Skip to content

L
linux
Switch branch/tag
  1. 24 May, 2016 4 commits
    • Stefano Stabellini's avatar
      xen/x86: actually allocate legacy interrupts on PV guests · 702f9260
      Stefano Stabellini authored 
      b4ff8389 is incomplete: relies on nr_legacy_irqs() to get the number
of legacy interrupts when actually nr_legacy_irqs() returns 0 after
probe_8259A(). Use NR_IRQS_LEGACY instead.
Signed-off-by: default avatarStefano Stabellini <sstabellini@kernel.org>
CC: stable@vger.kernel.org
      702f9260
    • Arnd Bergmann's avatar
      Xen: don't warn about 2-byte wchar_t in efi · 971a69db
      Arnd Bergmann authored 
      The XEN UEFI code has become available on the ARM architecture
recently, but now causes a link-time warning:

ld: warning: drivers/xen/efi.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail

This seems harmless, because the efi code only uses 2-byte
characters when interacting with EFI, so we don't pass on those
strings to elsewhere in the system, and we just need to
silence the warning.

It is not clear to me whether we actually need to build the file
with the -fshort-wchar flag, but if we do, then we should also
pass --no-wchar-size-warning to the linker, to avoid the warning.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Reviewed-by: default avatarStefano Stabellini <sstabellini@kernel.org>
Fixes: 37060935dc04 ("ARM64: XEN: Add a function to initialize Xen specific UEFI runtime services")
      971a69db
    • David Vrabel's avatar
      xen/gntdev: reduce copy batch size to 16 · 36ae220a
      David Vrabel authored 
      IOCTL_GNTDEV_GRANT_COPY batches copy operations to reduce the number
of hypercalls.  The stack is used to avoid a memory allocation in a
hot path. However, a batch size of 24 requires more than 1024 bytes of
stack which in some configurations causes a compiler warning.

    xen/gntdev.c: In function ‘gntdev_ioctl_grant_copy’:
    xen/gntdev.c:949:1: warning: the frame size of 1248 bytes is
    larger than 1024 bytes [-Wframe-larger-than=]

This is a harmless warning as there is still plenty of stack spare,
but people keep trying to "fix" it.  Reduce the batch size to 16 to
reduce stack usage to less than 1024 bytes.  This should have minimal
impact on performance.
Signed-off-by: default avatarDavid Vrabel <david.vrabel@citrix.com>
      36ae220a
    • Stefano Stabellini's avatar
      xen/x86: don't lose event interrupts · c06b6d70
      Stefano Stabellini authored 
      On slow platforms with unreliable TSC, such as QEMU emulated machines,
it is possible for the kernel to request the next event in the past. In
that case, in the current implementation of xen_vcpuop_clockevent, we
simply return -ETIME. To be precise the Xen returns -ETIME and we pass
it on. However the result of this is a missed event, which simply causes
the kernel to hang.

Instead it is better to always ask the hypervisor for a timer event,
even if the timeout is in the past. That way there are no lost
interrupts and the kernel survives. To do that, remove the
VCPU_SSHOTTMR_future flag.
Signed-off-by: default avatarStefano Stabellini <sstabellini@kernel.org>
Acked-by: default avatarJuergen Gross <jgross@suse.com>
      c06b6d70
  3. 18 Apr, 2016 1 commit
  5. 17 Apr, 2016 5 commits
  7. 16 Apr, 2016 7 commits
  9. 15 Apr, 2016 17 commits
  11. 14 Apr, 2016 6 commits
    • Mike Snitzer's avatar
      dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros · 9567366f
      Mike Snitzer authored 
      The READ_LOCK macro was incorrectly returning -EINVAL if
dm_bm_is_read_only() was true -- it will always be true once the cache
metadata transitions to read-only by dm_cache_metadata_set_read_only().

Wrap READ_LOCK and WRITE_LOCK multi-statement macros in do {} while(0).
Also, all accesses of the 'cmd' argument passed to these related macros
are now encapsulated in parenthesis.

