- 06 Oct, 2020 33 commits
-
-
Srikar Dronamraju authored
All threads of a SMT4/SMT8 core can either be part of CPU's coregroup mask or outside the coregroup. Use this relation to reduce the number of iterations needed to find all the CPUs that share the same coregroup Use a temporary mask to iterate through the CPUs that may share coregroup mask. Also instead of setting one CPU at a time into cpu_coregroup_mask, copy the SMT4/SMT8/submask at one shot. Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200921095653.9701-12-srikar@linux.vnet.ibm.com
-
Srikar Dronamraju authored
Move the logic for updating the coregroup mask of a CPU to its own function. This will help in reworking the updation of coregroup mask in subsequent patch. Signed-off-by:
-
Srikar Dronamraju authored
All threads of a SMT4 core can either be part of this CPU's l2-cache mask or not related to this CPU l2-cache mask. Use this relation to reduce the number of iterations needed to find all the CPUs that share the same l2-cache. Use a temporary mask to iterate through the CPUs that may share l2_cache mask. Also instead of setting one CPU at a time into cpu_l2_cache_mask, copy the SMT4/sub mask at one shot. Signed-off-by:
-
Srikar Dronamraju authored
CACHE and COREGROUP domains are now part of default topology. However on systems that don't support CACHE or COREGROUP, these domains will eventually be degenerated. The degeneration happens per CPU. Do note the current fixup_topology() logic ensures that mask of a domain that is not supported on the current platform is set to the previous domain. Instead of waiting for the scheduler to degenerated try to consolidate based on their masks and sd_flags. This is done just before setting the scheduler topology. Signed-off-by:
-
Srikar Dronamraju authored
Currently on hotplug/hotunplug, CPU iterates through all the CPUs in its core to find threads in its thread group. However this info is already captured in cpu_l1_cache_map. Hence reduce iterations and cleanup add_cpu_to_smallcore_masks function. Signed-off-by:
Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by:
-
Srikar Dronamraju authored
update_mask_by_l2 is called only once. But it passes cpu_l2_cache_mask as parameter. Instead of passing cpu_l2_cache_mask, use it directly in update_mask_by_l2. Signed-off-by:
-
Srikar Dronamraju authored
All the arch specific topology cpumasks are within a node/DIE. However when setting these per CPU cpumasks, system traverses through all the online CPUs. This is redundant. Reduce the traversal to only CPUs that are online in the node to which the CPU belongs to. Signed-off-by:
-
Srikar Dronamraju authored
While offlining a CPU, system currently iterate through all the CPUs in the DIE to clear sibling, l2_cache and smallcore maps. However if there are more cores in a DIE, system can end up spending more time iterating through CPUs which are completely unrelated. Optimize this by only iterating through smaller but relevant cpumap. If shared_cache is set, cpu_l2_cache_map should be relevant else cpu_sibling_map would be relevant. Signed-off-by:
-
Srikar Dronamraju authored
Now that cpu_core_mask has been removed and topology_core_cpumask has been updated to use cpu_cpu_mask, we no more need get_physical_package_id. Signed-off-by:
-
Srikar Dronamraju authored
Anton Blanchard reported that his 4096 vcpu KVM guest took around 30 minutes to boot. He also analyzed it to the time taken to iterate while setting the cpu_core_mask. Further analysis shows that cpu_core_mask and cpu_cpu_mask for any CPU would be equal on Power. However updating cpu_core_mask took forever to update as its a per cpu cpumask variable. Instead cpu_cpu_mask was a per NODE /per DIE cpumask that was shared by all the respective CPUs. Also cpu_cpu_mask is needed from a scheduler perspective. However cpu_core_map is an exported symbol. Hence stop updating cpu_core_map and make it point to cpu_cpu_mask. Signed-off-by:
-
Srikar Dronamraju authored
On Power, cpu_core_mask and cpu_cpu_mask refer to the same set of CPUs. cpu_cpu_mask is needed by scheduler, hence look at deprecating cpu_core_mask. Before deleting the cpu_core_mask, ensure its only user is moved to cpu_cpu_mask. Signed-off-by:
-
Gustavo Romero authored
Althought AMR is stashed in the checkpoint area, currently we don't save it to the per thread checkpoint struct after a treclaim and so we don't restore it either from that struct when we trechkpt. As a consequence when the transaction is later rolled back the kernel space AMR value when the trechkpt was done appears in userspace. That commit saves and restores AMR accordingly on treclaim and trechkpt. Since AMR value is also used in kernel space in other functions, it also takes care of stashing kernel live AMR into the stack before treclaim and before trechkpt, restoring it later, just before returning from tm_reclaim and __tm_recheckpoint. Is also fixes two nonrelated comments about CR and MSR. Signed-off-by:
Gustavo Romero <gromero@linux.ibm.com> Tested-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Oliver O'Halloran authored
When support for EEH on PowerNV was added a lot of pseries specific code was made "generic" and some of the quirks of pseries EEH came along for the ride. One of the stranger quirks is eeh_pe containing two types of PE address: pe->addr and pe->config_addr. There reason for this appears to be historical baggage rather than any real requirements. On pseries EEH PEs are manipulated using RTAS calls. Each EEH RTAS call takes a "PE configuration address" as an input which is used to identify which EEH PE is being manipulated by the call. When initialising the EEH state for a device the first thing we need to do is determine the configuration address for the PE which contains the device so we can enable EEH on that PE. This process is outlined in PAPR which is the modern (i.e post-2003) FW specification for pseries. However, EEH support was first described in the pSeries RISC Platform Architecture (RPA) and although they are mostly compatible EEH is one of the areas where they are not. The major difference is that RPA doesn't actually have the concept of a PE. On RPA systems the EEH RTAS calls are done on a per-device basis using the same config_addr that would be passed to the RTAS functions to access PCI config space (e.g. ibm,read-pci-config). The config_addr is not identical since the function and config register offsets of the config_addr must be set to zero. EEH operations being done on a per-device basis doesn't make a whole lot of sense when you consider how EEH was implemented on legacy PCI systems. For legacy PCI(-X) systems EEH was implemented using special PCI-PCI bridges which contained logic to detect errors and freeze the secondary bus when one occurred. This means that the EEH enabled state is shared among all devices behind that EEH bridge. As a result there's no way to implement the per-device control required for the semantics specified by RPA. It can be made to work if we assume that a separate EEH bridge exists for each EEH capable PCI slot and there are no bridges behind those slots. However, RPA also specifies the ibm,configure-bridge RTAS call for re-initalising bridges behind EEH capable slots after they are reset due to an EEH event so that is probably not a valid assumption. This incoherence was fixed in later PAPR, which succeeded RPA. Unfortunately, since Linux EEH support seems to have been implemented based on the RPA spec some of the legacy assumptions were carried over (probably for POWER4 compatibility). The fix made in PAPR was the introduction of the "PE" concept and redefining the EEH RTAS calls (set-eeh-option, reset-slot, etc) to operate on a per-PE basis so all devices behind an EEH bride would share the same EEH state. The "config_addr" argument to the EEH RTAS calls became the "PE_config_addr" and the OS was required to use the ibm,get-config-addr-info RTAS call to find the correct PE address for the device. When support for the new interfaces was added to Linux it was implemented using something like: At probe time: pdn->eeh_config_addr = rtas_config_addr(pdn); pdn->eeh_pe_config_addr = rtas_get_config_addr_info(pdn); When performing an RTAS call: config_addr = pdn->eeh_config_addr; if (pdn->eeh_pe_config_addr) config_addr = pdn->eeh_pe_config_addr; rtas_call(..., config_addr, ...); In other words, if the ibm,get-config-addr-info RTAS call is implemented and returned a valid result we'd use that as the argument to the EEH RTAS calls. If not, Linux would fall back to using the device's config_addr. Over time these addresses have moved around going from pci_dn to eeh_dev and finally into eeh_pe. Today the users look like this: config_addr = pe->config_addr; if (pe->addr) config_addr = pe->addr; rtas_call(..., config_addr, ...); However, considering the EEH core always operates on a per-PE basis and even on pseries the only per-device operation is the initial call to ibm,set-eeh-option I'm not sure if any of this actually works on an RPA system today. It doesn't make much sense to have the fallback address in a generic structure either since the bulk of the code which reference it is in pseries anyway. The EEH core makes a token effort to support looking up a PE using the config_addr by having two arguments to eeh_pe_get(). However, a survey of all the callers to eeh_pe_get() shows that all bar one have the config_addr argument hard-coded to zero.The only caller that doesn't is in eeh_pe_tree_insert() which has: if (!eeh_has_flag(EEH_VALID_PE_ZERO) && !edev->pe_config_addr) return -EINVAL; pe = eeh_pe_get(hose, edev->pe_config_addr, edev->bdfn); The