- 07 Dec, 2006 27 commits
-
-
Peter Zijlstra authored
In light of the recent pagefault and filemap_copy_from_user work I've gone through all the arch pagefault handlers to make sure the inc_preempt_count() 'feature' works as expected. Several sections of code (including the new filemap_copy_from_user) rely on the fact that faults do not take locks under increased preempt count. arch/x86_64 - good arch/powerpc - good arch/cris - fixed arch/i386 - good arch/parisc - fixed arch/sh - good arch/sparc - good arch/s390 - good arch/m68k - fixed arch/ppc - good arch/alpha - fixed arch/mips - good arch/sparc64 - good arch/ia64 - good arch/arm - fixed arch/um - good arch/avr32 - good arch/h8300 - NA arch/m32r - good arch/v850 - good arch/frv - fixed arch/m68knommu - NA arch/arm26 - fixed arch/sh64 - fixed arch/xtensa - good Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Paul Menage authored
When using numa=fake on non-NUMA hardware there is no benefit to having the alien caches, and they consume much memory. Add a kernel boot option to disable them. Christoph sayeth "This is good to have even on large NUMA. The problem is that the alien caches grow by the square of the size of the system in terms of nodes." Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Ravikiran G Thirumalai authored
Here's an attempt towards doing away with lock_cpu_hotplug in the slab subsystem. This approach also fixes a bug which shows up when cpus are being offlined/onlined and slab caches are being tuned simultaneously. http://marc.theaimsgroup.com/?l=linux-kernel&m=116098888100481&w=2 The patch has been stress tested overnight on a 2 socket 4 core AMD box with repeated cpu online and offline, while dbench and kernbench process are running, and slab caches being tuned at the same time. There were no lockdep warnings either. (This test on 2,6.18 as 2.6.19-rc crashes at __drain_pages http://marc.theaimsgroup.com/?l=linux-kernel&m=116172164217678&w=2 ) The approach here is to hold cache_chain_mutex from CPU_UP_PREPARE until CPU_ONLINE (similar in approach as worqueue_mutex) . Slab code sensitive to cpu_online_map (kmem_cache_create, kmem_cache_destroy, slabinfo_write, __cache_shrink) is already serialized with cache_chain_mutex. (This patch lengthens cache_chain_mutex hold time at kmem_cache_destroy to cover this). This patch also takes the cache_chain_sem at kmem_cache_shrink to protect sanity of cpu_online_map at __cache_shrink, as viewed by slab. (kmem_cache_shrink->__cache_shrink->drain_cpu_caches). But, really, kmem_cache_shrink is used at just one place in the acpi subsystem! Do we really need to keep kmem_cache_shrink at all? Another note. Looks like a cpu hotplug event can send CPU_UP_CANCELED to a registered subsystem even if the subsystem did not receive CPU_UP_PREPARE. This could be due to a subsystem registered for notification earlier than the current subsystem crapping out with NOTIFY_BAD. Badness can occur with in the CPU_UP_CANCELED code path at slab if this happens (The same would apply for workqueue.c as well). To overcome this, we might have to use either a) a per subsystem flag and avoid handling of CPU_UP_CANCELED, or b) Use a special notifier events like LOCK_ACQUIRE/RELEASE as Gautham was using in his experiments, or c) Do not send CPU_UP_CANCELED to a subsystem which did not receive CPU_UP_PREPARE. I would prefer c). Signed-off-by:
Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by:
Shai Fultheim <shai@scalex86.org> Signed-off-by:
-
Kevin Hilman authored
When CONFIG_SLAB_DEBUG is used in combination with ARCH_SLAB_MINALIGN, some debug flags should be disabled which depend on BYTES_PER_WORD alignment. The disabling of these debug flags is not properly handled when BYTES_PER_WORD < ARCH_SLAB_MEMALIGN < cache_line_size() This patch fixes that and also adds an alignment check to cache_alloc_debugcheck_after() when ARCH_SLAB_MINALIGN is used. Signed-off-by:
Kevin Hilman <khilman@mvista.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Chen, Kenneth W authored
