- 03 Jul, 2014 1 commit
-
-
Amitkumar Karwar authored
There are few places at the begining of Tx/Rx paths where tx_info/rx_info is not correctly initialized. This patch takes care of it. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
- 26 Jun, 2014 1 commit
-
-
- 25 Jun, 2014 5 commits
-
-
Arend van Spriel authored
The function brcmf_usb_dlneeded() queries the device to obtain the chip id and revision. So assigning these in bus interface before the call resulted in chip id and revision being zero. This was introduced by: commit 5b8045d4 Author: Arend van Spriel <arend@broadcom.com> Date: Tue May 27 12:56:23 2014 +0200 brcmfmac: use asynchronous firmware request in USB Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Amitkumar Karwar authored
https://bugzilla.kernel.org/show_bug.cgi?id=70191 https://bugzilla.kernel.org/show_bug.cgi?id=77581 It is observed that sometimes Tx packet is downloaded without adding driver's txpd header. This results in firmware parsing garbage data as packet length. Sometimes firmware is unable to read the packet if length comes out as invalid. This stops further traffic and timeout occurs. The root cause is uninitialized fields in tx_info(skb->cb) of packet used to get garbage values. In this case if MWIFIEX_BUF_FLAG_REQUEUED_PKT flag is mistakenly set, txpd header was skipped. This patch makes sure that tx_info is correctly initialized to fix the problem. Cc: <stable@vger.kernel.org> Reported-by:
Andrew Wiley <wiley.andrew.j@gmail.com> Reported-by:
Linus Gasser <list@markas-al-nour.org> Reported-by:
Michael Hirsch <hirsch@teufel.de> Tested-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
Maithili Hinge <maithili@marvell.com> Signed-off-by:
-
-
-
-
- 24 Jun, 2014 4 commits
-
-
Arik Nemtsov authored
This reverts commit dc9a1929. 3610 cards don't support UAPSD. Signed-off-by:
Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
Oren Givon authored
Add one more 7265 series HW ID. Edit one existing 7265 series HW ID. CC: <stable@vger.kernel.org> [3.13+] Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
-
Johannes Berg authored
The non-split wiphy state shouldn't be increased in size so move the new set_qos_map command into the split if statement. Cc: stable@vger.kernel.org (3.14+) Fixes: fa9ffc74 ("cfg80211: Add support for QoS mapping") Reviewed-by:
Johannes Berg <johannes.berg@intel.com>
-
Eliad Peller authored
The current sched scan channel configuration code configures all the supported channels for scanning. However, this can result in SYSASSERT in some cases, when the configured channel is disabled. Instead, configure only the channels given in the req struct, and set the channel_count field appropriately. While on it, change the code to use channel->hw_value instead of recalculating the channel number. Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Signed-off-by:
-
- 23 Jun, 2014 4 commits
-
-
Loic Poulain authored
When detecting a non-link packet, h5_reset_rx() frees the Rx skb. Not returning after that will cause the upcoming h5_rx_payload() call to dereference a now NULL Rx skb and trigger a kernel oops. Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
-
Eliad Peller authored
MAX_JIFFY_OFFSET has no meaning when calculating the elapsed jiffies, as jiffies run out until ULONG_MAX. This miscalculation results in erroneous values in case of a wrap-around. Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
-
Johannes Berg authored
This reverts commit 8eca1fb6. Felix notes that this broke regulatory, leaving channel 12 open for AP operation in the US regulatory domain where it isn't permitted. Link: http://mid.gmane.org/53A6C0FF.9090104@openwrt.orgReported-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Max Stepanov authored
