- 18 Apr, 2023 33 commits
-
-
Michael Mityushkin authored
[Why] Doing core_link_disable_stream or set_dpms_off when reinitializing hardware causes issue to repro with external display connected. This is unnecessary, blanking pixel data should be sufficient. [How] Call disable_pixel_data while reinitializing hardware instead of core_link_disable_stream or set_dpms_off. Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Michael Mityushkin <michael.mityushkin@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Nasir Osman authored
[why] When we force ODM combine with DSC, we lose several 8 bit and 10 bit modes in validation and thus not able to use HDR. This is due to the number of horizontal slices used in DSC not properly being accounted for currently when 2:1 ODM Combine is forced. [how] Enforce at least two horizontal slices are used for DSC when ODM combine is forced. Reviewed-by:
Nasir Osman <nasir.osman@amd.com> Tested-by:
-
Iswara Nagulendran authored
[HOW&WHY] Write DPCD 721 bit 7 to high, and the appropriate luminance level to DPCD 734-736 if bit 4 from DPCD register 734 is high, indicating that the panel luminance control is enabled from the panel side. Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Iswara Nagulendran <Iswara.Nagulendran@amd.com> Tested-by:
-
Rodrigo Siqueira authored
To ensure that FAMS can be used, DC must check if there is VRR support. This commit adds the required configuration to ensure FAMS can be executed in the target system. Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by:
-
Hersen Wu authored
[Why] hdcp are enabled for asics from raven. for old asics which hdcp are not enabled, hdcp_workqueue are null. some access to hdcp work queue are not guarded with pointer check. [How] add hdcp_workqueue pointer check before access workqueue. Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by:
Hersen Wu <hersenxs.wu@amd.com> Tested-by:
-
Josip Pavic authored
[Why & How] If dmub command queuing fails due to the inbox being full, flush the inbox and resubmit the comamnd. This was previously the default behavior but was lost in a refactor. Reviewed-by:
Josip Pavic <Josip.Pavic@amd.com> Tested-by:
-
Josip Pavic authored
[Why & How] Consolidate dmub access to a single interface. This makes it easier to add code in the future that needs to run every time a dmub command is requested (e.g. instrumentation, locking etc). Reviewed-by:
-
Alvin Lee authored
[Description] - Having excessively large margin causes failure in the static schedulability check in some cases for SubVP + DRR - 100us of DRR margin is sufficient based on a weeks worth of stress testing on different display configs Reviewed-by:
Michael Strauss <Michael.Strauss@amd.com> Acked-by:
-
Alvin Lee authored
[Description] - Previous bug fix for audio issue included dtbclk and p-state on the optimized boot path which is incorarect - We only care about DISPCLK in the optimized vs. non-optimized boot path to avoid audio issues Reviewed-by:
Saaem Rizvi <syedsaaem.rizvi@amd.com> Acked-by:
-
Dmytro Laktyushkin authored
Increse to 6 as that is the max surfaces supported asics can have. The is no practical use case yet, but this is valuable for pre-si validation. Reviewed-by:
Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by:
-
Hersen Wu authored
[Why] when amdgpu_dm_update_connector_after_detect is called two times successively with valid sink, memory allocated of aconnector->timing_requested for the first call is not free. this causes memeleak. [How] allocate memory only when aconnector->timing_requested is null. Reviewed-by:
-
Aurabindo Pillai authored
[Why&How] When skipping full modeset since the only state change was a front porch change, the DC commit sequence requires extra checks to handle non existant plane states being asked to be removed from context. Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Alan Liu authored
