- 05 Apr, 2012 15 commits
-
-
Ashish Jangam authored
DA9052/53 PMIC has capability to supply power for upto 3 banks of 6 white serial LEDS. It can also control intensity of independent banks and to drive these banks boost converter will provide up to 24V and forward current of max 50mA. This patch allows to control intensity of the individual WLEDs bank through DA9052/53 PMIC. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by:
David Dajun Chen <dchen@diasemi.com> Signed-off-by:
Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Christopher Li authored
Signed-off-by:
Christopher Li <sparse@chrisli.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
remoteproc.txt should have been .h Signed-off-by:
Joe Perches <joe@perches.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check for shared signals we're about to block. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Boyd authored
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Julia Lawall authored
Find instances of an open-coded simple_open() and replace them with calls to simple_open(). Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Reported-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Boyd authored
debugfs and a few other drivers use an open-coded version of simple_open() to pass a pointer from the file to the read/write file ops. Add support for this simple case to libfs so that we can remove the many duplicate copies of this simple function. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hillf Danton authored
It was introduced by d1d5e05f ("hugetlbfs: return error code when initializing module") but as Al pointed out, is a bad idea. Quoted comments from Al: "Note that unregister_filesystem() in module init is *always* wrong; it's not an issue here (it's done too early to care about and realistically the box is not going anywhere - it'll panic when attempt to exec /sbin/init fails, if not earlier), but it's a damn bad example. Consider a normal fs module. Somebody loads it and in parallel with that we get a mount attempt on that fs type. It comes between register and failure exits that causes unregister; at that point we are screwed since grabbing a reference to module as done by mount is enough to prevent exit, but not to prevent the failure of init. As the result, module will get freed when init fails, mounted fs of that type be damned." So remove it. Signed-off-by:
Hillf Danton <dhillf@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jett.Zhou authored
According to 88pm860x spec, rtc alarm irq enable control is bit3 for RTC_ALARM_EN, so fix it. Signed-off-by:
Jett.Zhou <jtzhou@marvell.com> Cc: Axel Lin <axel.lin@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
This allocation can be as large as 64k. - Add __GFP_NOWARN so the a falied kmalloc() is silent - Fall back to vmalloc() if the kmalloc() failed Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: David Rientjes <rientjes@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
This allocation can be as large as 64k. As David points out, "falling back to vmalloc here is much better solution than failing to retreive the attribute - it will work no matter how fragmented memory gets. That means we don't get incomplete backups occurring after days or months of uptime and successful backups". Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: David Rientjes <rientjes@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Jones authored
This size is user controllable, up to a maximum of XATTR_LIST_MAX (64k). So it's trivial for someone to trigger a stream of order:4 page allocation errors. Signed-off-by:
Dave Jones <davej@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Anton Vorontsov authored
Change send_sig_all() to use do_send_sig_info(SEND_SIG_FORCED) instead of force_sig(SIGKILL). With the recent changes we do not need force_ to kill the CLONE_NEWPID tasks. And this is more correct. force_sig() can race with the exiting thread, while do_send_sig_info(group => true) kill the whole process. Some more notes from Oleg Nesterov: > Just one note. This change makes no difference for sysrq_handle_kill(). > But it obviously changes the behaviour sysrq_handle_term(). I think > this is fine, if you want to really kill the task which blocks/ignores > SIGTERM you can use sysrq_handle_kill(). > > Even ignoring the reasons why force_sig() is simply wrong here, > force_sig(SIGTERM) looks strange. The task won't be killed if it has > a handler, but SIG_IGN can't help. However if it has the handler > but blocks SIGTERM temporary (this is very common) it will be killed. Also, > force_sig() can't kill the process if the main thread has already > exited. IOW, it is trivial to create the process which can't be > killed by sysrq. So, this patch fixes the issue. Suggested-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vasiliy Kulikov authored
