- 13 Mar, 2019 40 commits
-
-
Ronnie Sahlberg authored
[ Upstream commit 58d15ed1 ] The size of the fixed part of the create response is 88 bytes not 56. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Wei Huang authored
[ Upstream commit b677dfae ] In some old AMD KVM implementation, guest's EFER.LME bit is cleared by KVM when the hypervsior detects that the guest sets CR0.PG to 0. This causes the guest OS to reboot when it tries to return from 32-bit trampoline code because the CPU is in incorrect state: CR4.PAE=1, CR0.PG=1, CS.L=1, but EFER.LME=0. As a precaution, set EFER.LME=1 as part of long mode activation procedure. This extra step won't cause any harm when Linux is booted on a bare-metal machine. Signed-off-by:
Wei Huang <wei@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: bp@alien8.de Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20190104054411.12489-1-wei@redhat.comSigned-off-by:
-
Harini Katakam authored
[ Upstream commit e501070e ] The interrupt handler contains a workaround for RX hang applicable to Zynq and AT91RM9200 only. Subsequent versions do not need this workaround. This workaround unnecessarily resets RX whenever RX used bit read is observed, which can be often under heavy traffic. There is no other action performed on RX UBR interrupt. Hence introduce a CAPS mask; enable this interrupt and workaround only on affected versions. Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sinan Kaya authored
[ Upstream commit 0ee4b5f8 ] Add BACKLIGHT_LCD_SUPPORT for SAMSUNG_Q10 to fix the warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE. SAMSUNG_Q10 selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT. Copy BACKLIGHT_LCD_SUPPORT dependency into SAMSUNG_Q10 to fix: WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by [y]: - SAMSUNG_Q10 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] Signed-off-by:
Sinan Kaya <okaya@kernel.org> Acked-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Sinan Kaya authored
[ Upstream commit d58bf90a ] Add BACKLIGHT_LCD_SUPPORT for ACPI_CMPC to fix the warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE. ACPI_CMPC selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT. Copy BACKLIGHT_LCD_SUPPORT dependency into ACPI_CMPC to fix WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by [y]: - ACPI_CMPC [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] && INPUT [=y] && (RFKILL [=n] || RFKILL [=n]=n) Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 8437fcf1 ] The "hostdata->dev" pointer is NULL here. We set "hostdata->dev = dev;" later in the function and we also use "hostdata->dev" when we call dma_free_attrs() in NCR_700_release(). This bug predates git version control. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit b2d3492f ] There are two issues here. First if cmgr->hba is not set early enough then it leads to a NULL dereference. Second if we don't completely initialize cmgr->io_bdt_pool[] then we end up dereferencing uninitialized pointers. Fixes: 853e2bd2 ("[SCSI] bnx2fc: Broadcom FCoE offload driver") Signed-off-by:
-
Douglas Gilbert authored
[ Upstream commit 40d07b52 ] The WRITE SAME(10) and (16) implementations didn't take account of the buffer wrap required when the virtual_gb parameter is greater than 0. Fix that and rename the fake_store() function to lba2fake_store() to lessen confusion with the global fake_storep pointer. Bump version date. Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reported-by:
Bart Van Assche <bvanassche@acm.org> Tested by: Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Ming Lu authored
[ Upstream commit 5d8fc4a9 ] The issue to be fixed in this commit is when libfc found it received a invalid FLOGI response from FC switch, it would return without freeing the fc frame, which is just the skb data. This would cause memory leak if FC switch keeps sending invalid FLOGI responses. This fix is just to make it execute `fc_frame_free(fp)` before returning from function `fc_lport_flogi_resp`. Signed-off-by:
Ming Lu <ming.lu@citrix.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Manish Chopra authored
