- 03 May, 2017 8 commits
-
-
Nicholas Piggin authored
Power9/ISAv3 has no VRMASD field in LPCR, we shouldn't be setting reserved bits, so don't set them on Power9. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Alistair Popple authored
Commit 616badd2 ("powerpc/powernv: Use OPAL call for TCE kill on NVLink2") forced all TCE kills to go via the OPAL call for NVLink2. However the PHB3 implementation of TCE kill was still being called directly from some functions which in some circumstances caused a machine check. This patch adds an equivalent IODA2 version of the function which uses the correct invalidation method depending on PHB model and changes all external callers to use it instead. Fixes: 616badd2 ("powerpc/powernv: Use OPAL call for TCE kill on NVLink2") Cc: stable@vger.kernel.org # v4.11+ Signed-off-by:
Alistair Popple <alistair@popple.id.au> Signed-off-by:
-
Michael Ellerman authored
Currently the radix TLB code includes support for CPUs that do *not* have MMU_FTR_LOCKLESS_TLBIE. On those CPUs we are required to take a global spinlock before issuing a tlbie. Radix can only be built for 64-bit Book3s CPUs, and of those, only POWER4, 970, Cell and PA6T do not have MMU_FTR_LOCKLESS_TLBIE. Although it's possible to build a kernel with Radix support that can also boot on those CPUs, we happen to know that in reality none of those CPUs support the Radix MMU, so the code can never actually run on those CPUs. So remove the native_tlbie_lock in the Radix TLB code. Note that there is another lock of the same name in the hash code, which is unaffected by this patch. Reviewed-by:
-
Mahesh Salgaonkar authored
machine_check_early() gets called in real mode. The very first time when add_taint() is called, it prints a warning which ends up calling opal call (that uses OPAL_CALL wrapper) for writing it to console. If we get a very first machine check while we are in opal we are doomed. OPAL_CALL overwrites the PACASAVEDMSR in r13 and in this case when we are done with MCE handling the original opal call will use this new MSR on it's way back to opal_return. This usually leads to unexpected behaviour or the kernel to panic. Instead move the add_taint() call later in the virtual mode where it is safe to call. This is broken with current FW level. We got lucky so far for not getting very first MCE hit while in OPAL. But easily reproducible on Mambo. Fixes: 27ea2c42 ("powerpc: Set the correct kernel taint on machine check errors.") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Michael Ellerman authored
The entire body of unregister_cpu_online() is inside an #ifdef CONFIG_HOTPLUG_CPU block. This is ugly and means we create an empty function when hotplug is disabled for no reason. Instead move the #ifdef out of the function body and define the function to be NULL in the else case. This means we'll pass NULL to cpuhp_setup_state(), but that's fine because it accepts NULL to mean there is no teardown callback, which is exactly what we want. Signed-off-by: -
Michael Ellerman authored
This code was until recently completely undocumented and even now the comment is not very verbose. We've already had one patch sent to remove the IRQ enable/disable because it's "paradoxical and unnecessary". So document it thoroughly to save anyone else from puzzling over it. Signed-off-by: -
Michael Ellerman authored
Otherwise we might select it when its dependenices aren't enabled, leading to a build break. It's default y anyway, so will be on unless someone disables it manually. Signed-off-by: -
Andrew Donnellan authored
pnv_eeh_reset() has special handling for PEs whose primary bus is the root bus or the bus immediately underneath the root port. The cxl bi-modal card support added in b0b5e591 ("cxl: Add cxl_check_and_switch_mode() API to switch bi-modal cards") relies on this behaviour when hot-resetting the CAPI adapter following a mode switch. Document this in pnv_eeh_reset() so we don't accidentally break it. Suggested-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by:
-
- 02 May, 2017 5 commits
-
-
Russell Currey authored
Remove unnecessary tags in eeh_handle_normal_event(), and add function comments for eeh_handle_normal_event() and eeh_handle_special_event(). The only functional difference is that in the case of a PE reaching the maximum number of failures, rather than one message telling you of this and suggesting you reseat the device, there are two separate messages. Suggested-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Russell Currey <ruscur@russell.cc> Reviewed-by:
-
Russell Currey authored
