- 20 Jul, 2018 5 commits
-
-
Anusha Srivatsa authored
This patch fixes the commit - <2efbb2f0> ("i915/dp/dsc: Add DSC PPS register definitions"), which did not have _MMIO() for DSCA and DSCC. v2: Fix typos. (manasi) v3: Change the commit message (Rodrigo) Cc: Rodrigi Vivi <rodrigo.vivi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1532122962-9068-1-git-send-email-anusha.srivatsa@intel.com
-
Rodrigo Vivi authored
First of all don't try to read dpcd if PSR is not even supported. But also, if read failed return -EIO instead of reporting via a backchannel. v2: fix dev_priv: At this level m->private is the connector. (CI/DK) don't convert dpcd read errors to EIO. (DK) Fixes: 5b7b3086 ("drm/i915/psr: Split sink status into a separate debugfs node") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180720003155.16290-1-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
Just a small clean-up with no functional change, only removing a variable that is never actually used. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180719234217.7855-1-rodrigo.vivi@intel.com
-
Chris Wilson authored
Not all chipsets have an internal buffer delaying the visibility of writes via the GGTT being visible by other physical paths, but we use a very heavy workaround for all. We only need to apply that workarounds to the chipsets we know suffer from the delay and the resulting coherency issue. Similarly, the same inconsistent coherency fouls up our ABI promise that a write into a mmap_gtt is immediately visible to others. Since the HW has made that a lie, let userspace know when that contract is broken. (Not that userspace would want to use mmap_gtt on those chipsets for other performance reasons...) Testcase: igt/drv_selftest/live_coherency Testcase: igt/gem_mmap_gtt/coherency Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100587Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Tomasz Lis <tomasz.lis@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180720101910.11153-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Another step in the drv_module_reload fault-injection saga, is that we try to disable the guc twice. Probably. It's a little unclear exactly what is going on in the unload sequence that catches us out, so for the time being suppress the assertion to get the test re-enabled. Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180720095144.5885-1-chris@chris-wilson.co.uk
-
- 19 Jul, 2018 15 commits
-
-
Paulo Zanoni authored
Use the hardcoded tables provided by our spec. v2: - SSC stays disabled. - Use intel_port_is_tc(). Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180711215909.23945-2-paulo.r.zanoni@intel.com
-
Azhar Shaikh authored
On KBL, WHL RVPs, booting up with an external display connected, triggers below warning, when the BiOS brings up the external display too. This warning is not seen during hotplug. [ 3.615226] ------------[ cut here ]------------ [ 3.619829] plane 1A assertion failure (expected on, current off) [ 3.632039] WARNING: CPU: 2 PID: 354 at drivers/gpu/drm/i915/intel_display.c:1294 assert_plane+0x71/0xbb [ 3.633920] iwlwifi 0000:00:14.3: loaded firmware version 38.c0e03d94.0 op_mode iwlmvm [ 3.647157] Modules linked in: iwlwifi cfg80211 btusb btrtl btbcm btintel bluetooth ecdh_generic [ 3.647163] CPU: 2 PID: 354 Comm: frecon Not tainted 4.17.0-rc7-50176-g655af12d39c2 #3 [ 3.647165] Hardware name: Intel Corporation CoffeeLake Client Platform/WhiskeyLake U DDR4 ERB, BIOS CNLSFWR1.R00.X140.B00.1804040304 04/04/2018 [ 3.684509] RIP: 0010:assert_plane+0x71/0xbb [ 3.764451] Call Trace: [ 3.766888] intel_atomic_commit_tail+0xa97/0xb77 [ 3.771569] intel_atomic_commit+0x26a/0x279 [ 3.771572] drm_atomic_helper_set_config+0x5c/0x76 [ 3.780670] __drm_mode_set_config_internal+0x66/0x109 [ 3.780672] drm_mode_setcrtc+0x4c9/0x5cc [ 3.780674] ? drm_mode_getcrtc+0x162/0x162 [ 3.789774] ? drm_mode_getcrtc+0x162/0x162 [ 3.798108] drm_ioctl_kernel+0x8d/0xe4 [ 3.801926] drm_ioctl+0x27d/0x368 [ 3.805311] ? drm_mode_getcrtc+0x162/0x162 [ 3.805314] ? selinux_file_ioctl+0x14e/0x199 [ 