Pull arch/nios2 fixes from Ley Foon Tan:
 "There are 3 arch/nios2 fixes for 4.0 final:

   - fix cache coherency issue when debugging with gdb

   - move restart_block to struct task_struct (aligned with other
     architectures)

   - fix for missing registers defines for ptrace"

* tag 'nios2-fixes-v4.0-final' of git://git.rocketboards.org/linux-socfpga-next:
  nios2: fix cache coherency issue when debug with gdb
  nios2: add missing ptrace registers defines
  nios2: signal: Move restart_block to struct task_struct

Remove the end address checking for flushda function. We need to flush
each address line for flushda instruction, from start to end address.
This is because flushda instruction only flush the cache if tag and line
fields are matched.

Change to use ldwio instruction (bypass cache) to load the instruction
that causing trap. Our interest is the actual instruction that executed
by the processor, this should be uncached.
Note, EA address might be an userspace cached address.
Signed-off-by: Ley Foon Tan <lftan@altera.com>

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are stable-candidate fixes of some recently reported issues in
  the cpufreq core, cpuidle core, the ACPI cpuidle driver and the
  hibernate core.

  Specifics:

   - Revert a 3.17 hibernate commit that was supposed to fix an issue
     related to e820 reserved regions, but broke resume from hibernation
     on Lenovo x230 (Rafael J Wysocki).

   - Prevent the ACPI cpuidle driver from overwriting the name and
     description of the C0 state set by the core when the list of
     C-states changes (Thomas Schlichter).

   - Remove the no longer needed state_count field from struct
     cpuidle_device which prevents the list of C-states shown by the
     sysfs interface from becoming incorrect when the current number of
     them is different from the number of C-states on boot (Bartlomiej
     Zolnierkiewicz).

   - The cpufreq core updates the policy object of the only online CPU
     during system resume to make it reflect the current hardware state,
     but it always assumes that CPU to be CPU0 which need not be the
     case, so fix the code to avoid that assumption (Viresh Kumar)"

* tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions"
  cpuidle: ACPI: do not overwrite name and description of C0
  cpuidle: remove state_count field from struct cpuidle_device
  cpufreq: Schedule work for the first-online CPU on resume

* pm-sleep:
  Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions"

* pm-cpufreq:
  cpufreq: Schedule work for the first-online CPU on resume

* pm-cpuidle:
  cpuidle: ACPI: do not overwrite name and description of C0
  cpuidle: remove state_count field from struct cpuidle_device

Pull PCI fixes from Bjorn Helgaas:
 "Here are some fixes for v4.0.  I apologize for how late they are.  We
  were hoping for some better fixes, but couldn't get them polished in
  time.  These fix:

   - a Xen domU oops with PCI passthrough devices
   - a sparc T5 boot failure
   - a STM SPEAr13xx crash (use after initdata freed)
   - a cpcihp hotplug driver thinko
   - an AER thinko that printed stack junk

  Details:

  Enumeration
    - Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas)

  Resource management
    - Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas)

  AER
    - Avoid info leak in __print_tlp_header() (Rasmus Villemoes)

  PCI device hotplug
    - Add missing curly braces in cpci_configure_slot() (Dan Carpenter)

  ST Microelectronics SPEAr13xx host bridge driver
    - Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov)

* tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "sparc/PCI: Clip bridge windows to fit in upstream windows"
  PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
  PCI: cpcihp: Add missing curly braces in cpci_configure_slot()
  PCI/AER: Avoid info leak in __print_tlp_header()
  PCI: spear: Drop __initdata from spear13xx_pcie_driver

These are all register available in nios2.
Signed-off-by: Ley Foon Tan <lftan@altera.com>

Pull drm fixes from Dave Airlie:
 "Final drm fixes: one core locking imbalance regression, and a bunch of
  i915 baytrail s/r fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm: fix drm_mode_getconnector() locking imbalance regression
  drm/i915/vlv: remove wait for previous GFX clk disable request
  drm/i915/chv: Remove Wait for a previous gfx force-off
  drm/i915/vlv: save/restore the power context base reg