After skb allocation and call to ieee80211_wep_encrypt in ieee80211_send_auth the flow fails with a warning in ieee80211_wep_add_iv on verification of available head/tailroom needed for WEP_IV and WEP_ICV. Signed-off-by:
Max Stepanov <Max.Stepanov@intel.com> Signed-off-by:
-
- 20 Jun, 2014 5 commits
-
-
Lukasz Rymanowski authored
When pairing fails hci_conn refcnt drops below zero. This cause that ACL link is not disconnected when disconnect timeout fires. Probably this is because l2cap_conn_del calls l2cap_chan_del for each channel, and inside l2cap_chan_del conn is dropped. After that loop hci_chan_del is called which also drops conn. Anyway, as it is desrcibed in hci_core.h, it is known that refcnt drops below 0 sometimes and it should be fine. If so, let disconnect link when hci_conn_timeout fires and refcnt is 0 or below. This patch does it. This affects PTS test SM_TC_JW_BV_05_C Logs from scenario: [69713.706227] [6515] pair_device: [69713.706230] [6515] hci_conn_add: hci0 dst 00:1b:dc:06:06:22 [69713.706233] [6515] hci_dev_hold: hci0 orig refcnt 8 [69713.706235] [6515] hci_conn_init_sysfs: conn ffff88021f65a000 [69713.706239] [6515] hci_req_add_ev: hci0 opcode 0x200d plen 25 [69713.706242] [6515] hci_prepare_cmd: skb len 28 [69713.706243] [6515] hci_req_run: length 1 [69713.706248] [6515] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 0 [69713.706251] [6515] hci_dev_put: hci0 orig refcnt 9 [69713.706281] [8909] hci_cmd_work: hci0 cmd_cnt 1 cmd queued 1 [69713.706288] [8909] hci_send_frame: hci0 type 1 len 28 [69713.706290] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 28 [69713.706316] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.706382] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.711664] [8909] hci_rx_work: hci0 [69713.711668] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 6 [69713.711680] [8909] hci_rx_work: hci0 Event packet [69713.711683] [8909] hci_cs_le_create_conn: hci0 status 0x00 [69713.711685] [8909] hci_sent_cmd_data: hci0 opcode 0x200d [69713.711688] [8909] hci_req_cmd_complete: opcode 0x200d status 0x00 [69713.711690] [8909] hci_sent_cmd_data: hci0 opcode 0x200d [69713.711695] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.711744] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.818875] [8909] hci_rx_work: hci0 [69713.818889] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 21 [69713.818913] [8909] hci_rx_work: hci0 Event packet [69713.818917] [8909] hci_le_conn_complete_evt: hci0 status 0x00 [69713.818922] [8909] hci_send_to_control: len 19 [69713.818927] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.818938] [8909] hci_conn_add_sysfs: conn ffff88021f65a000 [69713.818975] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 [69713.818981] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 ... [69713.819021] [8909] hci_dev_hold: hci0 orig refcnt 10 [69713.819025] [8909] l2cap_connect_cfm: hcon ffff88021f65a000 bdaddr 00:1b:dc:06:06:22 status 0 [69713.819028] [8909] hci_chan_create: hci0 hcon ffff88021f65a000 [69713.819031] [8909] l2cap_conn_add: hcon ffff88021f65a000 conn ffff880221005c00 hchan ffff88020d60b1c0 [69713.819034] [8909] l2cap_conn_ready: conn ffff880221005c00 [69713.819036] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.819037] [8909] smp_conn_security: conn ffff880221005c00 hcon ffff88021f65a000 level 0x02 [69713.819039] [8909] smp_chan_create: [69713.819041] [8909] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 1 [69713.819043] [8909] smp_send_cmd: code 0x01 [69713.819045] [8909] hci_send_acl: hci0 chan ffff88020d60b1c0 flags 0x0000 [69713.819046] [5949] hci_sock_recvmsg: sock ffff8800941a9900, sk ffff88012bf4e800 [69713.819049] [8909] hci_queue_acl: hci0 nonfrag skb ffff88005157c100 len 15 [69713.819055] [5949] hci_sock_recvmsg: sock