- 05 May, 2022 4 commits
-
-
Daniele Ceraolo Spurio authored
HuC loading via GSC is performed via a PXP command sent through the mei modules, so we need both MEI_GSC and MEI_PXP to be available. Given that the GSC will do both the transfer and the authentication, the legacy HuC loading paths can be safely skipped. Also note that the GSC-loaded HuC survives GT reset. v2: move the huc_is_authenticated() function to this patch. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220504204816.2082588-4-daniele.ceraolospurio@intel.com
-
Daniele Ceraolo Spurio authored
On newer platforms (starting DG2 G10 B-step and G11 A-step), ownership of HuC loading has been moved from the GuC to the GSC. As part of the change, the header format of the HuC binary has been updated and does not match the GuC anymore. The GSC will perform all the required checks on the binary size, so we only need to check that the version matches. Note that since we still haven't added any gsc-loaded FWs, the loaded_via_gsc variable will always be kept to its initialization value of zero. v2: Add a note about loaded_via_gsc being zero (Alan) Signed-off-by:
-
Daniele Ceraolo Spurio authored
The function name is confusing, because it doesn't check the actual auth status in HW but the SW status. Given that there is only one user (the huc_auth function itself), just get rid of it and use the FW status checker directly. Signed-off-by:
-
Matthew Brost authored
In GuC submission mode the EU priority must be updated by the GuC rather than the driver as the GuC owns the programming of the context descriptor. Given that the GuC code uses the GuC priorities, we can't use a generic function using i915 priorities for both execlists and GuC submission. The existing function has therefore been pushed to the execlists back-end while a new one has been added for GuC. v2: correctly use the GuC prio. Cc: John Harrison <john.c.harrison@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
Aravind Iddamsetty <aravind.iddamsetty@intel.com> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220504234636.2119794-1-daniele.ceraolospurio@intel.com
-
- 04 May, 2022 2 commits
-
-
Karol Herbst authored
i915_vma_reopen checked if the vma is closed before without taking the lock. So multiple threads could attempt removing the vma. Instead the lock needs to be taken before actually checking. v2: move struct declaration Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.3+ Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5732Signed-off-by:
Karol Herbst <kherbst@redhat.com> Fixes: 155ab883 ("drm/i915: Move object close under its own lock") Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Kefeng Wang authored
Use IOMEM_ERR_PTR() instead of self defined IO_ERR_PTR(). Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 03 May, 2022 5 commits
-
-
Stuart Summers authored
Additional blitter and media engines will be enabled later. Bspec: 44481, 44482 Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220502163417.2635462-2-matthew.d.roper@intel.com
-
Tvrtko Ursulin authored
Use lockdep_assert_not_held to simplify and correct the code. Otherwise false positive are hit if lock state is uknown like after a previous taint. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Remove the duplicate and incorrect (uses "" instead of <>) linux/string_helpers.h include. Fixes: cc1338f2 ("drm/i915/xehp: Update topology dumps for Xe_HP") Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Ramalingam C authored
Capture the eviction details for Flat-CCS capable, lmem objects. v2: Fix the Flat-ccs capbility of lmem obj with smem residency possibility [Thomas] v3: Fixed the suggestions [Matt] Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220502142618.2704-4-ramalingam.c@intel.com
-
Ramalingam C authored
Calculate the ccs_sz that needs to be emitted based on the src and dst pages emitted per chunk. And handle the return value of emit_pte for the ccs pages. v2: ccs_sz moved to the reduced scope [Matt] Signed-off-by:
-
- 02 May, 2022 3 commits
-
-
Chris Wilson authored
Userspace may leave predication enabled upon return from the batch buffer, which has the consequent of preventing all operation from the ring from being executed, including all the synchronisation, coherency control, arbitration and user signaling. This is more than just a local gpu hang in one client, as the user has the ability to prevent the kernel from applying critical workarounds and can cause a full GT reset. We could simply execute MI_SET_PREDICATE upon return from the user batch, but this has the repercussion of modifying the user's context state. Instead, we opt to execute a fixup batch which by mixing predicated operations can determine the state of the SET_PREDICATE_RESULT register and restore it prior to the next userspace batch. This allows us to protect the kernel's ring without changing the uABI. Suggested-by:
Zbigniew Kempczynski <zbigniew.kempczynski@intel.com> Signed-off-by:
Chris Wilson <chris.p.wilson@intel.com> Cc: Zbigniew Kempczynski <zbigniew.kempczynski@intel.com> Cc: Thomas Hellstrom <thomas.hellstrom@intel.com> Signed-off-by:
-
Chris Wilson authored
