- 12 Jan, 2012 23 commits
-
-
Huajun Li authored
usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops commit 1a3a026b upstream. Echo vendor and product number of a non usb-storage device to usb-storage driver's new_id, then plug in the device to host and you will find following oops msg, the root cause is usb_stor_probe1() refers invalid id entry if giving a dynamic id, so just disable the feature. [ 3105.018012] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 3105.018062] CPU 0 [ 3105.018075] Modules linked in: usb_storage usb_libusual bluetooth dm_crypt binfmt_misc snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep hp_wmi ppdev sparse_keymap snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device psmouse snd serio_raw tpm_infineon soundcore i915 snd_page_alloc tpm_tis parport_pc tpm tpm_bios drm_kms_helper drm i2c_algo_bit video lp parport usbhid hid sg sr_mod sd_mod ehci_hcd uhci_hcd usbcore e1000e usb_common floppy [ 3105.018408] [ 3105.018419] Pid: 189, comm: khubd Tainted: G I 3.2.0-rc7+ #29 Hewlett-Packard HP Compaq dc7800p Convertible Minitower/0AACh [ 3105.018481] RIP: 0010:[<ffffffffa045830d>] [<ffffffffa045830d>] usb_stor_probe1+0x2fd/0xc20 [usb_storage] [ 3105.018536] RSP: 0018:ffff880056a3d830 EFLAGS: 00010286 [ 3105.018562] RAX: ffff880065f4e648 RBX: ffff88006bb28000 RCX: 0000000000000000 [ 3105.018597] RDX: ffff88006f23c7b0 RSI: 0000000000000001 RDI: 0000000000000206 [ 3105.018632] RBP: ffff880056a3d900 R08: 0000000000000000 R09: ffff880067365000 [ 3105.018665] R10: 00000000000002ac R11: 0000000000000010 R12: ffff6000b41a7340 [ 3105.018698] R13: ffff880065f4ef60 R14: ffff88006bb28b88 R15: ffff88006f23d270 [ 3105.018733] FS: 0000000000000000(0000) GS:ffff88007a200000(0000) knlGS:0000000000000000 [ 3105.018773] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 3105.018801] CR2: 00007fc99c8c4650 CR3: 0000000001e05000 CR4: 00000000000006f0 [ 3105.018835] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3105.018870] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 3105.018906] Process khubd (pid: 189, threadinfo ffff880056a3c000, task ffff88005677a400) [ 3105.018945] Stack: [ 3105.018959] 0000000000000000 0000000000000000 ffff880056a3d8d0 0000000000000002 [ 3105.019011] 0000000000000000 ffff880056a3d918 ffff880000000000 0000000000000002 [ 3105.019058] ffff880056a3d8d0 0000000000000012 ffff880056a3d8d0 0000000000000006 [ 3105.019105] Call Trace: [ 3105.019128] [<ffffffffa0458cd4>] storage_probe+0xa4/0xe0 [usb_storage] [ 3105.019173] [<ffffffffa0097822>] usb_probe_interface+0x172/0x330 [usbcore] [ 3105.019211] [<ffffffff815fda67>] driver_probe_device+0x257/0x3b0 [ 3105.019243] [<ffffffff815fdd43>] __device_attach+0x73/0x90 [ 3105.019272] [<ffffffff815fdcd0>] ? __driver_attach+0x110/0x110 [ 3105.019303] [<ffffffff815fb93c>] bus_for_each_drv+0x9c/0xf0 [ 3105.019334] [<ffffffff815fd6c7>] device_attach+0xf7/0x120 [ 3105.019364] [<ffffffff815fc905>] bus_probe_device+0x45/0x80 [ 3105.019396] [<ffffffff815f98a6>] device_add+0x876/0x990 [ 3105.019434] [<ffffffffa0094e42>] usb_set_configuration+0x822/0x9e0 [usbcore] [ 3105.019479] [<ffffffffa00a3492>] generic_probe+0x62/0xf0 [usbcore] [ 3105.019518] [<ffffffffa0097a46>] usb_probe_device+0x66/0xb0 [usbcore] [ 3105.019555] [<ffffffff815fda67>] driver_probe_device+0x257/0x3b0 [ 3105.019589] [<ffffffff815fdd43>] __device_attach+0x73/0x90 [ 3105.019617] [<ffffffff815fdcd0>] ? __driver_attach+0x110/0x110 [ 3105.019648] [<ffffffff815fb93c>] bus_for_each_drv+0x9c/0xf0 [ 3105.019680] [<ffffffff815fd6c7>] device_attach+0xf7/0x120 [ 3105.019709] [<ffffffff815fc905>] bus_probe_device+0x45/0x80 [ 3105.021040] usb usb6: usb auto-resume [ 3105.021045] usb usb6: wakeup_rh [ 3105.024849] [<ffffffff815f98a6>] device_add+0x876/0x990 [ 3105.025086] [<ffffffffa0088987>] usb_new_device+0x1e7/0x2b0 [usbcore] [ 3105.025086] [<ffffffffa008a4d7>] hub_thread+0xb27/0x1ec0 [usbcore] [ 3105.025086] [<ffffffff810d5200>] ? wake_up_bit+0x50/0x50 [ 3105.025086] [<ffffffffa00899b0>] ? usb_remote_wakeup+0xa0/0xa0 [usbcore] [ 3105.025086] [<ffffffff810d49b8>] kthread+0xd8/0xf0 [ 3105.025086] [<ffffffff81939884>] kernel_thread_helper+0x4/0x10 [ 3105.025086] [<ffffffff8192a8c0>] ? _raw_spin_unlock_irq+0x50/0x80 [ 3105.025086] [<ffffffff8192b1b4>] ? retint_restore_args+0x13/0x13 [ 