- 05 Jun, 2023 32 commits
-
-
Christoph Hellwig authored
Create a new block/early-lookup.c to keep the early block device lookup code instead of having this code sit with the early mount code. Signed-off-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230531125535.676098-16-hch@lst.deSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Instead of only clearing root_wait in devt_from_partuuid when the UUID format was invalid, do that in parse_root_device for all strings that failed to parse. Signed-off-by:
-
Christoph Hellwig authored
name_to_dev_t has a very misleading name, that doesn't make clear it should only be used by the early init code, and also has a bad calling convention that doesn't allow returning different kinds of errors. Rename it to early_lookup_bdev to make the use case clear, and return an errno, where -EINVAL means the string could not be parsed, and -ENODEV means it the string was valid, but there was no device found for it. Also stub out the whole call for !CONFIG_BLOCK as all the non-block root cases are always covered in the caller. Signed-off-by:
-
Christoph Hellwig authored
The nfs/cifs/ram special case only needs to be parsed once, and only in the boot code. Move them out of name_to_dev_t and into prepare_namespace. Signed-off-by:
-
Christoph Hellwig authored
The root_wait logic is a bit obsfucated right now. Expand it and move it into a helper. Signed-off-by:
-
Christoph Hellwig authored
Assign a Root_Generic magic value for UBI/MTD root and handle the root mounting in mount_root like all other root types. Besides making the code more clear this also means that UBI/MTD root can be used together with an initrd (not that anyone should care). Also factor parsing of the root name into a helper now that it can be easily done and will get more complicated with subsequent patches. Signed-off-by:
-
Christoph Hellwig authored
Remove the code that drops the /dev/ prefix from root_device_name, which is only used for error messages when mounting the root device fails. Signed-off-by:
-
Christoph Hellwig authored
Instead of declaring root_device_name as a global variable pass it as an argument to the functions using it. Signed-off-by:
-
Christoph Hellwig authored
Provide stubs for all the lower level mount helpers, and just switch on ROOT_DEV in the main function. Signed-off-by:
-
Christoph Hellwig authored
mount_block_root is also used to mount non-block file systems, so give it a better name. Signed-off-by:
-
Christoph Hellwig authored
Remove all unused defines, and just use the expanded versions for the SCSI disk majors. I've decided to keep Root_RAM0 even if it could be expanded as there is a lot of special casing for it in the init code. Signed-off-by:
-
Christoph Hellwig authored
software_resume can be called either from an init call in the boot code, or from sysfs once the system has finished booting, and the two invocation methods this can't race with each other. For the latter case we did just parse the suspend device manually, while the former might not have one. Split software_resume so that the search only happens for the boot case, which also means the special lockdep nesting annotation can go away as the system transition mutex can be taken a little later and doesn't have the sysfs locking nest inside it. Signed-off-by:
Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230531125535.676098-5-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Passing call dependent variable in global variables is a huge antipattern. Fix it up. Signed-off-by:
-
Christoph Hellwig authored
Split the logic to find the resume device out software_resume and into a separate helper to start unwindig the convoluted goto logic. Signed-off-by:
-
Christoph Hellwig authored
bool is the most sensible return value for a yes/no return. Also add __init as this funtion is only called from the early boot code. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230531125535.676098-2-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Implement a set of holder_ops that shut down the file system when the block device used as log device is removed undeneath the file system. Signed-off-by:
Jan Kara <jack@suse.cz> Acked-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
Wire up the shutdown method to shut down the file system when the underlying block device is marked dead. Signed-off-by:
-
Christoph Hellwig authored
Split ext4_shutdown into a low-level helper that will be reused for implementing the shutdown super operation and a wrapper for the ioctl handling. Signed-off-by:
-
Christoph Hellwig authored
Implement a set of holder_ops that shut down the file system when the block device used as log or RT device is removed undeneath the file system. Signed-off-by:
Darrick J. Wong <djwong@kernel.org> Acked-by:
-
Christoph Hellwig authored
Wire up the shutdown method to shut down the file system when the underlying block device is marked dead. Add a new message to clearly distinguish this shutdown reason from other shutdowns. Signed-off-by:
-
Christoph Hellwig authored
Add a new ->shutdown super operation that can be used to tell the file system to shut down, and call it from newly created holder ops when the block device under a file system shuts down. This only covers the main block device for "simple" file systems using get_tree_bdev / mount_bdev. File systems their own get_tree method or opening additional devices will need to set up their own blk_holder_ops. Signed-off-by:
Christian Brauner <brauner@kernel.org> Reviewed-by:
-
Christoph Hellwig authored
