- 08 Feb, 2015 4 commits
-
-
Adrian Hunter authored
commit c6748017 upstream. Intel SDIO has broken card detect so add a quirk to reflect that. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Chris Ball <chris@printf.net> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Adrian Hunter authored
commit aad95dc4 upstream. Add ACPI HID 80860F16 as a host controller for a SD card. Signed-off-by:
-
Mika Westerberg authored
commit 07c001c1 upstream. Newer Intel PCHs with LPSS have the same SDHCI controller than Haswell but ACPI ID is different. Add this ID to the driver list. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Chris Ball <cjb@laptop.org> Signed-off-by:
-
Mark Rutland authored
commit 44b82b77 upstream. [backport to 3.12.x: fold in missing MIDR_EL1 recording] Commit d7a49086 (arm64: cpuinfo: print info for all CPUs) attempted to clean up /proc/cpuinfo, but due to concerns regarding further changes was reverted in commit 5e39977e (Revert "arm64: cpuinfo: print info for all CPUs"). There are two major issues with the arm64 /proc/cpuinfo format currently: * The "Features" line describes (only) the 64-bit hwcaps, which is problematic for some 32-bit applications which attempt to parse it. As the same names are used for analogous ISA features (e.g. aes) despite these generally being architecturally unrelated, it is not possible to simply append the 64-bit and 32-bit hwcaps in a manner that might not be misleading to some applications. Various potential solutions have appeared in vendor kernels. Typically the format of the Features line varies depending on whether the task is 32-bit. * Information is only printed regarding a single CPU. This does not match the ARM format, and does not provide sufficient information in big.LITTLE systems where CPUs are heterogeneous. The CPU information printed is queried from the current CPU's registers, which is racy w.r.t. cross-cpu migration. This patch attempts to solve these issues. The following changes are made: * When a task with a LINUX32 personality attempts to read /proc/cpuinfo, the "Features" line contains the decoded 32-bit hwcaps, as with the arm port. Otherwise, the decoded 64-bit hwcaps are shown. This aligns with the behaviour of COMPAT_UTS_MACHINE and COMPAT_ELF_PLATFORM. In the absense of compat support, the Features line is empty. The set of hwcaps injected into a task's auxval are unaffected. * Properties are printed per-cpu, as with the ARM port. The per-cpu information is queried from pre-recorded cpu information (as used by the sanity checks). * As with the previous attempt at fixing up /proc/cpuinfo, the hardware field is removed. The only users so far are 32-bit applications tied to particular boards, so no portable applications should be affected, and this should prevent future tying to particular boards. The following differences remain: * No model_name is printed, as this cannot be queried from the hardware and cannot be provided in a stable fashion. Use of the CPU {implementor,variant,part,revision} fields is sufficient to identify a CPU and is portable across arm and arm64. * The following system-wide properties are not provided, as they are not possible to provide generally. Programs relying on these are already tied to particular (32-bit only) boards: - Hardware - Revision - Serial No software has yet been identified for which these remaining differences are problematic. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org # 3.12.x Signed-off-by:
Mark Rutland <mark.rutland@arm.com> [Mark: backport to v3.12.x] Signed-off-by:
-
- 02 Feb, 2015 4 commits
-
-
Nicholas Bellinger authored
commit 046ba642 upstream. This patch drops the arbitrary maximum I/O size limit in sbc_parse_cdb(), which currently for fabric_max_sectors is hardcoded to 8192 (4 MB for 512 byte sector devices), and for hw_max_sectors is a backend driver dependent value. This limit is problematic because Linux initiators have only recently started to honor block limits MAXIMUM TRANSFER LENGTH, and other non-Linux based initiators (eg: MSFT Fibre Channel) can also generate I/Os larger than 4 MB in size. Currently when this happens, the following message will appear on the target resulting in I/Os being returned with non recoverable status: SCSI OP 28h with too big sectors 16384 exceeds fabric_max_sectors: 8192 Instead, drop both [fabric,hw]_max_sector checks in sbc_parse_cdb(), and convert the existing hw_max_sectors into a purely informational attribute used to represent the granuality that backend driver and/or subsystem code is splitting I/Os upon. Also, update FILEIO with an explicit FD_MAX_BYTES check in fd_execute_rw() to deal with the one special iovec limitiation case. v2 changes: - Drop hw_max_sectors check in sbc_parse_cdb() Reported-by:
Lance Gropper <lance.gropper@qosserver.com> Reported-by:
Stefan Priebe <s.priebe@profihost.ag> Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Hannes Reinecke authored
commit 506787a2 upstream. tcm_loop has the I_T nexus associated with the HBA. This causes commands to become misdirected if the HBA has more than one target portal group; any command is then being sent to the first target portal group instead of the correct one. The nexus needs to be associated with the target portal group instead. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Heiko Carstens authored
commit 291fdb0b upstream. Change the type of compat_sys_msgrcv's msgtyp parameter from long to compat_long_t, since compat user space passes only a 32 bit signed value. Let the compat wrapper do proper sign extension to 64 bit of this parameter. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Mateusz Guzik authored
commit e7ca2552 upstream. Compat function takes msgtyp argument as u32 and passes it down to do_msgrcv which results in casting to long, thus the sign is lost and we get a big positive number instead. Cast the argument to signed type before passing it down. Signed-off-by:
Mateusz Guzik <mguzik@redhat.com> Reported-by:
Gabriellla Schmidt <gsc@bruker.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 30 Jan, 2015 9 commits
-
-
Hans de Goede authored
commit 841e11cc upstream. Wifi on this laptop does not work unless asus-nb-wmi.wapf=4 is specified on the kerne commandline, add a quirk for this. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1173681Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit 4ec7a45b upstream. X550VB as many others Asus laptops need wapf4 quirk to make RFKILL switch be functional. Otherwise system boots with wireless card disabled and is only possible to enable it by suspend/resume. Bug report: http://bugzilla.redhat.com/show_bug.cgi?id=1089731#c23Reported-and-tested-by:
Vratislav Podzimek <vpodzime@redhat.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit 831a444e upstream. As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the U32U needs wapf=4 too. Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by:
-
Hans de Goede authored
commit 378008df upstream. The actual x401u does not use the so named x401u quirk but the x55u quirk. All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to stop the confusion. Signed-off-by:
-
Hans de Goede authored
commit 6d6ded3b upstream. As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the X550CC needs wapf=4 too. Signed-off-by:
-
Hans de Goede authored
commit 22ba58c8 upstream. As reported here: https://bugs.launchpad.net/bugs/1277959 the X550CL needs wapf=4 too. Signed-off-by:
-
AceLan Kao authored
commit c66263a3 upstream. BIOS won't light on the wifi-led after S3, so asus-wmi driver needs to control the wifi and wifi-led status. But, it'll lead to bt status error if asus-wmi driver controls bt as well. So, for X200CA, asus-wmi driver controls wifi status only and have to set wapf to 1. Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
-
poma authored
commit 7216e102 upstream. The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational. Signed-off-by:
poma <pomidorabelisima@gmail.com> Signed-off-by:
-
Andreas Utterberg authored
commit c08db55f upstream. The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational. Signed-off-by:
Andreas Utterberg <andreas.utterberg@thundera.se> Signed-off-by:
-
- 29 Jan, 2015 23 commits
-
-
Jiri Slaby authored
-
Al Viro authored
commit ca5358ef upstream. ... by not hitting rename_retry for reasons other than rename having happened. In other words, do _not_ restart when finding that between unlocking the child and locking the parent the former got into __dentry_kill(). Skip the killed siblings instead... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Al Viro authored