Pull ceph revert from Sage Weil:
 "This corrects a recent misadventure with __GFP_MEMALLOC and
  PF_MEMALLOC; it turns out it's not a good fit for RBD and we're better
  off relying on dirty page throttling"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  Revert "libceph: use memalloc flags for net IO"

Merge misc fixes from Andrew Morton:
 "Three fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: numa: disable change protection for vma(VM_HUGETLB)
  include/linux/dmapool.h: declare struct device
  mm: move zone lock to a different cache line than order-0 free page lists

Unlike most (all?) other copies from user space, kernel module loading
is almost unlimited in size.  So we do a potentially huge
"copy_from_user()" when we copy the module data from user space to the
kernel buffer, which can be a latency concern when preemption is
disabled (or voluntary).

Also, because 'copy_from_user()' clears the tail of the kernel buffer on
failures, even a *failed* copy can end up wasting a lot of time.

Normally neither of these are concerns in real life, but they do trigger
when doing stress-testing with trinity.  Running in a VM seems to add
its own overheadm causing trinity module load testing to even trigger
the watchdog.

The simple fix is to just chunk up the module loading, so that it never
tries to copy insanely big areas in one go.  That bounds the latency,
and also the amount of (unnecessarily, in this case) cleared memory for
the failure case.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The rule for 'copy_from_user()' is that it zeroes the remaining kernel
buffer even when the copy fails halfway, just to make sure that we don't
leave uninitialized kernel memory around.  Because even if we check for
errors, some kernel buffers stay around after thge copy (think page
cache).

However, the x86-64 logic for user copies uses a copy_user_generic()
function for all the cases, that set the "zerorest" flag for any fault
on the source buffer.  Which meant that it didn't just try to clear the
kernel buffer after a failure in copy_from_user(), it also tried to
clear the destination user buffer for the "copy_in_user()" case.

Not only is that pointless, it also means that the clearing code has to
worry about the tail clearing taking page faults for the user buffer
case.  Which is just stupid, since that case shouldn't happen in the
first place.

Get rid of the whole "zerorest" thing entirely, and instead just check
if the destination is in kernel space or not.  And then just use
memset() to clear the tail of the kernel buffer if necessary.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

three commits, all cc: stable, to address Baytrail
suspend/resume issues.

* tag 'drm-intel-fixes-2015-04-08' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/vlv: remove wait for previous GFX clk disable request
  drm/i915/chv: Remove Wait for a previous gfx force-off
  drm/i915/vlv: save/restore the power context base reg

This reverts commit d63e2e1f.

David Ahern reported that d63e2e1f breaks booting on an 8-socket T5
sparc system.  He also verified that the system boots with d63e2e1f
reverted.  Yinghai has some fixes, but they need a little more polishing
than we can do before v4.0.

Link: http://lkml.kernel.org/r/5514391F.2030300@oracle.com	# report
Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org # patches
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.19+

Booting a v3.18 or newer Xen domU kernel with PCI devices passed through
results in an oops (this is a 32-bit 3.13.11 dom0 with a 64-bit 4.4.0
hypervisor and 32-bit domU):

  BUG: unable to handle kernel paging request at 0030303e
  IP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a
  Call Trace:
   [<c06eda4d>] ? acpi_evaluate_object+0x31/0x1fc
   [<c06b78e1>] ? pci_get_hp_params+0x111/0x4e0
   [<c0407bc7>] ? xen_force_evtchn_callback+0x17/0x30
   [<c04085fb>] ? xen_restore_fl_direct_reloc+0x4/0x4
   [<c0699d34>] ? pci_device_add+0x24/0x450

Don't look for ACPI configuration information if ACPI has been disabled.

I don't think this is the best fix, because we can boot plain Linux (no
Xen) with "acpi=off", and we don't need this check in pci_get_hp_params().
There should be a better fix that would make Xen domU work the same way.
The domU kernel has ACPI support but it has no AML.  There should be a way
to initialize the ACPI data structures so things fail gracefully rather
than oopsing.  This is an interim fix to address the regression.

