- 08 Dec, 2018 26 commits
-
-
Martin Wilck authored
commit 81df022b upstream. Cleanly fill memory for "vendor" and "model" with 0-bytes for the "compatible" case rather than adding only a single 0 byte. This simplifies the devinfo code a a bit, and avoids mistakes in other places of the code (not in current upstream, but we had one such mistake in the SUSE kernel). [mkp: applied by hand and added braces] Signed-off-by:
Martin Wilck <mwilck@suse.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrea Arcangeli authored
commit dcf7fe9d upstream. Set the page dirty if VM_WRITE is not set because in such case the pte won't be marked dirty and the page would be reclaimed without writepage (i.e. swapout in the shmem case). This was found by source review. Most apps (certainly including QEMU) only use UFFDIO_COPY on PROT_READ|PROT_WRITE mappings or the app can't modify the memory in the first place. This is for correctness and it could help the non cooperative use case to avoid unexpected data loss. Link: http://lkml.kernel.org/r/20181126173452.26955-6-aarcange@redhat.comReviewed-by:
Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org Fixes: 4c27fe4c ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Reported-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andrea Arcangeli authored
commit e2a50c1f upstream. With MAP_SHARED: recheck the i_size after taking the PT lock, to serialize against truncate with the PT lock. Delete the page from the pagecache if the i_size_read check fails. With MAP_PRIVATE: check the i_size after the PT lock before mapping anonymous memory or zeropages into the MAP_PRIVATE shmem mapping. A mostly irrelevant cleanup: like we do the delete_from_page_cache() pagecache removal after dropping the PT lock, the PT lock is a spinlock so drop it before the sleepable page lock. Link: http://lkml.kernel.org/r/20181126173452.26955-5-aarcange@redhat.com Fixes: 4c27fe4c ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Reviewed-by:
Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Andrea Arcangeli authored
commit 5b51072e upstream. Userfaultfd did not create private memory when UFFDIO_COPY was invoked on a MAP_PRIVATE shmem mapping. Instead it wrote to the shmem file, even when that had not been opened for writing. Though, fortunately, that could only happen where there was a hole in the file. Fix the shmem-backed implementation of UFFDIO_COPY to create private memory for MAP_PRIVATE mappings. The hugetlbfs-backed implementation was already correct. This change is visible to userland, if userfaultfd has been used in unintended ways: so it introduces a small risk of incompatibility, but is necessary in order to respect file permissions. An app that uses UFFDIO_COPY for anything like postcopy live migration won't notice the difference, and in fact it'll run faster because there will be no copy-on-write and memory waste in the tmpfs pagecache anymore. Userfaults on MAP_PRIVATE shmem keep triggering only on file holes like before. The real zeropage can also be built on a MAP_PRIVATE shmem mapping through UFFDIO_ZEROPAGE and that's safe because the zeropage pte is never dirty, in turn even an mprotect upgrading the vma permission from PROT_READ to PROT_READ|PROT_WRITE won't make the zeropage pte writable. Link: http://lkml.kernel.org/r/20181126173452.26955-3-aarcange@redhat.com Fixes: 4c27fe4c ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by:
-
Andrea Arcangeli authored
commit 9e368259 upstream. Patch series "userfaultfd shmem updates". Jann found two bugs in the userfaultfd shmem MAP_SHARED backend: the lack of the VM_MAYWRITE check and the lack of i_size checks. Then looking into the above we also fixed the MAP_PRIVATE case. Hugh by source review also found a data loss source if UFFDIO_COPY is used on shmem MAP_SHARED PROT_READ mappings (the production usages incidentally run with PROT_READ|PROT_WRITE, so the data loss couldn't happen in those production usages like with QEMU). The whole patchset is marked for stable. We verified QEMU postcopy live migration with guest running on shmem MAP_PRIVATE run as well as before after the fix of shmem MAP_PRIVATE. Regardless if it's shmem or hugetlbfs or MAP_PRIVATE or MAP_SHARED, QEMU unconditionally invokes a punch hole if the guest mapping is filebacked and a MADV_DONTNEED too (needed to get rid of the MAP_PRIVATE COWs and for the anon backend). This patch (of 5): We internally used EFAULT to communicate with the caller, switch to ENOENT, so EFAULT can be used as a non internal retval. Link: http://lkml.kernel.org/r/20181126173452.26955-2-aarcange@redhat.com Fixes: 4c27fe4c ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by:
-
Lyude Paul authored
commit 97b2a318 upstream. Currently on driver bringup with KASAN enabled, meson triggers an OOB memory access as shown below: [ 117.904528] ================================================================== [ 117.904560] BUG: KASAN: global-out-of-bounds in meson_viu_set_osd_lut+0x7a0/0x890 [ 117.904588] Read of size 4 at addr ffff20000a63ce24 by task systemd-udevd/498 [ 117.904601] [ 118.083372] CPU: 4 PID: 498 Comm: systemd-udevd Not tainted 4.20.0-rc3Lyude-Test+ #20 [ 118.091143] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 118.099768] Call trace: [ 118.102181] dump_backtrace+0x0/0x3e8 [ 118.105796] show_stack+0x14/0x20 [ 118.109083] dump_stack+0x130/0x1c4 [ 118.112539] print_address_description+0x60/0x25c [ 118.117214] kasan_report+0x1b4/0x368 [ 118.120851] __asan_report_load4_noabort+0x18/0x20 [ 118.125566] meson_viu_set_osd_lut+0x7a0/0x890 [ 118.129953] meson_viu_init+0x10c/0x290 [ 118.133741] meson_drv_bind_master+0x474/0x748 [ 118.138141] meson_drv_bind+0x10/0x18 [ 118.141760] try_to_bring_up_master+0x3d8/0x768 [ 118.146249] component_add+0x214/0x570 [ 118.149978] meson_dw_hdmi_probe+0x18/0x20 [meson_dw_hdmi] [ 118.155404] platform_drv_probe+0x98/0x138 [ 118.159455] really_probe+0x2a0/0xa70 [ 118.163070] driver_probe_device+0x1b4/0x2d8 [ 118.167299] __driver_attach+0x200/0x280 [ 118.171189] bus_for_each_dev+0x10c/0x1a8 [ 118.175144] driver_attach+0x38/0x50 [ 118.178681] bus_add_driver+0x330/0x608 [ 118.182471] driver_register+0x140/0x388 [ 118.186361] __platform_driver_register+0xc8/0x108 [ 118.191117] meson_dw_hdmi_platform_driver_init+0x1c/0x1000 [meson_dw_hdmi] [ 118.198022] do_one_initcall+0x12c/0x3bc [ 118.201883] do_init_module+0x1fc/0x638 [ 118.205673] load_module+0x4b4c/0x6808 [ 118.209387] __se_sys_init_module+0x2e8/0x3c0 [ 118.213699] __arm64_sys_init_module+0x68/0x98 [ 118.218100] el0_svc_common+0x104/0x210 [ 118.221893] el0_svc_handler+0x48/0xb8 [ 118.225594] el0_svc+0x8/0xc [ 118.228429] [ 118.229887] The buggy address belongs to the variable: [ 118.235007] eotf_33_linear_mapping+0x84/0xc0 [ 118.239301] [ 118.240752] Memory state around the buggy address: [ 118.245522] ffff20000a63cd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 118.252695] ffff20000a63cd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 118.259850] >ffff20000a63ce00: 00 00 00 00 04 fa fa fa fa fa fa fa 00 00 00 00 [ 118.267000] ^ [ 118.271222] ffff20000a63ce80: 00 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 [ 118.278393] ffff20000a63cf00: 00 00 00 00 00 00 00 00 00 00 00 00 04 fa fa fa [ 118.285542] ================================================================== [ 118.292699] Disabling lock debugging due to kernel taint It seems that when looping through the OSD EOTF LUT maps, we use the same max iterator for OETF: 20. This is wrong though, since 20*2 is 40, which means that we'll stop out of bounds on the EOTF maps. But, this whole thing is already confusing enough to read through as-is, so let's just replace all of the hardcoded sizes with OSD_(OETF/EOTF)_LUT_SIZE / 2. Signed-off-by:
Lyude Paul <lyude@redhat.com> Fixes: bbbe775e ("drm: Add support for Amlogic Meson Graphic Controller") Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: <stable@vger.kernel.org> # v4.10+ Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Lyude Paul authored
commit 995b278e upstream. Seeing as we use this registermap in the context of our IRQ handlers, we need to be using spinlocks for reading/writing registers so that we can still read them from IRQ handlers without having to grab any mutexes and accidentally sleep. We don't currently do this, as pointed out by lockdep: [ 18.403770] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [ 18.406744] in_atomic(): 1, irqs_disabled(): 128, pid: 68, name: kworker/u17:0 [ 18.413864] INFO: lockdep is turned off. [ 18.417675] irq event stamp: 12 [ 18.420778] hardirqs last enabled at (11): [<ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60 [ 18.429510] hardirqs last disabled at (12): [<ffff000008a48914>] __schedule+0xc4/0xa60 [ 18.437345] softirqs last enabled at (0): [<ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50 [ 18.446684] softirqs last disabled at (0): [<0000000000000000>] (null) [ 18.453979] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G W O 4.20.0-rc3Lyude-Test+ #9 [ 18.469839] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 18.480037] Workqueue: hci0 hci_power_on [bluetooth] [ 18.487138] Call trace: [ 18.494192] dump_backtrace+0x0/0x1b8 [ 