[ Upstream commit ffb057f9 ] KASAN reported following bug in qed_init_qm_get_idx_from_flags due to inappropriate casting of "pq_flags". Fix the type of "pq_flags". [ 196.624707] BUG: KASAN: stack-out-of-bounds in qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed] [ 196.624712] Read of size 8 at addr ffff809b00bc7360 by task kworker/0:9/1712 [ 196.624714] [ 196.624720] CPU: 0 PID: 1712 Comm: kworker/0:9 Not tainted 4.18.0-60.el8.aarch64+debug #1 [ 196.624723] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL024 09/26/2018 [ 196.624733] Workqueue: events work_for_cpu_fn [ 196.624738] Call trace: [ 196.624742] dump_backtrace+0x0/0x2f8 [ 196.624745] show_stack+0x24/0x30 [ 196.624749] dump_stack+0xe0/0x11c [ 196.624755] print_address_description+0x68/0x260 [ 196.624759] kasan_report+0x178/0x340 [ 196.624762] __asan_report_load_n_noabort+0x38/0x48 [ 196.624786] qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed] [ 196.624808] qed_init_qm_info+0xec0/0x2200 [qed] [ 196.624830] qed_resc_alloc+0x284/0x7e8 [qed] [ 196.624853] qed_slowpath_start+0x6cc/0x1ae8 [qed] [ 196.624864] __qede_probe.isra.10+0x1cc/0x12c0 [qede] [ 196.624874] qede_probe+0x78/0xf0 [qede] [ 196.624879] local_pci_probe+0xc4/0x180 [ 196.624882] work_for_cpu_fn+0x54/0x98 [ 196.624885] process_one_work+0x758/0x1900 [ 196.624888] worker_thread+0x4e0/0xd18 [ 196.624892] kthread+0x2c8/0x350 [ 196.624897] ret_from_fork+0x10/0x18 [ 196.624899] [ 196.624902] Allocated by task 2: [ 196.624906] kasan_kmalloc.part.1+0x40/0x108 [ 196.624909] kasan_kmalloc+0xb4/0xc8 [ 196.624913] kasan_slab_alloc+0x14/0x20 [ 196.624916] kmem_cache_alloc_node+0x1dc/0x480 [ 196.624921] copy_process.isra.1.part.2+0x1d8/0x4a98 [ 196.624924] _do_fork+0x150/0xfa0 [ 196.624926] kernel_thread+0x48/0x58 [ 196.624930] kthreadd+0x3a4/0x5a0 [ 196.624932] ret_from_fork+0x10/0x18 [ 196.624934] [ 196.624937] Freed by task 0: [ 196.624938] (stack is not available) [ 196.624940] [ 196.624943] The buggy address belongs to the object at ffff809b00bc0000 [ 196.624943] which belongs to the cache thread_stack of size 32768 [ 196.624946] The buggy address is located 29536 bytes inside of [ 196.624946] 32768-byte region [ffff809b00bc0000, ffff809b00bc8000) [ 196.624948] The buggy address belongs to the page: [ 196.624952] page:ffff7fe026c02e00 count:1 mapcount:0 mapping:ffff809b4001c000 index:0x0 compound_mapcount: 0 [ 196.624960] flags: 0xfffff8000008100(slab|head) [ 196.624967] raw: 0fffff8000008100 dead000000000100 dead000000000200 ffff809b4001c000 [ 196.624970] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 196.624973] page dumped because: kasan: bad access detected [ 196.624974] [ 196.624976] Memory state around the buggy address: [ 196.624980] ffff809b00bc7200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624983] ffff809b00bc7280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624985] >ffff809b00bc7300: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 [ 196.624988] ^ [ 196.624990] ffff809b00bc7380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624993] ffff809b00bc7400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624995] ================================================================== Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 7c81626a ] Cache number of fragments in the skb locally as in case of linear skb (with zero fragments), tx completion (or freeing of skb) may happen before driver tries to get number of frgaments from the skb which could lead to stale access to an already freed skb. Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 327852ec ] VFs may hit VF-PF channel timeout while probing, as in some cases it was observed that VF FLR and VF "acquire" message transaction (i.e first message from VF to PF in VF's probe flow) could occur simultaneously which could lead VF to fail sending "acquire" message to PF as VF is marked disabled from HW perspective due to FLR, which will result into channel timeout and VF probe failure. In such cases, try retrying VF "acquire" message so that in later attempts it could be successful to pass message to PF after the VF FLR is completed and can be probed successfully. Signed-off-by:
-
Manish Chopra authored
[ Upstream commit ff929696 ] VF is always configured to drop control frames (with reserved mac addresses) but to work LACP on the VFs, it would require LACP control frames to be forwarded or transmitted successfully. This patch fixes this in such a way that trusted VFs (marked through ndo_set_vf_trust) would be allowed to pass the control frames such as LACP pdus. Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 9e71a15d ] When running tx switched traffic between VNICs created via a bridge(to which VFs are added), adapter drops the unicast packets in tx flow due to VNIC's ucast mac being unknown to it. But VF interfaces being in promiscuous mode should have caused adapter to accept all the unknown ucast packets. Later, it was found that driver doesn't really configure tx promiscuous mode settings to accept all unknown unicast macs. This patch fixes tx promiscuous mode settings to accept all unknown/unmatched unicast macs and works out the scenario. Signed-off-by:
-
Yao Liu authored