ffff8800941a9900, sk ffff88012bf4e800 [69713.819057] [8909] l2cap_le_conn_ready: [69713.819064] [8909] l2cap_chan_create: chan ffff88005ede2c00 [69713.819066] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 1 [69713.819069] [8909] l2cap_sock_init: sk ffff88005ede5800 [69713.819072] [8909] bt_accept_enqueue: parent ffff880160356000, sk ffff88005ede5800 [69713.819074] [8909] __l2cap_chan_add: conn ffff880221005c00, psm 0x00, dcid 0x0004 [69713.819076] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 2 [69713.819078] [8909] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 2 [69713.819080] [8909] smp_conn_security: conn ffff880221005c00 hcon ffff88021f65a000 level 0x01 [69713.819082] [8909] l2cap_sock_ready_cb: sk ffff88005ede5800, parent ffff880160356000 [69713.819086] [8909] le_pairing_complete_cb: status 0 [69713.819091] [8909] hci_tx_work: hci0 acl 10 sco 8 le 0 [69713.819093] [8909] hci_sched_acl: hci0 [69713.819094] [8909] hci_sched_sco: hci0 [69713.819096] [8909] hci_sched_esco: hci0 [69713.819098] [8909] hci_sched_le: hci0 [69713.819099] [8909] hci_chan_sent: hci0 [69713.819101] [8909] hci_chan_sent: chan ffff88020d60b1c0 quote 10 [69713.819104] [8909] hci_sched_le: chan ffff88020d60b1c0 skb ffff88005157c100 len 15 priority 7 [69713.819106] [8909] hci_send_frame: hci0 type 2 len 15 [69713.819108] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 15 [69713.819119] [8909] hci_chan_sent: hci0 [69713.819121] [8909] hci_prio_recalculate: hci0 [69713.819123] [8909] process_pending_rx: [69713.819226] [6450] hci_sock_recvmsg: sock ffff88005e758780, sk ffff88010323d400 ... [69713.822022] [6450] l2cap_sock_accept: sk ffff880160356000 timeo 0 [69713.822024] [6450] bt_accept_dequeue: parent ffff880160356000 [69713.822026] [6450] bt_accept_unlink: sk ffff88005ede5800 state 1 [69713.822028] [6450] l2cap_sock_accept: new socket ffff88005ede5800 [69713.822368] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.822375] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.822383] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.822414] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 ... [69713.823255] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.823259] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.824322] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.824330] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.825029] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69713.825187] [6450] l2cap_sock_sendmsg: sock ffff8800941ab700, sk ffff88005ede5800 [69713.825189] [6450] bt_sock_wait_ready: sk ffff88005ede5800 [69713.825192] [6450] l2cap_create_basic_pdu: chan ffff88005ede2c00 len 3 [69713.825196] [6450] l2cap_do_send: chan ffff88005ede2c00, skb ffff880160b0b500 len 7 priority 0 [69713.825199] [6450] hci_send_acl: hci0 chan ffff88020d60b1c0 flags 0x0000 [69713.825201] [6450] hci_queue_acl: hci0 nonfrag skb ffff880160b0b500 len 11 [69713.825210] [8909] hci_tx_work: hci0 acl 9 sco 8 le 0 [69713.825213] [8909] hci_sched_acl: hci0 [69713.825214] [8909] hci_sched_sco: hci0 [69713.825216] [8909] hci_sched_esco: hci0 [69713.825217] [8909] hci_sched_le: hci0 [69713.825219] [8909] hci_chan_sent: hci0 [69713.825221] [8909] hci_chan_sent: chan ffff88020d60b1c0 quote 9 [69713.825223] [8909] hci_sched_le: chan ffff88020d60b1c0 skb ffff880160b0b500 len 11 priority 0 [69713.825225] [8909] hci_send_frame: hci0 type 2 len 11 [69713.825227] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 11 [69713.825242] [8909] hci_chan_sent: hci0 [69713.825253] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.825253] [8909] hci_prio_recalculate: hci0 [69713.825292] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.825768] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69713.866902] [8909] hci_rx_work: hci0 [69713.866921] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 7 [69713.866928] [8909] hci_rx_work: hci0 Event packet [69713.866931] [8909] hci_num_comp_pkts_evt: hci0 num_hndl 1 [69713.866937] [8909] hci_tx_work: hci0 acl 9 sco 8 le 0 [69713.866939] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.866940] [8909] hci_sched_acl: hci0 ... [69713.866944] [8909] hci_sched_le: hci0 [69713.866953] [8909] hci_chan_sent: hci0 [69713.866997] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.867840] [28074] hci_rx_work: hci0 [69713.867844] [28074] hci_send_to_monitor: hdev ffff88021f0c7000 len 7 [69713.867850] [28074] hci_rx_work: hci0 Event packet [69713.867853] [28074] hci_num_comp_pkts_evt: hci0 num_hndl 1 [69713.867857] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.867858] [28074] hci_tx_work: hci0 acl 10 sco 8 le 0 [69713.867860] [28074] hci_sched_acl: hci0 [69713.867861] [28074] hci_sched_sco: hci0 [69713.867862] [28074] hci_sched_esco: hci0 [69713.867863] [28074] hci_sched_le: hci0 [69713.867865] [28074] hci_chan_sent: hci0 [69713.867888] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145661] [8909] hci_rx_work: hci0 [69714.145666] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 10 [69714.145676] [8909] hci_rx_work: hci0 ACL data packet [69714.145679] [8909] hci_acldata_packet: hci0 len 6 handle 0x002d flags 0x0002 [69714.145681] [8909] hci_conn_enter_active_mode: hcon ffff88021f65a000 mode 0 [69714.145683] [8909] l2cap_recv_acldata: conn ffff880221005c00 len 6 flags 0x2 [69714.145693] [8909] l2cap_recv_frame: len 2, cid 0x0006 [69714.145696] [8909] hci_send_to_control: len 14 [69714.145710] [8909] smp_chan_destroy: [69714.145713] [8909] pairing_complete: status 3 [69714.145714] [8909] cmd_complete: sock ffff88010323ac00 [69714.145717] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 3 [69714.145719] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145720] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 [69714.145722] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 [69714.145724] [6450] bt_sock_poll: sock ffff8801db6b4f00, sk ffff880160351c00 ... [69714.145735] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 [69714.145737] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 2 [69714.145739] [8909] l2cap_conn_del: hcon ffff88021f65a000 conn ffff880221005c00, err 13 [69714.145740] [6450] bt_sock_poll: sock ffff8801db6b5400, sk ffff88021e775000 [69714.145743] [6450] bt_sock_poll: sock ffff8801db6b5e00, sk ffff880160356000 [69714.145744] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 3 [69714.145746] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 [69714.145748] [8909] l2cap_chan_del: chan ffff88005ede2c00, conn ffff880221005c00, err 13 [69714.145749] [8909] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 4 [69714.145751] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 1 [69714.145754] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 [69714.145756] [8909] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 3 [69714.145759] [8909] hci_chan_del: hci0 hcon ffff88021f65a000 chan ffff88020d60b1c0 [69714.145766] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145787] [6515] hci_sock_release: sock ffff88005e75a080 sk ffff88010323ac00 [69714.146002] [6450] hci_sock_recvmsg: sock ffff88005e758780, sk ffff88010323d400 [69714.150795] [6450] l2cap_sock_release: sock ffff8800941ab700, sk ffff88005ede5800 [69714.150799] [6450] l2cap_sock_shutdown: sock ffff8800941ab700, sk ffff88005ede5800 [69714.150802] [6450] l2cap_chan_close: chan ffff88005ede2c00 state BT_CLOSED [69714.150805] [6450] l2cap_sock_kill: sk ffff88005ede5800 state BT_CLOSED [69714.150806] [6450] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 2 [69714.150808] [6450] l2cap_sock_destruct: sk ffff88005ede5800 [69714.150809] [6450] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 1 [69714.150811] [6450] l2cap_chan_destroy: chan ffff88005ede2c00 [69714.150970] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69714.151991] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 0 [69716.150339] [8909] hci_conn_timeout: hcon ffff88021f65a000 state BT_CONNECTED, refcnt -1 Signed-off-by:
Lukasz Rymanowski <lukasz.rymanowski@tieto.com> Signed-off-by:
-
Johan Hedberg authored
If we need an MITM protected connection but the local and remote IO capabilities cannot provide it we should reject the pairing attempt in the appropriate way. This patch adds the missing checks for such a situation to the smp_cmd_pairing_req() and smp_cmd_pairing_rsp() functions. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Johan Hedberg authored
We'll need to do authentication method lookups from more than one place, so refactor the lookup into its own function. Signed-off-by:
-
Johan Hedberg authored
When we receive a pairing request or an internal request to start pairing we shouldn't blindly overwrite the existing pending_sec_level value as that may actually be higher than the new one. This patch fixes the SMP code to only overwrite the value in case the new one is higher than the old. Signed-off-by:
-
Marcel Holtmann authored
This reverts commit ca58e594. For some unclear reason this patch tries to add suport for the product ID 0xe005, but it ends up adding product ID 0x3005 to all the tables. This is obviously wrong and causing multiple issues. The original patch seemed to be fine, but what ended up in 3.15 is not what the patch intended. The commit 0a3658cc is already present and adds support for this hardware. This means only revert of this broken commit is requird. Signed-off-by:
Alexander Holler <holler@ahsoftware.de> Cc: stable@vger.kernel.org # 3.15.x
-
- 17 Jun, 2014 5 commits
-
-
Stanislaw Gruszka authored
As reported by Niels, starting rfkill polling during device probe (commit e2bc7c5f, generally sane change) broke rfkill on rt2500pci device. I considered that bug as some initalization issue, which should be fixed on rt2500pci specific code. But after several attempts (see bug report for details) we fail to find working solution. Hence I decided to revert to old behaviour on rt2500pci to fix regression. Additionally patch also unregister rfkill on device remove instead of ifconfig down, what was another issue introduced by bad commit. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=73821 Fixes: e2bc7c5f ("rt2x00: Fix rfkill_polling register function.") Cc: stable@vger.kernel.org Bisected-by:
Niels <nille0386@googlemail.com> Reported-and-tested-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
-
Rafał Miłecki authored
Support for firmware rev 508+ was added years ago, but we never noticed it reports channel in a different way for G-PHY devices. Instead of offset from 2400 MHz it simply passes channel id (AKA hw_value). So far it was (most probably) affecting monitor mode users only, but the following recent commit made it noticeable for quite everybody: commit 3afc2167 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Tue Mar 4 16:50:13 2014 +0200 cfg80211/mac80211: ignore signal if the frame was heard on wrong channel Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Cc: stable@vger.kernel.org Tested-by:
-
Michael Braun authored
The device 057c:8501 (AVM Fritz! WLAN v2 rev. B) boots into a state that does not actually require loading a firmware file. The vendors driver finds out about this by checking a firmware state register, so this patch adds this here. Finally, with this patch applied, my wifi dongle actually becomes useful (scan + connect to wpa network works). Signed-off-by:
Michael Braun <michael-dev@fami-braun.de> Acked-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Michael Braun authored
The device 057c:8501 (AVM Fritz! WLAN v2 rev. B) currently does not load. One thing observed is that the vendors driver detects EFUSE mode for this device, but rt2800usb does not. This is due to rt2800usb lacking a check for the firmware mode present in the vendors driver, that this patch adopts for rt2800usb. With this patch applied, the 'RF chipset' detection does no longer fail. Signed-off-by:
-
-
- 16 Jun, 2014 8 commits
-
-
Rafał Miłecki authored
Reported-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Stanislaw Gruszka authored
On USB we can not get atomically TKIP key. We have to disable support for TKIP acceleration on USB hardware to avoid bug as showed bellow. [ 860.827243] BUG: scheduling while atomic: hostapd/3397/0x00000002 <snip> [ 860.827280] Call Trace: [ 860.827282] [<ffffffff81682ea6>] dump_stack+0x4d/0x66 [ 860.827284] [<ffffffff8167eb9b>] __schedule_bug+0x47/0x55 [ 860.827285] [<ffffffff81685bb3>] __schedule+0x733/0x7b0 [ 860.827287] [<ffffffff81685c59>] schedule+0x29/0x70 [ 860.827289] [<ffffffff81684f8a>] schedule_timeout+0x15a/0x2b0 [ 860.827291] [<ffffffff8105ac50>] ? ftrace_raw_event_tick_stop+0xc0/0xc0 [ 860.827294] [<ffffffff810c13c2>] ? __module_text_address+0x12/0x70 [ 860.827296] [<ffffffff81686823>] wait_for_completion_timeout+0xb3/0x140 [ 860.827298] [<ffffffff81080fc0>] ? wake_up_state+0x20/0x20 [ 860.827301] [<ffffffff814d5b3d>] usb_start_wait_urb+0x7d/0x150 [ 860.827303] [<ffffffff814d5cd5>] usb_control_msg+0xc5/0x110 [ 860.827305] [<ffffffffa02fb0c6>] rt2x00usb_vendor_request+0xc6/0x160 [rt2x00usb] [ 860.827307] [<ffffffffa02fb215>] rt2x00usb_vendor_req_buff_lock+0x75/0x150 [rt2x00usb] [ 860.827309] [<ffffffffa02fb393>] rt2x00usb_vendor_request_buff+0xa3/0xe0 [rt2x00usb] [ 860.827311] [<ffffffffa023d1a3>] rt2x00usb_register_multiread+0x33/0x40 [rt2800usb] [ 860.827314] [<ffffffffa05805f9>] rt2800_get_tkip_seq+0x39/0x50 [rt2800lib] [ 860.827321] [<ffffffffa0480f88>] ieee80211_get_key+0x218/0x2a0 [mac80211] [ 860.827322] [<ffffffff815cc68c>] ? __nlmsg_put+0x6c/0x80 [ 860.827329] [<ffffffffa051b02e>] nl80211_get_key+0x22e/0x360 [cfg80211] Cc: stable@vger.kernel.org Reported-and-tested-by:
Peter Wu <lekensteyn@gmail.com> Reported-and-tested-by:
Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by:
-
Chin-Ran Lo authored
On PCIe Tx data path, network interface specific tx_info parameters such as bss_num and bss_type are saved at "skb->cb + sizeof(dma_addr_t)" (returned by MWIFIEX_SKB_TXCB). Later mwifiex_map_pci_memory() called from mwifiex_pcie_send_data() will memcpy sizeof(struct mwifiex_dma_mapping) bytes to save PCIe DMA address and length information at beginning of skb->cb. This accidently overwrites bss_num and bss_type saved in skb->cb previously because bss_num/bss_type and mwifiex_dma_mapping data overlap. Similarly, on PCIe Rx data path, rx_info parameters overlaps with PCIe DMA address and length information too. Fix it by defining mwifiex_cb structure and having MWIFIEX_SKB_TXCB and MWIFIEX_SKB_RXCB return the correct address of tx_info/rx_info using the structure members. Also add a BUILD_BUG_ON to maks sure that mwifiex_cb structure doesn't exceed the size of skb->cb. Reviewed-by:
Aaron Durbin <adurbin@chromium.org> Signed-off-by:
Chin-Ran Lo <crlo@marvell.com> Signed-off-by:
-
Rafał Miłecki authored
