This patch adds support for one channel CAN/USB interace CPC-USB/ARM7 from
EMS Dr. Thomas Wuensche (http://www.ems-wuensche.com).
Signed-off-by: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch prepares replacing the staging driver cpc-usb with the new
developed ems_usb CAN driver.
Signed-off-by: Sebastian Haas <haas@ems-wuensche.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

With the removal of BUS_ID_SIZE, cpmac was not fully
converted to use MII_BUS_ID_SIZE as it ought to. This
patch fixes the following cpmac build failure:
 CC      drivers/net/cpmac.o
drivers/net/cpmac.c: In function 'cpmac_start_xmit':
drivers/net/cpmac.c:563: warning: comparison of distinct pointer types lacks a cast
drivers/net/cpmac.c: In function 'cpmac_probe':
drivers/net/cpmac.c:1112: error: 'BUS_ID_SIZE' undeclared (first use in this function)
drivers/net/cpmac.c:1112: error: (Each undeclared identifier is reported only once
drivers/net/cpmac.c:1112: error: for each function it appears in.)
Reported-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

All cmds issued to BE after the creation of mccq must now use the mcc-q
(and not mbox) to avoid a hw issue that results in mbox poll timeout.
Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

use the wrong API when free dma. So when map dma use a flag to
demostrate whether it is 'pci_map_single' or 'pci_map_page'. When free
the dma, check the flags to select the right APIs('pci_unmap_single'
or 'pci_unmap_page').

set the flags type to u16  instead of unsigned long  on David's comments.
Signed-off-by: Jie Yang <jie.yang@atheros.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some classful qdiscs miss qstats.qlen updating with q.qlen of their
child qdiscs in dump_stats methods.
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an interface has multiple addresses, the current message for DAD
failure isn't really helpful, so this patch adds the address itself to
the printk.
Signed-off-by: Jens Rosenboom <me@jayr.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

iucv_sock_recvmsg() and iucv_process_message()/iucv_fragment_skb race
for dequeuing an skb from the backlog queue.

If iucv_sock_recvmsg() dequeues first, iucv_process_message() calls
sock_queue_rcv_skb() with an skb that is NULL.

This results in the following kernel panic:

<1>Unable to handle kernel pointer dereference at virtual kernel address (null)
<4>Oops: 0004 [#1] PREEMPT SMP DEBUG_PAGEALLOC
<4>Modules linked in: af_iucv sunrpc qeth_l3 dm_multipath dm_mod vmur qeth ccwgroup
<4>CPU: 0 Not tainted 2.6.30 #4
<4>Process client-iucv (pid: 4787, task: 0000000034e75940, ksp: 00000000353e3710)
<4>Krnl PSW : 0704000180000000 000000000043ebca (sock_queue_rcv_skb+0x7a/0x138)
<4>           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 EA:3
<4>Krnl GPRS: 0052900000000000 000003e0016e0fe8 0000000000000000 0000000000000000
<4>           000000000043eba8 0000000000000002 0000000000000001 00000000341aa7f0
<4>           0000000000000000 0000000000007800 0000000000000000 0000000000000000
<4>           00000000341aa7f0 0000000000594650 000000000043eba8 000000003fc2fb28
<4>Krnl Code: 000000000043ebbe: a7840006            brc     8,43ebca
<4>           000000000043ebc2: 5930c23c            c       %r3,572(%r12)
<4>           000000000043ebc6: a724004c            brc     2,43ec5e
<4>          >000000000043ebca: e3c0b0100024        stg     %r12,16(%r11)
<4>           000000000043ebd0: a7190000            lghi    %r1,0
<4>           000000000043ebd4: e310b0200024        stg     %r1,32(%r11)
<4>           000000000043ebda: c010ffffdce9        larl    %r1,43a5ac
<4>           000000000043ebe0: e310b0800024        stg     %r1,128(%r11)
<4>Call Trace:
<4>([<000000000043eba8>] sock_queue_rcv_skb+0x58/0x138)
<4> [<000003e0016bcf2a>] iucv_process_message+0x112/0x3cc [af_iucv]
<4> [<000003e0016bd3d4>] iucv_callback_rx+0x1f0/0x274 [af_iucv]
<4> [<000000000053a21a>] iucv_message_pending+0xa2/0x120
<4> [<000000000053b5a6>] iucv_tasklet_fn+0x176/0x1b8
<4> [<000000000014fa82>] tasklet_action+0xfe/0x1f4
<4> [<0000000000150a56>] __do_softirq+0x116/0x284
<4> [<0000000000111058>] do_softirq+0xe4/0xe8
<4> [<00000000001504ba>] irq_exit+0xba/0xd8
<4> [<000000000010e0b2>] do_extint+0x146/0x190
<4> [<00000000001184b6>] ext_no_vtime+0x1e/0x22
<4> [<00000000001fbf4e>] kfree+0x202/0x28c
<4>([<00000000001fbf44>] kfree+0x1f8/0x28c)
<4> [<000000000044205a>] __kfree_skb+0x32/0x124
<4> [<000003e0016bd8b2>] iucv_sock_recvmsg+0x236/0x41c [af_iucv]
<4> [<0000000000437042>] sock_aio_read+0x136/0x160
<4> [<0000000000205e50>] do_sync_read+0xe4/0x13c
<4> [<0000000000206dce>] vfs_read+0x152/0x15c
<4> [<0000000000206ed0>] SyS_read+0x54/0xac
<4> [<0000000000117c8e>] sysc_noemu+0x10/0x16
<4> [<00000042ff8def3c>] 0x42ff8def3c
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For non-accepted sockets on the accept queue, iucv_sock_kill()
is called twice (in iucv_sock_close() and iucv_sock_cleanup_listen()).
This typically results in a kernel oops as shown below.