eeh_handle_special_event() is called when an EEH event is detected but can't be narrowed down to a specific PE. This function looks through every PE to find one in an erroneous state, then calls the regular event handler eeh_handle_normal_event() once it knows which PE has an error. However, if eeh_handle_normal_event() found that the PE cannot possibly be recovered, it will free it, rendering the passed PE stale. This leads to a use after free in eeh_handle_special_event() as it attempts to clear the "recovering" state on the PE after eeh_handle_normal_event() returns. Thus, make sure the PE is valid when attempting to clear state in eeh_handle_special_event(). Fixes: 8a6b1bc7 ("powerpc/eeh: EEH core to handle special event") Cc: stable@vger.kernel.org # v3.11+ Reported-by:
-
Alastair D'Silva authored
In some situations, a faulty AFU slice may create an interrupt storm of slice errors, rendering the machine unusable. Since these interrupts are informational only, present the interrupt once, then mask it off to prevent it from being retriggered until the AFU is reset. Signed-off-by:
Alastair D'Silva <alastair@d-silva.org> Reviewed-by:
Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
-
Vaibhav Jain authored
Fix a boundary condition where in some cases an eeh event that results in card reset isn't passed on to a driver attached to the virtual PCI device associated with a slice. This will happen in case when a slice attached device driver returns a value other than PCI_ERS_RESULT_NEED_RESET from the eeh error_detected() callback. This would result in an early return from cxl_pci_error_detected() and other drivers attached to other AFUs on the card wont be notified. The patch fixes this by making sure that all slice attached device-drivers are notified and the return values from error_detected() callback are aggregated in a scheme where request for 'disconnect' trumps all and 'none' trumps 'need_reset'. Fixes: 9e8df8a2 ("cxl: EEH support") Cc: stable@vger.kernel.org # v4.3+ Signed-off-by:
-
Vaibhav Jain authored
During an eeh event when the cxl card is fenced and card sysfs attr perst_reloads_same_image is set following warning message is seen in the kernel logs: Adapter context unlocked with 0 active contexts ------------[ cut here ]------------ WARNING: CPU: 12 PID: 627 at ../drivers/misc/cxl/main.c:325 cxl_adapter_context_unlock+0x60/0x80 [cxl] Even though this warning is harmless, it clutters the kernel log during an eeh event. This warning is triggered as the EEH callback cxl_pci_error_detected doesn't obtain a context-lock before forcibly detaching all active context and when context-lock is released during call to cxl_configure_adapter from cxl_pci_slot_reset, a warning in cxl_adapter_context_unlock is triggered. To fix this warning, we acquire the adapter context-lock via cxl_adapter_context_lock() in the eeh callback cxl_pci_error_detected() once all the virtual AFU PHBs are notified and their contexts detached. The context-lock is released in cxl_pci_slot_reset() after the adapter is successfully reconfigured and before the we call the slot_reset callback on slice attached device-drivers. Fixes: 70b565bb ("cxl: Prevent adapter reset if an active context exists") Cc: stable@vger.kernel.org # v4.9+ Reported-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Tested-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by:
-
- 01 May, 2017 2 commits
-
-
Nicholas Piggin authored
This was a hack we added to work around the allmodconfig build breaking, see commit fb43e847 ("powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64"). Since we merged the thin archives support in commit 43c9127d ("powerpc: Add option to use thin archives") this hasn't been necessary, so remove it. Signed-off-by:
-
Michael Neuling authored
Currently if we take an oops caused by an 0x380 or 0x480 exception, we get a print which assumes SLB problems. With radix, these vectors have different meanings. This patch updates the oops message to reflect these different meanings. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
- 28 Apr, 2017 19 commits
-
-
Michael Ellerman authored
Michal Suchánek noticed a comment in book3s/64/mmu-hash.h about the context ids we use for the kernel was inconsistent with the code and other comments in the same file. It should read 1-4 not 1-5. While we're touching it, update "address" to "addresses" which makes more sense as it's referring to more than one address below. Reported-by:
Michal Suchánek <msuchanek@suse.de> Signed-off-by:
-
Alexey Kardashevskiy authored
