1. 15 Mar, 2013 17 commits
  2. 14 Mar, 2013 1 commit
  3. 13 Mar, 2013 7 commits
  4. 11 Mar, 2013 1 commit
  5. 08 Mar, 2013 1 commit
  6. 07 Mar, 2013 2 commits
    • Steven Rostedt (Red Hat)'s avatar
      tracing: Do not return EINVAL in snapshot when not allocated · c9960e48
      Steven Rostedt (Red Hat) authored
      To use the tracing snapshot feature, writing a '1' into the snapshot
      file causes the snapshot buffer to be allocated if it has not already
      been allocated and dose a 'swap' with the main buffer, so that the
      snapshot now contains what was in the main buffer, and the main buffer
      now writes to what was the snapshot buffer.
      
      To free the snapshot buffer, a '0' is written into the snapshot file.
      
      To clear the snapshot buffer, any number but a '0' or '1' is written
      into the snapshot file. But if the file is not allocated it returns
      -EINVAL error code. This is rather pointless. It is better just to
      do nothing and return success.
      Acked-by: default avatarHiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      c9960e48
    • Steven Rostedt (Red Hat)'s avatar
      tracing: Add help of snapshot feature when snapshot is empty · d8741e2e
      Steven Rostedt (Red Hat) authored
      When cat'ing the snapshot file, instead of showing an empty trace
      header like the trace file does, show how to use the snapshot
      feature.
      
      Also, this is a good place to show if the snapshot has been allocated
      or not. Users may want to "pre allocate" the snapshot to have a fast
      "swap" of the current buffer. Otherwise, a swap would be slow and might
      fail as it would need to allocate the snapshot buffer, and that might
      fail under tight memory constraints.
      
      Here's what it looked like before:
      
       # tracer: nop
       #
       # entries-in-buffer/entries-written: 0/0   #P:4
       #
       #                              _-----=> irqs-off
       #                             / _----=> need-resched
       #                            | / _---=> hardirq/softirq
       #                            || / _--=> preempt-depth
       #                            ||| /     delay
       #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
       #              | |       |   ||||       |         |
      
      Here's what it looks like now:
      
       # tracer: nop
       #
       #
       # * Snapshot is freed *
       #
       # Snapshot commands:
       # echo 0 > snapshot : Clears and frees snapshot buffer
       # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
       #                      Takes a snapshot of the main buffer.
       # echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
       #                      (Doesn't have to be '2' works with any number that
       #                       is not a '0' or '1')
      Acked-by: default avatarHiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      d8741e2e
  7. 28 Feb, 2013 2 commits
  8. 20 Feb, 2013 9 commits
    • Ingo Molnar's avatar
      Merge branch 'tip/perf/core' of... · ff1fb5f6
      Ingo Molnar authored
      Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent
      
      Pull two fixes from Steven Rostedt.
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      ff1fb5f6
    • Stephane Eranian's avatar
      perf/x86: Add Intel IvyBridge event scheduling constraints · 69943182
      Stephane Eranian authored
      Intel IvyBridge processor has different constraints compared
      to SandyBridge. Therefore it needs its own contraint table.
      This patch adds the constraint table.
      
      Without this patch, the events listed in the patch may not be
      scheduled correctly and bogus counts may be collected.
      Signed-off-by: default avatarStephane Eranian <eranian@google.com>
      Cc: peterz@infradead.org
      Cc: ak@linux.intel.com
      Cc: acme@redhat.com
      Cc: jolsa@redhat.com
      Cc: namhyung.kim@lge.com
      Link: http://lkml.kernel.org/r/1361355312-3323-1-git-send-email-eranian@google.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      69943182
    • Linus Torvalds's avatar
      Merge branch 'for-3.9-async' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq · ece8e0b2
      Linus Torvalds authored
      Pull async changes from Tejun Heo:
       "These are followups for the earlier deadlock issue involving async
        ending up waiting for itself through block requesting module[1].  The
        following changes are made by these commits.
      