[Why] Currently we don't check if secure display is enabled before we send command to disable secure display in dmub. It will accidentally cause some other igt tests to fail, eg, crtc-linear-degamma. [How] Refactor the code we reset the secure display state to check secure display was enabled or not before stopping it in dmub. Reviewed-by:
Wayne Lin <Wayne.Lin@amd.com> Acked-by:
Alan Liu <HaoPing.Liu@amd.com> Tested-by:
-
Alex Hung authored
[Why] When IGT's kms_hdmi_inject forces EDID for HDMI audio, dc rejects the request because virtual signal is not in dc_is_audio_capable_signal function. [How] Includes SIGNAL_TYPE_VIRTUAL as audio capable. Reviewed-by:
Chao-kai Wang <Stylon.Wang@amd.com> Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Wenchieh Chien <wenchieh.chien@amd.com> Tested-by:
-
Josip Pavic authored
[Why & How] Add code path to copy dmub caps to dc, which is missing on dcn31 Acked-by:
-
Rodrigo Siqueira authored
When the commit fff7eb56 ("drm/amd/display: Don't set dram clock change requirement for SubVP") was merged, we missed some parts associated with the MCLK switch. This commit adds all the missing parts. Fixes: fff7eb56 ("drm/amd/display: Don't set dram clock change requirement for SubVP") Reviewed-by:
-
Wesley Chalmers authored
[WHY] It is possible to commit state multiple times in rapid succession with FAMS enabled; if each of these commits were to set optimized_required, then the user may see latency. [HOW] fw_based_mclk_switching is currently not used in dc->clk_mgr; use it to track whether the current state has FAMS enabled; if it has, then do not disable FAMS in prepare_bandwidth, and do not set optimized_required. Reviewed-by:
Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by:
-
Wesley Chalmers authored
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. [HOW] Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets optimized_required. This change expects that Freesync requests are blocked when optimized_required is true. Reviewed-by:
-
Leon Huang authored
[Why] set ABM pipe/backlight gets some issues when abm callback func pointers are NULL. For some usecase, driver would like to control PWM level before ABM resource is ready. However, recent flow refactor of ABM didn't consider that use case. [How] Rollback flow that sending inbox command to dmub directly when ABM function pointers aren't ready. Reviewed-by:
Leon Huang <Leon.Huang1@amd.com> Tested-by:
-
Srinivasan Shanmugam authored
After reading from receiver via DPCD, check & log if it supports MST, DSC & FEC Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
-
Srinivasan Shanmugam authored
The previous 'commit ca9beb8a ("drm/amd/display: Add logging when setting DP sink power state fails")', it is better to unconditionally print "failed to power up sink", because we are returning DC_ERROR_UNEXPECTED. Fixes: ca9beb8a ("drm/amd/display: Add logging when setting DP sink power state fails") Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by:
-
Leon Huang authored
[Why] Refactor ABM feature and implement inbox command for DMUB. [How] Implement the ioctl to send inbox command to DMUB. Reviewed-by:
-
Tom Rix authored
smatch reports drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:277:6: warning: symbol 'dccg314_init' was not declared. Should it be static? This variable is only used in one file so should be static. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
Reviewed-by:
-
Rodrigo Siqueira authored
Reviewed-by:
-
Rodrigo Siqueira authored
Reviewed-by:
-
Rodrigo Siqueira authored
Reviewed-by:
-
Rodrigo Siqueira authored
This commit replaces spaces with tabs in multiple functions and adjusts the indentation in some other parts of the code to improve readability. Reviewed-by:
-
Rodrigo Siqueira authored
When using FPO, there is some misconfiguration that happens for the lack of configuration of the MCLK switch in some circumstances. This commit adds the required field update when using the MCLK switch. Reviewed-by:
-
Rodrigo Siqueira authored
All clock values came from firmware, but bounding box values can be helpful in some debug situations. This commit updates some of the values associated with clock speed and memory channels. Reviewed-by:
-
Chong Li authored
[WHY] Function "amdgpu_irq_update()" called by "amdgpu_device_ip_late_init()" is an atomic context. We shouldn't access registers through KIQ since "msleep()" may be called in "amdgpu_kiq_rreg()". [HOW] Move function "amdgpu_virt_release_full_gpu()" after function "amdgpu_device_ip_late_init()", to ensure that registers be accessed through RLCG instead of KIQ. Call Trace: <TASK> show_stack+0x52/0x69 dump_stack_lvl+0x49/0x6d dump_stack+0x10/0x18 __schedule_bug.cold+0x4f/0x6b __schedule+0x473/0x5d0 ? __wake_up_klogd.part.0+0x40/0x70 ? vprintk_emit+0xbe/0x1f0 schedule+0x68/0x110 schedule_timeout+0x87/0x160 ? timer_migration_handler+0xa0/0xa0 msleep+0x2d/0x50 amdgpu_kiq_rreg+0x18d/0x1f0 [amdgpu] amdgpu_device_rreg.part.0+0x59/0xd0 [amdgpu] amdgpu_device_rreg+0x3a/0x50 [amdgpu] amdgpu_sriov_rreg+0x3c/0xb0 [amdgpu] gfx_v10_0_set_gfx_eop_interrupt_state.constprop.0+0x16c/0x190 [amdgpu] gfx_v10_0_set_eop_interrupt_state+0xa5/0xb0 [amdgpu] amdgpu_irq_update+0x53/0x80 [amdgpu] amdgpu_irq_get+0x7c/0xb0 [amdgpu] amdgpu_fence_driver_hw_init+0x58/0x90 [amdgpu] amdgpu_device_init.cold+0x16b7/0x2022 [amdgpu] Signed-off-by:
Chong Li <chongli2@amd.com> Reviewed-by: JingWen.Chen2@amd.com Signed-off-by:
-
Tom Rix authored
gcc with W=1 reports In file included from drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c:36: ./drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v13_0.h:66:18: error: ‘pmfw_decoded_link_width’ defined but not used [-Werror=unused-const-variable=] 66 | static const int pmfw_decoded_link_width[7] = {0, 1, 2, 4, 8, 12, 16}; | ^~~~~~~~~~~~~~~~~~~~~~~ ./drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v13_0.h:65:18: error: ‘pmfw_decoded_link_speed’ defined but not used [-Werror=unused-const-variable=] 65 | static const int pmfw_decoded_link_speed[5] = {1, 2, 3, 4, 5}; | ^~~~~~~~~~~~~~~~~~~~~~~ These variables are defined and used in smu_v13_0_7_ppt.c and smu_v13_0_0_ppt.c. There should be only one definition. So define the variables as globals in smu_v13_0.c Signed-off-by: -
Jane Jian authored
add jpeg table size to ctx table size rather than override it Signed-off-by:
Jane Jian <Jane.Jian@amd.com> Reviewed-by:
JingWen Chen <JingWen.Chen2@amd.com> Signed-off-by:
-
- 17 Apr, 2023 1 commit
-
-
https://gitlab.freedesktop.org/agd5f/linuxDave Airlie authored
amd-drm-next-6.4-2023-04-14: amdgpu: - S4 fixes for APUs - GFX11 fixes - Misc code cleanups - DCN 3.2 fixes - DCN 3.1.4 fixes - FPO/FAMS work to improve display power savings - DP fixes - UMC 8.10 code cleanup - SDMA v4 fix - GPU clock counter fixes - SMU 13 fixes - Sdma v6 invalidation fix for preemption - RAS fixes - S0ix fix - GC 9.4.3 updates amdkfd: - Fix user pointers with IOMMU - Fix coherency flag handling Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230414204609.7942-1-alexander.deucher@amd.com
-
- 14 Apr, 2023 6 commits
-
-
Le Ma authored
Add some basic definitions and structure member. Inscrease MAX_WB slots to 1024 to support the increasing number of rings for multiple partitions. v2: unify naming style Signed-off-by:
Le Ma <le.ma@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Le Ma authored
It looks better to place this field in ring structure. Also drop the repeated ring funcs definitions if there's no difference except for vmhub field. v2: rename the field to vm_hub like others (Le) v3: apply the changes to new ip blocks (Hawking) v4: fix vcn sw ring (Alex) Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Jane Jian authored
This reverts commit fe120b9f. This patch impacts sriov multi-vf stability Signed-off-by:
-
Hawking Zhang authored
Add common IP handling for GC 9.4.3 Signed-off-by:
-
Srinivasan Shanmugam authored
Log when Clock recovery is successful, as part of DP link training process. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by:
-
Hawking Zhang authored
init asic funcs and cp/pg flags for GC 9.4.3 Signed-off-by:
-
