Logging at trace level, rather than as en error, as it seems conceivable
that failure could be normal under certain circumstances (new bios,
older sink that doesn't support a particular DPCD address)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Starting from GM204, certain registers are no longer accessible by the host
(or unsigned PMU firmware).

This commit implements devinit on PMU, using a signed microcode image, and
devinit data, from the VBIOS.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The field at +0x2 is technically processor specific, though I don't know
that it's ever mattered in practice (yet).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We're about to need to be able to fetch additional chunks of data beyond
the primary bios image, which makes fetching a lot more complicated.

This splits out the verious shadowing routines to be nothing more than
very dumb "fetch this much data from this offset" routines, and leaves
the logic of what and how much to fetch in common code.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Some Tegra drivers might be compiled as kernel modules, and they need the
fuse information for initialization. One example is the GK20A Nouveau
driver. It needs the GPU speedo value to calculate frequency-voltage
table. So export the tegra_sku_info.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Platform data support has been removed from the DU driver, drop DU
support from the legacy Marzen board file. The multiplatform DT-based
Marzen support should be used instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Platform data support has been removed from the DU driver, drop DU
support from the legacy Lager board file. The multiplatform DT-based
Lager support should be used instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The branch is based on a merge of drm-next and Simon's tags/renesas-dt-du-for-
v3.19 available at
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git, the latter
having been pulled in the ARM SoC tree for v3.19.

Compared to v1, I've rebased my branch on a later drm-next, added Julia's
error return code fix, and documented the "drm: Decouple EDID parsing from I2C
adapter" patch properly.

v1:
Here's a pull request that adds HDMI support to the R-Car DU driver, including
a new slave encoder driver for the adv7511.

* 'drm/du/adv7511' of git://linuxtv.org/pinchartl/fbdev:
  drm: Add adv7511 encoder driver
  video: Add ADV751[13] DT bindings documentation
  drm: Decouple EDID parsing from I2C adapter
  drm: rcar-du: Add HDMI encoder and connector support
  drm: rcar-du: Replace drm_encoder with drm_slave_encoder
  drm: rcar-du: Replace direct DRM encoder access with cast macro
  drm: rcar-du: Pass the encoder DT node to rcar_du_encoder_init()
  drm: rcar-du: Remove platform data support
  drm: rcar-du: fix error return code
  ARM: shmobile: koelsch: Enable DU device in DT
  ARM: shmobile: koelsch-reference: Remove DU platform device
  ARM: shmobile: lager: Enable DU device in DT
  ARM: shmobile: lager-reference: Remove DU platform device
  ARM: shmobile: marzen: Enable DU device in DT
  ARM: shmobile: dts: Add common file for AA104XD12 panel
  ARM: shmobile: r8a7791: Add DU node to device tree
  ARM: shmobile: r8a7790: Add DU node to device tree
  ARM: shmobile: r8a7779: Add DU node to device tree
  ARM: shmobile: Remove FSF address from copyright headers

- Fixes for sparse warnings
- Memory leak fixes
- Fix for deadlock between amdkfd and iommu

* 'amdkfd-next-3.19' of git://people.freedesktop.org/~gabbayo/linux:
  amdkfd: delete some dead code
  amdkfd: Fix memory leak of mqds on dqm fini
  amdkfd: fix an error handling bug in pqm_create_queue()
  amdkfd: fix some error handling in ioctl
  amdkfd: Remove DRM_AMDGPU dependency from Kconfig
  amdkfd: explicitely include io.h in kfd_doorbell.c
  amdkfd: Clear ctx cb before suspend
  amdkfd: Instead of using get function, use container_of
  amdkfd: use schedule() in sync_with_hw
  amdkfd: Fix memory leak on process deregistration
  amdkfd: add __iomem attribute to doorbell_ptr
  amdkfd: fence_wait_timeout() can be static
  amdkfd: is_occupied() can be static
  amdkfd: Fix sparse warnings in kfd_flat_memory.c
  amdkfd: pqm_get_kernel_queue() can be static
  amdkfd: test_kq() can be static
  amdkfd: Fix sparse warnings in kfd_topology.c
  amdkfd: Fix sparse warnings in kfd_chardev.c

This patch adds a driver for the Analog Devices adv7511. The adv7511 is
a standalone HDMI transmitter chip. It features a HDMI output interface
on one end and video and audio input interfaces on the other.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters
compatible with HDMI 1.4 and DVI 1.0. They're described in DT using the
OF graph bindings and a list of custom properties pertaining to the
input video bus configuration.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The drm_get_edid() function performs direct I2C accesses to read EDID
blocks, assuming that the monitor DDC interface is directly connected to
the I2C bus. It can't thus be used with HDMI encoders that control the
DDC bus and expose EDID blocks through a different interface.

Refactor drm_do_get_edid() to take a block read callback function
instead of an I2C adapter, and export it for direct use by drivers.

As in the general case the DDC bus is accessible by the kernel at the
I2C level, drivers must make all reasonable efforts to expose it as an
I2C adapter and use drm_get_edid() instead of abusing this function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

SoCs that integrate the DU have no internal HDMI encoder, support
external encoders only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

DRM slave encoders require their associated struct drm_encoder instance
to be embedded in a struct drm_slave_encoder. This makes processing
encoders regardless of their types needlessly and painfully complex in
drivers that use a mix of slave encoders and custom encoders. Such a
driver will need to either create drm_slave_encoder instances that fake
their embedded encoder instance, or to turn all drm_encoder instances
into drm_slave_encoder instances.

