- 05 Oct, 2019 4 commits
-
-
Peter Mamonov authored
[ Upstream commit e47488b2 ] According to the DP83865 datasheet "the 10 Mbps HDX loopback can be disabled in the expanded memory register 0x1C0.1". The driver erroneously used bit 0 instead of bit 1. Fixes: 4621bf12 ("phy: Add file missed in previous commit.") Signed-off-by:
Peter Mamonov <pmamonov@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
[ Upstream commit ba56d8ce ] Fei Liu reported a crash when doing netperf on a topo of macsec dev over veth: [ 448.919128] refcount_t: underflow; use-after-free. [ 449.090460] Call trace: [ 449.092895] refcount_sub_and_test+0xb4/0xc0 [ 449.097155] tcp_wfree+0x2c/0x150 [ 449.100460] ip_rcv+0x1d4/0x3a8 [ 449.103591] __netif_receive_skb_core+0x554/0xae0 [ 449.108282] __netif_receive_skb+0x28/0x78 [ 449.112366] netif_receive_skb_internal+0x54/0x100 [ 449.117144] napi_gro_complete+0x70/0xc0 [ 449.121054] napi_gro_flush+0x6c/0x90 [ 449.124703] napi_complete_done+0x50/0x130 [ 449.128788] gro_cell_poll+0x8c/0xa8 [ 449.132351] net_rx_action+0x16c/0x3f8 [ 449.136088] __do_softirq+0x128/0x320 The issue was caused by skb's true_size changed without its sk's sk_wmem_alloc increased in tcp/skb_gro_receive(). Later when the skb is being freed and the skb's truesize is subtracted from its sk's sk_wmem_alloc in tcp_wfree(), underflow occurs. macsec is calling gro_cells_receive() to receive a packet, which actually requires skb->sk to be NULL. However when macsec dev is over veth, it's possible the skb->sk is still set if the skb was not unshared or expanded from the peer veth. ip_rcv() is calling skb_orphan() to drop the skb's sk for tproxy, but it is too late for macsec's calling gro_cells_receive(). So fix it by dropping the skb's sk earlier on rx path of macsec. Fixes: 5491e7c6 ("macsec: enable GRO and RPS on macsec devices") Reported-by:
Xiumei Mu <xmu@redhat.com> Reported-by:
Fei Liu <feliu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 3fe4b335 ] Endpoints with zero wMaxPacketSize are not usable for transferring data. Ignore such endpoints when looking for valid in, out and status pipes, to make the driver more robust against invalid and meaningless descriptors. The wMaxPacketSize of the out pipe is used as divisor. So this change fixes a divide-by-zero bug. Reported-by: syzbot+ce366e2b8296e25d84f5@syzkaller.appspotmail.com Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Uwe Kleine-König authored
[ Upstream commit 108639aac35eb57f1d0e8333f5fc8c7ff68df938 ] struct archdr is only big enough to hold the header of various types of arcnet packets. So to provide enough space to hold the data read from hardware provide a buffer large enough to hold a packet with maximal size. The problem was noticed by the stack protector which makes the kernel oops. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
-
- 01 Oct, 2019 36 commits
-
-
Greg Kroah-Hartman authored
-
Chao Yu authored
[ Upstream commit 10f966bb ] f2fs uses EFAULT as error number to indicate filesystem is corrupted all the time, but generic filesystems use EUCLEAN for such condition, we need to change to follow others. This patch adds two new macros as below to wrap more generic error code macros, and spread them in code. EFSBADCRC EBADMSG /* Bad CRC detected */ EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */ Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Chao Yu <yuchao0@huawei.com> Acked-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ka-Cheong Poon authored
[ Upstream commit 05733434 ] In rds_bind(), laddr_check is called without checking if it is NULL or not. And rs_transport should be reset if rds_add_bound() fails. Fixes: c5c1a030 ("net/rds: An rds_sock is added too early to the hash table") Reported-by: syzbot+fae39afd2101a17ec624@syzkaller.appspotmail.com Signed-off-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Ka-Cheong Poon authored