A follow-up patch can be developed to eliminate the use of macros in
favor of pure C code.  Avoiding that now given that this needs to apply
to stable@.
Reported-by: default avatarBen Hutchings <ben@decadent.org.uk>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Fixes: d14fcf3d ("dm cache: make sure every metadata function checks fail_io")
Cc: stable@vger.kernel.org
      9567366f
    • Keith Busch's avatar
      NVMe: Always use MSI/MSI-x interrupts · a5229050
      Keith Busch authored 
      Multiple users have reported device initialization failure due the driver
not receiving legacy PCI interrupts. This is not unique to any particular
controller, but has been observed on multiple platforms.

There have been no issues reported or observed when with message signaled
interrupts, so this patch attempts to use MSI-x during initialization,
falling back to MSI. If that fails, legacy would become the default.

The setup_io_queues error handling had to change as a result: the admin
queue's msix_entry used to be initialized to the legacy IRQ. The case
where nr_io_queues is 0 would fail request_irq when setting up the admin
queue's interrupt since re-enabling MSI-x fails with 0 vectors, leaving
the admin queue's msix_entry invalid. Instead, return success immediately.
Reported-by: default avatarTim Muhlemmer <muhlemmer@gmail.com>
Reported-by: default avatarJon Derrick <jonathan.derrick@intel.com>
Signed-off-by: default avatarKeith Busch <keith.busch@intel.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      a5229050
    • Linus Torvalds's avatar
      /proc/iomem: only expose physical resource addresses to privileged users · 51d7b120
      Linus Torvalds authored 
      In commit c4004b02 ("x86: remove the kernel code/data/bss resources
from /proc/iomem") I was hoping to remove the phyiscal kernel address
data from /proc/iomem entirely, but that had to be reverted because some
system programs actually use it.

This limits all the detailed resource information to properly
credentialed users instead.
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      51d7b120
    • Linus Torvalds's avatar
      pci-sysfs: use proper file capability helper function · ab0fa82b
      Linus Torvalds authored 
      The PCI config access checked the file capabilities correctly, but used
the itnernal security capability check rather than the helper function
that is actually meant for that.

The security_capable() has unusual return values and is not meant to be
used elsewhere (the only other use is in the capability checking
functions that we actually intend people to use, and this odd PCI usage
really stood out when looking around the capability code.
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ab0fa82b
    • Linus Torvalds's avatar
      Make file credentials available to the seqfile interfaces · 34dbbcdb
      Linus Torvalds authored 
      A lot of seqfile users seem to be using things like %pK that uses the
credentials of the current process, but that is actually completely
wrong for filesystem interfaces.

The unix semantics for permission checking files is to check permissions
at _open_ time, not at read or write time, and that is not just a small
detail: passing off stdin/stdout/stderr to a suid application and making
the actual IO happen in privileged context is a classic exploit
technique.

So if we want to be able to look at permissions at read time, we need to
use the file open credentials, not the current ones.  Normal file
accesses can just use "f_cred" (or any of the helper functions that do
that, like file_ns_capable()), but the seqfile interfaces do not have
any such options.

It turns out that seq_file _does_ save away the user_ns information of
the file, though.  Since user_ns is just part of the full credential
information, replace that special case with saving off the cred pointer
instead, and suddenly seq_file has all the permission information it
needs.
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      34dbbcdb
    • Linus Torvalds's avatar
      Revert "x86: remove the kernel code/data/bss resources from /proc/iomem" · 4046d6e8
      Linus Torvalds authored 
      This reverts commit c4004b02.

Sadly, my hope that nobody would actually use the special kernel entries
in /proc/iomem were dashed by kexec.  Which reads /proc/iomem explicitly
to find the kernel base address.  Nasty.

Anyway, that means we can't do the sane and simple thing and just remove
the entries, and we'll instead have to mask them out based on permissions.
Reported-by: default avatarZhengyu Zhang <zhezhang@redhat.com>
Reported-by: default avatarDave Young <dyoung@redhat.com>
Reported-by: default avatarFreeman Zhang <freeman.zhang1992@gmail.com>
Reported-by: default avatarEmrah Demir <ed@abdsec.com>
Reported-by: default avatarBaoquan He <bhe@redhat.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4046d6e8
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7