[ Upstream commit 80ff0017 ] There is a NULL pointer dereference of dev_name in nfs_parse_devname() The oops looks something like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:nfs_fs_mount+0x3b6/0xc20 [nfs] ... Call Trace: ? ida_alloc_range+0x34b/0x3d0 ? nfs_clone_super+0x80/0x80 [nfs] ? nfs_free_parsed_mount_data+0x60/0x60 [nfs] mount_fs+0x52/0x170 ? __init_waitqueue_head+0x3b/0x50 vfs_kern_mount+0x6b/0x170 do_mount+0x216/0xdc0 ksys_mount+0x83/0xd0 __x64_sys_mount+0x25/0x30 do_syscall_64+0x65/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix this by adding a NULL check on dev_name Signed-off-by:
Yao Liu <yotta.liu@ucloud.cn> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Fathi Boudra authored
[ Upstream commit 7d4e591b ] posix_timers fails to build due to undefined reference errors: aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -O2 -pipe -g -feliminate-unused-debug-types -O3 -Wl,-no-as-needed -Wall -DKTEST -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lrt -lpthread posix_timers.c -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers /tmp/cc1FTZzT.o: In function `check_timer_create': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:157: undefined reference to `timer_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:170: undefined reference to `timer_settime' collect2: error: ld returned 1 exit status It's GNU Make and linker specific. The default Makefile rule looks like: $(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS) When linking is done by gcc itself, no issue, but when it needs to be passed to proper ld, only LDLIBS follows and then ld cannot know what libs to link with. More detail: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html LDFLAGS Extra flags to give to compilers when they are supposed to invoke the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable instead. LDLIBS Library flags or names given to compilers when they are supposed to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS variable. https://lkml.org/lkml/2010/2/10/362 tools/perf: libraries must come after objects Link order matters, use LDLIBS instead of LDFLAGS to properly link against libpthread. Signed-off-by:
Denys Dmytriyenko <denys@ti.com> Signed-off-by:
Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by:
Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Fathi Boudra authored
[ Upstream commit 870f193d ] reuseport_bpf_numa fails to build due to undefined reference errors: aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lnuma reuseport_bpf_numa.c -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa /tmp/ccfUuExT.o: In function `send_from_node': /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:138: undefined reference to `numa_run_on_node' /tmp/ccfUuExT.o: In function `main': /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:230: undefined reference to `numa_available' /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:233: undefined reference to `numa_max_node' It's GNU Make and linker specific. The default Makefile rule looks like: $(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS) When linking is done by gcc itself, no issue, but when it needs to be passed to proper ld, only LDLIBS follows and then ld cannot know what libs to link with. More detail: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html LDFLAGS Extra flags to give to compilers when they are supposed to invoke the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable instead. LDLIBS Library flags or names given to compilers when they are supposed to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS variable. https://lkml.org/lkml/2010/2/10/362 tools/perf: libraries must come after objects Link order matters, use LDLIBS instead of LDFLAGS to properly link against libnuma. Signed-off-by:
-
Andrew Lunn authored
[ Upstream commit 7ae710f9 ] On SoC reset all GPIO interrupts are disable. However, if kexec is used to boot into a new kernel, the SoC does not experience a reset. Hence GPIO interrupts can be left enabled from the previous kernel. It is then possible for the interrupt to fire before an interrupt handler is registered, resulting in the kernel complaining of an "unexpected IRQ trap", the interrupt is never cleared, and so fires again, resulting in an interrupt storm. Disable all GPIO interrupts before registering the GPIO IRQ chip. Fixes: 7f2691a1 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 2035f3ff ] Unlike ip(6)tables ebtables only counts user-defined chains. The effect is that a 32bit ebtables binary on a 64bit kernel can do 'ebtables -N FOO' only after adding at least one rule, else the request fails with -EINVAL. This is a similar fix as done in 3f1e53ab ("netfilter: ebtables: don't attempt to allocate 0-sized compat array"). Fixes: 7d7d7e02 ("netfilter: compat: reject huge allocation requests") Reported-by:
Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit c69c29a1 ] If phy_power_on() fails in rk_gmac_powerup(), clocks are left enabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit cec8abba ] When reading phy registers via Clause 45 MDIO protocol, after write address operation, the driver use another write address operation, so can not read the right value of any phy registers. This patch fixes it. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit ed29ca8b ] The hns driver of earlier devices, when autoneg off, restart autoneg will return -EINVAL, so make the hns driver for the latest devices do the same. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 263c6d75 ] In hns enet driver, we use of_parse_handle() to get hold of the device node related to "ae-handle" but we have missed to put the node reference using of_node_put() after we are done using the node. This patch fixes it. Note: This problem is stated in Link: https://lkml.org/lkml/2018/12/22/217 Fixes: 48189d6a ("net: hns: enet specifies a reference to dsaf") Reported-by:
-
Tomonori Sakita authored
[ Upstream commit 6571ebce ] If fill_level was not zero and status was not BUSY, result of "tx_prod - tx_cons - inuse" might be zero. Subtracting 1 unconditionally results invalid negative return value on this case. Make sure not to return an negative value. Signed-off-by:
Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by:
Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Reviewed-by:
Dalon L Westergreen <dalon.westergreen@linux.intel.com> Acked-by:
Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by:
-
Max Filippov authored
[ Upstream commit 25384ce5 ] This fixes the following warning at boot when the kernel is booted on a board with more CPU cores than was configured in NR_CPUS: smp_init_cpus: Core Count = 8 smp_init_cpus: Core Id = 0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at include/linux/cpumask.h:121 smp_init_cpus+0x54/0x74 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc3-00015-g1459333f88a0 #124 Call Trace: __warn$part$3+0x6a/0x7c warn_slowpath_null+0x35/0x3c smp_init_cpus+0x54/0x74 setup_arch+0x1c0/0x1d0 start_kernel+0x44/0x310 _startup+0x107/0x107 Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 4ea899ea ] Introduce a local wait_for_completion variable to avoid an access to the potentially freed dio struture after dropping the last reference count. Also use the chance to document the completion behavior to make the refcounting clear to the reader of the code. Fixes: ff6a9292 ("iomap: implement direct I/O") Reported-by:
Chandan Rajendra <chandan@linux.ibm.com> Reported-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
-
Piotr Jaroszynski authored
[ Upstream commit 8e47a457 ] migrate_page_move_mapping() expects pages with private data set to have a page_count elevated by 1. This is what used to happen for xfs through the buffer_heads code before the switch to iomap in commit 82cb1417 ("xfs: add support for sub-pagesize writeback without buffer_heads"). Not having the count elevated causes move_pages() to fail on memory mapped files coming from xfs. Make iomap compatible with the migrate_page_move_mapping() assumption by elevating the page count as part of iomap_page_create() and lowering it in iomap_page_release(). It causes the move_pages() syscall to misbehave on memory mapped files from xfs. It does not not move any pages, which I suppose is "just" a perf issue, but it also ends up returning a positive number which is out of spec for the syscall. Talking to Michal Hocko, it sounds like returning positive numbers might be a necessary update to move_pages() anyway though. Fixes: 82cb1417 ("xfs: add support for sub-pagesize writeback without buffer_heads") Signed-off-by:
Piotr Jaroszynski <pjaroszynski@nvidia.com> [hch: actually get/put the page iomap_migrate_page() to make it work properly] Signed-off-by:
-
Max Filippov authored
[ Upstream commit 8b1c42cd ] Otherwise it is impossible to enable CPUs after booting with 'maxcpus' parameter. Signed-off-by:
-
Max Filippov authored
[ Upstream commit 306b3830 ] Secondary CPU reset vector overlaps part of the double exception handler code, resulting in weird crashes and hangups when running user code. Move exception vectors one page up so that they don't clash with the secondary CPU reset vector. Signed-off-by:
-
Max Filippov authored