Imprecise RSS accounting is an irritating ill effect with pt sharing. After consulted with several VM experts, I have tried various methods to solve that problem: (1) iterate through all mm_structs that share the PT and increment count; (2) keep RSS count in page table structure and then sum them up at reporting time. None of the above methods yield any satisfactory implementation. Since process RSS accounting is pure information only, I propose we don't count them at all for hugetlb page. rlimit has such field, though there is absolutely no enforcement on limiting that resource. One other method is to account all RSS at hugetlb mmap time regardless they are faulted or not. I opt for the simplicity of no accounting at all. Hugetlb page are special, they are reserved up front in global reservation pool and is not reclaimable. From physical memory resource point of view, it is already consumed regardless whether there are users using them. If the concern is that RSS can be used to control resource allocation, we already can specify hugetlb fs size limit and sysadmin can enforce that at mount time. Combined with the two points mentioned above, I fail to see if there is anything got affected because of this patch. Signed-off-by:
Ken Chen <kenneth.w.chen@intel.com> Acked-by:
Hugh Dickins <hugh@veritas.com> Cc: Dave McCracken <dmccr@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Adam Litke <agl@us.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Chen, Kenneth W authored
Following up with the work on shared page table done by Dave McCracken. This set of patch target shared page table for hugetlb memory only. The shared page table is particular useful in the situation of large number of independent processes sharing large shared memory segments. In the normal page case, the amount of memory saved from process' page table is quite significant. For hugetlb, the saving on page table memory is not the primary objective (as hugetlb itself already cuts down page table overhead significantly), instead, the purpose of using shared page table on hugetlb is to allow faster TLB refill and smaller cache pollution upon TLB miss. With PT sharing, pte entries are shared among hundreds of processes, the cache consumption used by all the page table is smaller and in return, application gets much higher cache hit ratio. One other effect is that cache hit ratio with hardware page walker hitting on pte in cache will be higher and this helps to reduce tlb miss latency. These two effects contribute to higher application performance. Signed-off-by:
-
Andrew Morton authored
Despaghettify balance_pdgat() a bit. Signed-off-by:
-
Nick Piggin authored
Add an arch_alloc_page to match arch_free_page. Signed-off-by:
-
Ashwin Chaugule authored
The new swap token patches replace the current token traversal algo. The old algo had a crude timeout parameter that was used to handover the token from one task to another. This algo, transfers the token to the tasks that are in need of the token. The urgency for the token is based on the number of times a task is required to swap-in pages. Accordingly, the priority of a task is incremented if it has been badly affected due to swap-outs. To ensure that the token doesnt bounce around rapidly, the token holders are given a priority boost. The priority of tasks is also decremented, if their rate of swap-in's keeps reducing. This way, the condition to check whether to pre-empt the swap token, is a matter of comparing two task's priority fields. [akpm@osdl.org: cleanups] Signed-off-by:
Ashwin Chaugule <ashwin.chaugule@celunite.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Ashwin Chaugule authored
Make sure the contention for the token happens _before_ any read-in and kicks the swap-token algo only when the VM is under pressure. Signed-off-by:
-
Nick Piggin authored
Some drivers are returning OOM when it is not in response to a memory shortage. Signed-off-by:
-
Nick Piggin authored
Don't cause all threads in all other thread groups to gain TIF_MEMDIE otherwise we'll get a thundering herd eating our memory reserve. This may not be the optimal scheme, but it fits our policy of allowing just one TIF_MEMDIE in the system at once. Signed-off-by:
-
Nick Piggin authored
Clean up the OOM killer messages to be more consistent. Signed-off-by:
-
Nick Piggin authored
Abort the kill if any of our threads have OOM_DISABLE set. Having this test here also prevents any OOM_DISABLE child of the "selected" process from being killed. Signed-off-by:
-
Paul Jackson authored