third argument (config_addr) is only used if the second (pe->addr) argument is invalid. The preceding check ensures that the call to eeh_pe_get() will never happen if edev->pe_config_addr is invalid so there is no situation where eeh_pe_get() will search for a PE based on the 3rd argument. The check also means that we'll never insert a PE into the tree where pe_config_addr is zero since EEH_VALID_PE_ZERO is never set on pseries. All the users of the fallback address on pseries never actually use the fallback and all the only caller that supplies something for the config_addr argument to eeh_pe_get() never use it either. It's all dead code. This patch removes the fallback address from eeh_pe since nothing uses it. Specificly, we do this by: 1) Removing pe->config_addr 2) Removing the EEH_VALID_PE_ZERO flag 3) Removing the fallback address argument to eeh_pe_get(). 4) Removing all the checks for pe->addr being zero in the pseries EEH code. This leaves us with PE's only being identified by what's in their pe->addr field and the EEH core relying on the platform to ensure that eeh_dev's are only inserted into the EEH tree if they're actually inside a PE. No functional changes, I hope. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Oliver O'Halloran authored
There's no real reason why zero can't be a valid PE configuration address. Under qemu each sPAPR PHB (i.e. EEH supporting) has the passed-though devices on bus zero, so the PE address of bus <dddd>:00 should be zero. However, all previous versions of Linux will reject that, so Qemu at least goes out of it's way to avoid it. The Qemu implementation of ibm,get-config-addr-info2 RTAS has the following comment: > /* > * We always have PE address of form "00BB0001". "BB" > * represents the bus number of PE's primary bus. > */ So qemu puts a one into the register portion of the PE's config_addr to avoid it being zero. The whole is pretty silly considering that RTAS will return a negative error code if it can't map the device's config_addr to a PE. This patch fixes Linux to treat zero as a valid PE address. This shouldn't have any real effects due to the Qemu hack mentioned above. And the fact that Linux EEH has worked historically on PowerVM means they never pass through devices on bus zero so we would never see the problem there either. Signed-off-by:
-
Oliver O'Halloran authored
The process Linux uses for determining if a device supports EEH or not appears to be at odds with what PAPR says the OS should be doing. The current flow is something like: 1. Assume pe_config_addr is equal the the device's config_addr. 2. Attempt to enable EEH on that PE 3. Verify EEH was enabled (POWER4 bug workaround) 4. Try find the pe_config_addr using the ibm,get-config-addr-info2 RTAS call. 5. If that fails walk the pci_dn tree upwards trying to find a parent device with EEH support. If we find one then add the device to that PE. The first major problem with this process is that we need the PE config address in step 2) since its needs to be passed to the ibm,set-eeh-option RTAS call when enabling EEH for th PE. We hack around this requirement in by making the assumption in 1) and delay finding the actual PE address until 4). This is fine if: a) The PCI device is the 0th function, and b) The device is on the PE's root bus. Granted, the current sequence does appear to work on most systems even when these conditions are false. At a guess PowerVM's RTAS has workarounds to accommodate Linux's quirks or the RTAS call to enable EEH is treated as no-op on most platforms since EEH is usually enabled by default. However, what is currently implemented is a bit sketch and is downright confusing since it doesn't match up with what what PAPR suggests we should be doing. This patch re-works how we handle EEH init so that we find the PE config address using the ibm,get-config-addr-info2 RTAS call first, then use the found address to finish the EEH init process. It also drops the Power4 workaround since as of commit 471d7ff8 ("powerpc/64s: Remove POWER4 support") the kernel does not support running on a Power4 CPU so there's no need to support the Power4 platform's quirks either. With the patch applied the sequence is now: 1. Find the pe_config_addr from the device using the RTAS call. 2. Enable the PE. 3. Insert the edev into the tree and create an eeh_pe if needed. The other change made here is ignoring unsupported devices entirely. Currently the device's BARs are saved to the eeh_dev even if the device is not part of an EEH PE. Not being part of a PE means that an EEH recovery pass will never see that device so the saving the BARs is pointless. Signed-off-by:
-
Oliver O'Halloran authored
De-duplicate, and fix up the comments, and make the prototype just take a pci_dn since the job of the function is to return the pe_config_addr of the PE which contains a given device. Signed-off-by:
-
Oliver O'Halloran authored
The initialisation of EEH mostly happens in a core_initcall_sync initcall, followed by registering a bus notifier later on in an arch_initcall. Anything involving initcall dependecies is mostly incomprehensible unless you've spent a while staring at code so here's the full sequence: ppc_md.setup_arch <-- pci_controllers are created here ...time passes... core_initcall <-- pci_dns are created from DT nodes core_initcall_sync <-- platforms call eeh_init() postcore_initcall <-- PCI bus type is registered postcore_initcall_sync arch_initcall <-- EEH pci_bus notifier registered subsys_initcall <-- PHBs are scanned here There's no real requirement to do the EEH setup at the core_initcall_sync level. It just needs to be done after pci_dn's are created and before we start scanning PHBs. Simplify the flow a bit by moving the platform EEH inititalisation to an arch_initcall so we can fold the bus notifier registration into eeh_init(). Signed-off-by:
-
Oliver O'Halloran authored
No longer used since the platforms perform their EEH initialisation before calling eeh_init(). Signed-off-by:
-
Oliver O'Halloran authored
Fold pseries_eeh_init() into eeh_pseries_init() rather than having eeh_init() call it via eeh_ops->init(). It's simpler and it'll let us delete eeh_ops.init. Signed-off-by:
-
Oliver O'Halloran authored
Fold pnv_eeh_init() into eeh_powernv_init() rather than having eeh_init() call it via eeh_ops->init(). It's simpler and it'll let us delete eeh_ops.init. Signed-off-by:
-
Oliver O'Halloran authored
Drop the EEH register / unregister ops thing and have the platform pass the ops structure into eeh_init() directly. This takes one initcall out of the EEH setup path and it means we're only doing EEH setup on the platforms which actually support it. It's also less code and generally easier to follow. No functional changes. Signed-off-by:
-
Christoph Hellwig authored
Switch the 85xx defconfigs from the soon to be removed legacy ide driver to libata. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Daniel Axtens authored
In commit 61f879d9 ("powerpc/pseries: Detect secure and trusted boot state of the system.") we taught the kernel how to understand the secure-boot parameters used by a pseries guest. However, CONFIG_PPC_SECURE_BOOT still requires PowerNV. I didn't catch this because pseries_le_defconfig includes support for PowerNV and so everything still worked. Indeed, most configs will. Nonetheless, technically PPC_SECURE_BOOT doesn't require PowerNV any more. The secure variables support (PPC_SECVAR_SYSFS) doesn't do anything on pSeries yet, but I don't think it's worth adding a new condition - at some stage we'll want to add a backend for pSeries anyway. Fixes: 61f879d9 ("powerpc/pseries: Detect secure and trusted boot state of the system.") Signed-off-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Wang Wensheng authored
Build the kernel with 'make C=2': arch/powerpc/platforms/pseries/papr_scm.c:825:1: warning: symbol 'dev_attr_perf_stats' was not declared. Should it be static? Signed-off-by:
Wang Wensheng <wangwensheng4@huawei.com> Reviewed-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
This is not used by 64s. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
Since the assembly soft-masking code was moved to 64e specific, there are some 64s specific interrupt types still there. Remove them. Signed-off-by:
-
Nicholas Piggin authored
This is not used anywhere. Signed-off-by:
-
Nicholas Piggin authored
Replayed interrupts get an "artificial" struct pt_regs constructed to pass to interrupt handler functions. This did not get the softe field set correctly, it's as though the interrupt has hit while irqs are disabled. It should be IRQS_ENABLED. This is possibly harmless, asynchronous handlers should not be testing if irqs were disabled, but it might be possible for example some code is shared with synchronous or NMI handlers, and it makes more sense if debug output looks at this. Fixes: 3282a3da ("powerpc/64: Implement soft interrupt replay in C") Signed-off-by:
-
Nicholas Piggin authored
Prior to commit 3282a3da ("powerpc/64: Implement soft interrupt replay in C"), replayed interrupts returned by the regular interrupt exit code, which performs preemption in case an interrupt had set need_resched. This logic was missed by the conversion. Adding preempt_disable/enable around the interrupt replay and final irq enable will reschedule if needed. Fixes: 3282a3da ("powerpc/64: Implement soft interrupt replay in C") Signed-off-by:
-
Nicholas Piggin authored
The hypervisor interface has defined branch prediction security bits for handling the link stack. Wire them up. Signed-off-by:
-
Nicholas Piggin authored