Fixes: 6cd33649 ("PCI: Add pci_configure_device() during enumeration")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=96301Reported-by: Michael D Labriola <mlabriol@gdeb.com>
Tested-by: Michael D Labriola <mlabriol@gdeb.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.18+

See https://lkml.org/lkml/2014/10/29/643 and commit f56141e3
("all arches, signal: move restart_block to struct task_struct")
Signed-off-by: Ley Foon Tan <lftan@altera.com>

Regression in commit 2caa80e7
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Feb 22 11:38:36 2015 +0100

    drm: Fix deadlock due to getconnector locking changes

If the drm_connector_find() call returns NULL, we should no longer
call drm_modeset_unlock() to avoid locking imbalance.
Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull media updates from Mauro Carvalho Chehab:
 "A series of fixup patches for version 4.0:

   - one VB2 core fixup, when stopping the stream;
   - one VB2 core fixup for dma-contig memory type;
   - driver fixes at rtl28xx, s5p (tv, jpeg, mfc, soc-camera, sh_veu,
     cx23885, gspca"

* tag 'media/v3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] rtl28xxu: return success for unimplemented FE callback
  [media] rtl2832: disable regmap register cache
  [media] vb2: Fix dma_dir setting for dma-contig mem type
  [media] media: s5p-mfc: fix broken pointer cast on 64bit arch
  [media] media: s5p-mfc: fix mmap support for 64bit arch
  [media] cx23885: fix querycap
  [media] sh_veu: v4l2_dev wasn't set
  [media] s5p-mfc: Fix NULL pointer dereference caused by not set q->lock
  [media] s5p-jpeg: exynos3250: fix erroneous reset procedure
  [media] s5p-tv: hdmi needs I2C support
  [media] s5p-jpeg: Initialize cb and cr to zero
  [media] media: fix gspca drivers build dependencies
  [media] soc-camera: Fix devm_kfree() in soc_of_bind()
  [media] media: atmel-isi: increase the burst length to improve the performance
  [media] vb2: fix 'UNBALANCED' warnings when calling vb2_thread_stop()

Currently when a process accesses a hugetlb range protected with
PROTNONE, unexpected COWs are triggered, which finally puts the hugetlb
subsystem into a broken/uncontrollable state, where for example
h->resv_huge_pages is subtracted too much and wraps around to a very
large number, and the free hugepage pool is no longer maintainable.

This patch simply stops changing protection for vma(VM_HUGETLB) to fix
the problem.  And this also allows us to avoid useless overhead of minor
faults.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Suggested-by: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dmapool uses struct device in function arguments but relies on an
implicit inclusion to declare struct device causing warnings in some
configurations:

  include/linux/dmapool.h:31:7: warning: 'struct device' declared inside parameter list

Fix this by adding a struct device declaration to the file.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Huang Ying reported the following problem due to commit 3484b2de ("mm:
rearrange zone fields into read-only, page alloc, statistics and page
reclaim lines") from the Intel performance tests

    24b7e581  3484b2de
    ----------------  --------------------------
             %stddev     %change         %stddev
                 \          |                \
        152288 \261  0%     -46.2%      81911 \261  0%  aim7.jobs-per-min
           237 \261  0%     +85.6%        440 \261  0%  aim7.time.elapsed_time
           237 \261  0%     +85.6%        440 \261  0%  aim7.time.elapsed_time.max
         25026 \261  0%     +70.7%      42712 \261  0%  aim7.time.system_time
       2186645 \261  5%     +32.0%    2885949 \261  4%  aim7.time.voluntary_context_switches
       4576561 \261  1%     +24.9%    5715773 \261  0%  aim7.time.involuntary_context_switches

The problem is specific to very large machines under stress.  It was not
reproducible with the machines I had used to justify the original patch
because large numbers of CPUs are required.  When pressure is high enough,
the cache line is bouncing between CPUs trying to acquire the lock and the
holder of the lock adjusting free lists.  The intention was that the
acquirer of the lock would automatically have the cache line holding the
free lists but according to Huang, this is not a universal win.