Rearrange the struct members in the 'struct zonelist_cache' structure, so as to put the readonly (once initialized) z_to_n[] array first, where it will come right after the zones[] array in struct zonelist. This pretty much eliminates the chance that the two frequently written elements of 'struct zonelist_cache', the fullzones bitmap and last_full_zap times, will end up on the same cache line as the performance sensitive, frequently read, never (after init) written zones[] array. Keeping frequently written data off frequently read cache lines is good for performance. Thanks to Rohit Seth for the suggestion. Signed-off-by:
Paul Jackson <pj@sgi.com> Cc: Rohit Seth <rohitseth@google.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Paul Jackson authored
Optimize the critical zonelist scanning for free pages in the kernel memory allocator by caching the zones that were found to be full recently, and skipping them. Remembers the zones in a zonelist that were short of free memory in the last second. And it stashes a zone-to-node table in the zonelist struct, to optimize that conversion (minimize its cache footprint.) Recent changes: This differs in a significant way from a similar patch that I posted a week ago. Now, instead of having a nodemask_t of recently full nodes, I have a bitmask of recently full zones. This solves a problem that last weeks patch had, which on systems with multiple zones per node (such as DMA zone) would take seeing any of these zones full as meaning that all zones on that node were full. Also I changed names - from "zonelist faster" to "zonelist cache", as that seemed to better convey what we're doing here - caching some of the key zonelist state (for faster access.) See below for some performance benchmark results. After all that discussion with David on why I didn't need them, I went and got some ;). I wanted to verify that I had not hurt the normal case of memory allocation noticeably. At least for my one little microbenchmark, I found (1) the normal case wasn't affected, and (2) workloads that forced scanning across multiple nodes for memory improved up to 10% fewer System CPU cycles and lower elapsed clock time ('sys' and 'real'). Good. See details, below. I didn't have the logic in get_page_from_freelist() for various full nodes and zone reclaim failures correct. That should be fixed up now - notice the new goto labels zonelist_scan, this_zone_full, and try_next_zone, in get_page_from_freelist(). There are two reasons I persued this alternative, over some earlier proposals that would have focused on optimizing the fake numa emulation case by caching the last useful zone: 1) Contrary to what I said before, we (SGI, on large ia64 sn2 systems) have seen real customer loads where the cost to scan the zonelist was a problem, due to many nodes being full of memory before we got to a node we could use. Or at least, I think we have. This was related to me by another engineer, based on experiences from some time past. So this is not guaranteed. Most likely, though. The following approach should help such real numa systems just as much as it helps fake numa systems, or any combination thereof. 2) The effort to distinguish fake from real numa, using node_distance, so that we could cache a fake numa node and optimize choosing it over equivalent distance fake nodes, while continuing to properly scan all real nodes in distance order, was going to require a nasty blob of zonelist and node distance munging. The following approach has no new dependency on node distances or zone sorting. See comment in the patch below for a description of what it actually does. Technical details of note (or controversy): - See the use of "zlc_active" and "did_zlc_setup" below, to delay adding any work for this new mechanism until we've looked at the first zone in zonelist. I figured the odds of the first zone having the memory we needed were high enough that we should just look there, first, then get fancy only if we need to keep looking. - Some odd hackery was needed to add items to struct zonelist, while not tripping up the custom zonelists built by the mm/mempolicy.c code for MPOL_BIND. My usual wordy comments below explain this. Search for "MPOL_BIND". - Some per-node data in the struct zonelist is now modified frequently, with no locking. Multiple CPU cores on a node could hit and mangle this data. The theory is that this is just performance hint data, and the memory allocator will work just fine despite any such mangling. The fields at risk are the struct 'zonelist_cache' fields 'fullzones' (a bitmask) and 'last_full_zap' (unsigned long jiffies). It should all be self correcting