3105.025086] [<ffffffff810d48e0>] ? __init_kthread_worker+0x80/0x80 [ 3105.025086] [<ffffffff81939880>] ? gs_change+0x13/0x13 [ 3105.025086] Code: 00 48 83 05 cd ad 00 00 01 48 83 05 cd ad 00 00 01 4c 8b ab 30 0c 00 00 48 8b 50 08 48 83 c0 30 48 89 45 a0 4c 89 a3 40 0c 00 00 <41> 0f b6 44 24 10 48 89 55 a8 3c ff 0f 84 b8 04 00 00 48 83 05 [ 3105.025086] RIP [<ffffffffa045830d>] usb_stor_probe1+0x2fd/0xc20 [usb_storage] [ 3105.025086] RSP <ffff880056a3d830> [ 3105.060037] hub 6-0:1.0: hub_resume [ 3105.062616] usb usb5: usb auto-resume [ 3105.064317] ehci_hcd 0000:00:1d.7: resume root hub [ 3105.094809] ---[ end trace a7919e7f17c0a727 ]--- [ 3105.130069] hub 5-0:1.0: hub_resume [ 3105.132131] usb usb4: usb auto-resume [ 3105.132136] usb usb4: wakeup_rh [ 3105.180059] hub 4-0:1.0: hub_resume [ 3106.290052] usb usb6: suspend_rh (auto-stop) [ 3106.290077] usb usb4: suspend_rh (auto-stop) Signed-off-by:
Huajun Li <huajun.li.lee@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
commit 59bf5cf9 upstream. We were sending data on the stack when uploading firmware, which causes some machines fits, and is not allowed. Fix this by using the buffer we already had around for this very purpose. Reported-by:
Wouter M. Koolen <wmkoolen@cwi.nl> Tested-by:
-
Julia Lawall authored
commit e7c8e860 upstream. On some failures, the country_code field of an acm structure is freed without freeing the acm structure itself. Elsewhere, operations including memcpy and kfree are performed on the country_code field. The patch sets the country_code field to NULL when it is freed, and likewise sets the country_code_size field to 0. Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Jan Kara authored
commit d2eb8c35 upstream. During BKL removal in 2.6.38, conversion of files from in-ICB format to normal format got broken. We call ->writepage with i_data_sem held but udf_get_block() also acquires i_data_sem thus creating A-A deadlock. We fix the problem by dropping i_data_sem before calling ->writepage() which is safe since i_mutex still protects us against any changes in the file. Also fix pagelock - i_data_sem lock inversion in udf_expand_file_adinicb() by dropping i_data_sem before calling find_or_create_page(). Reported-by:
Matthias Matiak <netzpython@mail-on.us> Tested-by:
Namjae Jeon <linkinjeon@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Li Zefan authored
commit 0d19ea86 upstream. If we mount a hierarchy with a specified name, the name is unique, and we can use it to mount the hierarchy without specifying its set of subsystem names. This feature is documented is Documentation/cgroups/cgroups.txt section 2.3 Here's an example: # mount -t cgroup -o cpuset,name=myhier xxx /cgroup1 # mount -t cgroup -o name=myhier xxx /cgroup2 But it was broken by commit 32a8cf23 (cgroup: make the mount options parsing more accurate) This fixes the regression. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Claudio Scordino authored
commit dbf1115d upstream. Patch to fix a spinlock lockup in the driver that sometimes happens when the tasklet starts. Signed-off-by:
Claudio Scordino <claudio@evidence.eu.com> Signed-off-by:
Dave Bender <codehero@gmail.com> Tested-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Stern authored
commit d8cae98c upstream. The documentation for usbmon is out of date; the usbfs "devices" file now exists in /sys/kernel/debug/usb rather than /proc/bus/usb. This patch (as1505) updates the documentation accordingly, and also mentions that the necessary information can be found by running lsusb. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Jan Kara authored
commit 33c104d4 upstream. WARN_ON_ONCE(IS_RDONLY(inode)) tends to trip when filesystem hits error and is remounted read-only. This unnecessarily scares users (well, they should be scared because of filesystem error, but the stack trace distracts them from the right source of their fear ;-). We could as well just remove the WARN_ON but it's not hard to fix it to not trip on filesystem with errors and not use more cycles in the common case so that's what we do. Signed-off-by:
-
Jeff Mahoney authored