18.501280] show_stack+0x14/0x20 [ 18.508361] dump_stack+0xbc/0xf4 [ 18.515427] ___might_sleep+0x140/0x1d8 [ 18.522515] __might_sleep+0x50/0x88 [ 18.529582] __mutex_lock+0x60/0x870 [ 18.536621] mutex_lock_nested+0x1c/0x28 [ 18.543660] regmap_lock_mutex+0x10/0x18 [ 18.550696] regmap_read+0x38/0x70 [ 18.557727] dw_hdmi_hardirq+0x58/0x138 [dw_hdmi] [ 18.564804] __handle_irq_event_percpu+0xac/0x410 [ 18.571891] handle_irq_event_percpu+0x34/0x88 [ 18.578982] handle_irq_event+0x48/0x78 [ 18.586051] handle_fasteoi_irq+0xac/0x160 [ 18.593061] generic_handle_irq+0x24/0x38 [ 18.599989] __handle_domain_irq+0x60/0xb8 [ 18.606857] gic_handle_irq+0x50/0xa0 [ 18.613659] el1_irq+0xb4/0x130 [ 18.620394] debug_lockdep_rcu_enabled+0x2c/0x30 [ 18.627111] schedule+0x38/0xa0 [ 18.633781] schedule_timeout+0x3a8/0x510 [ 18.640389] wait_for_common+0x15c/0x180 [ 18.646905] wait_for_completion+0x14/0x20 [ 18.653319] mmc_wait_for_req_done+0x28/0x168 [ 18.659693] mmc_wait_for_req+0xa8/0xe8 [ 18.665978] mmc_wait_for_cmd+0x64/0x98 [ 18.672180] mmc_io_rw_direct_host+0x94/0x130 [ 18.678385] mmc_io_rw_direct+0x10/0x18 [ 18.684516] sdio_enable_func+0xe8/0x1d0 [ 18.690627] btsdio_open+0x24/0xc0 [btsdio] [ 18.696821] hci_dev_do_open+0x64/0x598 [bluetooth] [ 18.703025] hci_power_on+0x50/0x270 [bluetooth] [ 18.709163] process_one_work+0x2a0/0x6e0 [ 18.715252] worker_thread+0x40/0x448 [ 18.721310] kthread+0x12c/0x130 [ 18.727326] ret_from_fork+0x10/0x1c [ 18.735555] ------------[ cut here ]------------ [ 18.741430] do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000006265ec59>] wait_for_common+0x140/0x180 [ 18.752417] WARNING: CPU: 0 PID: 68 at kernel/sched/core.c:6096 __might_sleep+0x7c/0x88 [ 18.760553] Modules linked in: dm_mirror dm_region_hash dm_log dm_mod btsdio bluetooth snd_soc_hdmi_codec dw_hdmi_i2s_audio ecdh_generic brcmfmac brcmutil cfg80211 rfkill ir_nec_decoder meson_dw_hdmi(O) dw_hdmi rc_geekbox meson_rng meson_ir ao_cec rng_core rc_core cec leds_pwm efivars nfsd ip_tables x_tables crc32_generic f2fs uas meson_gxbb_wdt pwm_meson efivarfs ipv6 [ 18.799469] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G W O 4.20.0-rc3Lyude-Test+ #9 [ 18.808858] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018 [ 18.818045] Workqueue: hci0 hci_power_on [bluetooth] [ 18.824088] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 18.829891] pc : __might_sleep+0x7c/0x88 [ 18.835722] lr : __might_sleep+0x7c/0x88 [ 18.841256] sp : ffff000008003cb0 [ 18.846751] x29: ffff000008003cb0 x28: 0000000000000000 [ 18.852269] x27: ffff00000938e000 x26: ffff800010283000 [ 18.857726] x25: ffff800010353280 x24: ffff00000868ef50 [ 18.863166] x23: 0000000000000000 x22: 0000000000000000 [ 18.868551] x21: 0000000000000000 x20: 000000000000038c [ 18.873850] x19: ffff000008cd08c0 x18: 0000000000000010 [ 18.879081] x17: ffff000008a68cb0 x16: 0000000000000000 [ 18.884197] x15: 0000000000aaaaaa x14: 0e200e200e200e20 [ 18.889239] x13: 0000000000000001 x12: 00000000ffffffff [ 18.894261] x11: ffff000008adfa48 x10: 0000000000000001 [ 18.899517] x9 : ffff0000092a0158 x8 : 0000000000000000 [ 18.904674] x7 : ffff00000812136c x6 : 0000000000000000 [ 18.909895] x5 : 0000000000000000 x4 : 0000000000000001 [ 18.915080] x3 : 0000000000000007 x2 : 0000000000000007 [ 18.920269] x1 : 99ab8e9ebb6c8500 x0 : 0000000000000000 [ 18.925443] Call trace: [ 18.929904] __might_sleep+0x7c/0x88 [ 18.934311] __mutex_lock+0x60/0x870 [ 18.938687] mutex_lock_nested+0x1c/0x28 [ 18.943076] regmap_lock_mutex+0x10/0x18 [ 18.947453] regmap_read+0x38/0x70 [ 18.951842] dw_hdmi_hardirq+0x58/0x138 [dw_hdmi] [ 18.956269] __handle_irq_event_percpu+0xac/0x410 [ 18.960712] handle_irq_event_percpu+0x34/0x88 [ 18.965176] handle_irq_event+0x48/0x78 [ 18.969612] handle_fasteoi_irq+0xac/0x160 [ 18.974058] generic_handle_irq+0x24/0x38 [ 18.978501] __handle_domain_irq+0x60/0xb8 [ 18.982938] gic_handle_irq+0x50/0xa0 [ 18.987351] el1_irq+0xb4/0x130 [ 18.991734] debug_lockdep_rcu_enabled+0x2c/0x30 [ 18.996180] schedule+0x38/0xa0 [ 19.000609] schedule_timeout+0x3a8/0x510 [ 19.005064] wait_for_common+0x15c/0x180 [ 19.009513] wait_for_completion+0x14/0x20 [ 19.013951] mmc_wait_for_req_done+0x28/0x168 [ 19.018402] mmc_wait_for_req+0xa8/0xe8 [ 19.022809] mmc_wait_for_cmd+0x64/0x98 [ 19.027177] mmc_io_rw_direct_host+0x94/0x130 [ 19.031563] mmc_io_rw_direct+0x10/0x18 [ 19.035922] sdio_enable_func+0xe8/0x1d0 [ 19.040294] btsdio_open+0x24/0xc0 [btsdio] [ 19.044742] hci_dev_do_open+0x64/0x598 [bluetooth] [ 19.049228] hci_power_on+0x50/0x270 [bluetooth] [ 19.053687] process_one_work+0x2a0/0x6e0 [ 19.058143] worker_thread+0x40/0x448 [ 19.062608] kthread+0x12c/0x130 [ 19.067064] ret_from_fork+0x10/0x1c [ 19.071513] irq event stamp: 12 [ 19.075937] hardirqs last enabled at (11): [<ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60 [ 19.083560] hardirqs last disabled at (12): [<ffff000008a48914>] __schedule+0xc4/0xa60 [ 19.091401] softirqs last enabled at (0): [<ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50 [ 19.100801] softirqs last disabled at (0): [<0000000000000000>] (null) [ 19.108135] ---[ end trace 38c4920787b88c75 ]--- So, fix this by enabling the fast_io option in our regmap config so that regmap uses spinlocks for locking instead of mutexes. Signed-off-by:
-
Sergio Correia authored
commit 23a336b3 upstream. When drm_new_set_master() fails, set is_master to 0, to prevent a possible NULL pointer deref. Here is a problematic flow: we check is_master in drm_is_current_master(), then proceed to call drm_lease_owner() passing master. If we do not restore is_master status when drm_new_set_master() fails, we may have a situation in which is_master will be 1 and master itself, NULL, leading to the deref of a NULL pointer in drm_lease_owner(). This fixes the following OOPS, observed on an ArchLinux running a 4.19.2 kernel: [ 97.804282] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [ 97.807224] PGD 0 P4D 0 [ 97.807224] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 97.807224] CPU: 0 PID: 1348 Comm: xfwm4 Tainted: P OE 4.19.2-arch1-1-ARCH #1 [ 97.807224] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P5.10 10/16/2018 [ 97.807224] RIP: 0010:drm_lease_owner+0xd/0x20 [drm] [ 97.807224] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44 [ 97.807224] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202 [ 97.807224] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88 [ 97.807224] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000 [ 97.807224] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000 [ 97.807224] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888 [ 97.807224] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8 [ 97.807224] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000 [ 97.807224] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 97.807224] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0 [ 97.807224] Call Trace: [ 97.807224] drm_is_current_master+0x1a/0x30 [drm] [ 97.807224] drm_master_release+0x3e/0x130 [drm] [ 97.807224] drm_file_free.part.0+0x2be/0x2d0 [drm] [ 97.807224] drm_open+0x1ba/0x1e0 [drm] [ 97.807224] drm_stub_open+0xaf/0xe0 [drm] [ 97.807224] chrdev_open+0xa3/0x1b0 [ 97.807224] ? cdev_put.part.0+0x20/0x20 [ 97.807224] do_dentry_open+0x132/0x340 [ 97.807224] path_openat+0x2d1/0x14e0 [ 97.807224] ? mem_cgroup_commit_charge+0x7a/0x520 [ 97.807224] do_filp_open+0x93/0x100 [ 97.807224] ? __check_object_size+0x102/0x189 [ 97.807224] ? _raw_spin_unlock+0x16/0x30 [ 97.807224] do_sys_open+0x186/0x210 [ 97.807224] do_syscall_64+0x5b/0x170 [ 97.807224] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 97.807224] RIP: 0033:0x7f4147b07976 [ 97.807224] Code: 89 54 24 08 e8 7b f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f2 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 89 44 24 08 e8 a6 f4 ff ff 8b 44 [ 97.807224] RSP: 002b:00007ffcced96ca0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 [ 97.807224] RAX: ffffffffffffffda RBX: 00005619d5037f80 RCX: 00007f4147b07976 [ 97.807224] RDX: 0000000000000002 RSI: 00005619d46b969c RDI: 00000000ffffff9c [ 98.040039] RBP: 0000000000000024 R08: 0000000000000000 R09: 0000000000000000 [ 98.040039] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000024 [ 98.040039] R13: 0000000000000012 R14: 00005619d5035950 R15: 0000000000000012 [ 98.040039] Modules linked in: nct6775 hwmon_vid algif_skcipher af_alg nls_iso8859_1 nls_cp437 vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common arc4 videodev media snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_rawmidi snd_seq_device mousedev input_leds iwlmvm mac80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd kvm_amd snd_hda_core kvm iwlwifi snd_hwdep r8169 wmi_bmof cfg80211 snd_pcm irqbypass snd_timer snd libphy soundcore pinctrl_amd rfkill pcspkr sp5100_tco evdev gpio_amdpt k10temp mac_hid i2c_piix4 wmi pcc_cpufreq acpi_cpufreq vboxnetflt(OE) vboxnetadp(OE) vboxpci(OE) vboxdrv(OE) msr sg crypto_user ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto uas usb_storage dm_crypt hid_generic usbhid hid [ 98.040039] dm_mod raid1 md_mod sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc ahci libahci aesni_intel aes_x86_64 libata crypto_simd cryptd glue_helper ccp xhci_pci rng_core scsi_mod