One possibility is to move the zone lock to its own cache line but it
increases the size of the zone.  This patch moves the lock to the other
end of the free lists where they do not contend under high pressure.  It
does mean the page allocator paths now require more cache lines but Huang
reports that it restores performance to previous levels on large machines

             %stddev     %change         %stddev
                 \          |                \
         84568 \261  1%     +94.3%     164280 \261  1%  aim7.jobs-per-min
       2881944 \261  2%     -35.1%    1870386 \261  8%  aim7.time.voluntary_context_switches
           681 \261  1%      -3.4%        658 \261  0%  aim7.time.user_time
       5538139 \261  0%     -12.1%    4867884 \261  0%  aim7.time.involuntary_context_switches
         44174 \261  1%     -46.0%      23848 \261  1%  aim7.time.system_time
           426 \261  1%     -48.4%        219 \261  1%  aim7.time.elapsed_time
           426 \261  1%     -48.4%        219 \261  1%  aim7.time.elapsed_time.max
           468 \261  1%     -43.1%        266 \261  2%  uptime.boot
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Huang Ying <ying.huang@intel.com>
Tested-by: Huang Ying <ying.huang@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 89baaa57.

Dirty page throttling should be sufficient for us in the general case
so there is no need to use __GFP_MEMALLOC - it would be needed only in
the swap-over-rbd case, which we currently don't support.  (It would
probably take approximately the commit that is being reverted to add
that support, but we would also need the "swap" option to distinguish
from the general case and make sure swap ceph_client-s aren't shared
with anything else.)  See ceph-devel threads [1] and [2] for the
details of why enabling pfmemalloc reserves for all cases is a bad
thing.

On top of potential system lockups related to drained emergency
reserves, this turned out to cause ceph lockups in case peers are on
the same host and communicating via loopback due to sk_filter()
dropping pfmemalloc skbs on the receiving side because the receiving
loopback socket is not tagged with SOCK_MEMALLOC.

[1] "SOCK_MEMALLOC vs loopback"
    http://www.spinics.net/lists/ceph-devel/msg22998.html
[2] "[PATCH] libceph: don't set memalloc flags in loopback case"
    http://www.spinics.net/lists/ceph-devel/msg23392.html

Conflicts:
	net/ceph/messenger.c [ context: tcp_nodelay option ]

Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Sage Weil <sage@redhat.com>
Cc: stable@vger.kernel.org # 3.18+, needs backporting
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Mel Gorman <mgorman@suse.de>

Looks like it was introduced in:

commit 650ad970
Author: Imre Deak <imre.deak@intel.com>
Date:   Fri Apr 18 16:35:02 2014 +0300

    drm/i915: vlv: factor out vlv_force_gfx_clock and check for pending force-of

but I'm not sure why.  It has caused problems for us in the past (see
85250ddf "drm/i915/chv: Remove Wait for a previous gfx force-off"
and 8d4eee9c "drm/i915: vlv: increase timeout when forcing on the
GFX clock") and doesn't seem to be required, so let's just drop it.

References: https://bugs.freedesktop.org/show_bug.cgi?id=89611Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Cc: stable@vger.kernel.org # c9c52e24: drm/i915/chv: Remove Wait ...
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

On CHV, PUNIT team confirmed that 'VLV_GFX_CLK_STATUS_BIT' is not a
sticky bit and it will always be set. So ignore Check for previous
Gfx force off during suspend and allow the force clk as part S0ix
Sequence
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Some BIOSes (e.g. the one on the Minnowboard) don't save/restore this
reg.  If it's unlocked, we can just restore the previous value, and if
it's locked (in case the BIOS re-programmed it for us) the write will be
ignored and we'll still have "did it move" sanity check in the PM code to
warn us if something is still amiss.