commit a9e36da6 upstream. This patch fixes a crash in reiserfs_delete_xattrs during umount. When shrink_dcache_for_umount clears the dcache from generic_shutdown_super, delayed evictions are forced to disk. If an evicted inode has extended attributes associated with it, it will need to walk the xattr tree to locate and remove them. But since shrink_dcache_for_umount will BUG if it encounters active dentries, the xattr tree must be released before it's called or it will crash during every umount. This patch forces the evictions to occur before generic_shutdown_super by calling shrink_dcache_sb first. The additional evictions caused by the removal of each associated xattr file and dir will be automatically handled as they're added to the LRU list. CC: reiserfs-devel@vger.kernel.org Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Jan Kara authored
commit a06d789b upstream. When jqfmt mount option is not specified on remount, we mistakenly clear s_jquota_fmt value stored in superblock. Fix the problem. CC: reiserfs-devel@vger.kernel.org Signed-off-by:
-
Steven Rostedt authored
commit 49908a1b upstream. A update is made to the sched:sched_switch event that adds some logic to the first parameter of the __print_flags() that shows the state of tasks. This change cause perf to fail parsing the flags. A simple fix is needed to have the parser be able to process ops within the argument. Reported-by:
Andrew Vagin <avagin@openvz.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Ram Vepa authored
commit eddfb675 upstream. Prevent a receive data corruption by ensuring that the write to update the rcvhdrheadn register to generate an interrupt is at the very end of the receive processing. Signed-off-by:
Ramkrishna Vepa <ram.vepa@qlogic.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Aurelien Jacobs authored
commit e8303a3b upstream. Adds the device id needed for the USB Ethernet Adapter delivered by ASUS with their Zenbook. Signed-off-by:
Aurelien Jacobs <aurel@gnuage.org> Acked-by:
Grant Grundler <grundler@chromium.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Li Zhong authored
commit e4f387d8 upstream. Unpaired calling of probe_hcall_entry and probe_hcall_exit might happen as following, which could cause incorrect preempt count. __trace_hcall_entry => trace_hcall_entry -> probe_hcall_entry => get_cpu_var => preempt_disable __trace_hcall_exit => trace_hcall_exit -> probe_hcall_exit => put_cpu_var => preempt_enable where: A => B and A -> B means A calls B, but => means A will call B through function name, and B will definitely be called. -> means A will call B through function pointer, so B might not be called if the function pointer is not set. So error happens when only one of probe_hcall_entry and probe_hcall_exit get called during a hcall. This patch tries to move the preempt count operations from probe_hcall_entry and probe_hcall_exit to its callers. Reported-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Li Zhong <zhong@linux.vnet.ibm.com> Tested-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Anton Blanchard authored
commit 37fb9a02 upstream. When re-enabling interrupts we have code to handle edge sensitive decrementers by resetting the decrementer to 1 whenever it is negative. If interrupts were disabled long enough that the decrementer wrapped to positive we do nothing. This means interrupts can be delayed for a long time until it finally goes negative again. While we hope interrupts are never be disabled long enough for the decrementer to go positive, we have a very good test team that can drive any kernel into the ground. The softlockup data we get back from these fails could be seconds in the future, completely missing the cause of the lockup. We already keep track of the timebase of the next event so use that to work out if we should trigger a decrementer exception. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Pontus Fuchs authored
commit f6efe96e upstream. An nvs with malformed contents could cause the processing of the calibration data to read beyond the end of the buffer. Prevent this from happening by adding bound checking. Signed-off-by:
Pontus Fuchs <pontus.fuchs@gmail.com> Reviewed-by:
Luciano Coelho <coelho@ti.com> Signed-off-by:
-
Pontus Fuchs authored
commit 2131d3c2 upstream. Check for out of bound FEM index to prevent reading beyond ini memory end. Signed-off-by:
-
Benjamin Herrenschmidt authored