         - Instead of requesting default elevator on each request_queue init,
           block now requests it once early during boot.
      
         - Kmod triggers warning if invoked from an async worker.
      
         - Async synchronization implementation has been reimplemented.  It's
           a lot simpler now."
      
      * 'for-3.9-async' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
        async: initialise list heads to fix crash
        async: replace list of active domains with global list of pending items
        async: keep pending tasks on async_domain and remove async_pending
        async: use ULLONG_MAX for infinity cookie value
        async: bring sanity to the use of words domain and running
        async, kmod: warn on synchronous request_module() from async workers
        block: don't request module during elevator init
        init, block: try to load default elevator module early during boot
      ece8e0b2
    • Linus Torvalds's avatar
      Merge branch 'for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq · 67cb104b
      Linus Torvalds authored
      Pull workqueue changes from Tejun Heo:
       "A lot of reorganization is going on mostly to prepare for worker pools
        with custom attributes so that workqueue can replace custom pool
        implementations in places including writeback and btrfs and make CPU
        assignment in crypto more flexible.
      
        workqueue evolved from purely per-cpu design and implementation, so
        there are a lot of assumptions regarding being bound to CPUs and even
        unbound workqueues are implemented as an extension of the model -
        workqueues running on the special unbound CPU.  Bulk of changes this
        round are about promoting worker_pools as the top level abstraction
        replacing global_cwq (global cpu workqueue).  At this point, I'm
        fairly confident about getting custom worker pools working pretty soon
        and ready for the next merge window.
      
        Lai's patches are replacing the convoluted mb() dancing workqueue has
        been doing with much simpler mechanism which only depends on
        assignment atomicity of long.  For details, please read the commit
        message of 0b3dae68 ("workqueue: simplify is-work-item-queued-here
        test").  While the change ends up adding one pointer to struct
        delayed_work, the inflation in percentage is less than five percent
        and it decouples delayed_work logic a lot more cleaner from usual work
        handling, removes the unusual memory barrier dancing, and allows for
        further simplification, so I think the trade-off is acceptable.
      
        There will be two more workqueue related pull requests and there are
        some shared commits among them.  I'll write further pull requests
        assuming this pull request is pulled first."
      
      * 'for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (37 commits)
        workqueue: un-GPL function delayed_work_timer_fn()
        workqueue: rename cpu_workqueue to pool_workqueue
        workqueue: reimplement is_chained_work() using current_wq_worker()
        workqueue: fix is_chained_work() regression
        workqueue: pick cwq instead of pool in __queue_work()
        workqueue: make get_work_pool_id() cheaper
        workqueue: move nr_running into worker_pool
        workqueue: cosmetic update in try_to_grab_pending()
        workqueue: simplify is-work-item-queued-here test
        workqueue: make work->data point to pool after try_to_grab_pending()
        workqueue: add delayed_work->wq to simplify reentrancy handling
        workqueue: make work_busy() test WORK_STRUCT_PENDING first
        workqueue: replace WORK_CPU_NONE/LAST with WORK_CPU_END
        workqueue: post global_cwq removal cleanups
        workqueue: rename nr_running variables
        workqueue: remove global_cwq
        workqueue: remove worker_pool->gcwq
        workqueue: replace for_each_worker_pool() with for_each_std_worker_pool()
        workqueue: make freezing/thawing per-pool
        workqueue: make hotplug processing per-pool
        ...
      67cb104b
    • Linus Torvalds's avatar
      Merge branch 'for-3.9-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq · 1eaec821
      Linus Torvalds authored
      Pull workqueue [delayed_]work_pending() cleanups from Tejun Heo:
       "This is part of on-going cleanups to remove / minimize usages of
        workqueue interfaces which are deprecated and/or misleading.
      
