- 30 Sep, 2020 1 commit
-
-
Mauro Carvalho Chehab authored
Documentation/driver-api/media/camera-sensor.rst:123: WARNING: Inline literal start-string without end-string. There's a missing blank space over there. Signed-off-by:Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
- 27 Sep, 2020 39 commits
-
-
Neil Armstrong authored
Maxime is no more a BayLibre employee, and his e-mail address is now invalid. I'll be happy to add him back using another e-mail address if he wants to continue maintaining this driver. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Dafna Hirschfeld authored
The function 'rkisp1_stream_start' calls 'rkisp1_set_next_buf' which access the buffers, so the call should be protected by taking the cap->buf.lock. After this patch, all locks are reviewed and commented so remove the TODO item "review and comment every lock" Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
When locking, use either 'spin_lock' or 'spin_lock_irq' according to the context. There is nowhere need to use 'spin_lock_irqsave'. Outside of irq context, always use 'spin_lock_irq' to be on the safe side. Signed-off-by:
-
Dafna Hirschfeld authored
In the function 'rkisp1_params_config_parameter' the lock is taken while applying the default config. But the lock only needs to protect the buffers list and the 'is_streaming' field, so move the locking to lock only what is needed. Signed-off-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
The field stats->is_streaming is written in 'start_streaming' callback without the stats->lock protection. The isr might run together with the callback so 'spin_lock_irq' should be used. Signed-off-by:
-
Dafna Hirschfeld authored
The signal RKISP1_CIF_ISP_FRAME_IN is not used in the isr so there is no need to enable it. Signed-off-by:
-
Dafna Hirschfeld authored
The signal RKISP1_CIF_ISP_FRAME is set when the ISP completes outputting the frame to the next block in the pipeline. In order to keep buffer synchronization we assume that the RKISP1_CIF_ISP_V_START signal never arrives together with the RKISP1_CIF_ISP_FRAME signal. In case those signals arrive together then the code is not able to tell if the RKISP1_CIF_ISP_FRAME signal relates to the frame of the current v-start or the previous. This patch adds a WARN_ONCE and a debugfs var to catch it. Signed-off-by:
-
Dafna Hirschfeld authored
The isp.frame_sequence is now read only from the irq handlers that are all fired from the same interrupt, so there is not need for atomic operation. In addition, the frame seq incrementation is moved from rkisp1_isp_queue_event_sof to rkisp1_isp_isr to make the code clearer and the incorrect inline comment is removed. Signed-off-by:
-
Dafna Hirschfeld authored
The params isr is called when the ISP finishes processing a frame (RKISP1_CIF_ISP_FRAME). Configurations performed in the params isr will be applied on the next frame. Since frame_sequence is updated on the vertical sync signal, we should use frame_sequence + 1 as the vb.sequence of the params buffer to indicate to userspace on which frame these parameters are being applied. Signed-off-by:
-
Dafna Hirschfeld authored
Currently, the first buffer queued in the params node is returned immediately to userspace and a copy of it is saved in the field 'cur_params'. The copy is later used for the first configuration when the stream is initiated by one of selfpath/mainpath capture nodes. There are 3 problems with this implementation: - The first params buffer is applied and returned to userspace even if userspace never calls to streamon on the params node. - If the first params buffer is queued after the stream started on the params node then it will return to userspace but will never be used. - The frame_sequence of the first buffer is set to -1 if the main/selfpath did not start streaming. A correct implementation is to apply the first params buffer when stream is started from mainpath/selfpath and only if params is also streaming. The patch adds a new function 'rkisp1_params_apply_params_cfg' which takes a buffer from the buffers queue, apply it and returns it to userspace. The function is called from the irq handler and when main/selfpath stream starts - in the function 'rkisp1_params_config_parameter' Also remove the fields 'cur_params', 'is_first_params' which are no more needed. Signed-off-by:
kernel test robot <lkp@intel.com> Acked-by:
-
Dafna Hirschfeld authored
The cproc (color processing) configuration needs to know if an image effect is configured. The code uses the image effect in 'cur_params' which is the first params buffer queued in the stream. This is the wrong place to read the value. The value should be taken from the current params buffer. Signed-off-by:
-
Dafna Hirschfeld authored
Currently the code in the isr checks if the buffer list is not empty before referencing a buffer and then check again if the buffer is not NULL. Instead we can save one 'if' statement by returning if the buffers list is empty. Also remove non-helpful inline doc 'get one empty buffer' Signed-off-by:
-
Dafna Hirschfeld authored
The code in '.stop_streaming' callback releases and acquire the lock at each iteration when returning the buffers. Holding the lock disables interrupts so it should be minimized. To make the code cleaner and still minimize holding the lock, the buffer list is first moved to a local list and then can be iterated without the lock. Signed-off-by:
-
Luca Ceresoli authored
Documentation on how to call the subdev ops is currently in the middle of synchronous and asynchronous registration. Move it to a dedicated subsection after the registration methods. Also move the final paragraph "The advantage of using v4l2_subdev..." to the beginning of the new section as it has an introductory content. [hverkuil: correct accidental deletion of the last part of a sentence] Suggested-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Luca Ceresoli authored
The subdev registration topic is pretty lengthy, and takes more than half of the "V4L2 sub-devices" section. Help readers in finding their way through the document by dedicating a subsection to "Subdev registration". Each of the two registration methods takes many paragraphs, but since adding a subsubsection would be overkill, just emphasize them in bold. Reviewed-by:
-
Luca Ceresoli authored
Fix "Helper functions exists" -> "Helper functions exist". Signed-off-by:
-
Luca Ceresoli authored
Fix "will to" -> "will do". Reviewed-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Julia Lawall authored
sg_init_table zeroes its first argument, so the allocation of that argument doesn't have to. the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,n,flags; @@ x = - kcalloc + kmalloc_array (n,sizeof(struct scatterlist),flags) ... sg_init_table(x,n) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Pavel Machek authored
Fix memory leak in node_probe. Signed-off-by:
Pavel Machek (CIP) <pavel@denx.de> Signed-off-by:
-
Niklas Söderlund authored
Extend the list of supported formats to include all RGB layouts of RAW8. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by:
-
Niklas Söderlund authored
Extend the list of supported formats to include all RGB layouts of RAW8. Signed-off-by:
-
Joakim Zhang authored
Add linux,autosuspend-period property for gpio ir receiver. Some cpuidle systems wake from idle may take a bit long time, for such case, need disable cpuidle temporarily. Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Joakim Zhang authored
GPIO IR receive is much rely on interrupt response, uneven interrupt latency will lead to incorrect timing, so the decoder fails to decode it. The issue is particularly acute on some systems which support cpuidle, not all, dynamically disable and enable cpuidle can solve this problem to a great extent. However, there is a downside to this approach, the measurement of header on the first frame may incorrect. Test on i.MX8M serials, when enable cpuidle, interrupt latency could be about 500us. With this patch: 1. has no side effect on non-cpuidle system, even runtime pm api won't be invoked to avoid a bunch of pm busy work for devices that do not need it, including spinlocks, ktime, etc. 2. latency is still much longer for the first gpio interrupt on cpuidle system, so the first frame may not be decoded. Generally, RC would transmit multiple frames at once press, we can sacrifice the first frame. 3. add "linux,autosuspend-period" property in device tree if you also suffer this cpuidle issue. Signed-off-by:
-
Rikard Falkeborn authored
Constify a number of static structs that were not modified. In order to be able to do that, const input arguments to a couple of functions that not modify their argument. This allows the compiler to put them in read-only memory, resulting in about 6k memory being read-only, and the resulting module is 400 bytes smaller. Before: text data bss dec hex filename 15492 6873 0 22365 575d drivers/media/dvb-frontends/tda18271c2dd.ko After: text data bss dec hex filename 21021 897 0 21918 559e drivers/media/dvb-frontends/tda18271c2dd.ko Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by:
-
Qinglang Miao authored
usb_free_coherent() is safe with NULL addr and this check is not required. Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
Oliver Neukum authored