References: https://bugs.freedesktop.org/show_bug.cgi?id=89611Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Darren Hart <dvhart@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Commit 84c91b7a (PM / hibernate: avoid unsafe pages in e820 reserved
regions) is reported to make resume from hibernation on Lenovo x230
unreliable, so revert it.

We will revisit the issue the commit in question was supposed to fix
in the future.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=96111Reported-by: rhn <kebuac.rhn@porcupinefactory.org>
Cc: 3.17+ <stable@vger.kernel.org> # 3.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull networking fixes from David Miller:

 1) In TCP, don't register an FRTO for cumulatively ACK'd data that was
    previously SACK'd, from Neal Cardwell.

 2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup,
    from Cong WANG.

 3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also
    from Cong WANG.

 4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel.

 5) When we encapsulate for a tunnel device, skb->sk still points to the
    user socket.  So this leads to cases where we retraverse the
    ipv4/ipv6 output path with skb->sk being of some other address
    family (f.e. AF_PACKET).  This can cause things to crash since the
    ipv4 output path is dereferencing an AF_PACKET socket as if it were
    an ipv4 one.

    The short term fix for 'net' and -stable is to elide these socket
    checks once we've entered an encapsulation sequence by testing
    xmit_recursion.

    Longer term we have a better solution wherein we pass the tunnel's
    socket down through the output paths, but that is way too invasive
    for 'net' and -stable.

    From Hannes Frederic Sowa.

 6) l2tp_init() failure path forgets to unregister per-net ops, from
    Cong WANG.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
  net: dsa: fix filling routing table from OF description
  l2tp: unregister l2tp_net_ops on failure path
  mvneta: dont call mvneta_adjust_link() manually
  ipv6: protect skb->sk accesses from recursive dereference inside the stack
  netns: don't allocate an id for dead netns
  Revert "netns: don't clear nsid too early on removal"
  ip6mr: call del_timer_sync() in ip6mr_free_table()
  net: move fib_rules_unregister() under rtnl lock
  ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup
  tcp: fix FRTO undo on cumulative ACK of SACKed range
  xen-netfront: transmit fully GSO-sized packets

Commit 1daa4303 ("net/mlx4_core: Deprecate error message at
ConnectX-2 cards startup to debug") did the deprecation only for port 1
of the card. Need to deprecate for port 2 as well.

Fixes: 1daa4303 ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to description in 'include/net/dsa.h', in cascade switches
configurations where there are more than one interconnected devices,
'rtable' array in 'dsa_chip_data' structure is used to indicate which
port on this switch should be used to send packets to that are destined
for corresponding switch.

However, dsa_of_setup_routing_table() fills 'rtable' with port numbers
of the _target_ switch, but not current one.

This commit removes redundant devicetree parsing and adds needed port
number as a function argument. So dsa_of_setup_routing_table() now just
looks for target switch number by parsing parent of 'link' device node.

To remove possible misunderstandings with the way of determining target
switch number, a corresponding comment was added to the source code and
to the DSA device tree bindings documentation file.

This was tested on a custom board with two Marvell 88E6095 switches with
following corresponding routing tables: { -1, 10 } and { 8, -1 }.
Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull input fixes from Dmitry Torokhov:
 "Updates for the input subsystem - two more tweaks for ALPS driver to
  work out kinks after splitting the touchpad, trackstick, and potential
  external PS/2 mouse into separate input devices.

  Changes to support ALPS SS4 devices (protocol V8) will be coming in
  4.1..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: alps - document stick behavior for protocol V2
  Input: alps - report V2 Dualpoint Stick events via the right evdev node
  Input: alps - report interleaved bare PS/2 packets via dev3

Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mvneta_adjust_link() is a callback for of_phy_connect() and should
not be called directly. The result of calling it directly is as below:
Signed-off-by: David S. Miller <davem@davemloft.net>

We should not consult skb->sk for output decisions in xmit recursion
levels > 0 in the stack. Otherwise local socket settings could influence
the result of e.g. tunnel encapsulation process.

ipv6 does not conform with this in three places:

1) ip6_fragment: we do consult ipv6_npinfo for frag_size

2) sk_mc_loop in ipv6 uses skb->sk and checks if we should
   loop the packet back to the local socket

3) ip6_skb_dst_mtu could query the settings from the user socket and
   force a wrong MTU

Furthermore:
In sk_mc_loop we could potentially land in WARN_ON(1) if we use a
PF_PACKET socket ontop of an IPv6-backed vxlan device.