xhci_hcd nvidia_drm(POE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm agpgart nvidia_uvm(POE) nvidia_modeset(POE) nvidia(POE) ipmi_devintf ipmi_msghandler [ 98.040039] CR2: 0000000000000080 [ 98.040039] ---[ end trace 3b65093b6fe62b2f ]--- [ 98.040039] RIP: 0010:drm_lease_owner+0xd/0x20 [drm] [ 98.040039] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44 [ 98.040039] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202 [ 98.040039] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88 [ 98.040039] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000 [ 98.040039] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000 [ 98.040039] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888 [ 98.040039] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8 [ 98.040039] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000 [ 98.040039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 98.040039] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0 Signed-off-by:
Sergio Correia <sergio@correia.cc> Cc: stable@vger.kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181122053329.2692-1-sergio@correia.ccSigned-off-by:
-
Sam Bobroff authored
commit dc25ab06 upstream. If the platform has no IO space, ioregs is placed next to the already allocated regs. In this case, it should not be separately freed. This prevents a kernel warning from __vunmap "Trying to vfree() nonexistent vm area" when unloading the driver. Fixes: 0dd68309 ("drm/ast: Try to use MMIO registers when PIO isn't supported") Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Michael Guralnik authored
commit db7a691a upstream. If the firmware reports a connection width that is not 1x, 4x, 8x or 12x it causes the driver to fail during initialization. To prevent this failure every time a new width is introduced to the RDMA stack, we will set a default 4x width for these widths which ar unknown to the driver. This is needed to allow to run old kernels with new firmware. Cc: <stable@vger.kernel.org> # 4.1 Fixes: 1b5daf11 ("IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 mode") Signed-off-by:
Michael Guralnik <michaelgur@mellanox.com> Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Dmitry V. Levin authored
commit c50cbd85 upstream. When checking for TIF_32BIT_REGS flag, mips_get_syscall_arg() should use the task specified as its argument instead of the current task. This potentially affects all syscall_get_arguments() users who specify tasks different from the current. Fixes: c0ff3c53 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.") Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21185/ Cc: Elvira Khabirova <lineprinter@altlinux.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v3.13+ Signed-off-by:
-
Mathias Kresin authored
commit 7d35baa4 upstream. In case the nd_sd group is set to the sd-card function, Pins 45 + 46 are configured as GPIOs. If they are blocked by the sd function, they can't be used as GPIOs. Reported-by:
Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by:
Mathias Kresin <dev@kresin.me> Signed-off-by:
-
Andrea Parri authored
commit 09d3f015 upstream. Commit: 142b18dd ("uprobes: Fix handle_swbp() vs unregister() + register() race") added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb() memory barriers, to ensure that handle_swbp() uses fully-initialized uprobes only. However, the smp_rmb() is mis-placed: this barrier should be placed after handle_swbp() has tested for the flag, thus guaranteeing that (program-order) subsequent loads from the uprobe can see the initial stores performed by prepare_uprobe(). Move the smp_rmb() accordingly. Also amend the comments associated to the two memory barriers to indicate their actual locations. Signed-off-by:
Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: stable@kernel.org Fixes: 142b18dd ("uprobes: Fix handle_swbp() vs unregister() + register() race") Link: http://lkml.kernel.org/r/20181122161031.15179-1-andrea.parri@amarulasolutions.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Sagi Grimberg authored
commit 24c3456c upstream. If for some reason we failed to query the mr status, we need to make sure to provide sufficient information for an ambiguous error (guard error on sector 0). Fixes: 0a7a08ad ("IB/iser: Implement check_protection") Cc: <stable@vger.kernel.org> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Arnd Bergmann authored