When predication is enabled all commands baring a few (such as MI_BB_END) are nop'ed. If we accidentally enable predication while poisoning the context, not only is the rest of the poisoning skipped (thus disabling the test), but the closing instructions of the poison request are nop'ed. Not only do we then not signal the waiting context, but we even prevent re-enabling arbitration and the GPU will not perform a context switch at the end of the request. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Suggested-by:
CQ Tang <cq.tang@intel.com> Signed-off-by:
-
Akeem G Abodunrin authored
When bit 19 of MI_LOAD_REGISTER_IMM instruction opcode is set on tgl+ devices, HW does not care about certain register address offsets, but instead check the following for valid address ranges on specific engines: RCS && CCS: BITS(0 - 10) BCS: BITS(0 - 11) VECS && VCS: BITS(0 - 13) Also, tgl+ now support relative addressing for BCS engine - So, this patch fixes issue with live_gt_lrc selftest that is failing where there is mismatch between LRC register layout generated during init and HW default register offsets. Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Signed-off-by:
-
- 29 Apr, 2022 4 commits
-
-
Daniele Ceraolo Spurio authored
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by:
Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by:
Jordan Justen <jordan.l.justen@intel.com> Tested-by: Jordan Justen <jordan.l.justen@intel.com> # mesa anvil & iris Link: https://patchwork.freedesktop.org/patch/msgid/20220428041926.1483683-5-matthew.d.roper@intel.com
-
Matt Roper authored
We're now ready to start exposing compute engines to userspace. v2: - Move kerneldoc for other engine classes to a separate patch. (Andi) Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Szymon Morek <szymon.morek@intel.com> UMD (mesa): https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14395Signed-off-by:
-
Matt Roper authored
Compute engines have a separate register that the driver should use to perform MMIO-based TLB invalidation. Note that the term "context" in this register's bspec description is used to refer to the engine instance (in the same way "context" is used on bspec 46167). Bspec: 43930 Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220428041926.1483683-3-matthew.d.roper@intel.com
-
Matt Roper authored
We'll be adding a new type of engine soon. Let's document the existing engine classes first to help make it clear what each type of engine is used for. Cc: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
- 28 Apr, 2022 2 commits
-
-
Umesh Nerlige Ramappa authored
Use intel_uncore_read64_2x32 to read upper and lower fields of the GPM timestamp. v2: Fix compile error Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by:
-
John Harrison authored
First release of GuC for DG2. Signed-off-by:
-
- 21 Apr, 2022 11 commits
-
-
Tomas Winkler authored
DG2 uses different GSC offsets on memory bar and uses PXP head (HECI1). v2 (Daniele): Rebased to before the ATS patches Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v1 Signed-off-by:
-
Alexander Usyskin authored
Add a hook to retrieve the firmware version of the GSC devices to bus-fixup. GSC has a different MKHI clients GUIDs but the same message structure to retrieve the firmware version as MEI so mei_fwver() can be reused. CC: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
-
Tomas Winkler authored
Implement runtime handlers for mei-gsc, to track idle state of the device properly. CC: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Alexander Usyskin authored
Setup char device in spite of firmware handshake failure. In order to provide host access to the firmware status registers and other information required for the manufacturing process. Signed-off-by:
-
Tomas Winkler authored
GSC is a graphics system controller, based on CSE, it provides a chassis controller for graphics discrete cards, as well as it supports media protection on selected devices. mei_gsc binds to a auxiliary devices exposed by Intel discrete driver i915. v2: fix error check in mei_gsc_probe v3: update MODULE_LICENSE ("GPL" is preferred over "GPL v2" and they both map to GPL version 2) Signed-off-by: -
Tomas Winkler authored
GSC is a graphics system controller, it provides a chassis controller for graphics discrete cards. There are two MEI interfaces in GSC: HECI1 and HECI2. Both interfaces are on the BAR0 at offsets 0x00258000 and 0x00259000. GSC is a GT Engine (class 4: instance 6). HECI1 interrupt is signaled via bit 15 and HECI2 via bit 14 in the interrupt register. This patch exports GSC as auxiliary device for mei driver to bind to for HECI2 interface and prepares for HECI1 interface as it will follow up soon. CC: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Vitaly Lubart <vitaly.lubart@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
In order to get the GSC Support merged on drm-intel-gt-next in a clean fashion we needed this ATS-M patch to avoid conflict in i915_pci.c: commit 412c942b ("drm/i915/ats-m: add ATS-M platform info") -- Fixing a silent conflict on drivers/gpu/drm/i915/gt/intel_gt_gmch.c: - if (!intel_vtd_active(i915)) + if (!i915_vtd_active(i915)) Signed-off-by:
-
Matthew Auld authored
The compact-pt layout restrictions should only apply to the ppGTT. Also make this play nice on platforms that only have the 64K GTT restriction, and not the compact-pt thing. Signed-off-by:
Nirmoy Das <nirmoy.das@linux.intel.com> Reviewed-by:
-
Matthew Auld authored
Trying to cast the region id into the region type doesn't work too well, since the i915_vm_min_alignment() won't give us the correct value for the stolen-lmem case. Signed-off-by:
-
Matthew Auld authored
Ensure we check that the size is compatible with the requested page_size. For tiny objects that are automatically annotated with TTM_PL_FLAG_CONTIGUOUS(since they fit within a single page), we currently end up silently overriding the min_page_size, which ends up hiding bugs elsewhere. Signed-off-by:
-
Matthew Auld authored
We can only force migrate an object if the existing object size is compatible with the new destinations min_page_size for the region. Currently we blow up with something like: [ 2857.497462] kernel BUG at drivers/gpu/drm/i915/gt/intel_migrate.c:431! [ 2857.497497] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 2857.497502] CPU: 1 PID: 8921 Comm: i915_selftest Tainted: G U W 5.18.0-rc1-drm-tip+ #27 [ 2857.497513] RIP: 0010:emit_pte.cold+0x11a/0x17e [i915] [ 2857.497646] Code: 00 48 c7 c2 f0 cd c1 a0 48 c7 c7 e9 99 bd a0 e8 d2 77 5d e0 bf 01 00 00 00 e8 08 47 5d e0 31 f6 bf 09 00 00 00 e8 3c 7b 4d e0 <0f> 0b 48 c7 c1 e0 2a c5 a0 ba 34 00 00 00 48 c7 c6 00 ce c1 a0 48 [ 2857.497654] RSP: 0018:ffffc900000f7748 EFLAGS: 00010246 [ 2857.497658] RAX: 0000000000000000 RBX: ffffc900000f77c8 RCX: 0000000000000006 [ 2857.497662] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000009 [ 2857.497665] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 2857.497668] R10: 0000000000022302 R11: ffff88846dea08f0 R12: 0000000000010000 [ 2857.497672] R13: 0000000001880000 R14: 000000000000081b R15: ffff888106b7c040 [ 2857.497675] FS: 00007f0d4c4e0600(0000) GS:ffff88845da80000(0000) knlGS:0000000000000000 [ 2857.497679] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2857.497682] CR2: 00007f113966c088 CR3: 0000000211e60003 CR4: 00000000003706e0 [ 2857.497686] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2857.497689] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2857.497692] Call Trace: [ 2857.497694] <TASK> [ 2857.497697] intel_context_migrate_copy+0x1e5/0x4f0 [i915] Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220420181613.70033-1-matthew.auld@intel.com
-
- 20 Apr, 2022 1 commit
-
-
José Roberto de Souza authored
A new DG2 workaround added to fix some corner cases hangs. v2: - implementing the second and preferred option for this workaround BSpec: 54077 BSpec: 68173 BSpec: 71488 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
-
- 19 Apr, 2022 6 commits
-
-
John Harrison authored
The above two workaronuds regarding context isolation are implemented by GuC. The KMD just needs to enable them. Signed-off-by:
-
Matthew Brost authored
There is bug in DG2 where if the CCS contexts switches out while the RCS is running it can cause memory corruption. To workaround this add an atomic to a memory address with a value 1 and semaphore wait to the same address for a value of 0. The GuC firmware is responsible for writing 0 to the memory address when it is safe for the context to switch out. Signed-off-by:
-
Vinay Belgaumkar authored
Enable GuC Wa to reset RCS/CCS before it goes into RC6. Signed-off-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by:
-
John Harrison authored
There are some workarounds for DG2 that are implemented in the GuC firmware. However, the KMD is required to enable these by setting the appropriate flag as GuC does not know what platform it is running on. Wa_16011759253 Wa_14012630569 Wa_14013746162 Signed-off-by:
-
Umesh Nerlige Ramappa authored
Initiating a reset when the command streamer is not idle or in the middle of executing an MI_FORCE_WAKE can result in a hang. Multiple command streamers can be part of a single reset domain, so resetting one would mean resetting all command streamers in that domain. To workaround this, before initiating a reset, ensure that all command streamers within that reset domain are either IDLE or are not executing a MI_FORCE_WAKE. Enable GuC PRE_PARSER WA bit so that GuC follows the WA sequence when initiating engine-resets. For gt-resets, ensure that i915 applies the WA sequence. Opens to address in future patches: - The part of the WA to wait for pending forcewakes is also applicable to execlists backend. - The WA also needs to be applied for gen11 Signed-off-by:
-
Tilak Tangudu authored
Prior to doing a reset, SW must ensure command streamer is stopped, as a workaround, to eliminate a race condition in GPM flow. Setting both the ring stop and prefetch disable bits, will cause the command streamer to halt. Signed-off-by:
Tilak Tangudu <tilak.tangudu@intel.com> Reviewed-by:
-
- 16 Apr, 2022 1 commit
-
-
Rodrigo Vivi authored
v2: * Jordan: Drop stepping/skew checking as suggested by John. Signed-off-by:
-
- 15 Apr, 2022 1 commit
-
-
Ashutosh Dixit authored
At present i915 does not fetch busyness information from GuC, resulting in incorrect busyness values in fdinfo. Because engine information is coupled with busyness in fdinfo, skip showing client engine information in fdinfo with GuC submission till fetching busyness is supported in the i915 GuC submission backend. v2 (Daniele): Make commit title and description more precise Add FIXME with brief description at code change s/intel_guc_submission_is_used/intel_uc_uses_guc_submission/ v3 (Daniele): Drop FIXME in comment Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/5564 Fixes: 055634e4 ("drm/i915: Expose client engine utilisation via fdinfo") Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by:
-
