- 21 Feb, 2024 4 commits
-
-
Colin Ian King authored
There is a spelling mistake in a printed message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org>
-
SeongJae Park authored
While mq_perf_tests runs with the default kselftest timeout limit, which is 45 seconds, the test takes about 60 seconds to complete on i3.metal AWS instances. Hence, the test always times out. Increase the timeout to 180 seconds. Fixes: 852c8cbf ("selftests/kselftest/runner.sh: Add 45 second timeout per test") Cc: <stable@vger.kernel.org> # 5.4.x Signed-off-by:
SeongJae Park <sj@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Naveen N Rao authored
Add a test to exercize cpu hotplug with the function tracer active to ensure that sensitive functions in idle path are excluded from being traced. This helps catch issues such as the one fixed by commit 4b3338aa ("powerpc/ftrace: Fix stack teardown in ftrace_no_trace"). Signed-off-by:
Naveen N Rao <naveen@kernel.org> Acked-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
-
Vincenzo Mezzela authored
Resolves a spelling error in the test log, preventing potential confusion. Signed-off-by:
Vincenzo Mezzela <vincenzo.mezzela@gmail.com> Acked-by:
-
- 20 Feb, 2024 11 commits
-
-
Javier Carrasco authored
The 'workload_hint_test' test generates an object with the same name, but there is no .gitignore file in the directory to add the object as stated in the selftest documentation. Add the missing .gitignore file and include 'workload_hint_test'. Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by:
-
Javier Carrasco authored
The 'power_floor' test generates an object with the same name, but there is no .gitignore file in the directory to add the object as stated in the selftest documentation. Add the missing .gitignore file and include 'power_floor'. Signed-off-by:
-
Javier Carrasco authored
The 'uevent_filtering' test generates an object with the same name, but there is no .gitignore file in the directory to add the object as stated in the selftest documentation. Add the missing .gitignore file and include 'uevent_filtering'. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Add a kselftest that verifies power supply properties from sysfs and uevent. It checks whether they are present, readable and return valid values. This initial set of properties is not comprehensive, but rather the ones that I was able to validate locally. Co-developed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by:
-
Nícolas F. R. A. Prado authored
Similar to the C counterpart, keep track of the number of test cases in the test plan and add a helper function to be called at the end of the test to print the results and exit with the corresponding exit code. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Similar to the C counterpart, add a helper function to abort the remainder of the test. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Similar to the C counterpart, add a helper function that runs a command and passes or fails the test based on the result. Signed-off-by:
-
Nícolas F. R. A. Prado authored
Similar to the C counterpart, add a helper to print a diagnostic message. Signed-off-by:
-
Laura Nao authored
Move bash helpers for outputting in KTAP format to the common selftests folder. This allows kselftests other than the dt one to source the file and make use of the helper functions. Define pass, fail and skip codes in the same file too. Signed-off-by:
Laura Nao <laura.nao@collabora.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Ali Zahraee authored
The typo in the description shows up in test logs and output. This patch submission is part of my application to the Linux Foundation mentorship program: Linux kernel Bug Fixing Spring Unpaid 2024. Signed-off-by:
Ali Zahraee <ahzahraee@gmail.com> Acked-by:
-
Kousik Sanagavarapu authored
Fix a typo in ftracetest script which is run when running the kselftests for ftrace. s/faii/fail Signed-off-by:
Kousik Sanagavarapu <five231003@gmail.com> Acked-by:
-
- 19 Feb, 2024 1 commit
-
-
Mark Brown authored
The futex_requeue_pi test program is run a number of times with different options to provide multiple test cases. Currently every time it runs it reports the result with a consistent string, meaning that automated systems parsing the TAP output from a test run have difficulty in distinguishing which test is which. The parameters used for the test are already logged as part of the test output, let's use the same format to roll them into the test name that we use with KTAP so that automated systems can follow the results of the individual cases that get run. Signed-off-by:
Mark Brown <broonie@kernel.org> Acked-by:
Davidlohr Bueso <dave@stgolabs.net> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
- 13 Feb, 2024 24 commits
-
-
Ilpo Järvinen authored
Domain id is acquired differently depending on CPU. AMD tests use id from L3 cache, whereas CPUs from other vendors base the id on topology package id. In order to support L2 CAT test, this has to be generalized. The driver side code seems to get the domain ids from cache ids so the approach used by the AMD branch seems to match the kernel-side code. It will also work with L2 domain IDs as long as the cache level is generalized. Using the topology id was always fragile due to mismatch with the kernel-side way to acquire the domain id. It got incorrect domain id, e.g., when Cluster-on-Die (CoD) is enabled for CPU (but CoD is not well suited for resctrl in the first place so it has not been a big issue if tests don't work correctly with it). Taking all the above into account, generalize acquiring the domain id by taking it from the cache id and do not hard-code the cache level. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Ilpo Järvinen authored