Remove the duplicate call to iucv_sock_kill() and set the SOCK_ZAPPED
flag in iucv_sock_close() only.

The iucv_sock_kill() function frees a socket only if the socket is zapped
and orphaned (sk->sk_socket == NULL):
  - Non-accepted sockets are always orphaned and, thus, iucv_sock_kill()
    frees the socket twice.
  - For accepted sockets or sockets created with iucv_sock_create(),
    sk->sk_socket is initialized. This caused the first call to
    iucv_sock_kill() to return immediately. To free these sockets,
    iucv_sock_release() uses sock_orphan() before calling iucv_sock_kill().

<1>Unable to handle kernel pointer dereference at virtual kernel address 000000003edd3000
<4>Oops: 0011 [#1] PREEMPT SMP DEBUG_PAGEALLOC
<4>Modules linked in: af_iucv sunrpc qeth_l3 dm_multipath dm_mod qeth vmur ccwgroup
<4>CPU: 0 Not tainted 2.6.30 #4
<4>Process iucv_sock_close (pid: 2486, task: 000000003aea4340, ksp: 000000003b75bc68)
<4>Krnl PSW : 0704200180000000 000003e00168e23a (iucv_sock_kill+0x2e/0xcc [af_iucv])
<4>           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3
<4>Krnl GPRS: 0000000000000000 000000003b75c000 000000003edd37f0 0000000000000001
<4>           000003e00168ec62 000000003988d960 0000000000000000 000003e0016b0608
<4>           000000003fe81b20 000000003839bb58 00000000399977f0 000000003edd37f0
<4>           000003e00168b000 000003e00168f138 000000003b75bcd0 000000003b75bc98
<4>Krnl Code: 000003e00168e22a: c0c0ffffe6eb	larl	%r12,3e00168b000
<4>           000003e00168e230: b90400b2		lgr	%r11,%r2
<4>           000003e00168e234: e3e0f0980024	stg	%r14,152(%r15)
<4>          >000003e00168e23a: e310225e0090	llgc	%r1,606(%r2)
<4>           000003e00168e240: a7110001		tmll	%r1,1
<4>           000003e00168e244: a7840007		brc	8,3e00168e252
<4>           000003e00168e248: d507d00023c8	clc	0(8,%r13),968(%r2)
<4>           000003e00168e24e: a7840009		brc	8,3e00168e260
<4>Call Trace:
<4>([<000003e0016b0608>] afiucv_dbf+0x0/0xfffffffffffdea20 [af_iucv])
<4> [<000003e00168ec6c>] iucv_sock_close+0x130/0x368 [af_iucv]
<4> [<000003e00168ef02>] iucv_sock_release+0x5e/0xe4 [af_iucv]
<4> [<0000000000438e6c>] sock_release+0x44/0x104
<4> [<0000000000438f5e>] sock_close+0x32/0x50
<4> [<0000000000207898>] __fput+0xf4/0x250
<4> [<00000000002038aa>] filp_close+0x7a/0xa8
<4> [<00000000002039ba>] SyS_close+0xe2/0x148
<4> [<0000000000117c8e>] sysc_noemu+0x10/0x16
<4> [<00000042ff8deeac>] 0x42ff8deeac
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After resuming from suspend, all af_iucv sockets are disconnected.
Ensure that iucv_accept_dequeue() can handle disconnected sockets
which are not yet accepted.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moving prepare_to_wait before the condition to avoid a race between
schedule_timeout and wake up.
The race can appear during iucv_sock_connect() and iucv_callback_connack().
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The iucv_query_maxconn() function uses the wrong output register and
stores the size of the interrupt buffer instead of the maximum number
of connections.