This enables VFIO on pseries host in order to allow VFIO in nested guest under PR KVM or DPDK in a HV guest. This adds support of the VFIO_SPAPR_TCE_IOMMU type. This adds exchange() callback to allow TCE updates by the SPAPR TCE IOMMU driver in VFIO. This initializes DMA32 window parameters in iommu_table_group as as this does not implement VFIO_SPAPR_TCE_v2_IOMMU and VFIO_SPAPR_TCE_IOMMU just reuses the existing DMA32 window. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Alexey Kardashevskiy authored
When the userspace requests a small TCE table (which takes less than the system page size) and more than 1 TCE level, the existing code returns a single page size which is a bug as each additional TCE level requires at least one page and this is what pnv_pci_ioda2_table_alloc_pages() does. And we end up seeing WARN_ON(!ret && ((*ptbl)->it_allocated_size != table_size)) in drivers/vfio/vfio_iommu_spapr_tce.c. This replaces incorrect _ALIGN_UP() (which aligns zero up to zero) with max_t() to fix the bug. Besides removing WARN_ON(), there should be no other changes in behaviour. Signed-off-by:
-
Alexey Kardashevskiy authored
pnv_pci_table_alloc() ignores possible failure from kzalloc_node(), this adds a check. There are 2 callers of pnv_pci_table_alloc(), one already checks for tbl!=NULL, this adds WARN_ON() to the other path which only happens during boot time in IODA1 and not expected to fail. Signed-off-by:
-
Nicholas Piggin authored
Move a couple of existing scripts under there. Remove scripts directory: a script is a tool, a tool is not a script. Signed-off-by:
-
Nicholas Piggin authored
Currently powerpc has to introduce a dependency on its default build target zImage in order to run a relocation check pass over the linked vmlinux. This is deficient because the check is not run if the plain vmlinux target is built, or if one of the other boot targets is built. Switch to using the kbuild post-link pass, added in commit fbe6e37d ("kbuild: add arch specific post-link Makefile") in order to run this check. In future powerpc will use this to do more complicated operations, but initially using it for something simple is a good first step. Signed-off-by:
-
Nicholas Piggin authored
An externally triggered system reset (e.g., via QEMU nmi command, or pseries reset button) can cause system reset interrupts on all CPUs. In case this causes xmon to be entered, it is undesirable for the primary (first) CPU into xmon to trigger an NMI IPI to others, because this may cause a nested system reset interrupt. So spin for a time waiting for secondaries to join xmon before performing the NMI IPI, similarly to what the crash dump code does. Signed-off-by:
-
Nicholas Piggin authored
Signed-off-by:
-
Nicholas Piggin authored
Have the NMI IPI code use this op when the platform defines it. Signed-off-by:
-
Nicholas Piggin authored
Add a simple NMI IPI system that handles concurrency and reentrancy. The platform does not have to implement a true non-maskable interrupt, the default is to simply use the debugger break IPI message. This has now been co-opted for a general IPI message, and users (debugger and crash) have been reimplemented on top of the NMI system. Signed-off-by:
-
Nicholas Piggin authored
System reset is a non-maskable interrupt from Linux's point of view (occurs under local_irq_disable()), so it should use nmi_enter/exit. Signed-off-by:
-
Nicholas Piggin authored
The system reset interrupt is used for crash/debug situations, so it is desirable to have as little impact on the normal state of the system as possible. Currently it uses the current kernel stack to process the exception. This stores into the stack which may be involved with the crash. The stack pointer may be corrupted, or it may have overflowed. Avoid or minimise these problems by creating a dedicated NMI stack for the system reset interrupt to use. Signed-off-by:
-
Nicholas Piggin authored
In preparation for using a dedicated stack for system reset interrupts, prevent a nested system reset from recovering, in order to simplify code that is called in crash/debug path. This allows a system reset interrupt to just use the base stack pointer. Keep an in_nmi nesting counter similarly to the in_mce counter. Consider the interrrupt non-recoverable if it is taken inside another system reset. Interrupt nesting could be allowed similarly to MCE, but system reset is a special case that's not for normal operation, so simplicity wins until there is requirement for nested system reset interrupts. Signed-off-by:
-
Nicholas Piggin authored