commit 2cf2f0d5 upstream. gcc discovered that the memcpy() arguments in kdbnearsym() overlap, so we should really use memmove(), which is defined to handle that correctly: In function 'memcpy', inlined from 'kdbnearsym' at /git/arm-soc/kernel/debug/kdb/kdb_support.c:132:4: /git/arm-soc/include/linux/string.h:353:9: error: '__builtin_memcpy' accessing 792 bytes at offsets 0 and 8 overlaps 784 bytes at offset 8 [-Werror=restrict] return __builtin_memcpy(p, q, size); Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
Arnd Bergmann authored
commit 58930cce upstream. As gcc-8 points out, the bit mask check makes no sense here: drivers/staging/rts5208/sd.c: In function 'ext_sd_send_cmd_get_rsp': drivers/staging/rts5208/sd.c:4130:25: error: bitwise comparison always evaluates to true [-Werror=tautological-compare] However, the code is even more bogus, as we have already checked for the SD_RSP_TYPE_R0 case earlier in the function and returned success. As seen in the mmc/sd driver core, SD_RSP_TYPE_R0 means "no response" anyway, so checking for a particular response would not help either. This just removes the nonsensical code to get rid of the warning. Signed-off-by:
-
Arnd Bergmann authored
commit 8c5a50e8 upstream. The bfa driver has a number of real issues with string termination that gcc-8 now points out: drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_iocmd_port_get_attr': drivers/scsi/bfa/bfad_bsg.c:320:9: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init': drivers/scsi/bfa/bfa_fcs.c:775:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c:781:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c:788:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c:801:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c:808:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init': drivers/scsi/bfa/bfa_fcs.c:837:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c:844:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c:852:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init': drivers/scsi/bfa/bfa_fcs.c:778:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs.c:784:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs.c:803:3: error: 'strncat' output may be truncated copying 44 bytes from a string of length 63 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs.c:811:3: error: 'strncat' output may be truncated copying 16 bytes from a string of length 63 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init': drivers/scsi/bfa/bfa_fcs.c:840:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs.c:847:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_hbaattr': drivers/scsi/bfa/bfa_fcs_lport.c:2657:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs_lport.c:2659:11: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ms_gmal_response': drivers/scsi/bfa/bfa_fcs_lport.c:3232:5: error: 'strncpy' output may be truncated copying 16 bytes from a string of length 247 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_send_rspn_id': drivers/scsi/bfa/bfa_fcs_lport.c:4670:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs_lport.c:4682:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_util_send_rspn_id': drivers/scsi/bfa/bfa_fcs_lport.c:5206:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs_lport.c:5215:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_portattr': drivers/scsi/bfa/bfa_fcs_lport.c:2751:2: error: 'strncpy' specified bound 128 equals destination size [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rspnid_build': drivers/scsi/bfa/bfa_fcbuild.c:1254:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcbuild.c:1253:25: note: length computed here drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rsnn_nn_build': drivers/scsi/bfa/bfa_fcbuild.c:1275:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] In most cases, this can be addressed by correctly calling strlcpy and strlcat instead of strncpy/strncat, with the size of the destination buffer as the last argument. For consistency, I'm changing the other callers of strncpy() in this driver the same way. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Acked-by:
Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Arnd Bergmann authored
commit 67a3b63a upstream. gcc-8 points out a condition that almost certainly doesn't do what the author had in mind: drivers/gpu/drm/gma500/mdfld_intel_display.c: In function 'mdfldWaitForPipeEnable': drivers/gpu/drm/gma500/mdfld_intel_display.c:102:37: error: bitwise comparison always evaluates to false [-Werror=tautological-compare] This changes it to a simple bit mask operation to check whether the bit is set. Fixes: 026abc33 ("gma500: initial medfield merge") Signed-off-by:
-
Sultan Alsawaf authored
