Do not disable the boost converter during probe. The silicon
contains functional default tunings so the boost converter can
be left at the chip default enabled state.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504134458.283780-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

snd_dmaengine_pcm_register() can be passed a NULL pointer for the config
which means that the we have to test for pcm->config being non NULL
before accessing it. Make the code more straight forward by providing a
default config when none is passed. With this pcm->config is never NULL
and we can skip all the if (pcm->config) tests.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220502131335.2604158-1-s.hauer@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

Only the main IPC ops struct should be visible outside of IPC3 code to make
sure that the code is correctly abstracted.

Instead of keeping the ipc3-ops.h with only the high level ops struct
declaration, put the ipc3_ops to sof-priv.h and move all other ops struct
declaration into ipc3-priv.h

New IPC implementation should follow this route: the main IPC ops should be
declared in sof-priv.h and no other IPC version related header be used
for generic code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220504102831.10071-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Cleanups for the dmaengine code build on top of current fixes.

As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.

The i2c id table is moved up before the probe function, as suggested
by Wolfram Sang.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220501171009.45060-1-steve@sk2.orgSigned-off-by: Mark Brown <broonie@kernel.org>

If preparing/enabling the pclk fails, the probe function should
unprepare and disable the previously prepared and enabled mclk,
which it doesn't do. This commit rectifies this.

Fixes: c3275903 ("ASoC: rockchip: support ACODEC for rk3328")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Reviewed-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20220427172310.138638-1-frattaroli.nicolas@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

During probe, determine if the chip is in fact an ADAU1761
even though an ADAU1361 is specified, and perform additional
operations to enable the ADAU1761 to behave as an ADAU1361,
i.e. disregarding the DSP and setting up routing and PM
transparently.

This enables either chip to be mounted when an ADAU1361 is specified.
Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204281841290.5574@lnxricardw1.se.axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

It is possible to craft a topology where sof_get_control_data() would do
out of bounds access because it expects that it is only called when the
payload is bytes type.
Confusingly it also handles other types of controls, but the payload
parsing implementation is only valid for bytes.

Fix the code to count the non bytes controls and instead of storing a
pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes),
store the pointer to the data itself and add a new member to save the size
of the data.

In case of non bytes controls we store the pointer to the chanv itself,
which is just an array of values at the end.

In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check
against NULL since it is incorrect and invalid in this context.
The data is pointing to the end of cdata struct, so it should never be
null.
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/20220427185221.28928-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The driver has a custom put function for "DSP Voice Wake Up" which does
not generate event notifications on change, instead returning 0. Since we
already exit early in the case that there is no change this can be fixed
by unconditionally returning 1 at the end of the function.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220428162444.3883147-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

DAPM tracks and reports the value presented to the user from DAPM controls
separately to the register value, these may diverge during initialisation
or when an autodisable control is in use.

When writing DAPM controls we currently report that a change has occurred
if either the DAPM value or the value stored in the register has changed,
meaning that if the two are out of sync we may appear to report a spurious
event to userspace. Since we use this folded in value for nothing other
than the value reported to userspace simply drop the folding in of the
register change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220428161833.3690050-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The previous fix for event generation for custom controls compared the
value already in the register with the value being written, missing the
logic that only applies the value to the register when the control is
already enabled. Fix this, compare the value cached in the driver data
rather than the register.

This should really be an autodisable control rather than open coded.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220428113221.15326-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:

This series includes last few remaining miscellaneous patches to prepare
for the introduction of new IPC version, IPC4, in the SOF driver. The changes
include new IPC ops for topology parsing to set up the volume table, prepare
the widgets for set up and free the routes. The remaining patches introduce
new fields in the existing data structures for use in IPC4 and align the flows
for widget/route set up so that they are common for both IPC3 and IPC4.

Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:

This series introduces IPC abstraction for FW loading in the SOF driver
in preparation for supporting the new IPC version in the SOF firmware.

This patch adds mt8195 dsp document. The dsp is used for Sound Open
Firmware driver node. It includes registers,  clocks, memory regions,
and mailbox for dsp.
Signed-off-by: yc.hung <yc.hung@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220106064847.15588-1-yc.hung@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix the missing pci_release_regions() before return
from sof_pci_probe() in the error handling case.

Fixes: 4bfbbb76 ("ASOC: SOF: pci: add ipc_type override for Intel IPC4 tests")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220426132539.416676-1-yangyingliang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Execute the firmware information query on the first boot if it is
available.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-11-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The snd_sof_parse_module_memcpy() is no longer used and we have the
implementation of it in ipc3-loader.c which is a default mode to load
module(s) with IPC3 if the snd_sof_load_firmware_memcpy() is used for
loading the firmware.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-10-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The used firmware loader (snd_sof_load_firmware_memcpy) can use the generic
module loading, which is by default uses the same implementation as the
snd_sof_parse_module_memcpy.

No need to set the callback for this platform.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-9-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The used firmware loader (snd_sof_load_firmware_memcpy) can use the generic
module loading, which is by default uses the same implementation as the
snd_sof_parse_module_memcpy.

