Proposed in:

https://lore.kernel.org/lkml/20210517140931.2559364-1-tmricht@linux.ibm.com/Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210519151213.2643570-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The for_each_shell_test macro iterated over all shell tests in the
directory using readdir, which does not guarantee any ordering, causing
problems on certain fs. However, the order in which they are visited
determines the id of the test, in case one wants to run a single test.

This patch replaces readdir with scandir using alphabetical sorting.
This guarantees that, given the same set of tests, all machines will
see the tests in the same order, and, thus, that test ids are
consistent.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Reported-by: Ian Rogers <irogers@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Link: http://lore.kernel.org/lkml/20210525230521.244553-1-rickyman7@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When run as normal user with default sysctl kernel.kptr_restrict=0
and kernel.perf_event_paranoid=2, perf probe fails with:

  $ ./perf probe move_page_tables
  Relocated base symbol is not found!

The warning message is not much informative. The reason perf fails
is because /proc/kallsyms is restricted by perf_event_paranoid=2
for normal user and thus perf fails to read relocated address of
the base symbol.

Tweaking kptr_restrict and perf_event_paranoid can change the
behavior of perf probe. Also, running as root or privileged user
works too. Add these details in the warning message.

Plus, kmap->ref_reloc_sym might not be always set even if
host_machine is initialized. Above is the example of the same.
Remove that comment.
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210525043744.193297-1-ravi.bangoria@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

During a perf build with O= bison stores full paths in generated files
and those paths are stored in resulting perf binary.

Starting from bison v3.7.1 those paths can be remapped by using the
--file-prefix-map option.  Use this option if possible to make perf
binary more reproducible.
Signed-off-by: Denys Zagorui <dzagorui@cisco.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210524111514.65713-3-dzagorui@cisco.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When PERF_RECORD_MISC_MMAP_BUILD_ID is set, the event has a build-id
of the DSO already so no need to add it again.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210524225051.1190486-2-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Otherwise it'll leak the refcount for the DSO.  As dso__put() can
handle a NULL dso pointer, we can just call it unconditionally.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210524225051.1190486-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

As an example, add branch information to intel-pt-events.py script.
This shows how a simple python script can be used to customize
perf script output for Intel PT branch traces or power event traces.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-11-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add auxtrace_error to general python scripting.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-10-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add context_switch to general python scripting.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-9-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add cpumode to python scripting.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-8-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add IPC to python scripting.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-7-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add sample flags to python scripting.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-6-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Factor out perf_sample__sprintf_flags() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-5-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If sample addr correlates to a symbol, add  "addr_dso", "addr_symbol", and
"addr_symoff" to python scripting.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-4-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Factor out set_sym_in_dict() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-3-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tuple_set_u64() produces a signed value instead of an unsigned value.
That works for database export but not other cases. Rename to
tuple_set_d64() for database export and fix tuple_set_u64().

Fixes: df919b40 ("perf scripting python: Extend interface to export data in a database-friendly way")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-2-adrian.hunter@intel.com

As we'll use it in the upcoming python interfaces and when built with:

                make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1
  +NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
  make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1
  +NO_SYSCALL_TABLE=1
    BUILD:   Doing 'make -j24' parallel build
  <SNIP>
    CC      /tmp/tmp.rGrdpQlTCr/builtin-daemon.o
  In file included from util/events_stats.h:8,
                   from util/evlist.h:12,
                   from builtin-script.c:18:
  builtin-script.c: In function ‘process_auxtrace_error’:
  util/auxtrace.h:708:57: error: called object is not a function or function pointer
    708 | #define perf_event__process_auxtrace_error              0
        |                                                         ^
  builtin-script.c:2443:16: note: in expansion of macro ‘perf_event__process_auxtrace_error’
   2443 |         return perf_event__process_auxtrace_error(session, event);
        |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    MKDIR   /tmp/tmp.rGrdpQlTCr/tests/
    MKDIR   /tmp/tmp.rGrdpQlTCr/bench/
    CC      /tmp/tmp.rGrdpQlTCr/tests/builtin-test.o
    CC      /tmp/tmp.rGrdpQlTCr/bench/sched-messaging.o
  builtin-script.c:2444:1: error: control reaches end of non-void function [-Werror=return-type]
   2444 | }
        | ^

To: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Allow perf script to find a script in the exec path.