3.805317] vfs_ioctl+0x21/0x2f [ 3.813812] do_vfs_ioctl+0x491/0x4b4 [ 3.813813] ? security_file_ioctl+0x37/0x4b [ 3.813816] ksys_ioctl+0x55/0x75 [ 3.820672] __x64_sys_ioctl+0x1a/0x1e [ 3.820674] do_syscall_64+0x51/0x5f [ 3.820678] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 3.828221] RIP: 0033:0x7b5e04953967 [ 3.835504] RSP: 002b:00007fff2eafb6f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 3.835505] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007b5e04953967 [ 3.835505] RDX: 00007fff2eafb730 RSI: 00000000c06864a2 RDI: 000000000000000f [ 3.835506] RBP: 00007fff2eafb720 R08: 0000000000000000 R09: 0000000000000000 [ 3.835507] R10: 0000000000000070 R11: 0000000000000246 R12: 000000000000000f [ 3.879988] R13: 000056bc9dd7d210 R14: 00007fff2eafb730 R15: 00000000c06864a2 [ 3.887081] Code: 48 c7 c7 06 71 a5 be 84 c0 48 c7 c2 06 fd a3 be 48 89 f9 48 0f 44 ca 84 db 48 0f 45 d7 48 c7 c7 df d3 a4 be 31 c0 e8 af a0 c0 ff <0f> 0b eb 2b 48 c7 c7 06 fd a3 be 84 c0 48 c7 c2 06 71 a5 be 48 [ 3.905845] WARNING: CPU: 2 PID: 354 at drivers/gpu/drm/i915/intel_display.c:1294 assert_plane+0x71/0xbb [ 3.920964] ---[ end trace dac692f4ac46391a ]--- The warning is seen when mode_setcrtc() is called for pipeB during bootup and before we get a mode_setcrtc() for pipeA, while doing update_crtcs() in intel_atomic_commit_tail(). Now since, plane1A is still active after commit, update_crtcs() is done for pipeA and eventually update_plane() for plane1A. intel_plane_state->ctl for plane1A is not updated since set_modecrtc() is called for pipeB. So intel_plane_state->ctl for plane 1A will be 0x0. So doing an update_plane() for plane1A, will result in clearing PLANE_CTL_ENABLE bit, and hence the warning. To fix this warning, force all active planes to recompute their states in probe. Changes in v8: - Actually add Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Changes in v7: - Move call to intel_initial_commit() after sanitize_watermarks() Otherwise the plane update will still consult potentially bogus watermarks we read out from the hardware. (Ville) - Carry Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> from v6 Changes in v6: - Handle EDEADLK for drm_atomic_get_crtc_state() and drm_atomic_add_affected_planes() - Remove optimization of calling intel_initial_commit() only when there is more than one active pipe in probe. - Avoid using intel_ types. Changes in v5: - Drop drm_modeset_lock_all_ctx() since locks will be taken later. Changes in v4: - Handle locking in intel_initial_commit() - Move the for loop inside intel_initial_commit() so that drm_atomic_commit() is called only once - Call intel_initial_commit() only for more than one active crtc on boot. - Save the return value of intel_initial_commit() and print a message in case of an error Changes in v3: - Add comments Changes in v2: - Force all planes to recompute their states.(Ville Syrjälä) - Update the commit message Signed-off-by:
Azhar Shaikh <azhar.shaikh@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
We believe we have all the kinks worked out, even for the early Valleyview devices, for whom we currently disable all ppgtt. References: 62942ed7 ("drm/i915/vlv: disable PPGTT on early revs v3") Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by:
-
Chris Wilson authored
We should we have all the kinks worked out and full-ppgtt now works reliably on gen7 (Ivybridge, Valleyview/Baytrail and Haswell). If we can let userspace have full control over their own ppgtt, it makes softpinning far more effective, in turn making GPU dispatch far more efficient by virtue of better mm segregation. On the other hand, switching over to a different GTT for every client does incur noticeable overhead, but only for very lightweight tasks. Signed-off-by:
Kenneth Graunke <kenneth@whitecape.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180717095751.1034-1-chris@chris-wilson.co.uk
-
Rodrigo Vivi authored
Signed-off-by: -
Ville Syrjälä authored
With neither LVDS or eDP no longer using intel_panel_detect() we can kill it, and the accompanying modparam. Signed-off-by:
-
Ville Syrjälä authored
We never registered any kind of lid notifier for eDP, so looking at the lid status is pretty much bonkers. Let's just consider eDP always connected instead. Signed-off-by:
-
Ville Syrjälä authored
We broke the LVDS notifier resume thing in (presumably) commit e2c8b870 ("drm/i915: Use atomic helpers for suspend, v2.") as we no longer duplicate the current state in the LVDS notifier and thus we never resume it properly either. Instead of trying to fix it again let's just kill off the lid notifier entirely. None of the machines tested thus far have apparently needed it. Originally the lid notifier was added to work around cases where the VBIOS was clobbering some of the hardware state behind the driver's back, mostly on Thinkpads. We now have a few report of Thinkpads working just fine without the notifier. So maybe it was misdiagnosed originally, or something else has changed (ACPI video stuff perhaps?). If we do end up finding a machine where the VBIOS is still causing problems I would suggest that we first try setting various bits in the VBIOS scratch registers. There are several to choose from that may instruct the VBIOS to steer clear. With the notifier gone we'll also stop looking at the panel status in ->detect(). v2: Nuke enum modeset_restore (Rodrigo) Cc: stable@vger.kernel.org Cc: Wolfgang Draxinger <wdraxinger.maillist@draxit.de> Cc: Vito Caputo <vcaputo@pengaru.com> Cc: kitsunyan <kitsunyan@airmail.cc> Cc: Joonas Saarinen <jza@saunalahti.fi> Tested-by: Vito Caputo <vcaputo@pengaru.com> # Thinkapd X61s Tested-by: kitsunyan <kitsunyan@airmail.cc> # ThinkPad X200 Tested-by: Joonas Saarinen <jza@saunalahti.fi> # Fujitsu Siemens U9210 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105902 References: https://lists.freedesktop.org/archives/intel-gfx/2018-June/169315.html References: https://bugs.freedesktop.org/show_bug.cgi?id=21230 Fixes: e2c8b870 ("drm/i915: Use atomic helpers for suspend, v2.") Signed-off-by:
-
Chris Wilson authored
There's a race between idling the engine and finishing off the last tasklet (as we may kick the tasklets after declaring an individual engine idle). However, since we do not need to access the device until we try to submit to the ELSP register (processing the CSB just requires normal CPU access to the HWSP, and when idle we should not need to submit!) we can defer the assertion unto that point. The assertion is still useful as it does verify that we do hold the longterm GT wakeref taken from request allocation until request completion. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107274 Fixes: 9512f985 ("drm/i915/execlists: Direct submission of new requests (avoid tasklet/ksoftirqd)") Signed-off-by:
-
Chris Wilson authored
If we call into the shrinker for direct relcaim inside kmalloc, it will retire the requests. If we retire the vma->last_active while processing a new i915_vma_move_to_active() we can upset the delicate bookkeeping required for the cache. After the possible invocation of the shrinker, we need to double check the vma->last_active is still valid. Fixes: 8b293eb5 ("drm/i915: Track the last-active inside the i915_vma") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105600#c39Signed-off-by:
-
Chris Wilson authored
We make a decision at module load whether to use the GuC backend or not, but lose that setup across set-wedge. Currently, the guc doesn't override the engine->set_default_submission hook letting execlists sneak back in temporarily on unwedging leading to an unbalanced park/unpark. v2: Remove comment about switching back temporarily to execlists on guc_submission_disable(). We currently only call disable on shutdown, and plan to also call disable before suspend and reset, in which case we will either restore guc submission or mark the driver as wedged, making the reset back to execlists pointless. v3: Move reset.prepare across Fixes: 63572937 ("drm/i915/execlists: Flush pending preemption events during reset") Testcase: igt/drv_module_reload/basic-reload-inject Testcase: igt/gem_eio Signed-off-by:
-
Anusha Srivatsa authored
RC model has these parameters that correspond with each of 15 ranges of RC buffer threshold value in the RC model. The three elements are range_min_qp, range_max_qp and range_bpg_offset. Add the Rate Control range values for eDP/MIPI and DP case. The actual values are calculated usung a helper function. This patch adds the shifts to registers where the value will be written during atomic commit. v2: - Use _MMIO_PIPE() instead of _MMIO(_PICK()) (Manasi) - Combine shifts (Manasi) Cc: Jose Souza <jose.souza@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Add register defines and shifts that control the RC buffer threshold between encoder and decoder for eDP/MIPI and DP cases. The actual values are calculated usung a helper function. This patch adds the shifts to registers where the value will be written during atomic commit. v2: - Use _MMIO_PIPE() instead of _MMIO_(_PICK()) (Manasi) - Combine shifts (Manasi) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Display Stream Compression(DSC) has a set of Picture Parameter Set(PPS) components that the encoder must communicate to the decoder. This patch adds register definitions to the PPS parameters for eDP/MIPI case and Display Port. v2: - Use _MMIO_PIPE instead of _MMIO(_PICK()). (Manasi) - Use DSC constants as arguments. (Manasi) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
The Picture Parameter Set metadata for DSC has to be sent to the panel through secondary data packets. Add the error correction registers, data registers and control registers for the same. The control registers for transcoders A and B are already defined and will be reused for Icelake purpose. This patch adds Control register for EDP and transcoder C apart from adding the PPS data and error registers. v2: reuse MMIO_TRANS2 for _PPS_DATA and _PPS_ECC. The _MMIO_TRANS2(pipe, reg) macro definition takes care of the eDp case Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
- 18 Jul, 2018 2 commits
-
-
Rodrigo Vivi authored
It was originally introduced following the VESA spec in order to validate PSR. However we found so many issues around sink_crc that instead of helping PSR development it only brought another layer of trouble to the table. So, sink_crc has been a black whole for us in question of time, effort and hope. First of the problems is that HW statement is clear: "Do not attempt to use aux communication with PSR enabled". So the main reason behind sink_crc is already compromised. For a while we had hope on the aux-mutex could workaround this problem on SKL+ platforms, but that mutex was not reliable, not tested, and we shouldn't use according to HW engineers. Also, nor source, nor sink designed and implemented the sink_crc to be used like we are trying to use here. Well, the sink side of things is also apparently not prepared for this case. Each panel that we tried seemed to have a different behavior with same code and same source. So, for all the time we lost on trying to ducktape all these different issues I believe it is now time to move PSR to a more reliable validation. Maybe not a perfect one as we dreamed for this sink_crc, but at least more reliable. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Chris Wilson authored
If the driver is wedged, we skip idling the GPU. However, we may still have a few requests still not retired following the wedging (since they will be waiting for a background worker trying to acquire struct_mutex). As we hold the struct_mutex, always do a quick request retirement in order to flush the wedged path. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107257Signed-off-by:
-
- 17 Jul, 2018 2 commits
-
-
Chris Wilson authored