This fixes regression introduced by adding some G-PHY devices to the list of dual band devices. There is simply no support for 5 GHz on G-PHY devices in b43. It results in: WARNING: CPU: 0 PID: 79 at drivers/net/wireless/b43/phy_g.c:75 b43_gphy_channel_switch+0x125/0x130 [b43]() b43-phy1 ERROR: PHY init: Channel switch to default failed Regression was introduced by the following commit: commit 773cfc50 Author: Rafał Miłecki <zajec5@gmail.com> Date: Mon May 19 23:18:55 2014 +0200 b43: add more devices to the bands database Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix checksumming regressions, from Tom Herbert. 2) Undo unintentional permissions changes for SCTP rto_alpha and rto_beta sysfs knobs, from Denial Borkmann. 3) VXLAN, like other IP tunnels, should advertize it's encapsulation size using dev->needed_headroom instead of dev->hard_header_len. From Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: sctp: fix permissions for rto_alpha and rto_beta knobs vxlan: Checksum fixes net: add skb_pop_rcv_encapsulation udp: call __skb_checksum_complete when doing full checksum net: Fix save software checksum complete net: Fix GSO constants to match NETIF flags udp: ipv4: do not waste time in __udp4_lib_mcast_demux_lookup vxlan: use dev->needed_headroom instead of dev->hard_header_len MAINTAINERS: update cxgb4 maintainer -
git://git.linaro.org/people/mike.turquette/linuxLinus Torvalds authored
Pull more clock framework updates from Mike Turquette: "This contains the second half the of the clk changes for 3.16. They are simply fixes and code refactoring for the OMAP clock drivers. The sunxi clock driver changes include splitting out the one mega-driver into several smaller pieces and adding support for the A31 SoC clocks" * tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits) clk: sunxi: document PRCM clock compatible strings clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support clk: sun6i: Protect SDRAM gating bit clk: sun6i: Protect CPU clock clk: sunxi: Rework clock protection code clk: sunxi: Move the GMAC clock to a file of its own clk: sunxi: Move the 24M oscillator to a file of its own clk: sunxi: Remove calls to clk_put clk: sunxi: document new A31 USB clock compatible clk: sunxi: Implement A31 USB clock ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC) CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic) dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock CLK: TI: gate: add composite interface clock to OMAP2 only build ARM: OMAP2: clock: add DT boot support for cpufreq_ck CLK: TI: OMAP2: add clock init support ...
-
git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds authored
Pull NVMe update from Matthew Wilcox: "Mostly bugfixes again for the NVMe driver. I'd like to call out the exported tracepoint in the block layer; I believe Keith has cleared this with Jens. We've had a few reports from people who're really pounding on NVMe devices at scale, hence the timeout changes (and new module parameters), hotplug cpu deadlock, tracepoints, and minor performance tweaks" [ Jens hadn't seen that tracepoint thing, but is ok with it - it will end up going away when mq conversion happens ] * git://git.infradead.org/users/willy/linux-nvme: (22 commits) NVMe: Fix START_STOP_UNIT Scsi->NVMe translation. NVMe: Use Log Page constants in SCSI emulation NVMe: Define Log Page constants NVMe: Fix hot cpu notification dead lock NVMe: Rename io_timeout to nvme_io_timeout NVMe: Use last bytes of f/w rev SCSI Inquiry NVMe: Adhere to request queue block accounting enable/disable NVMe: Fix nvme get/put queue semantics NVMe: Delete NVME_GET_FEAT_TEMP_THRESH NVMe: Make admin timeout a module parameter NVMe: Make iod bio timeout a parameter NVMe: Prevent possible NULL pointer dereference NVMe: Fix the buffer size passed in GetLogPage(CDW10.NUMD) NVMe: Update data structures for NVMe 1.2 NVMe: Enable BUILD_BUG_ON checks NVMe: Update namespace and controller identify structures to the 1.1a spec NVMe: Flush with data support NVMe: Configure support for block flush NVMe: Add tracepoints NVMe: Protect against badly formatted CQEs ...