Example:

Before:

 $ perf record -a -e intel_pt/branch=0/ sleep 0.1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.954 MB perf.data ]
 $ perf script intel-pt-events.py 2>&1 | head -3
   Error: Couldn't find script `intel-pt-events.py'
   See perf script -l for available scripts.
 $ perf script -s intel-pt-events.py 2>&1 | head -3
 Can't open python script "intel-pt-events.py": No such file or directory
 $ perf script ~/libexec/perf-core/scripts/python/intel-pt-events.py 2>&1 | head -3
   Error: Couldn't find script `/home/ahunter/libexec/perf-core/scripts/python/intel-pt-events.py'
   See perf script -l for available scripts.
 $

After:

 $ perf script intel-pt-events.py 2>&1 | head -3
 Intel PT Power Events and PTWRITE
            perf  8123/8123  [000]       551.230753986     cbr:  42  freq: 4219 MHz  (156%)                0 [unknown] ([unknown])
            perf  8123/8123  [001]       551.230808216     cbr:  42  freq: 4219 MHz  (156%)                0 [unknown] ([unknown])
 $ perf script -s intel-pt-events.py 2>&1 | head -3
 Intel PT Power Events and PTWRITE
            perf  8123/8123  [000]       551.230753986     cbr:  42  freq: 4219 MHz  (156%)                0 [unknown] ([unknown])
            perf  8123/8123  [001]       551.230808216     cbr:  42  freq: 4219 MHz  (156%)                0 [unknown] ([unknown])
 $ perf script ~/libexec/perf-core/scripts/python/intel-pt-events.py 2>&1 | head -3
 Intel PT Power Events and PTWRITE
            perf  8123/8123  [000]       551.230753986     cbr:  42  freq: 4219 MHz  (156%)                0 [unknown] ([unknown])
            perf  8123/8123  [001]       551.230808216     cbr:  42  freq: 4219 MHz  (156%)                0 [unknown] ([unknown])
 $
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210524065718.11421-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The option "opts->full_auxtrace" is checked at the earlier place, if it
is false the function will directly bail out.  So remove the redundant
checking for "opts->full_auxtrace".
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519041546.1574961-5-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

For per-cpu mmap, it should enable timestamp tracing for Arm SPE; this
is helpful for samples correlation.

To automatically enable the timestamp, a helper arm_spe_set_timestamp()
is introduced for setting "ts_enable" format bit.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210519041546.1574961-4-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The dummy event is mainly used for mmap, the TIME sample is only needed
for per-cpu case so that the perf tool can rely on the correct timing
for parsing symbols.  And the CPU sample is useless for mmap.

The BRANCH_STACK sample bit will be always reset for the dummy event in
the function evsel__config(), so don't need to repeatedly reset it for
Arm SPE specific.

So this patch only enables TIME sample for per-cpu mmap.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519041546.1574961-3-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Now it's hard code to set sample flags for CPU, TIME and TID for SPE
event, which is pointless.

The CPU is useful for sampling only for per-mmap case, it is used to
indicate the AUX trace is associated to which CPU.

The TIME sample is not needed for AUX event, since the time for AUX
event is not really used and this time is a different thing from the
timestamp in Arm SPE trace, the timestamp tracing which is controlled
by Arm SPE's config bit.

The TID sample is not useful for AUX event.

This patch corrects the sample flags for SPE event, it only set CPU
sample bit for per-cpu mmap case.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519041546.1574961-2-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

- Update core and uncore events for Icelake client to perf.
- Add ICL metrics.

Based on ICL event list v1.10:

  https://download.01.org/perfmon/ICL/Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c0f27643-bebb-2912-56ed-f7abec7dbde3@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add JSON metrics for Icelake Server to perf.