[ Upstream commit c5c1a030 ] In rds_bind(), an rds_sock is added to the RDS bind hash table before rs_transport is set. This means that the socket can be found by the receive code path when rs_transport is NULL. And the receive code path de-references rs_transport for congestion update check. This can cause a panic. An rds_sock should not be added to the bind hash table before all the needed fields are set. Reported-by: syzbot+4b4f8163c2e246df3c4c@syzkaller.appspotmail.com Signed-off-by:
-
Cong Wang authored
[ Upstream commit 8b142a00 ] At least sch_red and sch_tbf don't implement ->tcf_block() while still have a non-zero tc "class". Instead of adding nop implementations to each of such qdisc's, we can just relax the check of cops->tcf_block() in tc_bind_tclass(). They don't support TC filter anyway. Reported-by: syzbot+21b29db13c065852f64b@syzkaller.appspotmail.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Jian-Hong Pan authored
[ Upstream commit 6d0762b1 ] The ASUS X412FA laptop contains a Realtek RTL8822CE device with an associated BT chip using a USB ID of 04ca:4005. This ID is added to the driver. The /sys/kernel/debug/usb/devices portion for this device is: T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=4005 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204707Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Fernando Fernandez Mancera authored
[ Upstream commit 039b1f4f ] The socket assignment is wrong, see skb_orphan(): When skb->destructor callback is not set, but skb->sk is set, this hits BUG(). Link: https://bugzilla.redhat.com/show_bug.cgi?id=1651813 Fixes: 554ced0a ("netfilter: nf_tables: add support for native socket matching") Signed-off-by:
Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 8612de3f ] Zorro Lang reported a crash in generic/475 if we try to inactivate a corrupt inode with a NULL attr fork (stack trace shortened somewhat): RIP: 0010:xfs_bmapi_read+0x311/0xb00 [xfs] RSP: 0018:ffff888047f9ed68 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888047f9f038 RCX: 1ffffffff5f99f51 RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000012 RBP: ffff888002a41f00 R08: ffffed10005483f0 R09: ffffed10005483ef R10: ffffed10005483ef R11: ffff888002a41f7f R12: 0000000000000004 R13: ffffe8fff53b5768 R14: 0000000000000005 R15: 0000000000000001 FS: 00007f11d44b5b80(0000) GS:ffff888114200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000ef6000 CR3: 000000002e176003 CR4: 00000000001606e0 Call Trace: xfs_dabuf_map.constprop.18+0x696/0xe50 [xfs] xfs_da_read_buf+0xf5/0x2c0 [xfs] xfs_da3_node_read+0x1d/0x230 [xfs] xfs_attr_inactive+0x3cc/0x5e0 [xfs] xfs_inactive+0x4c8/0x5b0 [xfs] xfs_fs_destroy_inode+0x31b/0x8e0 [xfs] destroy_inode+0xbc/0x190 xfs_bulkstat_one_int+0xa8c/0x1200 [xfs] xfs_bulkstat_one+0x16/0x20 [xfs] xfs_bulkstat+0x6fa/0xf20 [xfs] xfs_ioc_bulkstat+0x182/0x2b0 [xfs] xfs_file_ioctl+0xee0/0x12a0 [xfs] do_vfs_ioctl+0x193/0x1000 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x9f/0x4d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f11d39a3e5b The "obvious" cause is that the attr ifork is null despite the inode claiming an attr fork having at least one extent, but it's not so obvious why we ended up with an inode in that state. Reported-by:
Zorro Lang <zlang@redhat.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204031Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Bill O'Donnell <billodo@redhat.com> Signed-off-by:
-
Ilia Mirkin authored
[ Upstream commit 533f4752 ] Previously center scaling would get scaling applied to it (when it was only supposed to center the image), and aspect-corrected scaling did not always correctly pick whether to reduce width or height for a particular combination of inputs/outputs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 4f7f9645 ] Some machines change the brightness themselves when a brightness hotkey gets pressed, despite us telling them not to. This causes the brightness to go two steps up / down when the hotkey is pressed. This is esp. a problem on older machines with only a few brightness levels. This commit adds a new hw_changes_brightness quirk which makes acpi_video_device_notify() only call backlight_force_update(..., BACKLIGHT_UPDATE_HOTKEY) and not do anything else, notifying userspace that the brightness was changed and leaving it at that fixing the dual step problem. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204077Reported-by:
Kacper Piwiński <cosiekvfj@o2.pl> Tested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jian-Hong Pan authored
[ Upstream commit 7af3f558 ] Realtek RTL8822BE BT chip on ASUS X420FA cannot be turned on correctly after on-off several times. Bluetooth daemon sets BT mode failed when this issue happens. Scanning must be active while turning off for this bug to be hit. bluetoothd[1576]: Failed to set mode: Failed (0x03) If BT is turned off, then turned on again, it works correctly again. According to the vendor driver, the HCI_QUIRK_RESET_ON_CLOSE flag is set during probing. So, this patch makes Realtek's BT reset on close to fix this issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203429Signed-off-by:
Daniel Drake <drake@endlessm.com> Signed-off-by:
-
Stephen Hemminger authored
[ Upstream commit 1e64d7cb ] If IPV6 was disabled, then ss command would cause a kernel warning because the command was attempting to dump IPV6 socket information. The fix is to just remove the warning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202249 Fixes: 432490f9 ("net: ip, diag -- Add diag interface for raw sockets") Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Chris Wilson authored
[ Upstream commit 3b295cb1 ] We need to mark the output polling as disabled to prevent concurrent irqs from queuing new work as shutdown the probe -- causing that work to execute after we have freed the structs: <4> [341.846490] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) <4> [341.846497] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50 <4> [341.846508] Modules linked in: i915(-) vgem thunderbolt snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mcs7830 btusb usbnet btrtl mii btbcm btintel bluetooth ecdh_generic ecc mei_me mei prime_numbers i2c_hid pinctrl_sunrisepoint pinctrl_intel [last unloaded: i915] <4> [341.846546] CPU: 3 PID: 3300 Comm: i915_module_loa Tainted: G U 5.2.0-rc2-CI-CI_DRM_6175+ #1 <4> [341.846553] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018 <4> [341.846560] RIP: 0010:mutex_destroy+0x49/0x50 <4> [341.846565] Code: 00 00 5b c3 e8 a8 9f 3b 00 85 c0 74 ed 8b 05 3e 55 23 01 85 c0 75 e3 48 c7 c6 00 d0 08 82 48 c7 c7 a8 aa 07 82 e8 e7 08 fa ff <0f> 0b eb cc 0f 1f 00 48 b8 11 11 11 11 11 11 11 11 48 89 76 20 48 <4> [341.846578] RSP: 0018:ffffc900006cfdb0 EFLAGS: 00010286 <4> [341.846583] RAX: 0000000000000000 RBX: ffff88826759a168 RCX: 0000000000000000 <4> [341.846589] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffffff8112844c <4> [341.846595] RBP: ffff8882708fa548 R08: 0000000000000000 R09: 0000000000039600 <4> [341.846601] R10: 0000000000000000 R11: 0000000000000ce4 R12: ffffffffa07de1e0 <4> [341.846607] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffa07de2d0 <4> [341.846613] FS: 00007f62b5ae0e40(0000) GS:ffff888276380000(0000) knlGS:0000000000000000 <4> [341.846620] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [341.846626] CR2: 000055a4e064f4a0 CR3: 0000000266b16006 CR4: 00000000003606e0 <4> [341.846632] Call Trace: <4> [341.846639] drm_fb_helper_fini.part.17+0xb3/0x100 <4> [341.846682] intel_fbdev_fini+0x20/0x80 [i915] <4> [341.846722] intel_modeset_cleanup+0x9a/0x140 [i915] <4> [341.846750] i915_driver_unload+0xa3/0x100 [i915] <4> [341.846778] i915_pci_remove+0x19/0x30 [i915] <4> [341.846784] pci_device_remove+0x36/0xb0 <4> [341.846790] device_release_driver_internal+0xd3/0x1b0 <4> [341.846795] driver_detach+0x3f/0x80 <4> [341.846800] bus_remove_driver+0x53/0xd0 <4> [341.846805] pci_unregister_driver+0x25/0xa0 <4> [341.846843] i915_exit+0x16/0x1c [i915] <4> [341.846849] __se_sys_delete_module+0x162/0x210 <4> [341.846855] ? trace_hardirqs_off_thunk+0x1a/0x1c <4> [341.846859] ? do_syscall_64+0xd/0x1c0 <4> [341.846864] do_syscall_64+0x55/0x1c0 <4> [341.846869] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4> [341.846875] RIP: 0033:0x7f62b51871b7 <4> [341.846881] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 <4> [341.846897] RSP: 002b:00007ffe7a227138 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 <4> [341.846904] RAX: ffffffffffffffda RBX: 00007ffe7a2272b0 RCX: 00007f62b51871b7 <4> [341.846910] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000557cd6b55948 <4> [341.846916] RBP: 0000557cd6b558e0 R08: 0000557cd6b5594c R09: 00007ffe7a227160 <4> [341.846922] R10: 00007ffe7a226134 R11: 0000000000000206 R12: 0000000000000000 <4> [341.846927] R13: 00007ffe7a227820 R14: 0000000000000000 R15: 0000000000000000 <4> [341.846936] irq event stamp: 3547847 <4> [341.846940] hardirqs last enabled at (3547847): [<ffffffff819aad2c>] _raw_spin_unlock_irqrestore+0x4c/0x60 <4> [341.846949] hardirqs last disabled at (3547846): [<ffffffff819aab9d>] _raw_spin_lock_irqsave+0xd/0x50 <4> [341.846957] softirqs last enabled at (3547376): [<ffffffff81c0033a>] __do_softirq+0x33a/0x4b9 <4> [341.846966] softirqs last disabled at (3547367): [<ffffffff810b6379>] irq_exit+0xa9/0xc0 <4> [341.846973] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50 <4> [341.846980] ---[ end trace ba94ca8952ba970e ]--- <7> [341.866547] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes <7> [341.890480] [drm:drm_add_display_info] non_desktop set to 0 <7> [341.890530] [drm:drm_add_edid_modes] ELD: no CEA Extension found <7> [341.890537] [drm:drm_add_display_info] non_desktop set to 0 <7> [341.890578] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1] probed modes : <7> [341.890589] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [341.890602] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <4> [341.890628] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [341.890636] CPU: 0 PID: 508 Comm: kworker/0:4 Tainted: G U W 5.2.0-rc2-CI-CI_DRM_6175+ #1 <4> [341.890646] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018 <4> [341.890655] Workqueue: events output_poll_execute <4> [341.890663] RIP: 0010:drm_setup_crtcs+0x13e/0xbe0 <4> [341.890669] Code: 00 41 8b 44 24 58 85 c0 0f 8e f9 01 00 00 44 8b 6c 24 20 44 8b 74 24 28 31 db 31 ed 49 8b 44 24 60 48 63 d5 44 89 ee 83 c5 01 <48> 8b 04 d0 44 89 f2 48 8b 38 48 8b 87 88 01 00 00 48 8b 40 20 e8 <4> [341.890686] RSP: 0018:ffffc9000033fd40 EFLAGS: 00010202 <4> [341.890692] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000000 <4> [341.890700] RDX: 0000000000000001 RSI: 0000000000000c80 RDI: 00000000ffffffff <4> [341.890707] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 <4> [341.890715] R10: 0000000000000c80 R11: 0000000000000000 R12: ffff888267599fe8 <4> [341.890722] R13: 0000000000000c80 R14: 0000000000000708 R15: 0000000000000007 <4> [341.890730] FS: 0000000000000000(0000) GS:ffff888276200000(0000) knlGS:0000000000000000 <4> [341.890739] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [341.890745] CR2: 000055a4e064f4a0 CR3: 000000026d234003 CR4: 00000000003606f0 <4> [341.890752] Call Trace: <4> [341.890760] drm_fb_helper_hotplug_event.part.24+0x89/0xb0 <4> [341.890768] drm_kms_helper_hotplug_event+0x21/0x30 <4> [341.890774] output_poll_execute+0x9d/0x1a0 <4> [341.890782] process_one_work+0x245/0x610 <4> [341.890790] worker_thread+0x37/0x380 <4> [341.890796] ? process_one_work+0x610/0x610 <4> [341.890802] kthread+0x119/0x130 <4> [341.890808] ? kthread_park+0x80/0x80 <4> [341.890815] ret_from_fork+0x3a/0x50 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109964Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603135910.15979-2-chris@chris-wilson.co.ukSigned-off-by:
-
Chao Yu authored
[ Upstream commit c854f4d6 ] As Jungyeon Reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203233 - Reproduces gcc poc_13.c ./run.sh f2fs - Kernel messages F2FS-fs (sdb): Bitmap was wrongly set, blk:4608 kernel BUG at fs/f2fs/segment.c:2133! RIP: 0010:update_sit_entry+0x35d/0x3e0 Call Trace: f2fs_allocate_data_block+0x16c/0x5a0 do_write_page+0x57/0x100 f2fs_do_write_node_page+0x33/0xa0 __write_node_page+0x270/0x4e0 f2fs_sync_node_pages+0x5df/0x670 f2fs_write_checkpoint+0x364/0x13a0 f2fs_sync_fs+0xa3/0x130 f2fs_do_sync_file+0x1a6/0x810 do_fsync+0x33/0x60 __x64_sys_fsync+0xb/0x10 do_syscall_64+0x43/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The testcase fails because that, in fuzzed image, current segment was allocated with LFS type, its .next_blkoff should point to an unused block address, but actually, its bitmap shows it's not. So during allocation, f2fs crash when setting bitmap. Introducing sanity_check_curseg() to check such inconsistence of current in-used segment. Signed-off-by:
-
Michal Suchanek authored
[ Upstream commit c8dc5595 ] Commit 1c2977c0 ("net/ibmvnic: free reset work of removed device from queue") adds a } without corresponding { causing build break. Fixes: 1c2977c0 ("net/ibmvnic: free reset work of removed device from queue") Signed-off-by:
Michal Suchanek <msuchanek@suse.de> Reviewed-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Reviewed-by:
Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by:
-
Mikulas Patocka authored
[ Upstream commit 0c8e9c2d ] Commit 75d66ffb ("dm zoned: properly handle backing device failure") triggers a coverity warning: *** CID 1452808: Memory - illegal accesses (USE_AFTER_FREE) /drivers/md/dm-zoned-target.c: 137 in dmz_submit_bio() 131 clone->bi_private = bioctx; 132 133 bio_advance(bio, clone->bi_iter.bi_size); 134 135 refcount_inc(&bioctx->ref); 136 generic_make_request(clone); >>> CID 1452808: Memory - illegal accesses (USE_AFTER_FREE) >>> Dereferencing freed pointer "clone". 137 if (clone->bi_status == BLK_STS_IOERR) 138 return -EIO; 139 140 if (bio_op(bio) == REQ_OP_WRITE && dmz_is_seq(zone)) 141 zone->wp_block += nr_blocks; 142 The "clone" bio may be processed and freed before the check "clone->bi_status == BLK_STS_IOERR" - so this check can access invalid memory. Fixes: 75d66ffb ("dm zoned: properly handle backing device failure") Cc: stable@vger.kernel.org Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Chao Yu authored
[ Upstream commit a37d0862 ] As Pavel Machek reported: "We normally use -EUCLEAN to signal filesystem corruption. Plus, it is good idea to report it to the syslog and mark filesystem as "needing fsck" if filesystem can do that." Still we need improve the original patch with: - use unlikely keyword - add message print - return EUCLEAN However, after rethink this patch, I don't think we should add such condition check here as below reasons: - We have already checked the field in f2fs_sanity_check_ckpt(), - If there is fs corrupt or security vulnerability, there is nothing to guarantee the field is integrated after the check, unless we do the check before each of its use, however no filesystem does that. - We only have similar check for bitmap, which was added due to there is bitmap corruption happened on f2fs' runtime in product. - There are so many key fields in SB/CP/NAT did have such check after f2fs_sanity_check_{sb,cp,..}. So I propose to revert this unneeded check. This reverts commit 56f3ce67. Signed-off-by:
-
zhengbin authored
[ Upstream commit e26cc082 ] blk_exit_queue will free elevator_data, while blk_mq_requeue_work will access it. Move cancel of requeue_work to the front of blk_exit_queue to avoid use-after-free. blk_exit_queue blk_mq_requeue_work __elevator_exit blk_mq_run_hw_queues blk_mq_exit_sched blk_mq_run_hw_queue dd_exit_queue blk_mq_hctx_has_pending kfree(elevator_data) blk_mq_sched_has_work dd_has_work Fixes: fbc2a15e ("blk-mq: move cancel of requeue_work into blk_mq_release") Cc: stable@vger.kernel.org Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jianchao Wang authored
[ Upstream commit 5b202853 ] blk_mq_realloc_hw_ctxs could be invoked during update hw queues. At the momemt, IO is blocked. Change the gfp flags from GFP_KERNEL to GFP_NOIO to avoid forever hang during memory allocation in blk_mq_realloc_hw_ctxs. Signed-off-by:
Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by:
-
Steven Price authored
[ Upstream commit 5d59aa8f ] Since commit 54c7a891 ("initramfs: free initrd memory if opening /initrd.image fails"), the kernel has unconditionally attempted to free the initrd even if it doesn't exist. In the non-existent case this causes a boot-time splat if CONFIG_DEBUG_VIRTUAL is enabled due to a call to virt_to_phys() with a NULL address. Instead we should check that the initrd actually exists and only attempt to free it if it does. Link: http://lkml.kernel.org/r/20190516143125.48948-1-steven.price@arm.com Fixes: 54c7a891 ("initramfs: free initrd memory if opening /initrd.image fails") Signed-off-by:
Steven Price <steven.price@arm.com> Reported-by:
Mark Rutland <mark.rutland@arm.com> Tested-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Coly Li authored
[ Upstream commit cdca22bc ] Commit 95f18c9d ("bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set") forgets to remove the original define of LIST_HEAD(journal), which makes the change no take effect. This patch removes redundant variable LIST_HEAD(journal) from run_cache_set(), to make Shenghui's fix working. Fixes: 95f18c9d ("bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set") Reported-by:
Juha Aatrokoski <juha.aatrokoski@aalto.fi> Cc: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Dexuan Cui authored
[ Upstream commit 533ca1fe ] The slot must be removed before the pci_dev is removed, otherwise a panic can happen due to use-after-free. Fixes: 15becc2b ("PCI: hv: Add hv_pci_remove_slots() when we unload the driver") Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Surbhi Palande authored
[ Upstream commit 1166c1f2 ] As a part of the sanity checking while mounting, distinct segment number assignment to data and node segments is verified. Fixing a small bug in this verification between node and data segments. We need to check all the data segments with all the node segments. Fixes: 042be0f8 ("f2fs: fix to do sanity check with current segment number") Signed-off-by:
Surbhi Palande <csurbhi@gmail.com> Reviewed-by:
-
Marc Zyngier authored
[ Upstream commit c9c96e30 ] When allocating a range of LPIs for a Multi-MSI capable device, this allocation extended to the closest power of 2. But on the release path, the interrupts are released one by one. This results in not releasing the "extra" range, leaking the its_device. Trying to reprobe the device will then fail. Fix it by releasing the LPIs the same way we allocate them. Fixes: 8208d170 ("irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size") Reported-by:
Jiaxing Luo <luojiaxing@huawei.com> Tested-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/f5e948aa-e32f-3f74-ae30-31fee06c2a74@huawei.comSigned-off-by:
-
Lorenz Bauer authored
[ Upstream commit 86edaed3 ] Commit c3494801 ("bpf: check pending signals while verifying programs") makes it possible for the BPF_PROG_LOAD to fail with EAGAIN. Retry unconditionally in this case. Fixes: c3494801 ("bpf: check pending signals while verifying programs") Signed-off-by:
Lorenz Bauer <lmb@cloudflare.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Shirish S authored
[ Upstream commit 00fedbe6 ] This reverts commit dbd8299c32f6f413f6cfe322fe0308f3cfc577e8. Reason for revert: This patch sends msg PPSMC_MSG_DisableLowMemoryPstate(0x002e) in wrong of sequence to SMU which is before PPSMC_MSG_UVDPowerON (0x0008). This leads to SMU failing to service the request as it is dependent on UVD to be powered ON, since it accesses UVD registers. This msg should ideally be sent only when the UVD is about to decode a 4k video. Signed-off-by:
Shirish S <shirish.s@amd.com> Signed-off-by:
suresh guttula <suresh.guttula@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Himanshu Madhani authored
[ Upstream commit ef801f07 ] This patch fixes commit bcc71cc3 ("scsi: qla2xxx: Fix for double free of SRB structure") which placed code in wrong routines. Also updated the use of WARN_ON() to WARN_ON_ONCE() to prevent flooding log messages. Fixes: bcc71cc3 ("scsi: qla2xxx: Fix for double free of SRB structure") Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Quinn Tran authored
[ Upstream commit 9ba1cb25 ] When all fabric scan retries fail, remove all RPorts, DMA resources for the command. Otherwise we have stale Rports. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
Quinn Tran authored
[ Upstream commit e112761a ] Turn off IOCB timeout timer on IOCB completion instead of turning it off in a deferred task. This prevent false alarm if the deferred task is stalled out. Signed-off-by:
-
Waiman Long authored