-
- 15 Jun, 2014 7 commits
-
-
Daniel Borkmann authored
Commit 3fd091e7 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") has silently changed permissions for rto_alpha and rto_beta knobs from 0644 to 0444. The purpose of this was to discourage users from tweaking rto_alpha and rto_beta knobs in production environments since they are key to correctly compute rtt/srtt. RFC4960 under section 6.3.1. RTO Calculation says regarding rto_alpha and rto_beta under rule C3 and C4: [...] C3) When a new RTT measurement R' is made, set RTTVAR <- (1 - RTO.Beta) * RTTVAR + RTO.Beta * |SRTT - R'| and SRTT <- (1 - RTO.Alpha) * SRTT + RTO.Alpha * R' Note: The value of SRTT used in the update to RTTVAR is its value before updating SRTT itself using the second assignment. After the computation, update RTO <- SRTT + 4 * RTTVAR. C4) When data is in flight and when allowed by rule C5 below, a new RTT measurement MUST be made each round trip. Furthermore, new RTT measurements SHOULD be made no more than once per round trip for a given destination transport address. There are two reasons for this recommendation: First, it appears that measuring more frequently often does not in practice yield any significant benefit [ALLMAN99]; second, if measurements are made more often, then the values of RTO.Alpha and RTO.Beta in rule C3 above should be adjusted so that SRTT and RTTVAR still adjust to changes at roughly the same rate (in terms of how many round trips it takes them to reflect new values) as they would if making only one measurement per round-trip and using RTO.Alpha and RTO.Beta as given in rule C3. However, the exact nature of these adjustments remains a research issue. [...] While it is discouraged to adjust rto_alpha and rto_beta and not further specified how to adjust them, the RFC also doesn't explicitly forbid it, but rather gives a RECOMMENDED default value (rto_alpha=3, rto_beta=2). We have a couple of users relying on the old permissions before they got changed. That said, if someone really has the urge to adjust them, we could allow it with a warning in the log. Fixes: 3fd091e7 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tom Herbert says: ==================== Fixes related to some recent checksum modifications. - Fix GSO constants to match NETIF flags - Fix logic in saving checksum complete in __skb_checksum_complete - Call __skb_checksum_complete from UDP if we are checksumming over whole packet in order to save checksum. - Fixes to VXLAN to work correctly with checksum complete ==================== Signed-off-by: -
Tom Herbert authored
Call skb_pop_rcv_encapsulation and postpull_rcsum for the Ethernet header to work properly with checksum complete. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
Tom Herbert authored
This function is used by UDP encapsulation protocols in RX when crossing encapsulation boundary. If ip_summed is set to CHECKSUM_UNNECESSARY and encapsulation is not set, change to CHECKSUM_NONE since the checksum has not been validated within the encapsulation. Clears csum_valid by the same rationale. Signed-off-by:
-
Tom Herbert authored
In __udp_lib_checksum_complete check if checksum is being done over all the data (len is equal to skb->len) and if it is call __skb_checksum_complete instead of __skb_checksum_complete_head. This allows checksum to be saved in checksum complete. Signed-off-by:
-
Tom Herbert authored
Geert reported issues regarding checksum complete and UDP. The logic introduced in commit 7e3cead5 ("net: Save software checksum complete") is not correct. This patch: 1) Restores code in __skb_checksum_complete_header except for setting CHECKSUM_UNNECESSARY. This function may be calculating checksum on something less than skb->len. 2) Adds saving checksum to __skb_checksum_complete. The full packet checksum 0..skb->len is calculated without adding in pseudo header. This value is saved in skb->csum and then the pseudo header is added to that to derive the checksum for validation. 3) In both __skb_checksum_complete_header and __skb_checksum_complete, set skb->csum_valid to whether checksum of zero was computed. This allows skb_csum_unnecessary to return true without changing to CHECKSUM_UNNECESSARY which was done previously. 4) Copy new csum related bits in __copy_skb_header. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Tom Herbert authored
Joseph Gasparakis reported that VXLAN GSO offload stopped working with i40e device after recent UDP changes. The problem is that the SKB_GSO_* bits are out of sync with the corresponding NETIF flags. This patch fixes that. Also, we add BUILD_BUG_ONs in net_gso_ok for several GSO constants that were missing to avoid the problem in the future. Reported-by:
Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by:
-