The copy buffer is implemented as a real address in the nest which is translated from EA by copy, and used for memory access by paste. This requires that it be invalidated by TLB invalidation. TLBIE does invalidate the copy buffer, but TLBIEL does not. Add cp_abort to the tlbiel sequence. Signed-off-by:
-
Nicholas Piggin authored
Having cputable.h include mce.h means it pulls in a bunch of low level headers (e.g., synch.h) which then can't use CPU_FTR_ definitions. Signed-off-by:
-
Mahesh Salgaonkar authored
Every error log reported by OPAL is exported to userspace through a sysfs interface and notified using kobject_uevent(). The userspace daemon (opal_errd) then reads the error log and acknowledges the error log is saved safely to disk. Once acknowledged the kernel removes the respective sysfs file entry causing respective resources to be released including kobject. However it's possible the userspace daemon may already be scanning elog entries when a new sysfs elog entry is created by the kernel. User daemon may read this new entry and ack it even before kernel can notify userspace about it through kobject_uevent() call. If that happens then we have a potential race between elog_ack_store->kobject_put() and kobject_uevent which can lead to use-after-free of a kernfs object resulting in a kernel crash. eg: BUG: Unable to handle kernel data access on read at 0x6b6b6b6b6b6b6bfb Faulting instruction address: 0xc0000000008ff2a0 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV CPU: 27 PID: 805 Comm: irq/29-opal-elo Not tainted 5.9.0-rc2-gcc-8.2.0-00214-g6f56a67bcbb5-dirty #363 ... NIP kobject_uevent_env+0xa0/0x910 LR elog_event+0x1f4/0x2d0 Call Trace: 0x5deadbeef0000122 (unreliable) elog_event+0x1f4/0x2d0 irq_thread_fn+0x4c/0xc0 irq_thread+0x1c0/0x2b0 kthread+0x1c4/0x1d0 ret_from_kernel_thread+0x5c/0x6c This patch fixes this race by protecting the sysfs file creation/notification by holding a reference count on kobject until we safely send kobject_uevent(). The function create_elog_obj() returns the elog object which if used by caller function will end up in use-after-free problem again. However, the return value of create_elog_obj() function isn't being used today and there is no need as well. Hence change it to return void to make this fix complete. Fixes: 774fea1a ("powerpc/powernv: Read OPAL error log and export it through sysfs") Cc: stable@vger.kernel.org # v3.15+ Reported-by:Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Rework the logic to use a single return, reword comments, add oops] Signed-off-by:
-
- 18 Sep, 2020 7 commits
-
-
Cédric Le Goater authored
This fixes a compile error with W=1. CC arch/powerpc/kernel/traps.o ../arch/powerpc/kernel/traps.c:1663:6: error: no previous prototype for ‘stack_overflow_exception’ [-Werror=missing-prototypes] void stack_overflow_exception(struct pt_regs *regs) ^~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 3978eb78 ("powerpc/32: Add early stack overflow detection with VMAP stack.") Signed-off-by:Cédric Le Goater <clg@kaod.org> Reviewed-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Cédric Le Goater authored
This fixes a compile error with W=1. CC arch/powerpc/sysdev/xive/common.o ../arch/powerpc/sysdev/xive/common.c:1568:6: error: no previous prototype for ‘xive_debug_show_cpu’ [-Werror=missing-prototypes] void xive_debug_show_cpu(struct seq_file *m, int cpu) ^~~~~~~~~~~~~~~~~~~ ../arch/powerpc/sysdev/xive/common.c:1602:6: error: no previous prototype for ‘xive_debug_show_irq’ [-Werror=missing-prototypes] void xive_debug_show_irq(struct seq_file *m, u32 hw_irq, struct irq_data *d) ^~~~~~~~~~~~~~~~~~~ Fixes: 930914b7 ("powerpc/xive: Add a debugfs file to dump internal XIVE state") Signed-off-by: -
Cédric Le Goater authored
The check should be performed by the caller. This fixes a compile error with W=1. ../arch/powerpc/lib/sstep.c: In function ‘mlsd_8lsd_ea’: ../arch/powerpc/lib/sstep.c:225:3: error: suggest braces around empty body in an ‘if’ statement [-Werror=empty-body] ; /* Invalid form. Should already be checked for by caller! */ ^ Signed-off-by:
-
Cédric Le Goater authored
This fixes a compile error with W=1. arch/powerpc/kernel/sysfs.c: In function ‘sysfs_create_dscr_default’: arch/powerpc/kernel/sysfs.c:228:7: error: variable ‘err’ set but not used [-Werror=unused-but-set-variable] int err = 0; ^~~ cc1: all warnings being treated as errors Signed-off-by:Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Qinglang Miao authored
The logic of the warn output is incorrect. The two args should be exchanged. Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
Qinglang Miao authored
Use for_each_child_of_node() macro instead of open coding it. Signed-off-by:
-
Qinglang Miao authored
Use for_each_child_of_node() macro instead of open coding it. Signed-off-by:
-