Make sure the endpoint is ISOC in and do not hard code USB_DIR_IN. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Vaibhav Gupta authored
The .suspend() and .resume() callbacks are not defined for this driver. Thus, just the unlisting of PM pointers in the struct initializer will make no change in its behavior. Still unlisting is necessary so as to get rid of .suspend and .resume pointers as they are part of the legacy framework and should not be used in the driver code explicitly. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
-
Oliver Neukum authored
If you do sanity checks, you should do them for both endpoints. Hence introduce checking for endpoint type for the output endpoint, too. Reported-by: syzbot+998261c2ae5932458f6c@syzkaller.appspotmail.com Signed-off-by:
-
Evgeny Novikov authored
If rtl2832_sdr_probe() encounters an unsupported tuner it cleans up everything and returns 0. This can result in various bad things later. The patch sets the error code on the corresponding path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Signed-off-by:
-
Nicolas Dufresne authored
As per spec, the CAPTURE resolution should be automatically set based on the OUTPUT resolution. This patch properly propagate width/height to the capture when the OUTPUT format is set and override the user provided width/height with configured OUTPUT resolution when the CAPTURE fmt is updated. This also prevents userspace from selecting a CAPTURE resolution that is too small, avoiding kernel oops. Signed-off-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by:
Ezequiel Garcia <ezequiel@collabora.com> Acked-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Tested-by:
Ondrej Jirman <megous@megous.com> Signed-off-by:
-
Dafna Hirschfeld authored
Add the files: Documentation/admin-guide/media/rkisp1.rst Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst to the Rockchip ISP driver entry in the MAINTAINERS file. Signed-off-by:
-
Dafna Hirschfeld authored
Add the file 'rkisp1.rst' that documents the rkisp1 driver. Signed-off-by:
-
Dafna Hirschfeld authored
The metadata formats V4L2_META_FMT_RK_ISP1_PARAMS, V4L2_META_FMT_RK_ISP1_STAT_3A are currently described in two files under drivers/staging/media/rkisp1/Documentation/media/uapi/v4l This patch moves the description to one file: Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst The patch also extends the description and adds the rst file to toctree. Signed-off-by:
-
Dafna Hirschfeld authored
This patch changes the device configuration to support capture of V4L2_PIX_FMT_GREY video. The 'write_format' field of the format description should be planar. Also the array 'pixm->plane_fmt' that describes the planes should be memset to 0 before filling it since the the cb, cr planes should be 0. Signed-off-by:
-
Dafna Hirschfeld authored
The capture has a mapping of the mbus code needed for each pixelformat. This can be used to simplify the link validation by comparing the mbus code in the capture with the code in the resizer. Signed-off-by:
-
Dafna Hirschfeld authored
Add support to more YUV encoded media bus formats on the resizer's source pad. The patch defines an array rkisp1_rsz_yuv_formats[] with the list of supported YUV media bus formats and their {hv}div values. The {hv}div are used in the function 'rkisp1_rsz_config' instead of the macros RKISP1_MBUS_FMT_(HV)DIV, and instead of checking the capture format. Signed-off-by: -
Dafna Hirschfeld authored
Currently the resizer outputs the same media bus format as the input. This is wrong since the resizer is also used to downscale YUV formats. This patch changes the enumeration of the supported formats. The supported formats on the sink pad should be taken from the isp entity and the supported formats on the source pad should be taken from the capture entity. Signed-off-by:
-
Dafna Hirschfeld authored
Add a function 'rkisp1_cap_enum_mbus_codes' that receive a pointer to 'v4l2_subdev_mbus_code_enum' and returns the next supported mbus format of the capture. The function assumes that pixel formats with identical 'mbus' are grouped together in the hardcoded arrays, therefore the order of the entries in the array 'rkisp1_sp_fmts' are adjusted. This function is a helper for the media bus enumeration of the source pad of the resizer entity. Signed-off-by:
-
Dafna Hirschfeld authored
The capture devices supports YUV, RGB, and Bayer formats. Adding V4L2_CAP_IO_MC capability will reflect userspace what format should be set on the resizer in order to stream each of the video formats. The patch adds a 'mbus' field to the struct 'rkisp1_capture_fmt_cfg' which maps the video format to the needed mbus format. Signed-off-by:
-