According to the QUERY IUCV function, general register 1 contains the
maximum number of connections.

If the maximum number of connections is not set properly, the following
warning is displayed:

Badness at /usr/src/kernel-source/2.6.30-39.x.20090806/net/iucv/iucv.c:1808
Modules linked in: netiucv fsm af_iucv sunrpc qeth_l3 dm_multipath dm_mod vmur qeth ccwgroup
CPU: 0 Tainted: G        W  2.6.30 #4
Process seq (pid: 16925, task: 0000000030e24a40, ksp: 000000003033bd98)
Krnl PSW : 0404200180000000 000000000053b270 (iucv_external_interrupt+0x64/0x224)
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3
Krnl GPRS: 00000000011279c2 00000000014bdb70 0029000000000000 0000000000000029
           000000000053b236 000000000001dba4 0000000000000000 0000000000859210
           0000000000a67f68 00000000008a6100 000000003f83fb90 0000000000004000
           000000003f8c7bc8 00000000005a2250 000000000053b236 000000003fc2fe08
Krnl Code: 000000000053b262: e33010000021	clg	%r3,0(%r1)
           000000000053b268: a7440010		brc	4,53b288
           000000000053b26c: a7f40001		brc	15,53b26e
          >000000000053b270: c03000184134	larl	%r3,8434d8
           000000000053b276: eb220030000c	srlg	%r2,%r2,48
           000000000053b27c: eb6ff0a00004	lmg	%r6,%r15,160(%r15)
           000000000053b282: c0f4fffff6a7	brcl	15,539fd0
           000000000053b288: 4310a003		ic	%r1,3(%r10)
Call Trace:
([<000000000053b236>] iucv_external_interrupt+0x2a/0x224)
 [<000000000010e09e>] do_extint+0x132/0x190
 [<00000000001184b6>] ext_no_vtime+0x1e/0x22
 [<0000000000549f7a>] _spin_unlock_irqrestore+0x96/0xa4
([<0000000000549f70>] _spin_unlock_irqrestore+0x8c/0xa4)
 [<00000000002101d6>] pipe_write+0x3da/0x5bc
 [<0000000000205d14>] do_sync_write+0xe4/0x13c
 [<0000000000206a7e>] vfs_write+0xae/0x15c
 [<0000000000206c24>] SyS_write+0x54/0xac
 [<0000000000117c8e>] sysc_noemu+0x10/0x16
 [<00000042ff8defcc>] 0x42ff8defcc
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prior to calling IUCV functions, the DECLARE BUFFER function must have been
called for at least one CPU to receive IUCV interrupts.

With commit "iucv: establish reboot notifier" (6c005961), a check has been
introduced to avoid calling IUCV functions if the current CPU does not have
an interrupt buffer declared.
Because one interrupt buffer is sufficient, change the condition to ensure
that one interrupt buffer is available.

In addition, checking the buffer on the current CPU creates a race with
CPU up/down notifications: before checking the buffer, the IUCV function
might be interrupted by an smp_call_function() that retrieves the interrupt
buffer for the current CPU.
When the IUCV function continues, the check fails and -EIO is returned. If a
buffer is available on any other CPU, the IUCV function call must be invoked
(instead of failing with -EIO).
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During suspend IUCV exploiters have to close their IUCV connections.
When restoring an image, it can be checked if all IUCV pathes had
been closed before the Linux instance was suspended. If not, an
error message is issued to indicate a problem in one of the
used programs exploiting IUCV communication.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/core/netpoll.c::netpoll_send_skb() calls the poll handler when
it is available. As netconsole can be used from almost any context,
IRQ must not be enabled blindly in the NAPI handler of the driver
which supports netpoll.