commit c055fe07 upstream. We used to try to request 8 times more vram than needed, which would fail if the card has a too small BAR (observed with qemu & kvm). Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 1bb0b7d2 upstream. When using a >8bpp framebuffer, offb advertises truecolor, not directcolor, and doesn't touch the color map even if it has a corresponding access method for the real hardware. Thus it needs to set the pseudo-palette with all 3 components of the color, like other truecolor framebuffers, not with copies of the color index like a directcolor framebuffer would do. This went unnoticed for a long time because it's pretty hard to get offb to kick in with anything but 8bpp (old BootX under MacOS will do that and qemu does it). Signed-off-by:
-
Larry Finger authored
commit 3f81f8f1 upstream. Testing on the openSUSE wireless forum has shown that a Linksys WUSB54GC v3 with USB ID 1737:0077 works with rt2800usb when the ID is written to /sys/.../new_id. This ID can therefore be moved out of UNKNOWN. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Neil Horman authored
commit eea915bb upstream. This oops was reported recently: firmware_loading_store+0xf9/0x17b dev_attr_store+0x20/0x22 sysfs_write_file+0x101/0x134 vfs_write+0xac/0xf3 sys_write+0x4a/0x6e system_call_fastpath+0x16/0x1b The complete backtrace was unfortunately not captured, but details can be found here: https://bugzilla.redhat.com/show_bug.cgi?id=769920 The cause is fairly clear. Its caused by the fact that firmware_loading_store has a case 0 in its switch statement that reads and writes the fw_priv->fw poniter without the protection of the fw_lock mutex. since there is a window between the time that _request_firmware sets fw_priv->fw to NULL and the time the corresponding sysfs file is unregistered, its possible for a user space application to race in, and write a zero to the loading file, causing a NULL dereference in firmware_loading_store. Fix it by extending the protection of the fw_lock mutex to cover all of the firware_loading_store function. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Joe Perches authored
commit 2eb7f204 upstream. The Japanese/Korean/Chinese versions still need updating. Also, the stable kernel 2.6.x.y descriptions are out of date and should be updated as well. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
commit bc7a2f3a upstream. The old address hasn't worked since the great intrusion of August 2011. Signed-off-by:
-
- 06 Jan, 2012 17 commits
-
-
Greg Kroah-Hartman authored
-
Mohammed Shafi Shajakhan authored
commit b25bfda3 upstream. don't do aggregation related stuff for 'AP mode client power save handling' if aggregation is not enabled in the driver, otherwise it will lead to panic because those data structures won't be never intialized in 'ath_tx_node_init' if aggregation is disabled EIP is at ath_tx_aggr_wakeup+0x37/0x80 [ath9k] EAX: e8c09a20 EBX: f2a304e8 ECX: 00000001 EDX: 00000000 ESI: e8c085e0 EDI: f2a304ac EBP: f40e1ca4 ESP: f40e1c8c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper/1 (pid: 0, ti=f40e0000 task=f408e860 task.ti=f40dc000) Stack: 0001e966 e8c09a20 00000000 f2a304ac e8c085e0 f2a304ac f40e1cb0 f8186741 f8186700 f40e1d2c f922988d f2a304ac 00000202 00000001 c0b4ba43 00000000 0000000f e8eb75c0 e8c085e0 205b0001 34383220 f2a304ac f2a30000 00010020 Call Trace: [<f8186741>] ath9k_sta_notify+0x41/0x50 [ath9k] [<f8186700>] ? ath9k_get_survey+0x110/0x110 [ath9k] [<f922988d>] ieee80211_sta_ps_deliver_wakeup+0x9d/0x350 [mac80211] [<c018dc75>] ? __module_address+0x95/0xb0 [<f92465b3>] ap_sta_ps_end+0x63/0xa0 [mac80211] [<f9246746>] ieee80211_rx_h_sta_process+0x156/0x2b0 [mac80211] [<f9247d1e>] ieee80211_rx_handlers+0xce/0x510 [mac80211] [<c018440b>] ? trace_hardirqs_on+0xb/0x10 [<c056936e>] ? skb_queue_tail+0x3e/0x50 [<f9248271>] ieee80211_prepare_and_rx_handle+0x111/0x750 [mac80211] [<f9248bf9>] ieee80211_rx+0x349/0xb20 [mac80211] [<f9248949>] ? ieee80211_rx+0x99/0xb20 [mac80211] [<f818b0b8>] ath_rx_tasklet+0x818/0x1d00 [ath9k] [<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k] [<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k] [<f8187b33>] ath9k_tasklet+0xf3/0x1c0 [ath9k] [<c0151b7e>] tasklet_action+0xbe/0x180 Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Reported-by:
Ashwin Mendonca <ashwinloyal@gmail.com> Tested-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