[ Upstream commit 71492580 ] Tetsuo Handa had reported he saw an incorrect "downgrading a read lock" warning right after a previous lockdep warning. It is likely that the previous warning turned off lock debugging causing the lockdep to have inconsistency states leading to the lock downgrade warning. Fix that by add a check for debug_locks at the beginning of __lock_downgrade(). Debugged-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by:
Waiman Long <longman@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/r/1547093005-26085-1-git-send-email-longman@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
David Lechner authored
[ Upstream commit 87a2b65f ] This adds rate limiting to the message that is printed when reading a power supply property via sysfs returns an error. This will prevent userspace applications from unintentionally dDOSing the system by continuously reading a property that returns an error. Signed-off-by:
David Lechner <david@lechnology.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 957063c9 ] Clang warns when one enumerated type is implicitly converted to another: drivers/pinctrl/sprd/pinctrl-sprd.c:845:19: warning: implicit conversion from enumeration type 'enum sprd_pinconf_params' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] {"sprd,control", SPRD_PIN_CONFIG_CONTROL, 0}, ~ ^~~~~~~~~~~~~~~~~~~~~~~ drivers/pinctrl/sprd/pinctrl-sprd.c:846:22: warning: implicit conversion from enumeration type 'enum sprd_pinconf_params' to different enumeration type 'enum pin_config_param' [-Wenum-conversion] {"sprd,sleep-mode", SPRD_PIN_CONFIG_SLEEP_MODE, 0}, ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~ It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns. Link: https://github.com/ClangBuiltLinux/linux/issues/138Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Josh Poimboeuf authored
commit f73b3cc3 upstream. If the build user has the CFLAGS variable set in their environment, objtool blindly appends to it, which can cause unexpected behavior. Clobber CFLAGS to ensure consistent objtool compilation behavior. Reported-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Tested-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/83a276df209962e6058fcb6c615eef9d401c21bc.1567121311.git.jpoimboe@redhat.comSigned-off-by:
-
Takashi Iwai authored
commit d2c63b7d upstream. It's reported that the garbled sound on HP Envy x360 13z-ag000 (Ryzen Laptop) is fixed by the same workaround applied to other AMD chips. Update the driver_data entry for Raven (1022:15e3) to use the newly introduced preset, AZX_DCAPS_PRESET_AMD_SB. Since it already contains AZX_DCAPS_PM_RUNTIME, we can drop that bit, too. Reported-and-tested-by:
Dennis Padiernos <depadiernos@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190920073040.31764-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Shih-Yuan Lee (FourDollars) authored
commit 7b485d17 upstream. The same fixup to enable laptop imic is needed for ASUS M9V with AD1986A codec like another HP machine. Signed-off-by:
Shih-Yuan Lee (FourDollars) <fourdollars@debian.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190920134052.GA8035@localhostSigned-off-by:
-
Takashi Sakamoto authored
commit 3a9236e9 upstream. At higher sampling rate (e.g. 192.0 kHz), Alesis iO26 transfers 4 data channels per data block in CIP. Both iO14 and iO26 have the same contents in their configuration ROM. For this reason, ALSA Dice driver attempts to distinguish them according to the value of TX0_AUDIO register at probe callback. Although the way is valid at lower and middle sampling rate, it's lastly invalid at higher sampling rate because because the two models returns the same value for read transaction to the register. In the most cases, users just plug-in the device and ALSA dice driver detects it. In the case, the device runs at lower sampling rate and the driver detects expectedly. For this reason, this commit leaves the way to detect as is. Fixes: 28b208f6 ("ALSA: dice: add parameters of stream formats for models produced by Alesis") Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20190916101851.30409-1-o-takashi@sakamocchi.jpSigned-off-by:
-