Kernel-side calls the instances of a resource domains. Change the resource_id naming in the selftest code to domain_id to match the kernel side better. Suggested-by:
Maciej Wieczór-Retman <maciej.wieczor-retman@intel.com> Signed-off-by:
-
Ilpo Järvinen authored
"L2"/"L3" conversion to integer is embedded into get_cache_size() which prevents reuse. Create a helper for the cache string to integer conversion to make it reusable. Signed-off-by:
-
Ilpo Järvinen authored
write_schemata() takes the test name as an argument and determines the relevant resource based on the test name. Such mapping from name to resource does not really belong to resctrlfs.c that should provide only generic, test-independent functions. Pass the resource stored in the test information structure to write_schemata() instead of the test name. The new API is also more flexible as it enables to use write_schemata() for more than one resource within a test. While touching the sprintf(), move the unnecessary %c that is always '=' directly into the format string. Signed-off-by:
-
Ilpo Järvinen authored
Each test currently has a "run test" function in per test file and another resctrl_tests.c. The functions in resctrl_tests.c are almost identical. Generalize the one in resctrl_tests.c such that it can be shared between all of the tests. It makes adding new tests easier and removes the per test if () forests. Also add comment to CPU vendor IDs that they must be defined as bits for a bitmask. Signed-off-by:
-
Ilpo Järvinen authored
resctrl_tests reads a set of parameters and passes them individually for each tests which causes variations in the call signature between the tests. Add struct input_params to hold all input parameters. It can be easily passed to every test without varying the call signature. Signed-off-by:
-
Ilpo Järvinen authored
CAT test does not reset the CPU affinity after the benchmark. This is relatively harmless as is because CAT test is the last benchmark to run, however, more tests may be added later. Store the CPU affinity the first time taskset_benchmark() is run and add taskset_restore() which the test can call to reset the CPU mask to its original value. Signed-off-by:
-
Ilpo Järvinen authored
CAT test spawns two processes into two different control groups with exclusive schemata. Both the processes alloc a buffer from memory matching their allocated LLC block size and flush the entire buffer out of caches. Since the processes are reading through the buffer only once during the measurement and initially all the buffer was flushed, the test isn't testing CAT. Rewrite the CAT test to allocate a buffer sized to half of LLC. Then perform a sequence of tests with different LLC alloc sizes starting from half of the CBM bits down to 1-bit CBM. Flush the buffer before each test and read the buffer twice. Observe the LLC misses on the second read through the buffer. As the allocated LLC block gets smaller and smaller, the LLC misses will become larger and larger giving a strong signal on CAT working properly. The new CAT test is using only a single process because it relies on measured effect against another run of itself rather than another process adding noise. The rest of the system is set to use the CBM bits not used by the CAT test to keep the test isolated. Replace count_bits() with count_contiguous_bits() to get the first bit position in order to be able to calculate masks based on it. This change has been tested with a number of systems from different generations. Suggested-by:
-
Ilpo Järvinen authored
When reading memory in order, HW prefetching optimizations will interfere with measuring how caches and memory are being accessed. This adds noise into the results. Change the fill_buf reading loop to not use an obvious in-order access using multiply by a prime and modulo. Using a prime multiplier with modulo ensures the entire buffer is eventually read. 23 is small enough that the reads are spread out but wrapping does not occur very frequently (wrapping too often can trigger L2 hits more frequently which causes noise to the test because getting the data from LLC is not required). It was discovered that not all primes work equally well and some can cause wildly unstable results (e.g., in an earlier version of this patch, the reads were done in reversed order and 59 was used as the prime resulting in unacceptably high and unstable results in MBA and MBM test on some architectures). Link: https://lore.kernel.org/linux-kselftest/TYAPR01MB6330025B5E6537F94DA49ACB8B499@TYAPR01MB6330.jpnprd01.prod.outlook.com/Signed-off-by:
-
Ilpo Järvinen authored
The fill_buf code prevents compiler optimizating the entire read loop away by writing the final value of the variable into a file. While it achieves the goal, writing into a file requires significant amount of work within the innermost test loop and also error handling. A simpler approach is to take advantage of volatile. Writing through a pointer to a volatile variable is enough to prevent compiler from optimizing the write away, and therefore compiler cannot remove the read loop either. Add a volatile 'value_sink' into resctrl_tests.c and make fill_buf to write into it. As a result, the error handling in fill_buf.c can be simplified. Signed-off-by:
-
Ilpo Järvinen authored
Perf fd (pe_fd) is opened, reset, and enabled during every test the CAT selftest runs. Also, ioctl(pe_fd, ...) calls are not error checked even if ioctl() could return an error. Open perf fd only once before the tests and only reset and enable the counter within the test loop. Add error checking to pe_fd ioctl() calls. Signed-off-by:
-
Ilpo Järvinen authored
The main CAT test function is called cat_val() and resides in cache.c which is illogical. Rename the function to cat_test() and move it into cat_test.c. Signed-off-by:
-
Ilpo Järvinen authored
Perf related variables pea_llc_miss, pe_read, and pe_fd are globals in cache.c. Convert them to locals for better scoping and make pea_llc_miss simpler by renaming it to pea. Make close(pe_fd) handling easier to understand by doing it inside cat_val(). Make also sizeof()s use safer way to determine the right struct. Signed-off-by:
-
Ilpo Järvinen authored
struct perf_event_attr initialization is spread into perf_event_initialize() and perf_event_attr_initialize() and setting ->config is hardcoded by the deepest level. perf_event_attr init belongs to perf_event_attr_initialize() so move it entirely there. Rename the other function perf_event_initialized_read_format(). Call each init function directly from the test as they will take different parameters (especially true after the perf related global variables are moved to local variables). Signed-off-by:
-
Ilpo Järvinen authored
Naming for perf event related functions, types, and variables is inconsistent. Make struct read_format and all functions related to perf events start with "perf_". Adjust variable names towards the same direction but use shorter names for variables where appropriate (pe prefix). Signed-off-by:
-
Ilpo Järvinen authored
Perf event handling has functions that are the sole caller of another perf event handling related function: - reset_enable_llc_perf() calls perf_event_open_llc_miss() - perf_event_measure() calls get_llc_perf() Remove the extra layer of calls to make the code easier to follow by moving the code into the calling function. Signed-off-by:
-
Ilpo Järvinen authored
Perf counters are __u64 but the code converts them to unsigned long before printing them out. Remove unnecessary type conversion and retain the perf originating value as __u64. Signed-off-by:
-
Ilpo Järvinen authored
show_cache_info() calculates results and provides generic cache information. This makes it hard to alter pass/fail conditions. Separate the test specific checks into CAT and CMT test files and leave only the generic information part into show_cache_info(). Signed-off-by:
-
Ilpo Järvinen authored
measure_cache_vals() does a different thing depending on the test case that called it: - For CAT, it measures LLC misses through perf. - For CMT, it measures LLC occupancy through resctrl. Split these two functionalities into own functions the CAT and CMT tests can call directly. Replace passing the struct resctrl_val_param parameter with the filename because it's more generic and all those functions need out of resctrl_val. Co-developed-by:
Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
-
Ilpo Järvinen authored
CAT test doesn't take shareable bits into account, i.e., the test might be sharing cache with some devices (e.g., graphics). Introduce get_mask_no_shareable() and use it to provision an environment for CAT test where the allocated LLC is isolated better. Excluding shareable_bits may create hole(s) into the cbm_mask, thus add a new helper count_contiguous_bits() to find the longest contiguous set of CBM bits. create_bit_mask() is needed by an upcoming CAT test rewrite so make it available in resctrl.h right away. Signed-off-by:
-
Ilpo Järvinen authored
CAT and CMT tests calculate size of the cache portion for the n-bits cache allocation on their own. Add cache_portion_size() helper that calculates size of the cache portion for the given number of bits and use it to replace the existing span calculations. This also prepares for the new CAT test that will need to determine the size of the cache portion also during results processing. Rename also 'cache_size' local variables to 'cache_total_size' to prevent misinterpretations. Signed-off-by:
-
Ilpo Järvinen authored
get_cache_size() does not modify cache_type so it could be const. Mark cache_type const so that const char * can be passed to it. This prevents warnings once many of the test parameters are marked const. Signed-off-by:
-
Ilpo Järvinen authored
Callers of get_cbm_mask() are required to pass a string into which the capacity bitmask (CBM) is read. Neither CAT nor CMT tests need the bitmask as string but just convert it into an unsigned long value. Another limitation is that the bit mask reader can only read .../cbm_mask files. Generalize the bit mask reading function into get_bit_mask() such that it can be used to handle other files besides the .../cbm_mask and handles the unsigned long conversion within get_bit_mask() using fscanf(). Change get_cbm_mask() to use get_bit_mask() and rename it to get_full_cbm() to better indicate what the function does. Return error from get_full_cbm() if the bitmask is zero for some reason because it makes the code more robust as the selftests naturally assume the bitmask has some bits. Also mark cache_type const while at it and remove useless comments that are related to processing of CBM bits. Co-developed-by:
-
Ilpo Järvinen authored
There are unnecessary nested calls in fill_buf.c: - run_fill_buf() calls fill_cache() - alloc_buffer() calls malloc_and_init_memory() Simplify the code flow and remove those unnecessary call levels by moving the called code inside the calling function and remove the duplicated error print. Resolve the difference in run_fill_buf() and fill_cache() parameter name into 'buf_size' which is more descriptive than 'span'. Also, while moving the allocation related code, rename 'p' into 'buf' to be consistent in naming the variables. Signed-off-by:
-