Our I915g (early gen3, the oldest machine we have in the farm) is still reporting occasional incoherency performing the following operations: 1) write through GGTT (indirect write into memory) 2) write through either CPU or WC (direct write into memory) 3) read from GGTT (indirect read) Instead of reporting the value from (2), the read from GGTT reports the earlier value written via the GGTT. We have made sure that the writes are flushed from the CPU (commit 3a32497f ("drm/i915/selftests: Provide full mb() around clflush") and commit add00e6d ("drm/i915: Flush the WCB following a WC write")), but still see the error, just less frequently. The only remaining cache that might be affected here is a chipset cache, so flush that as well. Testcase: igt/drv_selftest/live_coherency #gdg Signed-off-by:
-
Chris Wilson authored
In the huge pages tests, we may have lots of objects being trapped on the freelist as we hold the struct_mutex allowing the free worker no opportunity to recover the backing store. We also have stricter requirements and the desire for large contiguous pages, further increasing the allocation pressure. To reduce the chance of running out of memory, we could either drop the mutex and flush the free worker, or we could release the backing store directly. We do the latter in this patch for simplicity. References: https://bugs.freedesktop.org/show_bug.cgi?id=107254Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180717082334.18774-1-chris@chris-wilson.co.uk
-
- 16 Jul, 2018 6 commits
-
-
Chris Wilson authored
We must be able to reset the GPU while we are waiting on it to perform an eviction (unbinding an active vma). So attach a spinning request to a target vma and try and it evict it from a thread to see if that blocks indefinitely. v2: Add a wait for the thread to start just in case that takes more than 10ms... v3: complete() not completion_done() to signal the completion. Signed-off-by:
-
Chris Wilson authored
Inject a failure into preemption completion to pretend as if the HW didn't successfully handle preemption and we are forced to do a reset in the middle. v2: Wait for preemption, to force testing with the missed preemption. Signed-off-by:
-
Chris Wilson authored
On reset/wedging, we cancel all pending replies from the HW and we also want to cancel an outstanding preemption event. Since we use the same function to cancel the pending replies for reset and for a preemption event, we can simply clear the active tracking for all. v2: Keep execlists_user_end() markup for wedging v3: Move assignment to inline to hide the bare assignment. Fixes: 60a94324 ("drm/i915/execlists: Drop clear_gtiir() on GPU reset") Signed-off-by:
-
Chris Wilson authored
If we declare the driver wedged before the GPU truly is, then we may see the GPU complete some CS events following our cancellation. This leaves us quite confused as we deleted all the bookkeeping and thus complain about the inconsistent state. We can just ignore the remaining events and let the GPU idle by not feeding it, and so avoid trying to racily overwrite shared state. We rely on there being a full GPU reset before unwedging, giving us the opportunity to reset the shared state. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107188Signed-off-by:
-
Chris Wilson authored
On an aborted module load, we unwind and free our device private - but we left a dangling pointer to our privates inside the pci_device. After the attempted aborted unload, we may still get a call to i915_pci_remove() when the module is removed, potentially chasing stale data. Signed-off-by:
-
Chris Wilson authored
Give in, since CI continues to incorrectly insist that KERN_NOTICE is a warning and flags the timeout message as unwanted spam. At first, the intention was to use the message to indicate which tests might warrant an extended run, but virtually all tests require a timeout so it is simply not as interesting as first thought. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103667Signed-off-by:
-
- 14 Jul, 2018 1 commit
-
-
Michał Winiarski authored
We're seeing "RPM wakelock ref not held during HW access" warning otherwise. Since IRQs are synced for runtime suspend we can just disable the wakeref asserts. Reported-by:
Marta Löfstedt <marta.lofstedt@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105710Signed-off-by:
-
- 13 Jul, 2018 9 commits
-
-
Chris Wilson authored