The proc_parse_options() call from proc_mount() runs only once at boot time. So on any later mount attempt, any mount options are ignored because ->s_root is already initialized. As a consequence, "mount -o <options>" will ignore the options. The only way to change mount options is "mount -o remount,<options>". To fix this, parse the mount options unconditionally. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Reported-by:
Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Tested-by:
Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 29 Mar, 2012 25 commits
-
-
Naoya Horiguchi authored
Commit 025c5b24 ("thp: optimize away unnecessary page table locking") moves spin_lock() into pmd_trans_huge_lock() in order to avoid locking unless pmd is for thp. So this spin_lock() is a bug. Reported-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Masanari Iida authored
Fix typo in drivers/video/backlight/tosa_lcd.c "tosa_lcd_reume" should be "tosa_lcd_resume". Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Darrick J. Wong authored
Add help text to the crc32 algorithm selection option in Kconfig. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Reported-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Young authored
hugepage-mmap.c, hugepage-shm.c and map_hugetlb.c in Documentation/vm are simple pass/fail tests, It's better to promote them to tools/testing/selftests. Thanks suggestion of Andrew Morton about this. They all need firstly setting up proper nr_hugepages and hugepage-mmap need to mount hugetlbfs. So I add a shell script run_vmtests to do such work which will call the three test programs and check the return value of them. Changes to original code including below: a. add run_vmtests script b. return error when read_bytes mismatch with writed bytes. c. coding style fixes: do not use assignment in if condition [akpm@linux-foundation.org: build the targets before trying to execute them] [akpm@linux-foundation.org: Documentation/vm/ no longer has a Makefile. Fixes "make clean"] Signed-off-by:
Dave Young <dyoung@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Young authored
We have tools/vm/ folder for vm tools, so move slabinfo.c from tools/slub/ to tools/vm/ Signed-off-by:
Dave Young <dyoung@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Young authored
tools/ is the better place for vm tools which are used by many people. Moving them to tools also make them open to more users instead of hide in Documentation folder. This patch moves page-types.c to tools/vm/page-types.c. Also add a Makefile in tools/vm and fix two coding style problems: a) change const arrary to 'const char * const', b) change a space to tab for indent. Signed-off-by:
Dave Young <dyoung@redhat.com> Acked-by:
Wu Fengguang <fengguang.wu@intel.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
So a "make run_tests" will build the tests before trying to run them. Acked-by:
Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Frederic Weisbecker authored
Remove the run_tests script and launch the selftests by calling "make run_tests" from the selftests top directory instead. This delegates to the Makefile in each selftest directory, where it is decided how to launch the local test. This removes the need to add each selftest directory to the now removed "run_tests" top script. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Konstantin Khlebnikov authored
Replace radix_tree_gang_lookup_slot() and radix_tree_gang_lookup_tag_slot() in page-cache lookup functions with brand-new radix-tree direct iterating. This avoids the double-scanning and pointer copying. Iterator don't stop after nr_pages page-get fails in a row, it continue lookup till the radix-tree end. Thus we can safely remove these restart conditions. Unfortunately, old implementation didn't forbid nr_pages == 0, this corner case does not fit into new code, so the patch adds an extra check at the beginning. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Tested-by:
Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Konstantin Khlebnikov authored
Rewrite radix_tree_gang_lookup_* functions using the new radix-tree iterator. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Tested-by:
Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Konstantin Khlebnikov authored
A series of radix tree cleanups, and usage of them in the core pagecache code. Micro-benchmark: lookup 14 slots (typical page-vector size) in radix-tree there earch <step> slot filled and tagged before/after - nsec per full scan through tree * Intel Sandy Bridge i7-2620M 4Mb L3 New code always faster * AMD Athlon 6000+ 2x1Mb L2, without L3 New code generally faster, Minor degradation (marked with "*") for huge sparse trees * i386 on Sandy Bridge New code faster for common cases: tagged and dense trees. Some degradations for non-tagged lookup on sparse trees. Ideally, there might help __ffs() analog for searching first non-zero long element in array, gcc sometimes cannot optimize this loop corretly. Numbers: CPU: Intel Sandy Bridge i7-2620M 4Mb L3 radix-tree with 1024 slots: tagged lookup step 1 before 7156 after 3613 step 2 before 5399 after 2696 step 3 before 4779 after 1928 step 4 before 4456 after 1429 step 5 before 4292 after 1213 step 6 before 4183 after 1052 step 7 before 4157 after 951 step 8 before 4016 after 812 step 9 before 3952 after 851 step 10 before 3937 after 732 step 11 before 4023 after 709 step 12 before 3872 after 657 step 13 before 3892 after 633 step 14 before 3720 after 591 step 15 before 3879 after 578 step 16 before 3561 after 513 normal lookup step 1 before 4266 after 3301 step 2 before 2695 after 2129 step 3 before 2083 after 1712 step 4 before 1801 after 1534 step 5 before 1628 after 1313 step 6 before 1551 after 1263 step 7 before 1475 after 1185 step 8 before 1432 after 1167 step 9 before 1373 after 1092 step 10 before 1339 after 1134 step 11 before 1292 after 1056 step 12 before 1319 after 1030 step 13 before 1276 after 1004 step 14 before 1256 after 987 step 15 before 1228 after 992 step 16 before 1247 after 999 radix-tree with 1024*1024*128 slots: tagged lookup step 1 before 1086102841 after 674196409 step 2 before 816839155 after 498138306 step 7 before 599728907 after 240676762 step 15 before 555729253 after 185219677 step 63 before 606637748 after 128585664 step 64 before 608384432 after 102945089 step 65 before 596987114 after 123996019 step 128 before 304459225 after 56783056 step 256 before 158846855 after 31232481 step 512 before 86085652 after 18950595 step 12345 before 6517189 after 1674057 normal lookup step 1 before 626064869 after 544418266 step 2 before 418809975 after 336321473 step 7 before 242303598 after 207755560 step 15 before 208380563 after 176496355 step 63 before 186854206 after 167283638 step 64 before 176188060 after 170143976 step 65 before 185139608 after 167487116 step 128 before 88181865 after 86913490 step 256 before 45733628 after 45143534 step 512 before 24506038 after 23859036 step 12345 before 2177425 after 2018662 * AMD Athlon 6000+ 2x1Mb L2, without L3 radix-tree with 1024 slots: tag-lookup step 1 before 8164 after 5379 step 2 before 5818 after 5581 step 3 before 4959 after 4213 step 4 before 4371 after 3386 step 5 before 4204 after 2997 step 6 before 4950 after 2744 step 7 before 4598 after 2480 step 8 before 4251 after 2288 step 9 before 4262 after 2243 step 10 before 4175 after 2131 step 11 before 3999 after 2024 step 12 before 3979 after 1994 step 13 before 3842 after 1929 step 14 before 3750 after 1810 step 15 before 3735 after 1810 step 16 before 3532 after 1660 normal-lookup step 1 before 7875 after 5847 step 2 before 4808 after 4071 step 3 before 4073 after 3462 step 4 before 3677 after 3074 step 5 before 4308 after 2978 step 6 before 3911 after 3807 step 7 before 3635 after 3522 step 8 before 3313 after 3202 step 9 before 3280 after 3257 step 10 before 3166 after 3083 step 11 before 3066 after 3026 step 12 before 2985 after 2982 step 13 before 2925 after 2924 step 14 before 2834 after 2808 step 15 before 2805 after 2803 step 16 before 2647 after 2622 radix-tree with 1024*1024*128 slots: tag-lookup step 1 before 1288059720 after 951736580 step 2 before 961292300 after 884212140 step 7 before 768905140 after 547267580 step 15 before 771319480 after 456550640 step 63 before 504847640 after 242704304 