuhiro Kimura authored
PTR_ALIGN macro after skb_reserve is redundant, because skb_reserve function adjusts the alignment of skb->data. Signed-off-by:
Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by:
-
Mitsuhiro Kimura authored
Both of 'boguscnt' and 'quota' have nearly meaning as the condition of the reception loop. In order to cut down redundant processing, this patch changes excess judgement. Signed-off-by:
-
Li RongQing authored
the queue length of sd->input_pkt_queue has been put into qlen, and impossible to change, since hold the lock Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-12-09 This series contains updates to i40e and i40evf. Jeff (me) provides a single patch to convert a macro to a static inline function based on feedback from Joe Perches on a previous patch. Shannon provides the remaining twelve patches against i40e. Almost all of Shannon's patches cleanup/fix NVM issues varying in range from adding more detail to debug messages, to removing dead code, to fixing NVM state transitions after an error. Change the handy decoder interface for admin queue return code to help catch and properly report the condition as a useful errno rather than returning a misleading '0'. Added a range check to avoid any possible array index-out-of-bound issues. v2: - fixed up patch 05 in the series to use the ARRAY_SIZE() macro as suggested by Sergei Shtylyov - fix up patch 13 to remove unnecessary parens in the return statement as suggested by Sergei Shtylyov ==================== Signed-off-by: -
git://gitorious.org/linux-can/linux-can-nextDavid S. Miller authored
Marc Kleine-Budde says: ==================== pull-request: can-next 2014-12-07 this is a pull request of 8 patches for net-next/master. Andri Yngvason contributes 4 patches in which the CAN state change handling is consolidated and unified among the sja1000, mscan and flexcan driver. The three patches by Jeremiah Mahler fix spelling mistakes and eliminate the banner[] variable in various parts. And a patch by me that switches on sparse endianess checking by default. ==================== Signed-off-by: -
Eric Dumazet authored
Commit 95bd09eb ("tcp: TSO packets automatic sizing") tried to control TSO size, but did this at the wrong place (sendmsg() time) At sendmsg() time, we might have a pessimistic view of flow rate, and we end up building very small skbs (with 2 MSS per skb). This is bad because : - It sends small TSO packets even in Slow Start where rate quickly increases. - It tends to make socket write queue very big, increasing tcp_ack() processing time, but also increasing memory needs, not necessarily accounted for, as fast clones overhead is currently ignored. - Lower GRO efficiency and more ACK packets. Servers with a lot of small lived connections suffer from this. Lets instead fill skbs as much as possible (64KB of payload), but split them at xmit time, when we have a precise idea of the flow rate. skb split is actually quite efficient. Patch looks bigger than necessary, because TCP Small Queue decision now has to take place after the eventual split. As Neal suggested, introduce a new tcp_tso_autosize() helper, so that tcp_tso_should_defer() can be synchronized on same goal. Rename tp->xmit_size_goal_segs to tp->gso_segs, as this variable contains number of mss that we can put in GSO packet, and is not related to the autosizing goal anymore. Tested: 40 ms rtt link nstat >/dev/null netperf -H remote -l -2000000 -- -s 1000000 nstat | egrep "IpInReceives|IpOutRequests|TcpOutSegs|IpExtOutOctets" Before patch : Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/s 87380 2000000 2000000 0.36 44.22 IpInReceives 600 0.0 IpOutRequests 599 0.0 TcpOutSegs 1397 0.0 IpExtOutOctets 2033249 0.0 After patch : Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 2000000 2000000 0.36 44.27 IpInReceives 221 0.0 IpOutRequests 232 0.0 TcpOutSegs 1397 0.0 IpExtOutOctets 2013953 0.0 Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Julia Lawall authored
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by:
-
Julia Lawall authored
Replace a misspelled function name by %s and then __func__. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by:
-
Julia Lawall authored
Replace a misspelled function name by %s and then __func__. In the first case, the print is just dropped, because kmalloc itself does enough error reporting. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by:
-
Julia Lawall authored
The function name contains cleanup, not clean. This was done using Coccinelle, including the use of Levenshtein distance, as proposed by Rasmus Villemoes. Signed-off-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
-
Mahesh Bandewar authored
If device is already used as an ipvlan port then refuse to use it as a macvlan port at early stage of port creation. thost1:~# ip link add link eth0 ipvl0 type ipvlan thost1:~# echo $? 0 thost1:~# ip link add link eth0 mvl0 type macvlan RTNETLINK answers: Device or resource busy thost1:~# echo $? 2 thost1:~# Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Mahesh Bandewar authored
Move the port check [ipvlan_dev_master()] and device check [ipvlan_dev_slave()] functions to netdevice.h and rename them netif_is_ipvlan_port() and netif_is_ipvlan() resp. to be consistent with macvlan api naming. Signed-off-by:
-