With the new CSB processing code, we are not vulnerable to delayed delivery of a pre-reset interrupt as we use the CSB status pointers in the HWSP to decide if we need to parse any CSB events and no longer need to wait for the first post-reset interrupt to be assured that the CSB mmio registers are valid. The new icl code to clear registers has a nasty lock inversion: [ 57.409776] ====================================================== [ 57.409779] WARNING: possible circular locking dependency detected [ 57.409783] 4.18.0-rc4-CI-CI_DII_1137+ #1 Tainted: G U W [ 57.409785] ------------------------------------------------------ [ 57.409788] swapper/6/0 is trying to acquire lock: [ 57.409790] 000000004f304ee5 (&engine->timeline.lock/1){-.-.}, at: execlists_submit_request+0x2b/0x1a0 [i915] [ 57.409841] but task is already holding lock: [ 57.409844] 00000000aad89594 (&(&rq->lock)->rlock#2){-.-.}, at: notify_ring+0x2b2/0x480 [i915] [ 57.409869] which lock already depends on the new lock. [ 57.409872] the existing dependency chain (in reverse order) is: [ 57.409876] -> #2 (&(&rq->lock)->rlock#2){-.-.}: [ 57.409900] notify_ring+0x2b2/0x480 [i915] [ 57.409922] gen8_cs_irq_handler+0x39/0xa0 [i915] [ 57.409943] gen11_irq_handler+0x2f0/0x420 [i915] [ 57.409949] __handle_irq_event_percpu+0x42/0x370 [ 57.409952] handle_irq_event_percpu+0x2b/0x70 [ 57.409956] handle_irq_event+0x2f/0x50 [ 57.409959] handle_edge_irq+0xe7/0x190 [ 57.409964] handle_irq+0x67/0x160 [ 57.409967] do_IRQ+0x5e/0x120 [ 57.409971] ret_from_intr+0x0/0x1d [ 57.409974] _raw_spin_unlock_irqrestore+0x4e/0x60 [ 57.409979] tasklet_action_common.isra.5+0x47/0xb0 [ 57.409982] __do_softirq+0xd9/0x505 [ 57.409985] irq_exit+0xa9/0xc0 [ 57.409988] do_IRQ+0x9a/0x120 [ 57.409991] ret_from_intr+0x0/0x1d [ 57.409995] cpuidle_enter_state+0xac/0x360 [ 57.409999] do_idle+0x1f3/0x250 [ 57.410004] cpu_startup_entry+0x6a/0x70 [ 57.410010] start_secondary+0x19d/0x1f0 [ 57.410015] secondary_startup_64+0xa5/0xb0 [ 57.410018] -> #1 (&(&dev_priv->irq_lock)->rlock){-.-.}: [ 57.410081] clear_gtiir+0x30/0x200 [i915] [ 57.410116] execlists_reset+0x6e/0x2b0 [i915] [ 57.410140] i915_reset_engine+0x111/0x190 [i915] [ 57.410165] i915_handle_error+0x11a/0x4a0 [i915] [ 57.410198] i915_hangcheck_elapsed+0x378/0x530 [i915] [ 57.410204] process_one_work+0x248/0x6c0 [ 57.410207] worker_thread+0x37/0x380 [ 57.410211] kthread+0x119/0x130 [ 57.410215] ret_from_fork+0x3a/0x50 [ 57.410217] -> #0 (&engine->timeline.lock/1){-.-.}: [ 57.410224] _raw_spin_lock_irqsave+0x33/0x50 [ 57.410256] execlists_submit_request+0x2b/0x1a0 [i915] [ 57.410289] submit_notify+0x8d/0x124 [i915] [ 57.410314] __i915_sw_fence_complete+0x81/0x250 [i915] [ 57.410339] dma_i915_sw_fence_wake+0xd/0x20 [i915] [ 57.410344] dma_fence_signal_locked+0x79/0x200 [ 57.410368] notify_ring+0x2ba/0x480 [i915] [ 57.410392] gen8_cs_irq_handler+0x39/0xa0 [i915] [ 57.410416] gen11_irq_handler+0x2f0/0x420 [i915] [ 57.410421] __handle_irq_event_percpu+0x42/0x370 [ 57.410425] handle_irq_event_percpu+0x2b/0x70 [ 57.410428] handle_irq_event+0x2f/0x50 [ 57.410432] handle_edge_irq+0xe7/0x190 [ 57.410436] handle_irq+0x67/0x160 [ 57.410439] do_IRQ+0x5e/0x120 [ 57.410445] ret_from_intr+0x0/0x1d [ 57.410449] cpuidle_enter_state+0xac/0x360 [ 57.410453] do_idle+0x1f3/0x250 [ 57.410456] cpu_startup_entry+0x6a/0x70 [ 57.410460] start_secondary+0x19d/0x1f0 [ 57.410464] secondary_startup_64+0xa5/0xb0 [ 57.410466] other info that might help us debug this: [ 57.410471] Chain exists of: &engine->timeline.lock/1 --> &(&dev_priv->irq_lock)->rlock --> &(&rq->lock)->rlock#2 [ 57.410481] Possible unsafe locking scenario: [ 57.410485] CPU0 CPU1 [ 57.410487] ---- ---- [ 57.410490] lock(&(&rq->lock)->rlock#2); [ 57.410494] lock(&(&dev_priv->irq_lock)->rlock); [ 57.410498] lock(&(&rq->lock)->rlock#2); [ 57.410503] lock(&engine->timeline.lock/1); [ 57.410506] *** DEADLOCK *** [ 57.410511] 4 locks held by swapper/6/0: [ 57.410514] #0: 0000000074575789 (&(&dev_priv->irq_lock)->rlock){-.-.}, at: gen11_irq_handler+0x8a/0x420 [i915] [ 57.410542] #1: 000000009b29b30e (rcu_read_lock){....