No need to set the callback for these platforms.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-8-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The used firmware loader (snd_sof_load_firmware_memcpy) can use the generic
module loading, which is by default uses the same implementation as the
snd_sof_parse_module_memcpy.

No need to set the callback for iMX.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-7-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The used firmware loader (snd_sof_load_firmware_memcpy) can use the generic
module loading, which is by default uses the same implementation as the
snd_sof_parse_module_memcpy.

No need to set the callback for this platform.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-6-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since we have the fw_loader ops implementation for IPC3, we can start
using it and remove most of the IPC dependent code from the file.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-5-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add checks for the mandatory fw_loader ops.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-4-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the IPC3 dependent implementation of validating the firmware image,
parsing the ext manifest and to load modules via memcpy.

The code introduced by this commit is the IPC dependent code from the
loader.c, which is going to be removed later.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-3-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The parsing and loading of firmware modules/components are IPC dependent
operations as the organization of the firmware depends on the IPC it is
supporting.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220425221129.124615-2-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

In order to set up a pipeline with IPC4, the total memory usage for the
pipeline needs to be calculated based on the list of connected widgets.
Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be
used to calculate the memory usage for each widget in the pipelines
associated with a PCM and prepare the widget for getting set up in the
DSP. The prepare step will be used to allocate memory for the IPC
payload, assign instance ID and update the config data for the widget
based on the runtime PCM params. Once prepared, the setup step is used
to send the IPC to create the widget in the DSP.

Add an ipc_unprepare() op to unprepare the widget i.e free the memory
allocated during prepare, free the instance ID etc. This should be
invoked after the widget is freed.

A new flag "prepared" is added to struct snd_sof_widget to track the
prepared status of widgets.

Also, IPC4 requires the platform_params and the runtime PCM params in
order to prepare a widget for set up. So modify the signature of
sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept
these as arguments.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Currently, the complete flag is used only for the snd_soc_dapm_scheduler
type widgets to indicate that the pipeline has been set up. All other
widgets do not need it. Add a comment to clarify its usage and set the
complete flag to false only for the scheduler widget in
sof_widget_free().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-11-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Do not parse these tokens if they are not defined in the IPC version
specific token list. In the case of IPC4 with HDA topologies for
example, no DAI link specific tokens need to be added in topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-10-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

sof_pcm_setup_connected_widgets() can be a static function in pcm.c. No
need to declare it in the header.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-9-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add two new fields, instance_id and module_info to struct
snd_sof_widget. instance_id for widgets will be assigned when they are
set up in the DSP and reset when the widgets are freed. module_info is
used to save information the firmware provides about each module in its
manifest.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-8-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

IPC4 requires that the widgets be unbound in the firmware before they
are freed. So add a new op in struct sof_ipc_tplg_ops that will be used
to send the IPC to the firmware to unbind widgets.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-7-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Expose the mixer_to_ipc() and ipc_to_mixer() functions for reuse in
IPC4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-6-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

IPC4 requires the platform_params be passed when invoking
sof_pcm_setup_connected_widgets(). So move the call to
snd_sof_pcm_platform_hw_params() before calling
sof_pcm_setup_connected_widgets(). This has no functional impact.

sof_pcm_setup_connected_widgets will be modified in the follow up
patches to accept the platform params as an argument.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-5-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

For IPC3, the order of setting up the widgets associated with a PCM
doesn't matter. But for IPC4, widgets must be set up from the source to
the sink in order. In order to accommodate this, change the
sof_widget_list_setup/free() functions to set up/free widgets starting
with the source widget all the way to the sink widget for all pipelines.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-4-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This is in preparation for IPC4 which requires that the route be reset
before the widget is freed. For IPC3, there is nothing more to be done
other than setting the route status. So it is OK to be moved before the
widget is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-3-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a new op set_up_volume_table for control IPC ops. Define and set
the op for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220426171743.171061-2-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a quirk for the HP Pro Tablet 408, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.

It also uses DMIC1 for the internal mic rather then the default IN3
and it uses JD2 rather then the default JD1 for jack-detect.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211485Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220427134918.527381-1-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

If preparing/enabling the pclk fails, the probe function should
unprepare and disable the previously prepared and enabled mclk,
which it doesn't do. This commit rectifies this.

Fixes: c3275903 ("ASoC: rockchip: support ACODEC for rk3328")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Reviewed-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20220427172310.138638-1-frattaroli.nicolas@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

HID made of either Wolfson/CirrusLogic PCI ID + 8960 identifier

This helps enumerate the Waveshare WM8960 WM8960 Hi-Fi Sound
Card HAT on the Up2 platform.

The scripts at https://github.com/thesofproject/acpi-scripts
can be used to add the ACPI initrd overlay.

This commit is similar to the commit:
960cdd50 ("ASoC: wm8804: Add ACPI support")
Signed-off-by: Nicola Lunghi <nick83ola@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220427212916.40145-1-nick83ola@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>:

This patch series aims to fix trivial issues found in rz-ssi driver.