step 64 before 392484800 after 177920786 step 65 before 491162160 after 246895264 step 128 before 208084064 after 97348392 step 256 before 112401035 after 51408126 step 512 before 75825834 after 29145070 step 12345 before 5603166 after 2847330 normal-lookup step 1 before 1025677120 after 861375100 step 2 before 647220080 after 572258540 step 7 before 505518960 after 484041813 step 15 before 430483053 after 444815320 * step 63 before 388113453 after 404250546 * step 64 before 374154666 after 396027440 * step 65 before 381423973 after 396704853 * step 128 before 190078700 after 202619384 * step 256 before 100886756 after 102829108 * step 512 before 64074505 after 56158720 step 12345 before 4237289 after 4422299 * * i686 on Sandy bridge radix-tree with 1024 slots: tagged lookup step 1 before 7990 after 4019 step 2 before 5698 after 2897 step 3 before 5013 after 2475 step 4 before 4630 after 1721 step 5 before 4346 after 1759 step 6 before 4299 after 1556 step 7 before 4098 after 1513 step 8 before 4115 after 1222 step 9 before 3983 after 1390 step 10 before 4077 after 1207 step 11 before 3921 after 1231 step 12 before 3894 after 1116 step 13 before 3840 after 1147 step 14 before 3799 after 1090 step 15 before 3797 after 1059 step 16 before 3783 after 745 normal lookup step 1 before 5103 after 3499 step 2 before 3299 after 2550 step 3 before 2489 after 2370 step 4 before 2034 after 2302 * step 5 before 1846 after 2268 * step 6 before 1752 after 2249 * step 7 before 1679 after 2164 * step 8 before 1627 after 2153 * step 9 before 1542 after 2095 * step 10 before 1479 after 2109 * step 11 before 1469 after 2009 * step 12 before 1445 after 2039 * step 13 before 1411 after 2013 * step 14 before 1374 after 2046 * step 15 before 1340 after 1975 * step 16 before 1331 after 2000 * radix-tree with 1024*1024*128 slots: tagged lookup step 1 before 1225865377 after 667153553 step 2 before 842427423 after 471533007 step 7 before 609296153 after 276260116 step 15 before 544232060 after 226859105 step 63 before 519209199 after 141343043 step 64 before 588980279 after 141951339 step 65 before 521099710 after 138282060 step 128 before 298476778 after 83390628 step 256 before 149358342 after 43602609 step 512 before 76994713 after 22911077 step 12345 before 53286669 after 1472111 normal lookup step 1 before 819284564 after 533635310 step 2 before 512421605 after 364956155 step 7 before 271443305 after 305721345 * step 15 before 223591630 after 273960216 * step 63 before 190320247 after 217770207 * step 64 before 178538168 after 267411372 * step 65 before 186400423 after 215347937 * step 128 before 88106045 after 140540612 * step 256 before 44812420 after 70660377 * step 512 before 24435438 after 36328275 * step 12345 before 2123924 after 2148062 * bloat-o-meter delta for this patchset + patchset with related shmem cleanups bloat-o-meter: x86_64 add/remove: 4/3 grow/shrink: 5/6 up/down: 928/-939 (-11) function old new delta radix_tree_next_chunk - 499 +499 shmem_unuse 428 554 +126 shmem_radix_tree_replace 131 227 +96 find_get_pages_tag 354 419 +65 find_get_pages_contig 345 407 +62 find_get_pages 362 396 +34 __kstrtab_radix_tree_next_chunk - 22 +22 __ksymtab_radix_tree_next_chunk - 16 +16 __kcrctab_radix_tree_next_chunk - 8 +8 radix_tree_gang_lookup_slot 204 203 -1 static.shmem_xattr_set 384 381 -3 radix_tree_gang_lookup_tag_slot 208 191 -17 radix_tree_gang_lookup 231 187 -44 radix_tree_gang_lookup_tag 247 199 -48 shmem_unlock_mapping 278 190 -88 __lookup 217 - -217 __lookup_tag 242 - -242 radix_tree_locate_item 279 - -279 bloat-o-meter: i386 add/remove: 3/3 grow/shrink: 8/9 up/down: 1075/-1275 (-200) function old new delta radix_tree_next_chunk - 757 +757 shmem_unuse 352 449 +97 find_get_pages_contig 269 322 +53 shmem_radix_tree_replace 113 154 +41 find_get_pages_tag 277 318 +41 dcache_dir_lseek 426 458 +32 __kstrtab_radix_tree_next_chunk - 22 +22 vc_do_resize 968 977 +9 snd_pcm_lib_read1 725 733 +8 __ksymtab_radix_tree_next_chunk - 8 +8 netlbl_cipsov4_list 1120 1127 +7 find_get_pages 293 291 -2 new_slab 467 459 -8 bitfill_unaligned_rev 425 417 -8 radix_tree_gang_lookup_tag_slot 177 146 -31 blk_dump_cmd 267 229 -38 radix_tree_gang_lookup_slot 212 134 -78 shmem_unlock_mapping 221 128 -93 radix_tree_gang_lookup_tag 275 162 -113 radix_tree_gang_lookup 255 126 -129 __lookup 227 - -227 __lookup_tag 271 - -271 radix_tree_locate_item 277 - -277 This patch: Implement a clean, simple and effective radix-tree iteration routine. Iterating divided into two phases: * lookup next chunk in radix-tree leaf node * iterating through slots in this chunk Main iterator function radix_tree_next_chunk() returns pointer to first slot, and stores in the struct radix_tree_iter index of next-to-last slot. For tagged-iterating it also constuct bitmask of tags for retunted chunk. All additional logic implemented as static-inline functions and macroses. Also adds radix_tree_find_next_bit() static-inline variant of find_next_bit() optimized for small constant size arrays, because find_next_bit() too heavy for searching in an array with one/two long elements. [akpm@linux-foundation.org: rework comments a bit] Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Tested-by:
Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
If CONFIG_NET_NS, CONFIG_UTS_NS and CONFIG_IPC_NS are disabled, ns_entries[] becomes empty and things like ns_entries[ARRAY_SIZE(ns_entries) - 1] will explode. Reported-by:
Richard Weinberger <richard@nod.at> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wanlong Gao authored
rename the nbd_device variable from "lo" to "nbd", since "lo" is just a name copied from loop.c. Signed-off-by:
Wanlong Gao <gaowanlong@cn.fujitsu.com> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Lezcano authored
In the case of a child pid namespace, rebooting the system does not really makes sense. When the pid namespace is used in conjunction with the other namespaces in order to create a linux container, the reboot syscall leads to some problems. A container can reboot the host. That can be fixed by dropping the sys_reboot capability but we are unable to correctly to poweroff/ halt/reboot a container and the container stays stuck at the shutdown time with the container's init process waiting indefinitively. After several attempts, no solution from userspace was found to reliabily handle the shutdown from a container. This patch propose to make the init process of the child pid namespace to exit with a signal status set to : SIGINT if the child pid namespace called "halt/poweroff" and SIGHUP if the child pid namespace called "reboot". When the reboot syscall is called and we are not in the initial pid namespace, we kill the pid namespace for "HALT", "POWEROFF", "RESTART", and "RESTART2". Otherwise we return EINVAL. Returning EINVAL is also an easy way to check if this feature is supported by the kernel when invoking another 'reboot' option like CAD. By this way the parent process of the child pid namespace knows if it rebooted or not and can take the right decision. Test case: ========== #include <alloca.h> #include <stdio.h> #include <sched.h> #include <unistd.h> #include <signal.h> #include <sys/reboot.h> #include <sys/types.h> #include <sys/wait.h> #include <linux/reboot.h> static int do_reboot(void *arg) { int *cmd = arg; if (reboot(*cmd)) printf("failed to reboot(%d): %m\n", *cmd); } int test_reboot(int cmd, int sig) { long stack_size = 4096; void *stack = alloca(stack_size) + stack_size; int status; pid_t ret; ret = clone(do_reboot, stack, CLONE_NEWPID | SIGCHLD, &cmd); if (ret < 0) { printf("failed to clone: %m\n"); return -1; } if (wait(&status) < 0) { printf("unexpected wait error: %m\n"); return -1; } if (!WIFSIGNALED(status)) { printf("child process exited but was not signaled\n"); return -1; } if (WTERMSIG(status) != sig) { printf("signal termination is not the one expected\n"); return -1; } return 0; } int main(int argc, char *argv[]) { int status; status = test_reboot(LINUX_REBOOT_CMD_RESTART, SIGHUP); if (status < 0) return 1; printf("reboot(LINUX_REBOOT_CMD_RESTART) succeed\n"); status = test_reboot(LINUX_REBOOT_CMD_RESTART2, SIGHUP); if (status < 0) return 1; printf("reboot(LINUX_REBOOT_CMD_RESTART2) succeed\n"); status = test_reboot(LINUX_REBOOT_CMD_HALT, SIGINT); if (status < 0) return 1; printf("reboot(LINUX_REBOOT_CMD_HALT) succeed\n"); status = test_reboot(LINUX_REBOOT_CMD_POWER_OFF, SIGINT); if (status < 0) return 1; printf("reboot(LINUX_REBOOT_CMD_POWERR_OFF) succeed\n"); status = test_reboot(LINUX_REBOOT_CMD_CAD_ON, -1); if (status >= 0) { printf("reboot(LINUX_REBOOT_CMD_CAD_ON) should have failed\n"); return 1; } printf("reboot(LINUX_REBOOT_CMD_CAD_ON) has failed as expected\n"); return 0; } [akpm@linux-foundation.org: tweak and add comments] [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Daniel Lezcano <daniel.lezcano@free.fr> Acked-by:
Serge Hallyn <serge.hallyn@canonical.com> Tested-by:
Serge Hallyn <serge.hallyn@canonical.com> Reviewed-by:
Oleg Nesterov <oleg@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
Use bitmap_set() instead of using set_bit() for each bit. This conversion is valid because the bitmap is private in the function call and atomic bitops were unnecessary. This also includes minor change. - Use bitmap_copy() for shorter typing Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Corey Minyard authored
The IPMI watchdog timer clears or extends the timer on reboot/shutdown. It was using the non-locking routine for setting the watchdog timer, but this was causing race conditions. Instead, use the locking version to avoid the races. It seems to work fine. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Corey Minyard authored
Now that the the IPMI driver is using a tasklet, we can simplify the locking in the driver and get rid of the message lock. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Corey Minyard authored
The part of the IPMI driver that delivered panic information to the event log and extended the watchdog timeout during a panic was not properly handling the messages. It used static messages to avoid allocation, but wasn't properly waiting for these, or wasn't properly handling the refcounts. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Corey Minyard authored
The IPMI driver would release a lock, deliver a message, then relock. This is obviously ugly, and this patch converts the message handler interface to use a tasklet to schedule work. This lets the receive handler be called from an interrupt handler with interrupts enabled. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Matthew Garrett authored
We currently time out and retry KCS transactions after 1 second of waiting for IBF or OBF. This appears to be too short for some hardware. The IPMI spec says "All system software wait loops should include error timeouts. For simplicity, such timeouts are not shown explicitly in the flow diagrams. A five-second timeout or greater is recommended". Change the timeout to five seconds to satisfy the slow hardware. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Srinivas_Gowda authored
Call the event handler immediately after starting the next message. This change considerably decreases the IPMI transaction time (cuts off ~9ms for a single ipmitool transaction). Signed-off-by:
Srinivas_Gowda <srinivas_g_gowda@dell.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Young authored
crashkernel reservation need know the total memory size. Current get_total_mem simply use max_pfn - min_low_pfn. It is wrong because it will including memory holes in the middle. Especially for kvm guest with memory > 0xe0000000, there's below in qemu code: qemu split memory as below: if (ram_size >= 0xe0000000 ) { above_4g_mem_size = ram_size - 0xe0000000; below_4g_mem_size = 0xe0000000; } else { below_4g_mem_size = ram_size; } So for 4G mem guest, seabios will insert a 512M usable region beyond of 4G. Thus in above case max_pfn - min_low_pfn will be more than original memsize. Fixing this issue by using memblock_phys_mem_size() to get the total memsize. Signed-off-by:
Dave Young <dyoung@redhat.com> Reviewed-by:
WANG Cong <xiyou.wangcong@gmail.com> Reviewed-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Zhenzhong Duan authored
When using crashkernel=2M-256M, the kernel doesn't give any warning. This is misleading sometimes. Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Will Deacon authored
nommu platforms don't have very interesting swapper_pg_dir pointers and usually just #define them to NULL, meaning that we can't include them in the vmcoreinfo on the kexec crash path. This patch only saves the swapper_pg_dir if we have an MMU. Signed-off-by:
Will Deacon <will.deacon@arm.com> Reviewed-by:
Simon Horman <horms@verge.net.au> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Srivatsa S. Bhat authored
This was marked as obsolete for quite a while now.. Now it is time to remove it altogether. And while doing this, get rid of first_cpu() as well. Also, remove the redundant setting of cpu_online_mask in smp_prepare_cpus() because the generic code would have already set cpu 0 in cpu_online_mask. Reported-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-