[ Upstream commit 32a7726c ] - add missing memory barriers to the secondary CPU synchronization spin loops; add comment to the matching memory barrier in the boot_secondary and __cpu_die functions; - use READ_ONCE/WRITE_ONCE to access cpu_start_id/cpu_start_ccount instead of reading/writing them directly; - re-initialize cpu_running every time before starting secondary CPU to flush possible previous CPU startup results. Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 2b531b61 ] The cpu-hotplug test assumes that we can offline the maximum CPU as described by /sys/devices/system/cpu/offline. However, in the case where the number of CPUs exceeds like kernel configuration then the offline count can be greater than the present count and we end up trying to test the offlining of a CPU that is not available to offline. Fix this by testing the maximum present CPU instead. Also, the test currently offlines the CPU and does not online it, so fix this by onlining the CPU after the test. Fixes: d89dffa9 ("fault-injection: add selftests for cpu and memory hotplug") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Feras Daoud authored
[ Upstream commit 6ab4aba0 ] The following BUG was reported by kasan: BUG: KASAN: use-after-free in ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] Read of size 80 at addr ffff88034c30bcd0 by task kworker/u16:1/24020 Workqueue: ipoib_wq ipoib_cm_tx_start [ib_ipoib] Call Trace: dump_stack+0x9a/0xeb print_address_description+0xe3/0x2e0 kasan_report+0x18a/0x2e0 ? ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] memcpy+0x1f/0x50 ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib] ? kvm_clock_read+0x1f/0x30 ? ipoib_cm_skb_reap+0x610/0x610 [ib_ipoib] ? __lock_is_held+0xc2/0x170 ? process_one_work+0x880/0x1960 ? process_one_work+0x912/0x1960 process_one_work+0x912/0x1960 ? wq_pool_ids_show+0x310/0x310 ? lock_acquire+0x145/0x440 worker_thread+0x87/0xbb0 ? process_one_work+0x1960/0x1960 kthread+0x314/0x3d0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x3a/0x50 Allocated by task 0: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0x168/0x3e0 path_rec_create+0xa2/0x1f0 [ib_ipoib] ipoib_start_xmit+0xa98/0x19e0 [ib_ipoib] dev_hard_start_xmit+0x159/0x8d0 sch_direct_xmit+0x226/0xb40 __dev_queue_xmit+0x1d63/0x2950 neigh_update+0x889/0x1770 arp_process+0xc47/0x21f0 arp_rcv+0x462/0x760 __netif_receive_skb_core+0x1546/0x2da0 netif_receive_skb_internal+0xf2/0x590 napi_gro_receive+0x28e/0x390 ipoib_ib_handle_rx_wc_rss+0x873/0x1b60 [ib_ipoib] ipoib_rx_poll_rss+0x17d/0x320 [ib_ipoib] net_rx_action+0x427/0xe30 __do_softirq+0x28e/0xc42 Freed by task 26680: __kasan_slab_free+0x11d/0x160 kfree+0xf5/0x360 ipoib_flush_paths+0x532/0x9d0 [ib_ipoib] ipoib_set_mode_rss+0x1ad/0x560 [ib_ipoib] set_mode+0xc8/0x150 [ib_ipoib] kernfs_fop_write+0x279/0x440 __vfs_write+0xd8/0x5c0 vfs_write+0x15e/0x470 ksys_write+0xb8/0x180 do_syscall_64+0x9b/0x420 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff88034c30bcc8 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 8 bytes inside of 512-byte region [ffff88034c30bcc8, ffff88034c30bec8) The buggy address belongs to the page: The following race between change mode and xmit flow is the reason for this use-after-free: Change mode Send packet 1 to GID XX Send packet 2 to GID XX | | | start | | | | | | | | | Create new path for GID XX | | and update neigh path | | | | | | | | | | flush_paths | | | | queue_work(cm.start_task) | | Path for GID XX not found | create new path | | start_task runs with old released path There is no locking to protect the lifetime of the path through the ipoib_cm_tx struct, so delete it entirely and always use the newly looked up path under the priv->lock. Fixes: 546481c2 ("IB/ipoib: Fix memory corruption in ipoib cm mode connect flow") Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Reviewed-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Alexandre Ghiti authored
[ Upstream commit ae662eec ] This ratio is the most used among all other architectures and make icache_hygiene libhugetlbfs test pass: this test mmap lots of hugepages whose addresses, without this patch, reach the end of the process user address space. Signed-off-by:
Alexandre Ghiti <aghiti@upmem.com> Reviewed-by:
Palmer Dabbelt <palmer@sifive.com> Signed-off-by:
-
Max Filippov authored
[ Upstream commit 4fe8713b ] ccount_timer_shutdown is called from the atomic context in the secondary_start_kernel, resulting in the following BUG: BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1 Preemption disabled at: secondary_start_kernel+0xa1/0x130 Call Trace: ___might_sleep+0xe7/0xfc __might_sleep+0x41/0x44 synchronize_irq+0x24/0x64 disable_irq+0x11/0x14 ccount_timer_shutdown+0x12/0x20 clockevents_switch_state+0x82/0xb4 clockevents_exchange_device+0x54/0x60 tick_check_new_device+0x46/0x70 clockevents_register_device+0x8c/0xc8 clockevents_config_and_register+0x1d/0x2c local_timer_setup+0x75/0x7c secondary_start_kernel+0xb4/0x130 should_never_return+0x32/0x35 Use disable_irq_nosync instead of disable_irq to avoid it. This is safe because the ccount timer IRQ is per-CPU, and once IRQ is masked the ISR will not be called. Signed-off-by:
-
Taniya Das authored
[ Upstream commit 9ff1a3b4 ] The clocks of the CPUSS such as "gcc_cpuss_ahb_clk_src" is a CRITICAL clock and needs to vote on the active only source of XO, so as to keep the vote as long as CPUSS is active. Similar rbcpr_clk_src is also has the same requirement. Signed-off-by:
Taniya Das <tdas@codeaurora.org> Fixes: 06391edd ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 303aef8b ] The ti_clk_parse_divider_data() function is only called from _get_div_table_from_setup(). That function doesn't look at the return value but instead looks at the "*table" pointer. In this case, if the kcalloc() fails then *table is NULL (which means success). It should instead be an error pointer. The ti_clk_parse_divider_data() function has two callers. One checks for errors and the other doesn't. I have fixed it so now both handle errors. Fixes: 4f6be565 ("clk: ti: divider: add driver internal API for parsing divider data") Signed-off-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
Suravee Suthikulpanit authored
[ Upstream commit 9825bd94 ] When a VM is terminated, the VFIO driver detaches all pass-through devices from VFIO domain by clearing domain id and page table root pointer from each device table entry (DTE), and then invalidates the DTE. Then, the VFIO driver unmap pages and invalidate IOMMU pages. Currently, the IOMMU driver keeps track of which IOMMU and how many devices are attached to the domain. When invalidate IOMMU pages, the driver checks if the IOMMU is still attached to the domain before issuing the invalidate page command. However, since VFIO has already detached all devices from the domain, the subsequent INVALIDATE_IOMMU_PAGES commands are being skipped as there is no IOMMU attached to the domain. This results in data corruption and could cause the PCI device to end up in indeterministic state. Fix this by invalidate IOMMU pages when detach a device, and before decrementing the per-domain device reference counts. Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by:
Joerg Roedel <joro@8bytes.org> Co-developed-by:
Brijesh Singh <brijesh.singh@amd.com> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Fixes: 6de8ad9b ('x86/amd-iommu: Make iommu_flush_pages aware of multiple IOMMUs') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
ZhangXiaoxu authored
[ Upstream commit 53ab60ba ] There is a UBSAN bug report as below: UBSAN: Undefined behaviour in net/netfilter/ipvs/ip_vs_ctl.c:2227:21 signed integer overflow: -2147483647 * 1000 cannot be represented in type 'int' Reproduce program: #include <stdio.h> #include <sys/types.h> #include <sys/socket.h> #define IPPROTO_IP 0 #define IPPROTO_RAW 255 #define IP_VS_BASE_CTL (64+1024+64) #define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10) /* The argument to IP_VS_SO_GET_TIMEOUT */ struct ipvs_timeout_t { int tcp_timeout; int tcp_fin_timeout; int udp_timeout; }; int main() { int ret = -1; int sockfd = -1; struct ipvs_timeout_t to; sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_RAW); if (sockfd == -1) { printf("socket init error\n"); return -1; } to.tcp_timeout = -2147483647; to.tcp_fin_timeout = -2147483647; to.udp_timeout = -2147483647; ret = setsockopt(sockfd, IPPROTO_IP, IP_VS_SO_SET_TIMEOUT, (char *)(&to), sizeof(to)); printf("setsockopt return %d\n", ret); return ret; } Return -EINVAL if the timeout value is negative or max than 'INT_MAX / HZ'. Signed-off-by:
ZhangXiaoxu <zhangxiaoxu5@huawei.com> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Guo Ren authored
[ Upstream commit 28198c46 ] max_low_pfn should be pfn_size not byte_size. Signed-off-by:
Guo Ren <ren_guo@c-sky.com> Signed-off-by:
Mao Han <mao_han@c-sky.com> Signed-off-by:
-
Jerry Snitselaar authored
[ Upstream commit f1724c08 ] In the error path of map_sg there is an incorrect if condition for breaking out of the loop that searches the scatterlist for mapped pages to unmap. Instead of breaking out of the loop once all the pages that were mapped have been unmapped, it will break out of the loop after it has unmapped 1 page. Fix the condition, so it breaks out of the loop only after all the mapped pages have been unmapped. Fixes: 80187fd3 ("iommu/amd: Optimize map_sg and unmap_sg") Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by:
Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by:
-