Based on TMA metrics 4.21 at 01.org.:

  https://download.01.org/perfmon/Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c0f27643-bebb-2912-56ed-f7abec7dbde3@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add JSON uncore events for Icelake Server to perf.

Based on JSON list v1.04:

  https://download.01.org/perfmon/ICX/Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c0f27643-bebb-2912-56ed-f7abec7dbde3@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add JSON core events for Icelake Server to perf.

Based on JSON list v1.04:

  https://download.01.org/perfmon/ICX/Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c0f27643-bebb-2912-56ed-f7abec7dbde3@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick up fixes from perf/urgent.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-tools-fixes-for-v5.13-2021-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool fixes from Arnaldo Carvalho de Melo:

 - Fix 'perf script' decoding of Intel PT traces for abort handling and
   sample instruction bytes.

 - Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit to Intel PT
   'perf script' decoder.

 - Fixes for the python based Intel PT trace viewer GUI.

 - Sync UAPI copies (unwire quotactl_path, some comment fixes).

 - Fix handling of missing kernel software events, such as the recently
   added 'cgroup-switches', and add the trivial glue for it in the
   tooling side, since it was added in this merge window.

 - Add missing initialization of zstd_data in 'perf buildid-list',
   detected with valgrind's memcheck.

 - Remove needless event enable/disable when all events uses BPF.

 - Fix libpfm4 support (63) test error for nested event groups.

* tag 'perf-tools-fixes-for-v5.13-2021-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf stat: Skip evlist__[enable|disable] when all events uses BPF
  perf script: Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit
  perf scripts python: exported-sql-viewer.py: Fix warning display
  perf scripts python: exported-sql-viewer.py: Fix Array TypeError
  perf scripts python: exported-sql-viewer.py: Fix copy to clipboard from Top Calls by elapsed Time report
  tools headers UAPI: Sync files changed by the quotactl_path unwiring
  tools headers UAPI: Sync linux/perf_event.h with the kernel sources
  tools headers UAPI: Sync linux/fs.h with the kernel sources
  perf parse-events: Check if the software events array slots are populated
  perf tools: Add 'cgroup-switches' software event
  perf intel-pt: Remove redundant setting of ptq->insn_len
  perf intel-pt: Fix sample instruction bytes
  perf intel-pt: Fix transaction abort handling
  perf test: Fix libpfm4 support (63) test error for nested event groups
  tools arch kvm: Sync kvm headers with the kernel sources
  perf buildid-list: Initialize zstd_data

Pull cgroup fixes from Tejun Heo:

 - "cgroup_disable=" boot param was being applied too late confusing
   some subsystems. Fix it by moving application to __setup() time.

 - Comment spelling fixes. Included here to lower the chance of trivial
   future merge conflicts.

* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fix spelling mistakes
  cgroup: disable controllers at parse time

Pull workqueue fix from Tejun Heo:
 "One commit to fix spurious workqueue stall warnings across VM
  suspensions"

* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  wq: handle VM suspension in stall detection

Pull spi fixes from Mark Brown:
 "There's some device specific fixes here but also an unusually large
  number of fixes for the core, including both fixes for breakage
  introduced on ACPI systems while fixing the long standing confusion
  about the polarity of GPIO chip selects specified through DT, and
  fixes for ordering issues on unregistration which have been exposed
  through the wider usage of devm_."

* tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: sc18is602: implement .max_{transfer,message}_size() for the controller
  spi: sc18is602: don't consider the chip select byte in sc18is602_check_transfer
  MAINTAINERS: Add Alain Volmat as STM32 SPI maintainer
  dt-bindings: spi: spi-mux: rename flash node
  spi: Don't have controller clean up spi device before driver unbind
  spi: Assume GPIO CS active high in ACPI case
  spi: sprd: Add missing MODULE_DEVICE_TABLE
  spi: Switch to signed types for *_native_cs SPI controller fields
  spi: take the SPI IO-mutex in the spi_set_cs_timing method
  spi: spi-fsl-dspi: Fix a resource leak in an error handling path
  spi: spi-zynq-qspi: Fix stack violation bug
  spi: spi-zynq-qspi: Fix kernel-doc warning
  spi: altera: Make SPI_ALTERA_CORE invisible
  spi: Fix spi device unregister flow

Fix some spelling mistakes in comments:
hierarhcy ==> hierarchy
automtically ==> automatically
overriden ==> overridden
In absense of .. or ==> In absence of .. and
assocaited ==> associated
taget ==> target
initate ==> initiate
succeded ==> succeeded
curremt ==> current
udpated ==> updated
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull perf fixes from Thomas Gleixner:
 "Two perf fixes:

   - Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as
     this can cause malfunction when TOS is not supported

   - Allocate the LBR XSAVE buffers along with the DS buffers upfront
     because allocating them when adding an event can deadlock"

* tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context
  perf/x86: Avoid touching LBR_TOS MSR for Arch LBR

Pull locking fixes from Thomas Gleixner:
 "Two locking fixes:

   - Invoke the lockdep tracepoints in the correct place so the ordering
     is correct again

   - Don't leave the mutex WAITER bit stale when the last waiter is
     dropping out early due to a signal as that forces all subsequent
     lock operations needlessly into the slowpath until it's cleaned up
     again"

* tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
  locking/lockdep: Correct calling tracepoints

Pull irq fixes from Thomas Gleixner:
 "A few fixes for irqchip drivers:

   - Allocate interrupt descriptors correctly on Mainstone PXA when
     SPARSE_IRQ is enabled; otherwise the interrupt association fails

   - Make the APPLE AIC chip driver depend on APPLE

   - Remove redundant error output on devm_ioremap_resource() failure"

* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: Remove redundant error printing
  irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
  ARM: PXA: Fix cplds irqdesc allocation when using legacy mode

Pull x86 fixes from Borislav Petkov:

 - Fix how SEV handles MMIO accesses by forwarding potential page faults
   instead of killing the machine and by using the accessors with the
   exact functionality needed when accessing memory.

 - Fix a confusion with Clang LTO compiler switches passed to the it

 - Handle the case gracefully when VMGEXIT has been executed in
   userspace

* tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Use __put_user()/__get_user() for data accesses
  x86/sev-es: Forward page-faults which happen during emulation
  x86/sev-es: Don't return NULL from sev_es_get_ghcb()
  x86/build: Fix location of '-plugin-opt=' flags
  x86/sev-es: Invalidate the GHCB after completing VMGEXIT
  x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch

Pull powerpc fixes from Michael Ellerman:

 - Fix breakage of strace (and other ptracers etc.) when using the new
   scv ABI (Power9 or later with glibc >= 2.33).

 - Fix early_ioremap() on 64-bit, which broke booting on some machines.

Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and
Christophe Leroy.

* tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
  powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
  powerpc: Fix early setup to make early_ioremap() work

Merge tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix short log indentation for tools builds

 - Fix dummy-tools to adjust to the latest stackprotector check

* tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: dummy-tools: adjust to stricter stackprotector check
  scripts/jobserver-exec: Fix a typo ("envirnoment")
  tools build: Fix quiet cmd indentation

Merge misc fixes from Andrew Morton:
 "10 patches.

  Subsystems affected by this patch series: mm (pagealloc, gup, kasan,
  and userfaultfd), ipc, selftests, watchdog, bitmap, procfs, and lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  userfaultfd: hugetlbfs: fix new flag usage in error path
  lib: kunit: suppress a compilation warning of frame size
  proc: remove Alexey from MAINTAINERS
  linux/bits.h: fix compilation error with GENMASK
  watchdog: reliable handling of timestamps
  kasan: slab: always reset the tag in get_freepointer_safe()
  tools/testing/selftests/exec: fix link error
  ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
  Revert "mm/gup: check page posion status for coredump."
  mm/shuffle: fix section mismatch warning