}, at: notify_ring+0x1a/0x480 [i915] [ 57.410573] #2: 00000000aad89594 (&(&rq->lock)->rlock#2){-.-.}, at: notify_ring+0x2b2/0x480 [i915] [ 57.410601] #3: 000000009b29b30e (rcu_read_lock){....}, at: submit_notify+0x35/0x124 [i915] [ 57.410635] stack backtrace: [ 57.410640] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G U W 4.18.0-rc4-CI-CI_DII_1137+ #1 [ 57.410644] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP, BIOS ICLSFWR1.R00.2222.A01.1805300339 05/30/2018 [ 57.410650] Call Trace: [ 57.410652] <IRQ> [ 57.410657] dump_stack+0x67/0x9b [ 57.410662] print_circular_bug.isra.16+0x1c8/0x2b0 [ 57.410666] __lock_acquire+0x1897/0x1b50 [ 57.410671] ? lock_acquire+0xa6/0x210 [ 57.410674] lock_acquire+0xa6/0x210 [ 57.410706] ? execlists_submit_request+0x2b/0x1a0 [i915] [ 57.410711] _raw_spin_lock_irqsave+0x33/0x50 [ 57.410741] ? execlists_submit_request+0x2b/0x1a0 [i915] [ 57.410769] execlists_submit_request+0x2b/0x1a0 [i915] [ 57.410774] ? _raw_spin_unlock_irqrestore+0x39/0x60 [ 57.410804] submit_notify+0x8d/0x124 [i915] [ 57.410828] __i915_sw_fence_complete+0x81/0x250 [i915] [ 57.410854] dma_i915_sw_fence_wake+0xd/0x20 [i915] [ 57.410858] dma_fence_signal_locked+0x79/0x200 [ 57.410882] notify_ring+0x2ba/0x480 [i915] [ 57.410907] gen8_cs_irq_handler+0x39/0xa0 [i915] [ 57.410933] gen11_irq_handler+0x2f0/0x420 [i915] [ 57.410938] __handle_irq_event_percpu+0x42/0x370 [ 57.410943] handle_irq_event_percpu+0x2b/0x70 [ 57.410947] handle_irq_event+0x2f/0x50 [ 57.410951] handle_edge_irq+0xe7/0x190 [ 57.410955] handle_irq+0x67/0x160 [ 57.410958] do_IRQ+0x5e/0x120 [ 57.410962] common_interrupt+0xf/0xf [ 57.410965] </IRQ> [ 57.410969] RIP: 0010:cpuidle_enter_state+0xac/0x360 [ 57.410972] Code: 44 00 00 31 ff e8 84 93 91 ff 45 84 f6 74 12 9c 58 f6 c4 02 0f 85 31 02 00 00 31 ff e8 7d 30 98 ff e8 e8 0e 94 ff fb 4c 29 fb <48> ba cf f7 53 e3 a5 9b c4 20 48 89 d8 48 c1 fb 3f 48 f7 ea b8 ff [ 57.411015] RSP: 0018:ffffc90000133e90 EFLAGS: 00000216 ORIG_RAX: ffffffffffffffdd [ 57.411023] RAX: ffff8804ae748040 RBX: 000000000002a97d RCX: 0000000000000000 [ 57.411029] RDX: 0000000000000046 RSI: ffffffff82141263 RDI: ffffffff820f05a7 [ 57.411035] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [ 57.411041] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8229f078 [ 57.411045] R13: ffff8804ab2adfa8 R14: 0000000000000000 R15: 0000000d5de092e3 [ 57.411052] do_idle+0x1f3/0x250 [ 57.411055] cpu_startup_entry+0x6a/0x70 [ 57.411059] start_secondary+0x19d/0x1f0 [ 57.411064] secondary_startup_64+0xa5/0xb0 The easiest remedy is to remove the defunct code. Fixes: ff047a87 ("drm/i915/icl: Correctly clear lost ctx-switch interrupts across reset for Gen11") References: fd8526e5 ("drm/i915/execlists: Trust the CSB") Signed-off-by:Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180713203529.1973-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
Inside intel_engine_is_idle(), we flush the tasklet to ensure that is being run in a timely fashion (ksoftirqd has taught us to expect the worst). However, if we are in the middle of reset, the HW may not yet be ready to execute the submission tasklet and so we must respect the disable flag. Fixes: dd0cf235 ("drm/i915: Speed up idle detection by kicking the tasklets") Testcase: igt/drv_selftest/live_hangcheck Signed-off-by:
-
Chris Wilson authored
Knowing the boundary of each subtest can be instrumental in digesting the voluminous trace output and finding the critical piece of information. Signed-off-by:
-
Chris Wilson authored