        This round drops a number of usages of [delayed_]work_pending(), which
        are dangerous as they lack any form of synchronization and thus often
        lead to buggy / unnecessary code.  There are a couple legitimate use
        cases in kernel.  Hopefully, they can be converted and
        [delayed_]work_pending() can be removed completely.  Even if not,
        removing most of misuses should make it more difficult to find
        examples of misuses and thus slow down growth of them.
      
        These changes are independent from other workqueue changes."
      
      * 'for-3.9-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
        wimax/i2400m: fix i2400m->wake_tx_skb handling
        kprobes: fix wait_for_kprobe_optimizer()
        ipw2x00: simplify scan_event handling
        video/exynos: don't use [delayed_]work_pending()
        tty/max3100: don't use [delayed_]work_pending()
        x86/mce: don't use [delayed_]work_pending()
        rfkill: don't use [delayed_]work_pending()
        wl1251: don't use [delayed_]work_pending()
        thinkpad_acpi: don't use [delayed_]work_pending()
        mwifiex: don't use [delayed_]work_pending()
        sja1000: don't use [delayed_]work_pending()
      1eaec821
    • Linus Torvalds's avatar
      Merge branch 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 1a13c0b1
      Linus Torvalds authored
      Pull x86 UV3 support update from Ingo Molnar:
       "Support for the SGI Ultraviolet System 3 (UV3) platform - the upcoming
        third major iteration and upscaling of the SGI UV supercomputing
        platform."
      
      * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86, uv, uv3: Trim MMR register definitions after code changes for SGI UV3
        x86, uv, uv3: Check current gru hub support for SGI UV3
        x86, uv, uv3: Update Time Support for SGI UV3
        x86, uv, uv3: Update x2apic Support for SGI UV3
        x86, uv, uv3: Update Hub Info for SGI UV3
        x86, uv, uv3: Update ACPI Check to include SGI UV3
        x86, uv, uv3: Update MMR register definitions for SGI Ultraviolet System 3 (UV3)
      1a13c0b1
    • Linus Torvalds's avatar
      Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · f98982ce
      Linus Torvalds authored
      Pull x86 platform changes from Ingo Molnar:
      
       - Support for the Technologic Systems TS-5500 platform, by Vivien
         Didelot
      
       - Improved NUMA support on AMD systems:
      
         Add support for federated systems where multiple memory controllers
         can exist and see each other over multiple PCI domains.  This
         basically means that AMD node ids can be more than 8 now and the code
         handling this is taught to incorporate PCI domain into those IDs.
      
       - Support for the Goldfish virtual Android emulator, by Jun Nakajima,
         Intel, Google, et al.
      
       - Misc fixlets.
      
      * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86: Add TS-5500 platform support
        x86/srat: Simplify memory affinity init error handling
        x86/apb/timer: Remove unnecessary "if"
        goldfish: platform device for x86
        amd64_edac: Fix type usage in NB IDs and memory ranges
        amd64_edac: Fix PCI function lookup
        x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id
        x86, AMD, NB: Add multi-domain support
      f98982ce
    • Linus Torvalds's avatar
      Merge branch 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 29d50523
      Linus Torvalds authored
      Pull x86/hyperv changes from Ingo Molnar:
       "The biggest change is support for Windows 8's improved hypervisor
        interrupt model on the Linux Hyper-V guest subsystem code side.
      
        Smallish fixes otherwise."
      
      * 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86, hyperv: HYPERV depends on X86_LOCAL_APIC
        X86: Handle Hyper-V vmbus interrupts as special hypervisor interrupts
        X86: Add a check to catch Xen emulation of Hyper-V
        x86: Hyper-V: register clocksource only if its advertised
      29d50523
    • Linus Torvalds's avatar
      Merge branch 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 026f149c
      Linus Torvalds authored
      Pull x86/debug changes from Ingo Molnar:
       "Two init annotations and a built-in memtest speedup"
      
      * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86/memtest: Shorten time for tests
        x86: Convert a few mistaken __cpuinit annotations to __init
        x86/EFI: Properly init-annotate BGRT code
      026f149c