- 08 Sep, 2010 2 commits
-
-
Changli Gao authored
When there is only one rps_cpus, skb_get_rxhash() can be eliminated. Signed-off-by:
Changli Gao <xiaosuo@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Diego Elio 'Flameeyes' Pettenò authored
This simple patch copies the current approach for SIOCINQ ioctl() from DCCP into SCTP so that the userland code working with SCTP can use a similar interface across different protocols to know how much space to allocate for a buffer. Signed-off-by:
Diego Elio Pettenò <flameeyes@gmail.com> Signed-off-by:
-
- 07 Sep, 2010 38 commits
-
-
Eric Dumazet authored
- Use napi_gro_receive() and vlan_gro_receive() - Enable GRO by default Tested on a RTL8111/8168 adapter Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Yaniv Rosner authored
Note that the date format was fixed. Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Yaniv Rosner authored
Change LED scheme for dual-media Signed-off-by:
-
Yaniv Rosner authored
Add required changes in order to support dual-media boards. Signed-off-by:
-
Yaniv Rosner authored
Group all PHY specific functions together to have an organized code Signed-off-by:
-
Yaniv Rosner authored
Make the needed changes for the new scheme especially around PHY initialization, and link detection. - The get_emac_base function was changed to enable setting different MAC access setting for each PHY based of external configuration. - As a part of the dual-media preparation, the save_spirom_version was modified to accept a PHY specific version address to be saved in the shmem. This will enable to save more than single spirom version in different locations. - The test_link function was changed also as a preparation for the dual-media upcoming changes - Duplicate initialization logic was removed from the link_setting_status and link_initialize functions Signed-off-by:
-
Yaniv Rosner authored
Move all PHY specific logic from bnx2x_main into bnx2x_link. Signed-off-by:
-
Yaniv Rosner authored
Flow control implementation is split to be done in each PHY function. Signed-off-by:
-
Yaniv Rosner authored
In previous patch, common PHY functions were split in simple way to allow easy diff. This patch comes to align code in the new functions. In addition, the non-production BCM8072 PHY was removed. Signed-off-by:
-
Yaniv Rosner authored
Move the code into PHY oriented functions, and for that a new structure is defines for each PHY which contain PHY properties and its own functions. This also enables to encapsulate all PHY specific operations into the PHY functions. During initialization, the PHYs will be probed by the "bnx2x_phy_probe" function to detect which PHYs exist on-board, and configure them accordingly. Note that the ext_phy_reset implementation was incorporated in the ext_phy_init since it is actually part of the PHY initialization procedure. Signed-off-by:
-
Yaniv Rosner authored
Start building the infrastructure for dual media by adding new component of PHY which will be used all along the function. Modify function to work with this component instead of the link_params. Signed-off-by:
-
Eric Dumazet authored
No need to test twice sk->sk_shutdown & RCV_SHUTDOWN Signed-off-by:
-
Yevgeny Petrilin authored
The values didn't match the title after removing the LRO statistics in commit fa37a958Signed-off-by:
Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by:
-
Yevgeny Petrilin authored
If failed to get skb frags using napi_get_frags(), the packet is dropped. Reported-by:
-
Joe Perches authored
Convert pr_<level>("%s" ..., (struct netdev *)->name ...) to netdev_<level>((struct netdev *), ...) Signed-off-by:Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
This patch standardizes caif message logging prefixes. Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s(): " fmt, __func__ Add missing "\n"s to some logging messages Convert pr_warning to pr_warn This changes the logging message prefix from CAIF: to caif: for all uses but caif_socket.c and chnl_net.c. Those now use their filename without extension. Signed-off-by:
-
Julia Lawall authored
The function has an unsigned return type, but returns a negative constant to indicate an error condition. The result of calling the function is always stored in a variable of type (signed) int, and thus unsigned can be dropped from the return type. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
The function has an unsigned return type, but returns a negative constant to indicate an error condition. The result of calling the function is always stored in a variable of type (signed) int, and thus unsigned can be dropped from the return type. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Signed-off-by:
-
Christian Dietrich authored
The CHELSIO_T1_1G ifdef isn't necessary at this point, because it is checked in an outer ifdef level already and has no effect here. Signed-off-by:
Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by:
-
Joe Perches authored