commit 946e51f2 upstream. Signed-off-by:
-
Rasmus Villemoes authored
commit e87c3f80 upstream. !strncmp(buf, "force host", 9) is true if and only if buf starts with "force hos". This was obviously not what was intended. The same error exists for "force full-speed", "force high-speed" and "test packet". Using strstarts avoids the error-prone hardcoding of the prefix length. For consistency, also change the other occurences of the !strncmp idiom. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Dan Carpenter authored
commit fc625960 upstream. Both "dev->udev" and "interface->dev" are NULL. These printks are not very interesting so I just deleted them. Fixes: 03270634 ('USB: Add ADU support for Ontrak ADU devices') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
NeilBrown authored
commit 108cef3a upstream. It is critical that fetch_block() and handle_stripe_dirtying() are consistent in their analysis of what needs to be loaded. Otherwise raid5 can wait forever for a block that won't be loaded. Currently when writing to a RAID5 that is resyncing, to a location beyond the resync offset, handle_stripe_dirtying chooses a reconstruct-write cycle, but fetch_block() assumes a read-modify-write, and a lockup can happen. So treat that case just like RAID6, just as we do in handle_stripe_dirtying. RAID6 always does reconstruct-write. This bug was introduced when the behaviour of handle_stripe_dirtying was changed in 3.7, so the patch is suitable for any kernel since, though it will need careful merging for some versions. Cc: stable@vger.kernel.org (v3.7+) Fixes: a7854487Reported-by:
Henry Cai <henryplusplus@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Michal Hocko authored
commit 45f87de5 upstream. Commit 2457aec6 ("mm: non-atomically mark page accessed during page cache allocation where possible") has added a separate parameter for specifying gfp mask for radix tree allocations. Not only this is less than optimal from the API point of view because it is error prone, it is also buggy currently because grab_cache_page_write_begin is using GFP_KERNEL for radix tree and if fgp_flags doesn't contain FGP_NOFS (mostly controlled by fs by AOP_FLAG_NOFS flag) but the mapping_gfp_mask has __GFP_FS cleared then the radix tree allocation wouldn't obey the restriction and might recurse into filesystem and cause deadlocks. This is the case for most filesystems unfortunately because only ext4 and gfs2 are using AOP_FLAG_NOFS. Let's simply remove radix_gfp_mask parameter because the allocation context is same for both page cache and for the radix tree. Just make sure that the radix tree gets only the sane subset of the mask (e.g. do not pass __GFP_WRITE). Long term it is more preferable to convert remaining users of AOP_FLAG_NOFS to use mapping_gfp_mask instead and simplify this interface even further. Reported-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Sjoerd Simons authored
[Not needed in newer kernels due to refactoring fixing this issue.] With 3.14.29 (and older kernels) some of my I.mx6 Sabrelite boards were crashing with the following oops: sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode mmc0: no vqmmc regulator found mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.29 #1 task: c08a7120 ti: c089c000 task.ti: c089c000 PC is at wake_up_process+0x8/0x40 LR is at sdhci_irq+0x748/0x9c4 Full boot log can be found at: http://storage.kernelci.org/stable/v3.14.29/arm-multi_v7_defconfig/lab-collabora/boot-imx6q-sabrelite.html This happens if the sdhci interrupt status contains SDHCI_INT_CARD_INT, while the sdio irq was never setup. This patch fixes that in a minimal way by checking if the sdio irq was setup. In more recent kernels this bug went away due to refactoring done by Russel King. So an alternative (potentially better?) fix for this patch is to cherrypick the following patches from a recent kernel: 18258f72 - genirq: Provide synchronize_hardirq() bf3b5ec6 - mmc: sdio_irq: rework sdio irq handling 41005003 - mmc: sdhci: clean up interrupt handling 781e989c - mmc: sdhci: convert to new SDIO IRQ handling Signed-off-by:
Sjoerd Simons <sjoerd.simons@collabora.co.uk> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tyler Baker <tyler.baker@linaro.org> Signed-off-by:
-
Mathias Krause authored
commit 3e14dcf7 upstream. Commit 5d26a105 ("crypto: prefix module autoloading with "crypto-"") changed the automatic module loading when requesting crypto algorithms to prefix all module requests with "crypto-". This requires all crypto modules to have a crypto specific module alias even if their file name would otherwise match the requested crypto algorithm. Even though commit 5d26a105 added those aliases for a vast amount of modules, it was missing a few. Add the required MODULE_ALIAS_CRYPTO annotations to those files to make them get loaded automatically, again. This fixes, e.g., requesting 'ecb(blowfish-generic)', which used to work with kernels v3.18 and below. Also change MODULE_ALIAS() lines to MODULE_ALIAS_CRYPTO(). The former won't work for crypto modules any more. Fixes: 5d26a105 ("crypto: prefix module autoloading with "crypto-"") Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Kees Cook authored
commit 4943ba16 upstream. This adds the module loading prefix "crypto-" to the template lookup as well. For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly includes the "crypto-" prefix at every level, correctly rejecting "vfat": net-pf-38 algif-hash crypto-vfat(blowfish) crypto-vfat(blowfish)-all crypto-vfat Reported-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
Kees Cook authored
commit 5d26a105 upstream. This prefixes all crypto module loading with "crypto-" so we never run the risk of exposing module auto-loading to userspace via a crypto API, as demonstrated by Mathias Krause: https://lkml.org/lkml/2013/3/4/70Signed-off-by:
-
Lars Ellenberg authored
commit 3b9d35d7 upstream. This was not noticed for many years. Affects operation if md raid is used a backing device for DRBD. CC: stable@kernel.org # v3.2+ Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Dan Carpenter authored
commit 3b05ac38 upstream. The app_tcp_pkt_out() function expects "*diff" to be set and ends up using uninitialized data if CONFIG_IP_VS_IPV6 is turned on. The same issue is there in app_tcp_pkt_in(). Thanks to Julian Anastasov for noticing that. Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Sasha Levin authored
commit a3a87844 upstream. When a key is being garbage collected, it's key->user would get put before the ->destroy() callback is called, where the key is removed from it's respective tracking structures. This leaves a key hanging in a semi-invalid state which leaves a window open for a different task to try an access key->user. An example is find_keyring_by_name() which would dereference key->user for a key that is in the process of being garbage collected (where key->user was freed but ->destroy() wasn't called yet - so it's still present in the linked list). This would cause either a panic, or corrupt memory. Fixes CVE-2014-9529. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Andy Shevchenko authored
commit 4aaa7187 upstream. DMA mapped IO should be unmapped on the error path in probe() and unconditionally on remove(). Fixes: 62936009 ([libata] Add 460EX on-chip SATA driver, sata_dwc_460ex) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit 7ddc6a21 upstream. These functions can be executed on the int3 stack, so kprobes are dangerous. Tracing is probably a bad idea, too. Fixes: b645af2d ("x86_64, traps: Rework bad_iret") Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/50e33d26adca60816f3ba968875801652507d0c4.1416870125.git.luto@amacapital.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.10: - Use __kprobes instead of NOKPROBE_SYMBOL() - Adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Bryan O'Donoghue authored
commit 38a1dfda upstream. Commit 0dbc6078 ('x86, build, pci: Fix PCI_MSI build on !SMP') introduced the dependency that X86_UP_APIC is only available when PCI_MSI is false. This effectively prevents PCI_MSI support on 32bit UP systems because it disables both APIC and IO-APIC. But APIC support is architecturally required for PCI_MSI. The intention of the patch was to enforce APIC support when PCI_MSI is enabled, but failed to do so. Remove the !PCI_MSI dependency from X86_UP_APIC and enforce X86_UP_APIC when PCI_MSI support is enabled on 32bit UP systems. [ tglx: Massaged changelog ] Fixes 0dbc6078 'x86, build, pci: Fix PCI_MSI build on !SMP' Signed-off-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: http://lkml.kernel.org/r/1421967529-9037-1-git-send-email-pure.logic@nexus-software.ieSigned-off-by:
-
Andy Lutomirski authored
commit 3669ef9f upstream. The Witcher 2 did something like this to allocate a TLS segment index: struct user_desc u_info; bzero(&u_info, sizeof(u_info)); u_info.entry_number = (uint32_t)-1; syscall(SYS_set_thread_area, &u_info); Strictly speaking, this code was never correct. It should have set read_exec_only and seg_not_present to 1 to indicate that it wanted to find a free slot without putting anything there, or it should have put something sensible in the TLS slot if it wanted to allocate a TLS entry for real. The actual effect of this code was to allocate a bogus segment that could be used to exploit espfix. The set_thread_area hardening patches changed the behavior, causing set_thread_area to return -EINVAL and crashing the game. This changes set_thread_area to interpret this as a request to find a free slot and to leave it empty, which isn't *quite* what the game expects but should be close enough to keep it working. In particular, using the code above to allocate two segments will allocate the same segment both times. According to FrostbittenKing on Github, this fixes The Witcher 2. If this somehow still causes problems, we could instead allocate a limit==0 32-bit data segment, but that seems rather ugly to me. Fixes: 41bdc785 x86/tls: Validate TLS entries to protect espfix Signed-off-by:
-
Andy Lutomirski authored
commit e30ab185 upstream. 32-bit programs don't have an lm bit in their ABI, so they can't reliably cause LDT_empty to return true without resorting to memset. They shouldn't need to do this. This should fix a longstanding, if minor, issue in all 64-bit kernels as well as a potential regression in the TLS hardening code. Fixes: 41bdc785 x86/tls: Validate TLS entries to protect espfix Signed-off-by:
-
Kees Cook authored
commit f285f4a2 upstream. On 64-bit, relocation is not required unless the load address gets changed. Without this, relocations do unexpected things when the kernel is above 4G. Reported-by:
Baoquan He <bhe@redhat.com> Signed-off-by:
Thomas D. <whissi@whissi.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Junjie Mao <eternal.n08@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20150116005146.GA4212@www.outflux.netSigned-off-by:
-
Alexandre Demers authored
commit 52045217 upstream. Many users see this message when booting without knowning that it is of no importance and that TSC calibration may have succeeded by another way. As explained by Paul Bolle in http://lkml.kernel.org/r/1348488259.1436.22.camel@x61.thuisdomein "Fast TSC calibration failed" should not be considered as an error since other calibration methods are being tried afterward. At most, those send a warning if they fail (not an error). So let's change the message from error to warning. [ tglx: Make if pr_info. It's really not important at all ] Fixes: c767a54b x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level> Signed-off-by:
Alexandre Demers <alexandre.f.demers@gmail.com> Link: http://lkml.kernel.org/r/1418106470-6906-1-git-send-email-alexandre.f.demers@gmail.comSigned-off-by:
-
K. Y. Srinivasan authored
commit 32c6590d upstream. The Hyper-V clocksource is continuous; mark it accordingly. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Acked-by: jasowang@redhat.com Cc: gregkh@linuxfoundation.org Cc: devel@linuxdriverproject.org Cc: olaf@aepfle.de Cc: apw@canonical.com Link: http://lkml.kernel.org/r/1421108762-3331-1-git-send-email-kys@microsoft.comSigned-off-by:
-
Tobias Jakobi authored
commit 8c38d28b upstream. EXYNOS4_MCT_L_MASK is defined as 0xffffff00, so applying this bitmask produces a number outside the range 0x00 to 0xff, which always results in execution of the default switch statement. Obviously this is wrong and git history shows that the bitmask inversion was incorrectly set during a refactoring of the MCT code. Fix this by putting the inversion at the correct position again. Acked-by:
Kukjin Kim <kgene.kim@samsung.com> Reported-by:
GP Orcullo <kinsamanka@gmail.com> Reviewed-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
