- 15 Aug, 2024 5 commits
-
-
Val Packett authored
The RK3066 does have RGB display output, so it should be marked as such. Fixes: f4a6de85 ("drm: rockchip: vop: add rk3066 vop definitions") Cc: stable@vger.kernel.org Signed-off-by:
Val Packett <val@packett.cool> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240624204054.5524-3-val@packett.cool
-
Val Packett authored
The RK3066 VOP sets a dma_stop bit when it's done scanning out a frame and needs the driver to acknowledge that by clearing the bit. Unless we clear it "between" frames, the RGB output only shows noise instead of the picture. atomic_flush is the place for it that least affects other code (doing it on vblank would require converting all other usages of the reg_lock to spin_(un)lock_irq, which would affect performance for everyone). This seems to be a redundant synchronization mechanism that was removed in later iterations of the VOP hardware block. Fixes: f4a6de85 ("drm: rockchip: vop: add rk3066 vop definitions") Cc: stable@vger.kernel.org Signed-off-by:
-
Cristian Ciocaltea authored
Driver makes use of the BIT() macro, but relies on the bits header being implicitly included. Explicitly pull the header in to avoid potential build failures in some configurations. While at it, reorder include directives alphabetically. Signed-off-by:
Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Signed-off-by:
-
Christophe JAILLET authored
'struct drm_encoder_helper_funcs' is not modified in these drivers. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 7458 552 0 8010 1f4a drivers/gpu/drm/rockchip/analogix_dp-rockchip.o After: ===== text data bss dec hex filename 7578 424 0 8002 1f42 drivers/gpu/drm/rockchip/analogix_dp-rockchip.o Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Dragan Simic authored
Clean up a few logged messages, which were previously worded as rather incomplete sentences separated by periods. This was both a bit unreadable and grammatically incorrect, so convert them into partial sentences separated (or connected) by semicolons, together with some wording improvements. Signed-off-by:
Dragan Simic <dsimic@manjaro.org> Reviewed-by:
Andy Yan <andyshrk@163.com> Signed-off-by:
-
- 14 Aug, 2024 4 commits
-
-
Jani Nikula authored
drm_edid_block_valid() is no longer used outside of drm_edid.c. Make it static. Acked-by:
Zhi Wang <zhiwang@kernel.rog> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240812142849.1588006-2-jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Jani Nikula authored
We'll want to stop drm_edid_block_valid() usage. KVMGT is the last user. Replace with drm_edid_valid(), which unfortunately requires an allocated drm_edid. However, on the plus side, this would be required to handle the TODO comment about EDID extension block support. Acked-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812142849.1588006-1-jani.nikula@intel.comSigned-off-by:
-
Jani Nikula authored
The dimensions are available in display info, so there's no need for raw EDID access. While at it, move the debug logging to where the EDID is actually read. Reviewed-by:
-
Jani Nikula authored
Debug printing at DisplayID validation leads to lots of log spamming as it's called at DisplayID iterators during EDID parsing. Remove it, and replace with a less noisy message at connector EDID update. Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240606123503.2825088-1-jani.nikula@intel.comSigned-off-by:
-
- 13 Aug, 2024 16 commits
-
-
Vignesh Raman authored
Uprev mesa to adapt to the latest changes in mesa ci. Project 'anholt/deqp-runner' was moved to 'mesa/deqp-runner'. So update the link. Signed-off-by:
Vignesh Raman <vignesh.raman@collabora.com> Reviewed-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
Helen Koike <helen.koike@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240807082020.429434-1-vignesh.raman@collabora.com
-
WangYuli authored
GitHub Dependabot has issued the following alert: "Upgrade setuptools to version 70.0.0 or later. A vulnerability in the package_index module of pypa/setuptools versions up to 69.1.1 allows for remote code execution via its download functions. These functions, which are used to download packages from URLs provided by users or retrieved from package index servers, are susceptible to code injection. If these functions are exposed to user-controlled inputs, such as package URLs, they can execute arbitrary commands on the system. The issue is fixed in version 70.0. Severity: 8.8 / 10 (High) Attack vector: Network Attack complexity: Low Privileges required: None User interaction: Required Scope: Unchanged Confidentiality: High Integrity: High Availability: High CVE ID: CVE-2024-6345" To avoid disturbing everyone with the kernel repo hosted on GitHub, I suggest we upgrade our python dependencies once again to appease GitHub Dependabot. Link: https://github.com/dependabotSigned-off-by:
WangYuli <wangyuli@uniontech.com> Acked-by:
-
Tejas Vipin authored
Use multi style wrapped functions for mipi_dsi in the startek-kd070fhfid015 panel. Signed-off-by:
Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Tejas Vipin authored
Add more functions that can benefit from being multi style and mark older variants as deprecated to eventually convert all mipi_dsi functions to multi style. Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Dan Carpenter authored
This code has an issue because it loops until "i" is set to UINT_MAX but the test for failure assumes that "i" is set to zero. The result is that it will only print an error message if we succeed on the very last try. Reformat the loop to count forwards instead of backwards. Fixes: 22814751 ("drm/ast: astdp: Perform link training during atomic_enable") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
-
Zhang Zekun authored
hibmc_mm_init() has been removed since commit 28645ae0 ("drm/hisilicon/hibmc: Remove hibmc_ttm.c"), but remain the declaration untouched in the header files. So, let's remove this unused declaration. Signed-off-by:
Zhang Zekun <zhangzekun11@huawei.com> Reviewed-by:
-
Thomas Zimmermann authored
The output_poll_changed hook in struct drm_mode_config_funcs is unused. Remove it. The helper drm_client_dev_hotplug() implements the callback's functionality. Signed-off-by:
-
Thomas Zimmermann authored
The lastclose callback in struct drm_driver is unused. Remove it. Also update documentation. v2: - update to use drm_lastclose() - fix typo in documentation Signed-off-by:
-
Thomas Zimmermann authored
The function is unused. Remove it. Signed-off-by:
-
Thomas Zimmermann authored
The old callbacks lastclose and output_poll_changed are deprecated and unused. Remove them from the documentation. Signed-off-by:
-
Thomas Zimmermann authored
Replace the call to drm_fb_helper_output_poll_changed() with a call to drm_client_dev_hotplug(). It is equivalent in functionality, but uses the DRM client infrastructure. v2: - fix commit description Signed-off-by:
Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-6-tzimmermann@suse.de
-
Thomas Zimmermann authored
The output_poll_changed hook was only necessary before in-kernel DRM clients existed, but is now obsolete. The client code handles display hotplugging internally. v2: - fix commit description Signed-off-by:
-
Thomas Zimmermann authored
Remove the implementation of struct drm_driver.lastclose. The hook was only necessary before in-kernel DRM clients existed, but is now obsolete. The code in nouveau_vga_lastclose() is performed by drm_lastclose(). v2: - update commit description Signed-off-by:
-
Thomas Zimmermann authored
Remove the implementation of struct drm_driver.lastclose. The hook was only necessary before in-kernel DRM clients existed, but is now obsolete. The code in amdgpu_driver_lastclose_kms() is performed by drm_lastclose(). v2: - update commit message Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
Amdgpu and nouveau call vga_switcheroo_process_delayed_switch() from their lastclose callbacks. Call it from drm_lastclose(), so that the driver functions can finally be removed. Only PCI devices with enabled switcheroo do the delayed switching. The call has no effect on other hardware. v2: - move change to drm_lastclose() (Sima) - update docs for vga_switcheroo_process_delayed_switch() Signed-off-by:
-
Andy Shevchenko authored
Update header inclusions to follow IWYU (Include What You Use) principle. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
- 12 Aug, 2024 8 commits
-
-
Daniel Yang authored
Fix the unexpected indentation errors. drm_connector.c has some kerneldoc comments that were missing newlines. This results in the following warnings when running make htmldocs: ./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2344: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils] ./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2346: ERROR: Unexpected indentation. [docutils] ./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2368: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils] ./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2381: ERROR: Unexpected indentation. [docutils] Signed-off-by:
Daniel Yang <danielyangkang@gmail.com> Reviewed-by:
Shuah Khan <skhan@linuxfoundation.org> [hmahfooz: append drm/connector prefix] Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240809032350.226382-1-danielyangkang@gmail.com
-
Thomas Zimmermann authored
Get drm-misc-next to the state of v6.11-rc2. Signed-off-by: -
Mohammed Anees authored
This patch takes care of the following warnings during documentation compiling: ./include/uapi/drm/drm_mode.h:869: warning: Function parameter or struct member 'width' not described in 'drm_plane_size_hint' ./include/uapi/drm/drm_mode.h:869: warning: Function parameter or struct member 'height' not described in 'drm_plane_size_hint' Signed-off-by:
Mohammed Anees <pvmohammedanees2003@gmail.com> Signed-off-by:
-
Jocelyn Falempe authored