-
Oleg Nesterov authored
commit 50b8d257 upstream. Test-case: int main(void) { int pid, status; pid = fork(); if (!pid) { for (;;) { if (!fork()) return 0; if (waitpid(-1, &status, 0) < 0) { printf("ERR!! wait: %m\n"); return 0; } } } assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0); assert(waitpid(-1, NULL, 0) == pid); assert(ptrace(PTRACE_SETOPTIONS, pid, 0, PTRACE_O_TRACEFORK) == 0); do { ptrace(PTRACE_CONT, pid, 0, 0); pid = waitpid(-1, NULL, 0); } while (pid > 0); return 1; } It fails because ->real_parent sees its child in EXIT_DEAD state while the tracer is going to change the state back to EXIT_ZOMBIE in wait_task_zombie(). The offending commit is 823b018e which moved the EXIT_DEAD check, but in fact we should not blame it. The original code was not correct as well because it didn't take ptrace_reparented() into account and because we can't really trust ->ptrace. This patch adds the additional check to close this particular race but it doesn't solve the whole problem. We simply can't rely on ->ptrace in this case, it can be cleared if the tracer is multithreaded by the exiting ->parent. I think we should kill EXIT_DEAD altogether, we should always remove the soon-to-be-reaped child from ->children or at least we should never do the DEAD->ZOMBIE transition. But this is too complex for 3.2. Reported-and-tested-by:
Denys Vlasenko <vda.linux@googlemail.com> Tested-by:
Lukasz Michalik <lmi@ift.uni.wroc.pl> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Linus Torvalds authored
commit 157e8bf8 upstream. This reverts commit c0afabd3. It causes failures on Toshiba laptops - instead of disabling the alarm, it actually seems to enable it on the affected laptops, resulting in (for example) the laptop powering on automatically five minutes after shutdown. There's a patch for it that appears to work for at least some people, but it's too late to play around with this, so revert for now and try again in the next merge window. See for example http://bugs.debian.org/652869 Reported-and-bisected-by: Andreas Friedrich <afrie@gmx.net> (Toshiba Tecra) Reported-by: Antonio-M. Corbi Bellot <antonio.corbi@ua.es> (Toshiba Portege R500) Reported-by: Marco Santos <marco.santos@waynext.com> (Toshiba Portege Z830) Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> (Toshiba Portege R830) Cc: Jonathan Nieder <jrnieder@gmail.com> Requested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Mandeep Singh Baines authored
commit f9fab10b upstream. vfork parent uninterruptibly and unkillably waits for its child to exec/exit. This wait is of unbounded length. Ignore such waits in the hung_task detector. Signed-off-by:
Mandeep Singh Baines <msb@chromium.org> Reported-by:
Sasha Levin <levinsasha928@gmail.com> LKML-Reference: <1325344394.28904.43.camel@lappy> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Kacur <jkacur@redhat.com> Signed-off-by:
-
Alexander Müller authored
commit 4376eee9 upstream. If we end up with no power states, don't look up current vddc. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44130 agd5f: fix patch formatting Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
Commit be4f1ac8 upstream. Since Linux 2.6.36 the writeback code has introduces various measures for live lock prevention during sync(). Unfortunately some of these are actively harmful for the XFS model, where the inode gets marked dirty for metadata from the data I/O handler. The older_than_this checks that are now more strictly enforced since writeback: avoid livelocking WB_SYNC_ALL writeback by only calling into __writeback_inodes_sb and thus only sampling the current cut off time once. But on a slow enough devices the previous asynchronous sync pass might not have fully completed yet, and thus XFS might mark metadata dirty only after that sampling of the cut off time for the blocking pass already happened. I have not myself reproduced this myself on a real system, but by introducing artificial delay into the XFS I/O completion workqueues it can be reproduced easily. Fix this by iterating over all XFS inodes in ->sync_fs and log all that are dirty. This might log inode that only got redirtied after the previous pass, but given how cheap delayed logging of inodes is it isn't a major concern for performance. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Tested-by:
Mark Tinguely <tinguely@sgi.com> Reviewed-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
-
Christoph Hellwig authored
Commit 0b8fd303 upstream. If the writeback code writes back an inode because it has expired we currently use the non-blockin ->write_inode path. This means any inode that is pinned is skipped. With delayed logging and a workload that has very little log traffic otherwise it is very likely that an inode that gets constantly written to is always pinned, and thus we keep refusing to write it. The VM writeback code at that point redirties it and doesn't try to write it again for another 30 seconds. This means under certain scenarious time based metadata writeback never happens. Fix this by calling into xfs_log_inode for kupdate in addition to data integrity syncs, and thus transfer the inode to the log ASAP. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 63a74175 upstream. This fixes an odd bug found on a Dell PowerEdge 1850/0RC130 (BIOS A05 01/09/2006) where all of the modules doing pci_set_dma_mask would fail with: ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: can't derive routing for PCI INT A ata_piix 0000:00:1f.1: BMDMA: failed to set dma mask, falling back to PIO The issue was the Xen-SWIOTLB was allocated such as that the end of buffer was stradling a page (and also above 4GB). The fix was spotted by Kalev Leonid which was to piggyback on git commit e79f86b2 "swiotlb: Use page alignment for early buffer allocation" which: We could call free_bootmem_late() if swiotlb is not used, and it will shrink to page alignment. So alloc them with page alignment at first, to avoid lose two pages And doing that fixes the outstanding issue. Suggested-by:
"Kalev, Leonid" <Leonid.Kalev@ca.com> Reported-and-Tested-by:
"Taylor, Neal E" <Neal.Taylor@ca.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Kyle Manna authored
commit 3d6271f9 upstream. Without turning the MADC clock on, no MADC conversions occur. $ cat /sys/class/hwmon/hwmon0/device/in8_input [ 53.428436] twl4030_madc twl4030_madc: conversion timeout! cat: read error: Resource temporarily unavailable Signed-off-by:
Kyle Manna <kyle@kylemanna.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Kyle Manna authored
commit d0e84cae upstream. If the twl4030-madc device wasn't registered, and another device, such as twl4030-madc-hwmon, calls twl4030_madc_conversion() a NULL pointer is dereferenced. Signed-off-by:
-
Kyle Manna authored
commit 66cc5b8e upstream. Worst case this fixes the following error: [ 72.086212] (NULL device *): conversion timeout! Best case it prevents a crash Signed-off-by:
-
Sanjeev Premi authored
commit e178ccb3 upstream. A mutex is locked on entry into twl4030_madc_conversion(). Immediate return on some error conditions leaves the mutex locked. This patch ensures that mutex is always unlocked before leaving the function. Signed-off-by:
Sanjeev Premi <premi@ti.com> Cc: Keerthy <j-keerthy@ti.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 96f1f05a upstream. Since we configure all the queues as CHAINABLE, we need to update the byte count for all the queues, not only the AGGREGATABLE ones. Not doing so can confuse the SCD and make the fw assert. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Stephen Rothwell authored
[ Upstream commit b9eda06f ] Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
-
Eric Dumazet authored
[ Upstream commit 9f28a2fc ] Commit 2c8cec5c (ipv4: Cache learned PMTU information in inetpeer) removed IP route cache garbage collector a bit too soon, as this gc was responsible for expired routes cleanup, releasing their neighbour reference. As pointed out by Robert Gladewitz, recent kernels can fill and exhaust their neighbour cache. Reintroduce the garbage collection, since we'll have to wait our neighbour lookups become refcount-less to not depend on this stuff. Reported-by:
Robert Gladewitz <gladewitz@gmx.de> Signed-off-by:
-
Weiping Pan authored
[ Upstream commit d01ff0a0 ] After reset ipv4_devconf->data[IPV4_DEVCONF_ACCEPT_LOCAL] to 0, we should flush route cache, or it will continue receive packets with local source address, which should be dropped. Signed-off-by:
Weiping Pan <panweiping3@gmail.com> Signed-off-by:
-