after at most a one second delay. - This still does a linear scan of the same lengths as before. All I've optimized is making the scan faster, not algorithmically shorter. It is now able to scan a compact array of 'unsigned short' in the case of many full nodes, so one cache line should cover quite a few nodes, rather than each node hitting another one or two new and distinct cache lines. - If both Andi and Nick don't find this too complicated, I will be (pleasantly) flabbergasted. - I removed the comment claiming we only use one cachline's worth of zonelist. We seem, at least in the fake numa case, to have put the lie to that claim. - I pay no attention to the various watermarks and such in this performance hint. A node could be marked full for one watermark, and then skipped over when searching for a page using a different watermark. I think that's actually quite ok, as it will tend to slightly increase the spreading of memory over other nodes, away from a memory stressed node. =============== Performance - some benchmark results and analysis: This benchmark runs a memory hog program that uses multiple threads to touch alot of memory as quickly as it can. Multiple runs were made, touching 12, 38, 64 or 90 GBytes out of the total 96 GBytes on the system, and using 1, 19, 37, or 55 threads (on a 56 CPU system.) System, user and real (elapsed) timings were recorded for each run, shown in units of seconds, in the table below. Two kernels were tested - 2.6.18-mm3 and the same kernel with this zonelist caching patch added. The table also shows the percentage improvement the zonelist caching sys time is over (lower than) the stock *-mm kernel. number 2.6.18-mm3 zonelist-cache delta (< 0 good) percent GBs N ------------ -------------- ---------------- systime mem threads sys user real sys user real sys user real better 12 1 153 24 177 151 24 176 -2 0 -1 1% 12 19 99 22 8 99 22 8 0 0 0 0% 12 37 111 25 6 112 25 6 1 0 0 -0% 12 55 115 25 5 110 23 5 -5 -2 0 4% 38 1 502 74 576 497 73 570 -5 -1 -6 0% 38 19 426 78 48 373 76 39 -53 -2 -9 12% 38 37 544 83 36 547 82 36 3 -1 0 -0% 38 55 501 77 23 511 80 24 10 3 1 -1% 64 1 917 125 1042 890 124 1014 -27 -1 -28 2% 64 19 1118 138 119 965 141 103 -153 3 -16 13% 64 37 1202 151 94 1136 150 81 -66 -1 -13 5% 64 55 1118 141 61 1072 140 58 -46 -1 -3 4% 90 1 1342 177 1519 1275 174 1450 -67 -3 -69 4% 90 19 2392 199 192 2116 189 176 -276 -10 -16 11% 90 37 3313 238 175 2972 225 145 -341 -13 -30 10% 90 55 1948 210 104 1843 213 100 -105 3 -4 5% Notes: 1) This test ran a memory hog program that started a specified number N of threads, and had each thread allocate and touch 1/N'th of the total memory to be used in the test run in a single loop, writing a constant word to memory, one store every 4096 bytes. Watching this test during some earlier trial runs, I would see each of these threads sit down on one CPU and stay there, for the remainder of the pass, a different CPU for each thread. 2) The 'real' column is not comparable to the 'sys' or 'user' columns. The 'real' column is seconds wall clock time elapsed, from beginning to end of that test pass. The 'sys' and 'user' columns are total CPU seconds spent on that test pass. For a 19 thread test run, for example, the sum of 'sys' and 'user' could be up to 19 times the number of 'real' elapsed wall clock seconds. 3) Tests were run on a fresh, single-user boot, to minimize the amount of memory already in use at the start of the test, and to minimize the amount of background activity that might interfere. 4) Tests were done on a 56 CPU, 28 Node system with 96 GBytes of RAM. 5) Notice that the 'real' time gets large for the single thread runs, even though the measured 'sys' and 'user' times are modest. I'm not sure what that means - probably something to do with it being slow for one thread to be accessing memory along ways away. Perhaps the fake numa system, running ostensibly the same workload, would not show this substantial degradation of 'real' time for one thread on many nodes -- lets hope not. 6) The high thread count passes (one thread per CPU - on 55 of 56 CPUs) ran quite efficiently, as one might expect. Each pair of threads needed to allocate and touch the memory on the node the two threads shared, a pleasantly parallizable workload. 7) The intermediate thread count passes, when asking for alot of memory forcing them to go to a few neighboring nodes, improved the most with this zonelist caching patch. Conclusions: * This zonelist cache patch probably makes little difference one way or the other for most workloads on real numa hardware, if those workloads avoid heavy off node allocations. * For memory intensive workloads requiring substantial off-node allocations on real numa hardware, this patch improves both kernel and elapsed timings up to ten per-cent. * For fake numa systems, I'm optimistic, but will have to leave that up to Rohit Seth to actually test (once I get him a 2.6.18 backport.) Signed-off-by: -