Between the two evils, one must choose the lesser. Use drm_slave_encoder
everywhere.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Add a new macro to downcast an rcar_du_encoder pointer to a drm_encoder
pointer and use it. This prepares for the replacement of the
rcar_drm_encoder encoder field with a drm_slave_encoder.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The encoder DT node will be needed to register an external HDMI encoder.
Pass it to the rcar_du_encoder_init() function to prepare for HDMI
support.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

All platforms now instantiate the DU through DT, platform data support
isn't needed anymore.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Propagate the error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The drm_prime_pages_to_sg() function never returns NULL pointers, only
error pointers and valid pointers.
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fixes dmabuf export failure with -E_NOMEM when the page is not mapped.
Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Add myself as the maintainer of the i.MX DRM driver.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The imx-drm driver was put into staging mostly for the following reasons,
all of which have been addressed or superseded:
 - convert the irq driver to use linear irq domains
 - work out the device tree bindings, this lead to the common of_graph
   bindings being used
 - factor out common helper functions, this mostly resulted in the
   component framework and drm of_graph helpers.

Before adding new fixes, and certainly before adding new features,
move it into its proper place below drivers/gpu/drm.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Renesas ARM Based SoC DT DU Updates for v3.19

* Enable DU using DT on marzen/r8a7779, lager/r8a7790 and koelsch/r8a7791

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

  Add Exynos4415 SoC support, some fixups and cleanups.

   Summary:
   - Resolve kernel lockup issue incurred by probe request in probe context.
     . For this, it moves all register codes of sub drivers into init function
       and adds component binding support for vidi driver.
   - Add Exynos4415 SoC support.
   - Make each manager and display object to be embedded
     in each driver context.
   - Fix and clean up FIMD and MIPI-DSI drivers.
   - Clean up unnecesary or wrong descriptions.
   - And trivial cleanups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (58 commits)
  drm/exynos: avoid leak if exynos_dpi_probe() fails
  drm/exynos: Fix exynos_dpi_remove() parameter
  drm/exynos: vidi: add component support
  drm/exynos: fix exynos_drm_component_del
  drm/exynos/ipp: fix error return code
  drm/exynos: clean up machine compatible string check
  drm/exynos: move Exynos platform drivers registration to init
  Revert "drm/exynos: fix null pointer dereference issue"
  drm/exynos/dpi: stop using display->ctx pointer
  drm/exynos/dpi: embed display into private context
  drm/exynos/dp: stop using display->ctx pointer
  drm/exynos/dp: embed display into private context
  drm/exynos/vidi: stop using display->ctx pointer
  drm/exynos/vidi: embed display into private context
  drm/exynos/hdmi: stop using display->ctx pointer
  drm/exynos/hdmi: embed display into private context
  drm/exynos/fimd: stop using manager->ctx pointer
  drm/exynos/fimd: embed manager into private context
  drm/exynos/vidi: stop using manager->ctx pointer
  drm/exynos/vidi: embed manager into private context
  ...

This is dead code.  We don't need to unbind here, we can just return
directly.
Reviewed-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

The mqds array members are not freed when dqm is uninitialized.
Reviewed-by: Ben Goz <Ben.Goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

Now that we have the bits needed for mdp5 atomic, here is the followup
pull request I mentioned.  Main highlights are:

1) mdp5 multiple crtc and public plane support (no more hard-coded mixer setup!)
2) mdp5 atomic conversion
3) couple atomic helper fixes for issues found during mdp5 atomic
debug (reviewed by danvet.. but he didn't plane to send an
atomic-fixes pull request so I agreed to tack them on to mine)

* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
  drm/atomic: shutdown *current* encoder
  drm/atomic: check mode_changed *after* atomic_check
  drm/msm/mdp4: fix mixer setup for multi-crtc + planes
  drm/msm/mdp5: dpms(OFF) cleanups
  drm/msm/mdp5: atomic
  drm/msm: atomic fixes
  drm/msm/mdp5: remove global mdp5_ctl_mgr
  drm/msm/mdp5: don't use void * for opaque types
  drm/msm: add multiple CRTC and overlay support
  drm/msm/mdp5: set rate before enabling clk
  drm/msm/mdp5: introduce mdp5_cfg module
  drm/msm/mdp5: make SMP module dynamically configurable
  drm/msm/hdmi: remove useless kref
  drm/msm/mdp5: get the core clock rate from MDP5 config
  drm/msm/mdp5: use irqdomains

The call to kernel_queue_uninit(NULL) will trigger a BUG(), and also the
error code is incorrect.

Fixes: 45102048 ('amdkfd: Add process queue manager module')
Reviewed-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

There is a typo here so the errors from kfd_bind_process_to_device()
are not detected.
Reviewed-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

The component must be deleted if the probe fails.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

exynos_dpi_remove() should receive a exynos_drm_display but when
DRM_EXYNOS_DPI was disabled it was receiving a struct device resulting in
ia compiler warning.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>