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert jeprintk to pr_err Remove jeprintk macro define Remove periods from end of logging messages Coalesce format strings Signed-off-by:
-
Dan Carpenter authored
This showed up in my audit because we use strcpy() to copy "ds" into a 32 character buffer inside the isdn_tty_dial() function. But it turns out that we only ever use the first 32 characters so it's OK. I have changed the declaration to make the static checkers happy. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
cs->ics.parm.setup.phone is a 32 character array. In each of these cases we're copying from a 35 character array into a 32 character array so we should use strlcpy() instead of strcpy(). Signed-off-by:
-
Jiri Slaby authored
bnad_set_rx_mode omit to unlock bna_lock on one fail path. Fix that. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Debashis Dutt <ddutt@brocade.com> Cc: Rasesh Mody <rmody@brocade.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Julia Lawall authored
In this case, a device_node structure is stored in another structure that is then freed without first decrementing the reference count of the device_node structure. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression x; identifier f; position p1,p2; @@ x@p1->f = \(of_find_node_by_path\|of_find_node_by_name\|of_find_node_by_phandle\|of_get_parent\|of_get_next_parent\|of_get_next_child\|of_find_compatible_node\|of_match_node\|of_find_node_by_type\|of_find_node_with_property\|of_find_matching_node\|of_parse_phandle\|of_node_get\)(...); ... when != of_node_put(x) kfree@p2(x) @script:python@ p1 << r.p1; p2 << r.p2; @@ cocci.print_main("call",p1) cocci.print_secs("free",p2) // </smpl> Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Eric Dumazet authored
pskb_expand_head() blindly takes references on fragments before calling skb_release_data(), potentially releasing these references. We can add a fast path, avoiding these atomic operations, if we own the last reference on skb->head. Based on a previous patch from David Signed-off-by:
-
Santiago Leon authored
Add an entry to the MAINTAINERS file for ibmveth, clean up the copyright and add all authors. Change the name of the module to reflect the product name over the last number of years. Considering all the changes we have made, bump the driver version. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by:
-
Santiago Leon authored
These files probably came across from the skeleton driver. Remove them. Signed-off-by:
-
Santiago Leon authored
We had a driver specific assert function which wasn't enabled most of the time. Convert them to BUG_ON and enable them all the time. Signed-off-by:
-
Santiago Leon authored
We had a few cases where we returned success on error. Signed-off-by:
-
Santiago Leon authored
Fix most of the kernel coding style issues in ibmveth. Signed-off-by:
-
Santiago Leon authored
IbmVethNumBufferPools -> IBMVETH_NUM_BUFF_POOLS Also change IBMVETH_MAX_MTU -> IBMVETH_MIN_MTU, it refers to the minimum size not the maximum. Signed-off-by:
-
Santiago Leon authored
Use netdev_err to standardise the error output. Signed-off-by:
-
Santiago Leon authored
Use netdev_dbg to standardise the debug output. Signed-off-by:
-
Santiago Leon authored
These functions appear before their use, so we can remove the redundant prototypes. Signed-off-by:
-
Santiago Leon authored
We were using alloc_skb which doesn't create any headroom. Change it to use netdev_alloc_skb to match most other drivers. Signed-off-by:
-
Santiago Leon authored
We export all the driver specific statistics via ethtool, so there is no need to duplicate this in procfs. Signed-off-by:
-
Santiago Leon authored
This patch enables TCP checksum offload support for IPv6 on ibmveth. This completely eliminates the generation and checking of the checksum for IPv6 packets that are completely virtual and never touch a physical network. A basic TCPIPV6_STREAM netperf run showed a ~30% throughput improvement when an MTU of 64000 was used. This featured is enabled by default, as is the case for IPv4 checksum offload. When checksum offload is enabled the driver will negotiate IPv4 and IPv6 offload with the firmware separately and enable what is available. As long as either IPv4 or IPv6 offload is supported and enabled the device will report that checksum offload is enabled. The device stats, available through ethtool, will display which checksum offload features are supported/enabled by firmware. Performance testing against a stock kernel shows no regression for IPv4 or IPv6 in terms of throughput or processor utilization with checksum disabled or enabled. Signed-off-by:
Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by:
-
Santiago Leon authored
Remove code in the device probe function where we set up the checksum offload feature and replace it with a call to an existing function that is doing the same. This is done to clean up the driver in preparation of adding IPv6 checksum offload support. Signed-off-by:
-