Christoph Lameter authored
The zone table is mostly not needed. If we have a node in the page flags then we can get to the zone via NODE_DATA() which is much more likely to be already in the cpu cache. In case of SMP and UP NODE_DATA() is a constant pointer which allows us to access an exact replica of zonetable in the node_zones field. In all of the above cases there will be no need at all for the zone table. The only remaining case is if in a NUMA system the node numbers do not fit into the page flags. In that case we make sparse generate a table that maps sections to nodes and use that table to to figure out the node number. This table is sized to fit in a single cache line for the known 32 bit NUMA platform which makes it very likely that the information can be obtained without a cache miss. For sparsemem the zone table seems to be have been fairly large based on the maximum possible number of sections and the number of zones per node. There is some memory saving by removing zone_table. The main benefit is to reduce the cache foootprint of the VM from the frequent lookups of zones. Plus it simplifies the page allocator. [akpm@osdl.org: build fix] Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Chen, Kenneth W authored
Signed-off-by:
-
Paul Jackson authored
- s/freeliest/freelist/ spelling fix - Check for NULL *z zone seems useless - even if it could happen, so what? Perhaps we should have a check later on if we are faced with an allocation request that is not allowed to fail - shouldn't that be a serious kernel error, passing an empty zonelist with a mandate to not fail? - Initializing 'z' to zonelist->zones can wait until after the first get_page_from_freelist() fails; we only use 'z' in the wakeup_kswapd() loop, so let's initialize 'z' there, in a 'for' loop. Seems clearer. - Remove superfluous braces around a break - Fix a couple errant spaces - Adjust indentation on the cpuset_zone_allowed() check, to match the lines just before it -- seems easier to read in this case. - Add another set of braces to the zone_watermark_ok logic From: Paul Jackson <pj@sgi.com> Backout one item from a previous "memory page_alloc minor cleanups" patch. Until and unless we are certain that no one can ever pass an empty zonelist to __alloc_pages(), this check for an empty zonelist (or some BUG equivalent) is essential. The code in get_page_from_freelist() blow ups if passed an empty zonelist. Signed-off-by:
-
Andrew Morton authored
arch/um/drivers/chan_kern.c:643: error: conflicting types for 'chan_interrupt' arch/um/include/chan_kern.h:31: error: previous declaration of 'chan_interrupt' Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Andrey Mirkin authored
OpenVZ Linux kernel team has found a problem with mounting in compat mode. Simple command "mount -t smbfs ..." on Fedora Core 5 distro in 32-bit mode leads to oops: Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: compat_sys_mount+0xd6/0x290 Process mount (pid: 14656, veid=300, threadinfo ffff810034d30000, task ffff810034c86bc0) Call Trace: ia32_sysret+0x0/0xa The problem is that data_page pointer can be NULL, so we should skip data conversion in this case. Signed-off-by:
Andrey Mirkin <amirkin@openvz.org> Cc: <stable@kernel.org> Signed-off-by:
-
Andrew Morton authored
Fix http://bugzilla.kernel.org/show_bug.cgi?id=7606 WARNING: "drm_sman_set_manager" [drivers/char/drm/sis.ko] undefined! Cc: <daniel-silveira@gee.inatel.br> Cc: Dave Airlie <airlied@linux.ie> Cc: <stable@kernel.org> Signed-off-by:
-
Andrew Morton authored
With CONFIG_SMP=n: drivers/input/ff-memless.c:384: warning: implicit declaration of function 'local_bh_disable' drivers/input/ff-memless.c:393: warning: implicit declaration of function 'local_bh_enable' Really linux/spinlock.h should include linux/interrupt.h. But interrupt.h includes sched.h which will need spinlock.h. So the patch breaks the _bh declarations out into a separate header and includes it in both interrupt.h and spinlock.h. Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Andi Kleen <ak@suse.de> Cc: <stable@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Jesper Juhl authored