Hopefully the final hack to get guc fault-injection happy before we can clean it up again, starting from a known good baseline... [ 383.017530] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 [ 383.017556] Oops: 0000 [#1] PREEMPT SMP PTI [ 383.017566] CPU: 7 PID: 4725 Comm: drv_module_relo Tainted: G U 4.18.0-rc4-CI-CI_DRM_4485+ #1 [ 383.017581] Hardware name: Micro-Star International Co., Ltd. MS-7B54/Z370M MORTAR (MS-7B54), BIOS 1.10 12/28/2017 [ 383.017664] RIP: 0010:guc_stage_desc_pool_destroy+0x17/0xe0 [i915] [ 383.017674] Code: 59 a0 c6 05 02 59 18 00 01 e8 5e 01 c3 e0 eb b1 0f 1f 00 53 48 89 fb 48 81 c7 90 02 00 00 e8 60 64 45 e1 48 8b 83 80 02 00 00 <48> 8b 80 a0 00 00 00 48 8b 90 68 02 00 00 48 83 ea 01 48 81 fa ff [ 383.017771] RSP: 0018:ffffc900004bbdd0 EFLAGS: 00010282 [ 383.017782] RAX: 0000000000000000 RBX: ffff88012ff41300 RCX: 0000000000000000 [ 383.017794] RDX: 0000000000000000 RSI: ffffc900004bbd80 RDI: 0000000000000000 [ 383.017805] RBP: ffff88012ff40000 R08: 00000000d876ee11 R09: 0000000000000000 [ 383.017817] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88012ff47770 [ 383.017828] R13: ffff88012ff40068 R14: ffff880264392ef8 R15: ffffffffa0639950 [ 383.017840] FS: 00007fb9c18c8980(0000) GS:ffff8802663c0000(0000) knlGS:0000000000000000 [ 383.017853] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 383.017864] CR2: 00000000000000a0 CR3: 00000001df6cc003 CR4: 00000000003606e0 [ 383.017875] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 383.017887] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 383.017898] Call Trace: [ 383.017962] intel_uc_fini+0x34/0xd0 [i915] [ 383.018020] i915_gem_fini+0x5c/0x100 [i915] [ 383.018093] i915_driver_unload+0xd2/0x110 [i915] [ 383.018150] i915_pci_remove+0x10/0x20 [i915] [ 383.018165] pci_device_remove+0x36/0xb0 [ 383.018179] device_release_driver_internal+0x185/0x250 [ 383.018193] driver_detach+0x35/0x70 [ 383.018205] bus_remove_driver+0x53/0xd0 [ 383.018217] pci_unregister_driver+0x25/0xa0 [ 383.018232] __se_sys_delete_module+0x162/0x210 [ 383.018245] ? do_syscall_64+0xd/0x190 [ 383.018257] do_syscall_64+0x55/0x190 [ 383.018270] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 383.018282] RIP: 0033:0x7fb9c0f7c1b7 [ 383.018290] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 [ 383.018408] RSP: 002b:00007fffa01c2aa8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 383.018425] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb9c0f7c1b7 [ 383.018440] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000560b96856d48 [ 383.018454] RBP: 0000560b96856ce0 R08: 0000560b96856d4c R09: 00007fffa01c2ae8 [ 383.018468] R10: 00007fffa01c1aa4 R11: 0000000000000206 R12: 0000560b954f7470 Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180713172658.14070-1-chris@chris-wilson.co.uk
-
Ville Syrjälä authored
We're printing out which pins got a hotplug, so why not also print out which pins detected the long pulse as opposed to a short pulse. Signed-off-by:
-
Ville Syrjälä authored
We're doing a pointless translation from hpd_pin to port simply for passing the thing to long_pulse_detect(). Let's pass the hpd_pin directly instead. This removes the assumption that the hpd_pin and port always match. The only other place where we make that assumption anymore is intel_hpd_pin_default() and that's fine as it's what determines the relationship between the two. If we ever get hardware where the hpd pins are wired in more interesting ways it should be trivial to handle from now on. This should also fix the IS_CNL_WITH_PORT_F() case as that mapped pin E back to port F and passed that to spt_port_hotplug2_long_detect() which would always return false for port F. Now that we pass in pin E directly it'll actually do the right thing. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: cf53902f ("drm/i915/cnl: Add HPD support for Port F.") Signed-off-by:
-
Ville Syrjälä authored
Use the enum hpd_pin type when talking about HPD pins, and rename the variable from a very nondescript 'i' to 'pin', a name we already use in other parts of the code. Signed-off-by:
-
Ville Syrjälä authored
Instead of looping over ports and hpd_pins, let's loop over the encoders when doing hotplug processing. And instead of depending on dev_priv->irq_port[] to tell us whether the encoder has the ->hpd_pulse() hook or not, we can just check for that directly. So we can just nuke irq_port[] entirely. Signed-off-by:
-
Ville Syrjälä authored
Rather than looping over all the ports and picking the encoder based on the port, let's just loop over all the encoders instead. Gets rid of some irq_port[] usage, which is a bit of an eye sore. Signed-off-by:
-