Add a mark_dead method to blk_holder_ops that is called from blk_mark_disk_dead to notify the holder that the block device it is using has been marked dead. Signed-off-by:
-
Christoph Hellwig authored
Add a new blk_holder_ops structure, which is passed to blkdev_get_by_* and installed in the block_device for exclusive claims. It will be used to allow the block layer to call back into the user of the block device for thing like notification of a removed device or a device resize. Signed-off-by:
-
Christoph Hellwig authored
There is only a single caller left, so fold the loop into that. Signed-off-by:
-
Christoph Hellwig authored
Delay dropping the block_devices for partitions in del_gendisk until after the call to blk_mark_disk_dead, so that we can implementat notification of removed devices in blk_mark_disk_dead. This requires splitting a lower-level drop_partition helper out of delete_partition and using that from del_gendisk, while having a common loop for the whole device and partitions that calls remove_inode_hash, fsync_bdev and __invalidate_device before the call to blk_mark_disk_dead. Signed-off-by:
-
Christoph Hellwig authored
Move the call to remove_inode_hash to the beginning of delete_partition, as we want to prevent opening a block_device that is about to be removed ASAP. Signed-off-by:
-
Christoph Hellwig authored
Check if GD_DEAD is already set in blk_mark_disk_dead, and don't duplicate the work already done. Signed-off-by:
-
Christoph Hellwig authored
blk_mark_disk_dead does very similar work a a section of del_gendisk: - set the GD_DEAD flag - set the capacity to zero - start a queue drain but del_gendisk also sets QUEUE_FLAG_DYING on the queue if it is owned by the disk, sets the capacity to zero before starting the drain, and both with sending a uevent and kernel message for this fake capacity change. Move the exact logic from the more heavily used del_gendisk into blk_mark_disk_dead and then call blk_mark_disk_dead from del_gendisk. Signed-off-by:
-
Christoph Hellwig authored
There is no reason for this lock to spin, and being able to sleep under it will come in handy soon. Signed-off-by:
-
Christoph Hellwig authored
The long if/else chain obsfucates the actual logic. Tidy it up to be more structured. Also drop the whole argument, as it can be trivially derived from bdev using bdev_whole, and having the bdev_whole in the function makes it easier to follow. Signed-off-by:
-
Christoph Hellwig authored
Move all the logic to release an exclusive claim into a helper. Signed-off-by:
-
Christoph Hellwig authored
__KERNEL_SYSCALLS__ hasn't been needed since Linux 2.6.19 so stop defining it. Signed-off-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230601151646.1386867-1-hch@lst.deSigned-off-by:
-
- 04 Jun, 2023 1 commit
-
-
Ming Lei authored
Add control command of UBLK_U_CMD_GET_FEATURES for returning driver's feature set or capability. This way can simplify userspace for maintaining compatibility because userspace doesn't need to send command to one device for querying driver feature set any more. Such as, with the queried feature set, userspace can choose to use: - UBLK_CMD_GET_DEV_INFO2 or UBLK_CMD_GET_DEV_INFO, - UBLK_U_CMD_* or UBLK_CMD_* Userspace code: https://github.com/ming1/ubdsrv/commits/features-cmdSigned-off-by:
Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230603040601.775227-1-ming.lei@redhat.comSigned-off-by:
-
- 01 Jun, 2023 7 commits
-
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230530155608.272266-1-azeemshaikh38@gmail.comSigned-off-by:
-
Yu Kuai authored
Currently, icq is tracked by both request_queue(icq->q_node) and task(icq->ioc_node), and ioc_clear_queue() from elevator exit is not safe because it can access the list without protection: ioc_clear_queue ioc_release_fn lock queue_lock list_splice /* move queue list to a local list */ unlock queue_lock /* * lock is released, the local list * can be accessed through task exit. */ lock ioc->lock while (!hlist_empty) icq = hlist_entry lock queue_lock ioc_destroy_icq delete icq->ioc_node while (!list_empty) icq = list_entry() list_del icq->q_node /* * This is not protected by any lock, * list_entry concurrent with list_del * is not safe. */ unlock queue_lock unlock ioc->lock Fix this problem by protecting list 'icq->q_node' by queue_lock from ioc_clear_queue(). Reported-and-tested-by:
Pradeep Pragallapati <quic_pragalla@quicinc.com> Link: https://lore.kernel.org/lkml/20230517084434.18932-1-quic_pragalla@quicinc.com/Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
-
Johannes Thumshirn authored
Now that all callers of bio_add_folio() check the return value, mark it as __must_check. Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
-
Johannes Thumshirn authored
When the iomap buffered-io code can't add a folio to a bio, it allocates a new bio and adds the folio to that one. This is done using bio_add_folio(), but doesn't check for errors. As adding a folio to a newly created bio can't fail, use the newly introduced bio_add_folio_nofail() function. Reviewed-by:
-
Johannes Thumshirn authored
Just like for bio_add_pages() add a no-fail variant for bio_add_folio(). Reviewed-by:
-
Johannes Thumshirn authored
Now that all users of bio_add_page check for the return value, mark bio_add_page as __must_check. Reviewed-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
-
Johannes Thumshirn authored
crypt_alloc_buffer() already allocates enough entries in the clone bio's vector, so adding a page to the bio can't fail. Use __bio_add_page() to reflect this. Signed-off-by:
-