Here's a small patch which - adds a few archs to the current list of supported platforms. - adds a few missing slashes at the end of URLs. - adds a few references to additional documentation. - adds "make config" to the list of possible configuration targets. - makes a few other minor changes. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> [ Ben Nizette <ben.nizette@iinet.net.au> points out AVR32 arch too ] Signed-off-by:
-
Jesper Juhl authored
Here's a patch that cleans up the "make help" output a bit for the documentation targets. Currently the documentation targets are listed completely different than all the other targets : Documentation targets: Linux kernel internal documentation in different formats: xmldocs (XML DocBook), psdocs (Postscript), pdfdocs (PDF) htmldocs (HTML), mandocs (man pages, use installmandocs to install) with this patch they are more in line with the rest of the output : Documentation targets: Linux kernel internal documentation in different formats: htmldocs - HTML installmandocs - install man pages generated by mandocs mandocs - man pages pdfdocs - PDF psdocs - Postscript xmldocs - XML DocBook Signed-off-by:Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Import updates from i386's i8259.c [MIPS] *-berr: Header inclusions for DEC bus error handlers [MIPS] Compile __do_IRQ() when really needed [MIPS] genirq: use name instead of typename [MIPS] Do not use handle_level_irq for ioasic_dma_irq_type. [MIPS] pte_offset(dir,addr): parenthesis fix
-
Linus Torvalds authored
* 'release' of master.kernel.org:/home/ftp/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Fix pci.c kernel compilation breakage.
-
- 06 Dec, 2006 13 commits
-
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Linus Torvalds authored
Any code that relies on the volatile would be a bug waiting to happen anyway. Don't encourage people to think that putting 'volatile' on data structures somehow fixes problems. We should always use proper locking (and other serialization) techniques. Signed-off-by: -
Art Haas authored
This is a resubmission of patches originally created by Ingo Molnar. The link below is the initial (?) posting of the patch. http://marc.theaimsgroup.com/?l=linux-kernel&m=115217423929806&w=2 Remove 'volatile' from spinlock_types as it causes GCC to generate bad code (see link) and locking should be used on kernel data. Signed-off-by:
Art Haas <ahaas@airmail.net> Signed-off-by:
-
Peter Chubb authored
The recent change to convert the is_enabled flag in the PCI device to an atomic count broke the IA64 compilation. As pcibios_disable_device is only ever called if the reference count is zero, convert the if to a BUG_ON. Signed-off-by:
Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by:
Tony Luck <tony.luck@intel.com>
-
Atsushi Nemoto authored
Import many updates from i386's i8259.c, especially genirq transitions. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Maciej W. Rozycki authored
A fixup to add missing header inclusions for bus error handlers for DECstation system after the recent switch to get_irq_regs(). Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Franck Bui-Huu authored
__do_IRQ() is needed only by irq handlers that can't use default handlers defined in kernel/irq/chip.c. For others platforms there's no need to compile this function since it won't be used. For those platforms this patch defines GENERIC_HARDIRQS_NO__DO_IRQ symbol which is used exactly for this purpose. Futhermore for platforms which do not use __do_IRQ(), end() method which is part of the 'irq_chip' structure is not used. This patch simply removes this method in this case. Signed-off-by:
Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by:
-
Atsushi Nemoto authored
The "typename" field was obsoleted by the "name" field. Signed-off-by:
-
Atsushi Nemoto authored
Signed-off-by:
-
Franck Bui-Huu authored
This patch adds missing parenthesis around 'dir' argument in pte_offset() macro definition. It also removes an extra space in the definition of pte_offset_kernel() macro. Signed-off-by:
-
Al Viro authored
part 1 of fsck-knows-how-many Signed-off-by:
-
