- 22 Mar, 2020 1 commit
-
-
Qiang Yu authored
When task fail, we can find its process with this information. Tested-by:
Andreas Baierl <ichgeh@imkreisrum.de> Reviewed-by:
Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200222024210.18697-2-yuq825@gmail.com
-
- 21 Mar, 2020 2 commits
-
-
Geert Uytterhoeven authored
mipi_dbi_command_stackbuf() copies the passed buffer data, so it can be const. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200316164249.6234-1-geert+renesas@glider.be
-
Sam Ravnborg authored
Fix a few grammar/editorial issues spotted by Laurent Pinchart. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200314153047.2486-4-sam@ravnborg.org
-
- 20 Mar, 2020 10 commits
-
-
Tomi Valkeinen authored
Remove unused writeback code. This code will never be used, as omapfb is being deprecated. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200313122410.7528-1-tomi.valkeinen@ti.com
-
Randy Dunlap authored
When 'VIAFB_DEBUG' and 'VIAFB_WARN' are not defined, modify the DEBUG_MSG() &WARN_MSG() macros to use the no_printk() macro instead of using <empty>. This fixes a build warning when -Wextra is used and provides printk format checking: ../drivers/video/fbdev/via/ioctl.c:88:47: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] Also use %lu to print an unsigned long instead of just %l, to fix a printk format warning: ../drivers/video/fbdev/via/viafbdev.c: In function ‘viafb_dvp0_proc_write’: ../drivers/video/fbdev/via/viafbdev.c:1148:14: warning: unknown conversion type character ‘]’ in format [-Wformat=] DEBUG_MSG("DVP0:reg_val[%l]=:%x\n", i, Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Randy Dunlap authored
When 'DEBUG' is not defined, modify the DPRINTK() macro to use the no_printk() macro instead of using <empty>. This fixes build warnings when -Wextra is used and provides printk format checking: ../drivers/video/fbdev/pm2fb.c:227:38: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../drivers/video/fbdev/pm3fb.c:1039:33: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] Also drop one argument in two DPRINTK() macro uses to provide the correct number of arguments and use the correct field in one case to fix a build error: ../drivers/video/fbdev/pm3fb.c:353:9: error: ‘struct fb_info’ has no member named ‘current_par’ info->current_par->depth); Signed-off-by: -
Randy Dunlap authored
When 'SAVAGEFB_DEBUG' is not defined, modify the DBG() macro to use the no_printk() macro instead of using <empty>. This fixes a build warning when -Wextra is used and provides printk format checking: ../drivers/video/fbdev/savage/savagefb_driver.c:2411:13: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Signed-off-by:
-
Randy Dunlap authored
When 'DEBUG' is not defined, modify the dprintk() macro to use the no_printk() macro instead of using <empty>. This fixes build warnings when -Wextra is used and provides printk format checking: ../drivers/video/fbdev/matrox/matroxfb_base.c:635:77: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../drivers/video/fbdev/matrox/matroxfb_Ti3026.c:632:54: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] ../drivers/video/fbdev/matrox/matroxfb_Ti3026.c:654:53: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] Signed-off-by:
-
Randy Dunlap authored
When 'DEBUG' is not defined, modify the DPRINTK() macro to use the no_printk() macro instead of using <empty>. This fixes a build warning when -Wextra is used and provides printk format checking: ../drivers/video/fbdev/aty/atyfb_base.c:784:61: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Signed-off-by:
-
Randy Dunlap authored
When 'DEBUG' is not defined, modify the DPRINTK() macro to use the no_printk() macro instead of using <empty>. This fixes a build warning when -Wextra is used and provides printk format checking: ../drivers/video/fbdev/core/fbmon.c:812:47: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../drivers/video/fbdev/core/fbmon.c:842:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] ../drivers/video/fbdev/core/fbmon.c:847:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by:
-
- 19 Mar, 2020 1 commit
-
-
Jiri Slaby authored
After commit f651c8b0 ("drm/virtio: factor out the sg_table from virtio_gpu_object"), virtio_gpu_create_object allocates too small space to fit everything in. It is because it allocates struct virtio_gpu_object, but should allocate a newly added struct virtio_gpu_object_shmem which has 2 more members. So fix that by using correct type in virtio_gpu_create_object. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Link: http://patchwork.freedesktop.org/patch/msgid/20200319100421.16267-1-jslaby@suse.cz Fixes: f651c8b0 ("drm/virtio: factor out the sg_table from virtio_gpu_object") Cc: Gurchetan Singh <gurchetansingh@chromium.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
- 18 Mar, 2020 26 commits
-
-
Ville Syrjälä authored
drm_mode_config_init() may not have been called when the driver/device doesn't support modeset. That will cause drm_mode_config_validate() to oops. Skip the validation for !modeset. TODO: We may want to consider calling drm_mode_config_init() unconditionally to avoid similar issues elsewhere... Fixes: 74d2aacb ("drm: Validate encoder->possible_clones") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200318182518.31618-1-ville.syrjala@linux.intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Daniel Vetter authored
We're getting some random other stuff that we're not really interested in, so match only word boundaries. Also avoid the capture group while at it. Suggested by Joe Perches. Acked-by:
Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Cc: Joe Perches <joe@perches.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200317205643.1028398-1-daniel.vetter@ffwll.ch
-
Wambui Karuga authored
As a result of commit 987d65d0 (drm: debugfs: make drm_debugfs_create_files() never fail) and changes to various debugfs functions in drm/core and across various drivers, there is no need for the drm_driver.debugfs_init() hook to have a return value. Therefore, declare it as void. This also includes refactoring all users of the .debugfs_init() hook to return void across the subsystem. v2: include changes to the hook and drivers that use it in one patch to prevent driver breakage and enable individual successful compilation of this change. References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.htmlSigned-off-by:
Wambui Karuga <wambui.karugax@gmail.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200310133121.27913-18-wambui.karugax@gmail.com
-
Ville Syrjälä authored
WARN if the encoder possible_crtcs is effectively empty or contains bits for non-existing crtcs. v2: Move to drm_mode_config_validate() (Daniel) Make the docs say we WARN when this is wrong (Daniel) Extract full_crtc_mask() Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: -
Ville Syrjälä authored
Many drivers are populating encoder->possible_clones wrong. Let's persuade them to get it right by adding some loud WARNs. We'll cross check the bits between any two encoders. So either both encoders can clone with the other, or neither can. We'll also complain about effectively empty possible_clones, and possible_clones containing bits for encoders that don't exist. v2: encoder->possible_clones now includes the encoder itelf v3: Move to drm_mode_config_validate() (Daniel) Document that you get a WARN when this is wrong (Daniel) Extract full_encoder_mask() v4: !! instead of ! (Daniel) Acked-by:Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Ville Syrjälä authored
It's not at all clear what cloning options this driver supports. So let's just clear possible_clones instead of setting it to some bogus value. v2: Adjust the FIXME (Daniel) Cc: Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
-
Ville Syrjälä authored
I doubt the DP+DP and SDVO+SDVO cloning works for this driver. i915 at least doesn't do those. Truthfully there could be some very specific circumstances where some of them would do doable, but genereally it's too much pain to deal with so we've chose not to bother. Let's use the same approach for gma500. Also the LVDS+LVDS and DSI+DSI cases probably don't really exist as there is one of each at most. This does mean we'll now leave possible_clones at 0 for these encoder types whereas previosuly we included the encoder itself in the bitmask. But that's fine as the core now treaks 0 as a special case and adds the encoder itself into the final bitmask reported to userspace. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by:
-
Ville Syrjälä authored
The docs say possible_clones should always include the encoder itself. Since most drivers don't want to deal with the complexities of cloning let's allow them to set possible_clones=0 and instead we'll fix that up in the core. We can't put this special case into drm_encoder_init() because drivers will have to fill up possible_clones after adding all the relevant encoders. Otherwise they wouldn't know the proper encoder indexes to use. So we'll just do it just before registering the device. v2: Don't set the bit if possible_clones!=0 so that the validation (coming soon) will WARN (Thomas) Fix up the docs to allow possible_clones==0 (Daniel) .late_register() is too late, introduce drm_mode_config_validate() which gets called _before_ we register the char device (Daniel) Acked-by: -
Wambui Karuga authored
Since 987d65d0 (drm: debugfs: make drm_debugfs_create_files() never fail), there is no need to check the return value of drm_debugfs_create_files(). Therefore, remove remove unnecessary checks and error handling statement blocks for its return value. These changes also enable changing drm_debugfs_create_files() to return void. Signed-off-by:
-
Ville Syrjälä authored
Currently the DispID tile block gets parsed in drm_get_edid(), which is an odd place for it considering we parse nothing else there. Also this doesn't work for override EDIDs since drm_connector_update_edid_property() refuses to do its job twice in such cases. Thus we never update the tile property with results of the DispID tile block parsing during drm_get_edid(). To fix this let's just move the tile block parsing to happen during drm_connector_update_edid_property(), which is where we parse a bunch of other stuff as well (and where we update both the EDID and tile properties). Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Ville Syrjälä authored
Throw out the magic '5' from validate_displayid() and replace with the actual thing we mean sizeof(header)+checksum. Also rewrite the checksum loop to be less hard to parse for mere mortals. Signed-off-by:
-
Ville Syrjälä authored
The EDID extension block checksum byte is not part of the actual DispID data, so don't use it in validate_displayid(). Signed-off-by:
-
Ville Syrjälä authored
Currently the code assumes that the entire EDID extesion block can be taken up by the DispID blocks. That is not true. There is at least always the DispID checksum, and potentially fill bytes if the extension block uses the interior fill scheme to pad out to fill EDID block size. So let's not parse the checksum or the fill bytes as DispID blocks by having drm_find_displayid_extension() return the actual length of the DispID data to the caller. Signed-off-by:
-
Ville Syrjälä authored
Instead of everyone having to call validate_displayid() let's just have drm_find_displayid_extension() do it for them. Signed-off-by:
-
Ville Syrjälä authored
As with the byte offset (idx) drm_find_displayid_extension() is the only one who actually knows how much data the resulting DispID block can contain. So return the length from therein instead of assuming it's the EDID block length all over. Signed-off-by:
-
Ville Syrjälä authored
The fact that the DispID starts at byte offset 1 is due to the DispID coming from and EDID extension block (the first byte being the extesion block tag). Instead of hadrdocoding that idx==1 assumptions all over let's just have drm_find_displayid_extension() return it since it actually knows what it's talking about. If at some point someone comes across a DispID which is not embedded inside an EDID the function that returns the new type of DispID can return it's own byte offset without having to updated all the code. TODO: should probably just get rid of that idx thing altogether and just return the thing we want directly. Signed-off-by: -
Ville Syrjälä authored
A+B on the previous line, B+A on the next line. Brain hurts. Signed-off-by:
-
Ville Syrjälä authored
Make the topology id const since we don't want to change it. Signed-off-by:
-
Wambui Karuga authored
Since commit 987d65d0 (drm: debugfs: make drm_debugfs_create_files() never fail), drm_debugfs_create_files() never fails and should return void. Therefore, remove its use as the return value of various debugfs_init() functions in drm, and have these functions return 0 directly. v2: convert debugfs_init() functions to return 0 instead of void to avoid build breakage. References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.htmlSigned-off-by:
-
Wambui Karuga authored
Since commit 987d65d0 (drm: debugfs: make drm_debugfs_create_files() never fail), drm_debugfs_create_files() never fails and should return void. Therefore, remove its use as the return value of debugfs_init() functions and have the functions return void. v2: convert intel_display_debugfs_register() stub to return void too. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Wambui Karuga authored
Since 987d65d0 (drm: debugfs: make drm_debugfs_create_files() never fail), there is no need to ever check the return value for drm_debugfs_create_files(). Therefore remove the checks for the return value and subsequent error handling in omap_debugfs_init(). These changes also enables the changing of omap_debugfs_init() to return 0 directly. v2: convert omap_debugfs_init() to return 0 instead of void to avoid introduction of build issues and enable individual driver compilation. References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.htmlSigned-off-by:
-
Wambui Karuga authored
Since 987d65d0 (drm: debugfs: make drm_debugfs_create_files() never fail) drm_debugfs_create_files() should return void. Therefore, remove its use as the return value in pl111_debugfs_init(), and have the function return 0 directly. v2: have pl111_debugfs_init() return 0 instead of void to avoid build breakage for individual compilation. References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.htmlSigned-off-by:
-
Wambui Karuga authored
Since 987d65d0 (drm: debugfs: make drm_debugfs_create_files() never fail), there is no need to ever check for the the return value of debugfs_create_file() and drm_debugfs_create_files(). Therefore, remove unnecessary checks and error handling in nouveau_drm_debugfs_init() and have the function return 0 directly. v2: have nouveau_drm_debugfs_init() return 0 instead of void so as not to introduce any build warnings to enable individual patch compilation. References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.htmlSigned-off-by:
-
Wambui Karuga authored
Since 987d65d0 (drm: debugfs: make drm_debugfs_create_files() never fail), drm_debugfs_create_files() never fails and should return void. Therefore, remove its use as the return value of drm_vram_mm_debugfs_init(), and have the function return 0 directly. v2: have drm_vram_mm_debugfs_init() return 0 instead of void to avoid introducing build issues and build breakage. References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.htmlSigned-off-by:
-
Wambui Karuga authored
Since commit 987d65d0 (drm: debugfs: make drm_debugfs_create_files() never fail), drm_debugfs_create_files() never fails, and should return void. This change therefore removes it uses as a return value in various functions across drm/sti. With these changes, the affected functions have been changed to use a void return value. v2: convert sti_mixer_debugfs_init() and sti_compositor_debugfs_init() to return void too. Also have sti_drm_dbg_init() to return 0 to avoid build issues. References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.htmlSigned-off-by:
-
Wambui Karuga authored
Since commit 987d65d0 (drm: debugfs: make drm_debugfs_create_files() never fail), drm_debugfs_create_files never fails and only returns 0. Therefore, the unnecessary checks for its return value and error handling in various debugfs_init() functions in drm/msm and have the functions return 0 directly. v2: have debug functions return 0 instead of void to avoid build breakage and ensure standalone compilation. References: https://lists.freedesktop.org/archives/dri-devel/2020-February/257183.htmlSigned-off-by:
-