Reuse xmit_recursion as we are currently only interested in protecting
tunnel devices.

Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Document that protocol V2 uses standard (bare) PS/2 mouse packets for the
DualPoint stick.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-By: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

On V2 devices the DualPoint Stick reports bare packets, these should be
reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also
has the INPUT_PROP_POINTING_STICK propbit set.

Note that since there is no way to distinguish these packets from an external
PS/2 mouse (insofar as these laptops have an external PS/2 port) this means
that we will be reporting PS/2 mouse events via this evdev node too, as we've
been doing in kernel 3.19 and older.

This has been tested on a Dell Latitude D620 and a Dell Latitude E6400,
which both have a V2 touchpad + a DualPoint Stick which reports bare packets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Bare packets should be reported via the same evdev device independent on
whether they are detected on the beginning of a packet or in the middle
of a packet.

This has been tested on a Dell Latitude E6400, where the DualPoint Stick
reports bare packets, which get reported via dev3 when the touchpad is
idle, and via dev2 when the touchpad and stick are used simultaneously.

This commit fixes this inconsistency by always reporting bare packets via
dev3. Note that since the come from a DualPoint Stick they really should be
reported via dev2, this gets fixed in a later commit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull USB fixes from Greg KH:
 "Here are some small USB fixes and new device ids for 4.0-rc6.  Nothing
  major, some xhci fixes for reported problems, and some usb-serial
  device ids.

  All have been in linux-next for a while"

* tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: ftdi_sio: Use jtag quirk for SNAP Connect E10
  usb: isp1760: fix spin unlock in the error path of isp1760_udc_start
  usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers
  usb: xhci: handle Config Error Change (CEC) in xhci driver
  USB: keyspan_pda: add new device id
  USB: ftdi_sio: Added custom PID for Synapse Wireless product

Pull staging driver fixes from Greg KH:
 "Here are some staging driver fixes, well, really all just IIO driver
  fixes, for 4.0-rc6.  They fix issues that have been reported with
  these drivers.

  All of these patches have been in linux-next for a while"

* tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: Use iio_trigger_get for indio_dev->trig assignment
  iio: adc: vf610: use ADC clock within specification
  iio/adc/cc10001_adc.c: Fix !HAS_IOMEM build
  iio: core: Fix double free.
  iio:inv-mpu6050: Fix inconsistency for the scale channel
  staging: iio: dummy: Fix undefined symbol build error
  iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo
  staging: iio: hmc5843: Set iio name property in sysfs
  iio: bmc150: change sampling frequency
  iio: fix drivers that check buffer->scan_mask

Pull tty/serial fixes from Greg KH:
 "Here are 3 serial driver fixes for 4.0-rc6.  They fix some reported
  issues with the samsung and fsl_lpuart drivers.

  All have been in linux-next for a while"

* tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: fsl_lpuart: clear receive flag on FIFO flush
  tty: serial: fsl_lpuart: specify transmit FIFO size
  serial: samsung: Clear operation mode on UART shutdown

Pull input subsystem fixes from Dmitry Torokhov:
 "A fix for ALPS driver for issue introduced in the latest update and a
  tweak for yet another Lenovo box in Synaptics.

  There will be more ALPS tweaks coming.."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: define INPUT_PROP_ACCELEROMETER behavior
  Input: synaptics - fix min-max quirk value for E440
  Input: synaptics - add quirk for Thinkpad E440
  Input: ALPS - fix max coordinates for v5 and v7 protocols
  Input: add MT_TOOL_PALM