Mahesh Bandewar authored
If a device is already a macvlan port then refuse to use it as an ipvlan port in the early stage of port creation. thost1:~# ip link add link eth0 mvl0 type macvlan thost1:~# echo $? 0 thost1:~# ip link add link eth0 ipvl0 type ipvlan RTNETLINK answers: Device or resource busy thost1:~# echo $? 2 thost1:~# Signed-off-by:
-
Mahesh Bandewar authored
Similar to a check for macvlan device, netif_is_macvlan(), add another function to check if a device is used as macvlan port. Signed-off-by:
-
Hannes Frederic Sowa authored
Since commit f8864972 ("ipv4: fix dst race in sk_dst_get()") DST_NOCACHE dst_entries get freed by RCU. So there is no need to get a reference on them when we are in rcu protected sections. Cc: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Reviewed-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
Flavio Leitner authored
The command 'ethtool -i' is useful to find details about the interface like the device driver being used. This was missing for dummy driver. Signed-off-by:
Flavio Leitner <fbl@redhat.com> Signed-off-by:
-
Rami Rosen authored
This patch fixes the erronous usage of an hexadecimal address in the example, by replacing it with a decimal address. Signed-off-by:
Rami Rosen <ramirose@gmail.com> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Jiri Benc authored
Respect what the caller passed to ovs_tunnel_get_egress_info. Fixes: 8f0aad6f ("openvswitch: Extend packet attribute for egress tunnel info") Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Michal Kubeček authored
Since commit fbe168ba ("net: generic dev_disable_lro() stacked device handling"), dev_disable_lro() zeroes NETIF_F_LRO feature flag first for a macvlan device and then for its lower device. As an attempt to set NETIF_F_LRO to zero is ignored, dev_disable_lro() issues a warning and taints kernel. Allowing NETIF_F_LRO to be set independently of the lower device consists of three parts: - add the flag to hw_features to allow toggling it - allow setting it to 0 even if lower device has the flag set - add the flag to MACVLAN_FEATURES to restore copying from lower device on macvlan creation Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Jeff Kirsher authored
Inline functions are preferred over macros when they can be used interchangeably. CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reported-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Shannon Nelson authored
Add a little more state context to an NVM update debug message. Change-ID: I512160259052bcdbe5bdf1adf403ab2bf7984970 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Acked-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Jim Young <jamesx.m.young@intel.com> Signed-off-by:
-
Shannon Nelson authored
Decoding the AQ return code is great except when the AQ send timed out and there's no return code set. This changes the handy decoder interface to help catch and properly report the condition as a useful errno rather than returning a misleading '0'. Change-ID: I07a1f94f921606da49ffac7837bcdc37cd8222eb Signed-off-by:
-
Shannon Nelson authored
Only poll on the NVM semaphore if there's time left on a previous reservation. Also, add a little more info to debug messages. Change-ID: I2439bf870b95a28b810dcb5cca1c06440463cf8a Signed-off-by:
-
Shannon Nelson authored
The state transitions after an error were not managed well, so these changes get us back to the INIT state or don't transition out of the INIT state after most errors. Change-ID: I90aa0e4e348dc4f58cbcdce9c5d4b7fd35981c6c Signed-off-by:
Michal Kosiarz <michal.kosiarz@intel.com> Tested-by:
-
Shannon Nelson authored
Don't bother trying to set a smaller timeout on the polling, just simplify the code and always use the max limit. Also, rename a variable for clarity and fix a comment. Change-ID: I0300c3562ccc4fd5fa3088f8ae52db0c1eb33af5 Signed-off-by:
-
Shannon Nelson authored
The nvm_semaphore_wait field is set but never used, so let's just get rid of it. Change-ID: I2107bd29b69f99b1a61d7591d087429527c9d8fa Signed-off-by:
-
Shannon Nelson authored
The adminq init is run after the EMPR that is triggered by the NVM update. The final write command will cause the reset and will want to wait for the ARQ event that signals the end of the update, but the reset precludes the event being sent. The state is probably already at INIT, but we set it so here anyway, and clear the release_on_done flag as well. Change-ID: Ie9d724a39e71f988741abc3d51b4cb198c7e0272 Signed-off-by:
Kamil Krawczyk <kamil.krawczyk@intel.com> Tested-by:
-
Shannon Nelson authored
Just to be sure, add a range check to avoid any possible array index-out-of-bound issues. CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Change-ID: I9323bee6732c2a47599816e1d6c6b3a1f8dcbf54 Signed-off-by:
-
Shannon Nelson authored
Rework the debug messages in the NVM update state machine so that we can turn them on and off dynamically rather than forcing a recompile/reload. These can now be turned on with something like: ethtool -s eth1 msglvl 0xf000008f and off with: ethtool -s eth1 msglvl 0xf000000f The high 0xf0000000 gets the driver's attention that we want to change the internal debug flags, and the 0x80 bit is the NVM debug. Change-ID: I5efb9039400304b29a0fd6ddea3f47bb362e6661 Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
-