Call trace:
netpoll_send_skb()
{
local_irq_save(flags)
  -> netpoll_poll()
    -> poll_napi()
      -> poll_one_napi()
        -> napi->poll()
            -> b44_poll()
local_irq_restore(flags)
}
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RFC4191 says that "If the Reserved (10) value is received, the Route
Information Option MUST be ignored.", so this patch makes us conform
to the RFC. This is different to the usage of the Default Router
Preference, where an invalid value must indeed be treated as
PREF_MEDIUM.
Signed-off-by: Jens Rosenboom <me@jayr.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

When I was implementing primary_passive option (formely named primary_lazy) I've
run into troubles with ab_arp. This is the only mode which is not using
bond_select_active_slave() function to select active slave and instead it
selects it itself. This seems to be not the right behaviour and it would be
better to do it in bond_select_active_slave() for all cases. This patch makes
this happen. Please review.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's a check saying
	/* we're good if we have both BSSID and channel */
	if (wdev->conn->params.bssid && wdev->conn->params.channel) {

but that isn't true -- we need the BSS struct. This leads
to errors such as

    Trying to associate with 00:1b:53:11:dc:40 (SSID='TEST' freq=2412 MHz)
    ioctl[SIOCSIWFREQ]: No such file or directory
    ioctl[SIOCSIWESSID]: No such file or directory
    Association request to the driver failed
    Associated with 00:1b:53:11:dc:40

in wpa_supplicant, as reported by Holger.

Instead, we really need to have the BSS struct, and if we
don't, then we need to initiate a scan for it. But we may
already have the BSS struct here, so hang on to it if we
do and scan if we don't.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The contention window is supposed to be a power of two minus one, i.e.
15, 31, 63, 127...  minstrel_rate_init() forgets to subtract 1, so the
sequence becomes 15, 32, 66, 134...

Bug reported by Dan Halperin <dhalperi@cs.washington.edu>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Fix printk format warnings:

drivers/ssb/sdio.c:336: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t'
drivers/ssb/sdio.c:443: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch adds a new usbid for Zcomax XG-705A to the device table.

Cc: stable@kernel.org
Reported-by: Jari Jaakola <jari.jaakola@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Use uX rather than uintX_t types for consistency.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

catas_reset() uses pointer to mlx4_priv, but mlx4_priv is not valid
after call mlx4_restart_one().
Signed-off-by: Vitaliy Gusev <vgusev@openvz.org>
Acked-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I have recently came across a preemption imbalance detected by:

<4>huh, entered ffffffff80644630 with preempt_count 00000102, exited with 00000101?
<0>------------[ cut here ]------------
<2>kernel BUG at /usr/src/linux/kernel/timer.c:664!
<0>invalid opcode: 0000 [1] PREEMPT SMP

with ffffffff80644630 being inet_twdr_hangman().

This appeared after I enabled CONFIG_TCP_MD5SIG and played with it a
bit, so I looked at what might have caused it.

One thing that struck me as strange is tcp_twsk_destructor(), as it
calls tcp_put_md5sig_pool() -- which entails a put_cpu(), causing the
detected imbalance. Found on 2.6.23.9, but 2.6.31 is affected as well,
as far as I can tell.
Signed-off-by: Robert Varga <nite@hq.alert.sk>
Signed-off-by: David S. Miller <davem@davemloft.net>

If qdisc_get_stab returns error in qdisc_create there is skipped qdisc
ops->destroy, which is necessary because it's after ops->init at the
moment, so memory leaks are quite probable.
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

Remove __user annotation from optlen arg as it's bogus.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

After the recent mq change there is the new select_queue qdisc class
method used in tc_modify_qdisc, but it works OK only for direct child
qdiscs of mq qdisc. Grandchildren always get the first tx queue, which
would give wrong qdisc_root etc. results (e.g. for sch_htb as child of
sch_prio). This patch fixes it by using parent's dev_queue for such
grandchildren qdiscs. The select_queue method's return type is changed
BTW.

With feedback from: Patrick McHardy <kaber@trash.net>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sorry Mike, I sent you off the wrong way. The following is simpler and the
second port is diffrent enough in setup (because of NAPI), that the
following is simpler.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Be more accurate about number of transmit list elements required.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Parse RxRPC security index 5 type keys (Kerberos 5 tokens).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow RxRPC keys to be read.  This is to allow pioctl() to be implemented in
userspace.  RxRPC keys are read out in XDR format.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow add_key() and KEYCTL_INSTANTIATE to accept key payloads in XDR form as
described by openafs-1.4.10/src/auth/afs_token.xg.  This provides a way of
passing kaserver, Kerberos 4, Kerberos 5 and GSSAPI keys from userspace, and
allows for future expansion.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Declare the security index constants symbolically rather than just referring
to them numerically.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pcnet_cs,serial_cs:
 
add cis of Linksys lan&modem mulitifunction pcmcia card
and some modem card(MT5634ZLX, RS-COM-2P).
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct socket has a 16 bit hole that triggers kmemcheck warnings.

As suggested by Ingo, use kmemcheck annotations
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>