The system reset interrupt can occur when MSR_EE=0, and it currently uses the PACA_EXGEN save area. Some PACA_EXGEN interrupts have a window where MSR_RI=1 and MSR_EE=0 when the save area is still in use. A system reset interrupt in this window can lead to undetected corruption when the save area gets overwritten. This patch introduces PACA_EXNMI save area for system reset exceptions, which closes this corruption window. It's also helpful to retain the EXGEN state for debugging situations, even if not considering the recoverability aspect. This patch also moves the PACA_EXMC area down to a less frequently used part of the paca with the new save area. Signed-off-by:
-
Nicholas Piggin authored
This code is common to a few exceptions, and another user will be added. This causes a trivial change to generated code: - 604: std r9,416(r1) - 608: mfspr r11,314 - 60c: std r11,368(r1) - 610: mfspr r12,315 + 604: mfspr r11,314 + 608: mfspr r12,315 + 60c: std r9,416(r1) + 610: std r11,368(r1) machine_check_powernv_early could also use this, but that requires non trivial changes to generated code, so that's for another patch. Signed-off-by:
-
Nicholas Piggin authored
Subsequent patches will add more non-RI variant exceptions, so create a macro for it rather than open-code it. This does not change generated instructions. Signed-off-by:
-
Nicholas Piggin authored
Cell will wake from low power state at the system reset interrupt, with the event encoded in SRR1, rather than waking at the interrupt vector that corresponds to that event. The system reset handler for this platform decodes SRR1 event reason and calls the interrupt handler to process it directly from the system reset handlre. A subsequent change will treat the system reset interrupt as a Linux NMI with its own per-CPU stack, and this will no longer work. Remove the external and decrementer handlers from the system reset handler. - The external exception remains raised and will fire again at the EE interrupt vector when system reset returns. - The decrementer is set to 1 so it will be raised again and fire when the system reset returns. It is possible to branch to an idle handler from the system reset interrupt (like POWER does), then restore a normal stack and restore this optimisation. But simplicity wins for now. Tested-by:
-
Nicholas Piggin authored
PA Semi will wake from low power state at the system reset interrupt, with the event encoded in SRR1, rather than waking at the interrupt vector that corresponds to that event. The system reset handler for this platform decodes SRR1 event reason and calls the interrupt handler to process it directly from the system reset handlre. A subsequent change will treat the system reset interrupt as a Linux NMI with its own per-CPU stack, and this will no longer work. Remove the external and decrementer handlers from the system reset handler. - The external exception remains raised and will fire again at the EE interrupt vector when system reset returns. - The decrementer is set to 1 so it will be raised again and fire when the system reset returns. It is possible to branch to an idle handler from the system reset interrupt (like POWER does), then restore a normal stack and restore this optimisation. But simplicity wins for now. Tested-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by:
-
Michael Ellerman authored
Merge the topic branch we were sharing with kvm-ppc, Paul has also merged it.
-
- 27 Apr, 2017 6 commits
-
-
Naveen N. Rao authored
Split ftrace_64.S further retaining the core ftrace 64-bit aspects in ftrace_64.S and moving ftrace_caller() and ftrace_graph_caller() into separate files based on -mprofile-kernel. The livepatch routines are all now contained within the mprofile file. Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Naveen N. Rao authored
entry_*.S now includes a lot more than just kernel entry/exit code. As a first step at cleaning this up, let's split out the ftrace bits into separate files. Also move all related tracing code into a new trace/ subdirectory. No functional changes. Suggested-by:
-
Christophe Leroy authored
Page table dump debugfs file is named 'kernel_page_tables' on all other architectures implementing it, while is is named 'kernel_pagetables' on powerpc. This patch renames it. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Christophe Leroy authored
Signed-off-by:
-
Christophe Leroy authored
On some targets, _PAGE_RW is 0 and this is _PAGE_RO which is used. There is also _PAGE_SHARED that is missing. Signed-off-by:
-
Christophe Leroy authored
On PPC32 (eg. mpc885_ads_defconfig), page table dump compilation fails as follows. This is because the memory layout is slightly different on PPC32. This patch adapts it. arch/powerpc/mm/dump_linuxpagetables.c: In function 'walk_pagetables': arch/powerpc/mm/dump_linuxpagetables.c:369:10: error: 'KERN_VIRT_START' undeclared (first use in this function) ... Fixes: 8eb07b18 ("powerpc/mm: Dump linux pagetables") Signed-off-by:
-