commit 000ade80 upstream. By passing a limit of 2 bytes to strncat, strncat is limited to writing fewer bytes than what it's supposed to append to the name here. Since the bounds are checked on the line above this, just remove the string bounds checks entirely since they're unneeded. Signed-off-by:
Sultan Alsawaf <sultanxda@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Guenter Roeck authored
commit 166126c1 upstream. gcc 8.1.0 complains: fs/kernfs/symlink.c:91:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length fs/kernfs/symlink.c: In function 'kernfs_iop_get_link': fs/kernfs/symlink.c:88:14: note: length computed here Using strncpy() is indeed less than perfect since the length of data to be copied has already been determined with strlen(). Replace strncpy() with memcpy() to address the warning and optimize the code a little. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Linus Torvalds authored
commit 38c7b224 upstream. New versions of gcc reasonably warn about the odd pattern of strncpy(p, q, strlen(q)); which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case. There was a comment about _why_ the code used strncpy - to avoid the terminating NUL byte, but memcpy does the same and avoids the warning. Signed-off-by:
-
Takashi Iwai authored
commit c288248f upstream. hdmi_lpe_audio_probe() copies the pcm name string via strncpy(), but as a gcc8 warning suggests, it misses a NUL terminator, and unlikely the expected result. Use the proper one, strlcpy() instead. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Guenter Roeck authored
commit 77d2a24b upstream. gcc 8.1.0 complains: lib/kobject.c:128:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] lib/kobject.c: In function 'kobject_get_path': lib/kobject.c:125:13: note: length computed here Using strncpy() is indeed less than perfect since the length of data to be copied has already been determined with strlen(). Replace strncpy() with memcpy() to address the warning and optimize the code a little. Signed-off-by:
-
Linus Torvalds authored
commit b1286ed7 upstream. New versions of gcc reasonably warn about the odd pattern of strncpy(p, q, strlen(q)); which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case. Apparently there was a patch for this floating around earlier, but it got lost. Acked-again-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Stephen Rothwell authored
commit 217c3e01 upstream. They are too noisy Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Xiongfeng Wang authored
commit 321cb030 upstream. gcc-8 reports many -Wpacked-not-aligned warnings. The below are some examples. ./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct ceph_entity_addr' is less than 8 [-Wpacked-not-aligned] } __attribute__ ((packed)); ./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct ceph_entity_addr' is less than 8 [-Wpacked-not-aligned] } __attribute__ ((packed)); ./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct ceph_entity_addr' is less than 8 [-Wpacked-not-aligned] } __attribute__ ((packed)); This patch suppresses this kind of warnings for default setting. Signed-off-by:
Xiongfeng Wang <xiongfeng.wang@linaro.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
- 05 Dec, 2018 14 commits
-
-
Greg Kroah-Hartman authored
-
Jaegeuk Kim authored
commit 89d13c38 upstream. This patch fixes missing up_read call. Fixes: c9b60788 ("f2fs: fix to do sanity check with block address in main area") Cc: <stable@vger.kernel.org> # 4.19+ Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Ilya Dryomov authored
commit 130f52f2 upstream. Avoid scribbling over memory if the received reply/challenge is larger than the buffer supplied with the authorizer. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit f1d10e04 upstream. Allow for extending ceph_x_authorize_reply in the future. Signed-off-by:
-
Todd Kjos authored
commit 7bada55a upstream. Malicious code can attempt to free buffers using the BC_FREE_BUFFER ioctl to binder. There are protections against a user freeing a buffer while in use by the kernel, however there was a window where BC_FREE_BUFFER could be used to free a recently allocated buffer that was not completely initialized. This resulted in a use-after-free detected by KASAN with a malicious test program. This window is closed by setting the buffer's allow_user_free attribute to 0 when the buffer is allocated or when the user has previously freed it instead of waiting for the caller to set it. The problem was that when the struct buffer was recycled, allow_user_free was stale and set to 1 allowing a free to go through. Signed-off-by:
Todd Kjos <tkjos@google.com> Acked-by:
Arve Hjønnevåg <arve@android.com> Cc: stable <stable@vger.kernel.org> # 4.14 Signed-off-by:
-
YueHaibing authored
commit 6484a677 upstream. gcc '-Wunused-but-set-variable' warning: drivers/misc/mic/scif/scif_rma.c: In function 'scif_create_remote_lookup': drivers/misc/mic/scif/scif_rma.c:373:25: warning: variable 'vmalloc_num_pages' set but not used [-Wunused-but-set-variable] 'vmalloc_num_pages' should be used to determine if the address is within the vmalloc range. Fixes: ba612aa8 ("misc: mic: SCIF memory registration and unregistration") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Dexuan Cui authored
commit eceb0596 upstream. This is a longstanding issue: if the vmbus upper-layer drivers try to consume too many GPADLs, the host may return with an error 0xC0000044 (STATUS_QUOTA_EXCEEDED), but currently we forget to check the creation_status, and hence we can pass an invalid GPADL handle into the OPEN_CHANNEL message, and get an error code 0xc0000225 in open_info->response.open_result.status, and finally we hang in vmbus_open() -> "goto error_free_info" -> vmbus_teardown_gpadl(). With this patch, we can exit gracefully on STATUS_QUOTA_EXCEEDED. Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Yu Zhao authored
commit c1cb20d4 upstream. We changed the key of swap cache tree from swp_entry_t.val to swp_offset. We need to do so in shmem_replace_page() as well. Hugh said: "shmem_replace_page() has been wrong since the day I wrote it: good enough to work on swap "type" 0, which is all most people ever use (especially those few who need shmem_replace_page() at all), but broken once there are any non-0 swp_type bits set in the higher order bits" Link: http://lkml.kernel.org/r/20181121215442.138545-1-yuzhao@google.com Fixes: f6ab1f7f ("mm, swap: use offset of swap entry as key of swap cache") Signed-off-by:
Yu Zhao <yuzhao@google.com> Reviewed-by:
Matthew Wilcox <willy@infradead.org> Acked-by:
-
Luis Chamberlain authored
commit 5618cf03 upstream. We free the misc device string twice on rmmod; fix this. Without this we cannot remove the module without crashing. Link: http://lkml.kernel.org/r/20181124050500.5257-1-mcgrof@kernel.orgSigned-off-by:
Luis Chamberlain <mcgrof@kernel.org> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
-
Martin Kelly authored
commit fe5192ac upstream. Currently, we enable the device before we enable the device trigger. At high frequencies, this can cause interrupts that don't yet have a poll function associated with them and are thus treated as spurious. At high frequencies with level interrupts, this can even cause an interrupt storm of repeated spurious interrupts (~100,000 on my Beagleboard with the LSM9DS1 magnetometer). If these repeat too much, the interrupt will get disabled and the device will stop functioning. To prevent these problems, enable the device prior to enabling the device trigger, and disable the divec prior to disabling the trigger. This means there's no window of time during which the device creates interrupts but we have no trigger to answer them. Fixes: 90efe055 ("iio: st_sensors: harden interrupt handling") Signed-off-by:
Martin Kelly <martin@martingkelly.com> Tested-by:
Denis Ciocca <denis.ciocca@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Felipe Balbi authored
commit 38317f5c upstream. This reverts commit ffb80fc6. Turns out that commit is wrong. Host controllers are allowed to use Clear Feature HALT as means to sync data toggle between host and periperal. Cc: <stable@vger.kernel.org> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Michael Niewöhner authored
commit effd14f6 upstream. Cherry G230 Stream 2.0 (G85-231) and 3.0 (G85-232) need this quirk to function correctly. This fixes a but where double pressing numlock locks up the device completely with need to replug the keyboard. Signed-off-by:
Michael Niewöhner <linux@mniewoehner.de> Tested-by:
-
Kai-Heng Feng authored
commit a84a1bcc upstream. There are two new Realtek card readers require ums-realtek to work correctly. Add the new IDs to support them. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Larry Finger authored
commit 8561fb31 upstream. With Androidx86 8.1, wificond returns "failed to get nl80211_sta_info_tx_failed" and wificondControl returns "Invalid signal poll result from wificond". The fix is to OR sinfo->filled with BIT_ULL(NL80211_STA_INFO_TX_FAILED). This missing bit is apparently not needed with NetworkManager, but it does no harm in that case. Reported-and-Tested-by:
youling257 <youling257@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: youling257 <youling257@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
