- 03 Jan, 2019 33 commits
-
-
Maruthi Srinivas Bayyavarapu authored
The audio formatter PL IP supports DMA of two streams - mm2s and s2mm for playback and capture respectively. Apart from DMA, IP also does conversions like PCM to AES and viceversa. This patch adds DMA component driver for the IP. Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Maruthi Srinivas Bayyavarapu authored
Added documentation for audio formatter IP core DT bindings. Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
It is already merged into simple-card. simple-scu-card is no longer needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
It is already merged into simple-card. simple-scu-card is no longer needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
It is already merged into audio-graph-card. audio-graph-scu-card is no longer needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
It is already merged into audio-graph-card. audio-graph-scu-card is no longer needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
audio-graph-card is now supporting normal sound and DPCM sound. For DPCM sound, original sound card (= audio-graph-scu) had been supported 1 CPU : 1 Codec connection which uses hw_params_fixup() for convert-rate/channel. But, merged audio-graph-card is completely forgeting about it. To re-support 1 CPU : 1 Codec DPCM for hw_params_fixup(), it need to judge whether it is DPCM by checking convert-rate/channel. For this purpose, this patch adds asoc_graph_card_get_conversion() as preparation Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
We will get DAI ID from "reg" property if it has on DT, otherwise get it by counting port/endpoint. But in below case, we need to get DAI ID = 0 via port reg = <0>, but current implementation returns ID = 1, because it can't judge ID = 0 was from "non reg" or "reg = <0>". Thus, it will count port/endpoint number as "non reg" case. of_graph_parse_endpoint() implementation itself is not a problem, but because asoc_simple_card_get_dai_id() need to count port/endpoint number when "non reg" case, it need to know ID = 0 was from "non reg" or "reg = <0>". This patch fix this issue. port { reg = <0>; xxxx: endpoint@0 { }; => xxxx: endpoint@1 { }; }; Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Fix Sparse warnings with two machine drivers which weren't updated Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Detected with Coccinelle Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Detected with Coccinelle Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Detected with Coccinelle Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Detected with Coccinelle Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Detected with Coccinelle Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Detected with Coccinelle skl-messages.c:419:5-32: WARNING: Comparison to bool skl-pcm.c:1426:6-33: WARNING: Comparison to bool Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Detected with Coccinelle sound/soc/intel/skylake/skl-topology.c:3106:16-20: WARNING: casting value returned by memory allocation function to (char *) is useless. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Michał Mirosław authored
MCLK input is needed when accessing any register after enabling SYSCLK. This also fixes imbalance of clk_enable / clk_disable when transitioning between ON -> STANDBY -> ON bias levels. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Michał Mirosław authored
Save 2x unsigned int of .rodata. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Michał Mirosław authored
For platforms that use the audio-graph-card driver, the codec is not selected by SoC-platform driver. Make it available. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Alexander Shiyan authored
This patch adds DT bindings documentation for Cirrus Logic CS4341 DAC. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Alexander Shiyan authored
This patch adds Cirrus Logic CS4341. This is a very simple, playback only, stereo DAC. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Shuming Fan authored
The ADC mixer setting needs to restore to default value after calibration. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Sinan Kaya authored
After 'commit 5d32a665 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")' dependencies on CONFIG_PCI that previously were satisfied implicitly through dependencies on CONFIG_ACPI have to be specified directly. This code relies on IOSF_MBI and IOSF_MBI depends on PCI. For this reason, add a direct dependency on CONFIG_PCI to the IOSF_MBI driver. Fixes: 5d32a665 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
The problem is seen in the q6asm_dai_compr_set_params() function: ret = q6asm_map_memory_regions(dir, prtd->audio_client, prtd->phys, (prtd->pcm_size / prtd->periods), ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ prtd->periods); In this code prtd->pcm_size is the buffer_size and prtd->periods comes from params->buffer.fragments. If we allow the number of fragments to be zero then it results in a divide by zero bug. One possible fix would be to use prtd->pcm_count directly instead of using the division to re-calculate it. But I decided that it doesn't really make sense to allow zero fragments. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
We can't return directly if snd_dma_alloc_pages() fails; we first need to free prtd->audio_client and prtd. Fixes: 22930c79 ("ASoC: qdsp6: q6asm-dai: Add support to compress offload") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
The q6asm_audio_client_alloc() doesn't return NULL, it returns error pointers. Fixes: 22930c79 ("ASoC: qdsp6: q6asm-dai: Add support to compress offload") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
The q6asm_fe_dais[] array has MAX_SESSIONS (8) elements so the > comparison should be >= or we access one element beyond the end of the array. Fixes: 22930c79 ("ASoC: qdsp6: q6asm-dai: Add support to compress offload") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
We accidentally call mutex_unlock(&pcm512x->mutex); twice in a row. I re-wrote the error handling to use "goto unlock;" instead of returning directly. Hopefully, it makes the code a little simpler. Fixes: 3500f1c5 ("ASoC: pcm512x: Implement the digital_mute interface") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviwed-by: Dimitris Papavasiliou <dpapavas@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Maruthi Srinivas Bayyavarapu authored
Changed License header from C to C++ style comment block. Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Rander Wang authored
For some reason this field was set to zero when all other drivers use .dynamic = 1 for front-ends. This change was tested on Dell XPS13 and has no impact with the existing legacy driver. The SOF driver also works with this change which enables it to override the fixed topology. Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Geert Uytterhoeven authored
Fixes: 33f8db9a ("ASoC: xlnx: enable i2s driver build") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
The intent was to print the address as a hexadecimal but there is an extra "u" in the "0x%08ulx" format specification so it is displayed as decimal. Fixes: aef3b06a ("[ALSA] SH7760 ASoC support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Rohit kumar authored
Headset codec is connected over PRIMARY_MI2S interface. Call set_jack for codec associated with Primary Mi2s interface. Also, set_jack to NULL when jack is freed. Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 18 Dec, 2018 7 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Peter Ujfalusi authored
We no longer have these options used anywhere. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
Use the new options for default audio support. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
No audio support is enabled by default via ASoC, disable the code as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
Use the new options for default audio support and enable Nokia n900 audio as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
The codec selection config options for DMA365 has been changed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-