Now that kmsg dump callback has the description parameter, use it in the user panic screen. This is the string passed to panic(), like "VFS: Unable to mount root fs on xxx" or "Attempted to kill init! exitcode=0xxxx". It gives a hint on why the panic occurred, without being too cryptic. Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by:
-
Jocelyn Falempe authored
Move the copyright notice to the top of drm_panic.h, and add the missing Red Hat copyright notice. Suggested-by:
-
Jocelyn Falempe authored
drm_panic_[un]register() are only used by the core drm, and are not intended to be called by other drm drivers, so move their prototypes to drm_crtc_internal.h. Suggested-by:
-
Jocelyn Falempe authored
drm_panic_[un]register() are called only from the core drm, so there is no need to export them. Suggested-by:
-
Jocelyn Falempe authored
There is no space between the last word, and the punctuation mark in English. Suggested-by:
Diego Viola <diego.viola@gmail.com> Signed-off-by:
-
- 09 Aug, 2024 6 commits
-
-
Daniel Vetter authored
Merge tag 'drm-misc-next-2024-08-09' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: - remove Power Saving Policy property Core Changes: - update connector documentation CI: - add tests for mediatek, meson, rockchip Driver Changes: amdgpu: - revert support for Power Saving Policy property bridge: - lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR mgag200: - transparently support BMC outputs omapdrm: - use common helper for_each_endpoint_of_node() panel: - panel-edp: fix name for HKC MB116AN01 vkms: - clean up endianess warnings Signed-off-by:
-
Thomas Zimmermann authored
Mgag200's BMC connector tracks the status of an underlying physical connector and updates the BMC status accordingly. This functionality works around GNOME's settings app, which cannot handle multiple outputs on the same CRTC. The workaround is now obsolete as the VGA-BMC connector handles BMC support internally. Hence, remove the driver's code and the BMC output entirely. Signed-off-by:
-
Thomas Zimmermann authored
Move calls to stop and start BMC scanout from CRTC helpers to the VGA-BMC encoder's atomic_disable and atomic_enable. Makes the BMC scanout transparent to the CRTC. DRM's atomic helpers call an encoder's atomic_disable and atomic_enable helpers for all enabled encoders. The BMC stops scanning out the VGA signal if modeset disables the VGA encoder, and starts scanning out if the modeset enables the VGA encoder. Signed-off-by:
-
Thomas Zimmermann authored
Control the VIDRST pin from the VGA-BMC encoder's atomic_check and remove the respective code from CRTC. Makes the VIDRST functionality fully composable. The VIDRST pin allows an external clock source to control the SYNC signals of the Matrox chip. The functionality is part of the CRTC, but depends on the presence of the clock source. This is the case for some BMCs, so control the pin from the VGA-BMC output. Signed-off-by:
-
Thomas Zimmermann authored
The VGA-BMC connector selects the VGA output if a display has been attached to the physical connector. Otherwise it selects the BMC output. In any case, the connector status is set to 'detected', so that the userspace compositor displays to it. Depending on the setting, the connector's display modes either come from the VGA monitor's EDID or from an internal list of BMC-compatible modes. Signed-off-by:
-
Thomas Zimmermann authored
Duplicate VGA output to VGA-BMC output and update all code for Matrox server chips. The new output represents a VGA output that has a BMC attached to it. No functional changes so far. Signed-off-by:
-
- 08 Aug, 2024 1 commit
-
-
Daniel Vetter authored
Merge tag 'drm-misc-next-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: virtio: - Define DRM capset Cross-subsystem Changes: dma-buf: - heaps: Clean up documentation printk: - Pass description to kmsg_dump() Core Changes: CI: - Update IGT tests - Point upstream repo to GitLab instance modesetting: - Introduce Power Saving Policy property for connectors - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support panic: - Avoid build-time interference with framebuffer console docs: - Document Colorspace property scheduler: - Remove full_recover from drm_sched_start TTM: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory Driver Changes: amdgpu: - Support Power Saving Policy connector property ast: - astdp: Support AST2600 with VGA; Clean up HPD bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable gma500: - Update i2c terminology ivpu: - Add MODULE_FIRMWARE() lcdif: - Fix pixel clock loongson: - Use GEM refcount over TTM's mgag200: - Improve BMC handling - Support VBLANK intterupts nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's panel: - Shutdown fixes plus documentation - Refactor several drivers for better code sharing - boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus DT; Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor for code sharing sti: - Fix module owner stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: Fix transparency after disabling plane; Remove unused interrupt tegra: - Call drm_atomic_helper_shutdown() v3d: - Clean up perfmon vkms: - Clean up Signed-off-by:
-
