- 07 Feb, 2024 10 commits
-
-
Michael Strauss authored
[WHY] Only required if FIXED_VS retimer does not support DP2-capable. [HOW] Gate link rate toggle with DP 128b/132b LTTPR channel coding cap check. Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Michael Strauss <michael.strauss@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Joseph Greathouse authored
The KFD topology includes cache line size, but we have not been filling that information out unless we are parsing a CRAT table. Fill in this information for the devices where we have cache information structs, and pipe this information to the topology sysfs files. v2: squash in fix from Joe (Alex) Signed-off-by:
Joseph Greathouse <Joseph.Greathouse@amd.com> Acked-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Michael Strauss authored
The New sequence has been in use in DCN314 with no regressions introduced. Therefore, it is safe to enable this sequence for all devices using FIXED_VS retimers. So, remove the legacy codepath and its associated config flag. Reviewed-by:
Ovidiu Bunea <ovidiu.bunea@amd.com> Acked-by:
-
Hamza Mahfooz authored
We want programs besides the compositor to be able to enable or disable panel power saving features. However, since they are currently only configurable through DRM properties, that isn't possible. So, to remedy that issue introduce a new "panel_power_savings" sysfs attribute. v2: squash in fix from Hamza (Alex) Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Tested-by:
-
Qiang Ma authored
Problem: The computer in the bios initialization process, unplug the HDMI display, wait until the system up, plug in the HDMI display, did not enter the hotplug interrupt function, the display is not bright. Fix: After the above problem occurs, and the hpd ack interrupt bit is 1, the interrupt should be cleared during hpd_init initialization so that when the driver is ready, it can respond to the hpd interrupt normally. Signed-off-by:
Qiang Ma <maqianga@uniontech.com> Signed-off-by:
-
Alex Deucher authored
Missing space. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
shaoyunl authored
Skip the debugfs file creation for mes event log if the GPU doesn't use MES. This to prevent potential kernel oops when user try to read the event log in debugfs on a GPU without MES Signed-off-by:
shaoyunl <shaoyun.liu@amd.com> Reviewed-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;" pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to ensure the tg is not NULL. Fixes: 474ac4a8 ("drm/amd/display: Implement some asic specific abm call backs.") Cc: Yongqiang Sun <yongqiang.sun@amd.com> Cc: Anthony Koo <Anthony.Koo@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
'panel_cntl' structure used to control the display panel could be null, dereferencing it could lead to a null pointer access. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250) Fixes: 474ac4a8 ("drm/amd/display: Implement some asic specific abm call backs.") Cc: Yongqiang Sun <yongqiang.sun@amd.com> Cc: Anthony Koo <Anthony.Koo@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Ma Jun authored
Use existing inline function for IP version check. Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
- 31 Jan, 2024 14 commits
-
-
Friedrich Vock authored
Allows us to detect subsequent IH ring buffer overflows as well. Cc: Joshua Ashton <joshua@froggi.es> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Friedrich Vock <friedrich.vock@gmx.de> Reviewed-by:
-
Yifan Zhang authored
There is no irq enabled in vcn 4.0.5 resume, causing wrong amdgpu_irq_src status. Beside, current set function callbacks are empty with no real effect. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Acked-by:
Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by:
Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Signed-off-by:
-
Tao Zhou authored
Get UMC physical address from PSP in RAS error address coversion. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Tao Zhou authored
Convert mca address to physical address or vice versa via RAS TA. Signed-off-by:
-
Yifan Zhang authored
No need to set GC golden settings in driver from gfx 11.5.0 onwards. Signed-off-by:
Lang Yu <lang.yu@amd.com> Signed-off-by:
-
Lang Yu authored
Fix a warning. v2: Avoid unmapping attachment repeatedly when ERESTARTSYS. v3: Lock the BO before accessing ttm->sg to avoid race conditions.(Felix) [ 41.708711] WARNING: CPU: 0 PID: 1463 at drivers/gpu/drm/ttm/ttm_bo.c:846 ttm_bo_validate+0x146/0x1b0 [ttm] [ 41.708989] Call Trace: [ 41.708992] <TASK> [ 41.708996] ? show_regs+0x6c/0x80 [ 41.709000] ? ttm_bo_validate+0x146/0x1b0 [ttm] [ 41.709008] ? __warn+0x93/0x190 [ 41.709014] ? ttm_bo_validate+0x146/0x1b0 [ttm] [ 41.709024] ? report_bug+0x1f9/0x210 [ 41.709035] ? handle_bug+0x46/0x80 [ 41.709041] ? exc_invalid_op+0x1d/0x80 [ 41.709048] ? asm_exc_invalid_op+0x1f/0x30 [ 41.709057] ? amdgpu_amdkfd_gpuvm_dmaunmap_mem+0x2c/0x80 [amdgpu] [ 41.709185] ? ttm_bo_validate+0x146/0x1b0 [ttm] [ 41.709197] ? amdgpu_amdkfd_gpuvm_dmaunmap_mem+0x2c/0x80 [amdgpu] [ 41.709337] ? srso_alias_return_thunk+0x5/0x7f [ 41.709346] kfd_mem_dmaunmap_attachment+0x9e/0x1e0 [amdgpu] [ 41.709467] amdgpu_amdkfd_gpuvm_dmaunmap_mem+0x56/0x80 [amdgpu] [ 41.709586] kfd_ioctl_unmap_memory_from_gpu+0x1b7/0x300 [amdgpu] [ 41.709710] kfd_ioctl+0x1ec/0x650 [amdgpu] [ 41.709822] ? __pfx_kfd_ioctl_unmap_memory_from_gpu+0x10/0x10 [amdgpu] [ 41.709945] ? srso_alias_return_thunk+0x5/0x7f [ 41.709949] ? tomoyo_file_ioctl+0x20/0x30 [ 41.709959] __x64_sys_ioctl+0x9c/0xd0 [ 41.709967] do_syscall_64+0x3f/0x90 [ 41.709973] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fixes: 101b8104 ("drm/amdkfd: Move dma unmapping after TLB flush") Signed-off-by:
-
Srinivasan Shanmugam authored
The error message buffer overflow 'dc->links' 12 <= 12 suggests that the code is trying to access an element of the dc->links array that is beyond its bounds. In C, arrays are zero-indexed, so an array with 12 elements has valid indices from 0 to 11. Trying to access dc->links[12] would be an attempt to access the 13th element of a 12-element array, which is a buffer overflow. To fix this, ensure that the loop does not go beyond the last valid index when accessing dc->links[i + 1] by subtracting 1 from the loop condition. This would ensure that i + 1 is always a valid index in the array. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:208 get_host_router_total_dp_tunnel_bw() error: buffer overflow 'dc->links' 12 <= 12 Fixes: 59f1622a ("drm/amd/display: Add dpia display mode validation logic") Cc: PeiChen Huang <peichen.huang@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Add a NULL check for the kzalloc call that allocates memory for dummy_updates in the amdgpu_dm_atomic_commit_tail function. Previously, if kzalloc failed to allocate memory and returned NULL, the code would attempt to use the NULL pointer. The fix is to check if kzalloc returns NULL, and if so, log an error message and skip the rest of the current loop iteration with the continue statement. This prevents the code from attempting to use the NULL pointer. Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reported-by:
Julia Lawall <julia.lawall@inria.fr> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202401300629.ICnCt983-lkp@intel.com/ Fixes: 135fd1b3 ("drm/amd/display: Reduce stack size") Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Return 0 for success scenairos in 'gmc_v6/7/8/9_0_hw_init()' Fixes the below: drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c:920 gmc_v6_0_hw_init() warn: missing error code? 'r' drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:1104 gmc_v7_0_hw_init() warn: missing error code? 'r' drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:1224 gmc_v8_0_hw_init() warn: missing error code? 'r' drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:2347 gmc_v9_0_hw_init() warn: missing error code? 'r' Fixes: fac4ebd7 ("drm/amdgpu: Fix with right return code '-EIO' in 'amdgpu_gmc_vram_checking()'") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
YiPeng Chai authored
Need to resume ras during gpu reset for gfx v9_4_3 sriov Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
-
Tao Zhou authored
Send RAS disable feature command in fini. Signed-off-by:
-
Hawking Zhang authored
Update boot time errors polling sequence to align with the latest firmware change. Signed-off-by:
Frank Min <Frank.Min@amd.com> Signed-off-by:
-
David McFarland authored
The same calls are made directly above, but conditional on the firmware loading and validating successfully. Cc: stable@vger.kernel.org Fixes: 9931b676 ("drm/amd: Load GFX10 microcode during early_init") Signed-off-by:
David McFarland <corngood@gmail.com> Reviewed-by:
-
Ma Jun authored
Fix the warning info below during mode1 reset. [ +0.000004] Call Trace: [ +0.000004] <TASK> [ +0.000006] ? show_regs+0x6e/0x80 [ +0.000011] ? __flush_work.isra.0+0x2e8/0x390 [ +0.000005] ? __warn+0x91/0x150 [ +0.000009] ? __flush_work.isra.0+0x2e8/0x390 [ +0.000006] ? report_bug+0x19d/0x1b0 [ +0.000013] ? handle_bug+0x46/0x80 [ +0.000012] ? exc_invalid_op+0x1d/0x80 [ +0.000011] ? asm_exc_invalid_op+0x1f/0x30 [ +0.000014] ? __flush_work.isra.0+0x2e8/0x390 [ +0.000007] ? __flush_work.isra.0+0x208/0x390 [ +0.000007] ? _prb_read_valid+0x216/0x290 [ +0.000008] __cancel_work_timer+0x11d/0x1a0 [ +0.000007] ? try_to_grab_pending+0xe8/0x190 [ +0.000012] cancel_work_sync+0x14/0x20 [ +0.000008] amddrm_sched_stop+0x3c/0x1d0 [amd_sched] [ +0.000032] amdgpu_device_gpu_recover+0x29a/0xe90 [amdgpu] This warning info was printed after applying the patch "drm/sched: Convert drm scheduler to use a work queue rather than kthread". The root cause is that amdgpu driver tries to use the uninitialized work_struct in the struct drm_gpu_scheduler v2: - Rename the function to amdgpu_ring_sched_ready and move it to amdgpu_ring.c (Alex) v3: - Fix a few more checks based on Vitaly's patch (Alex) v4: - squash in fix noticed by Bert in https://gitlab.freedesktop.org/drm/amd/-/issues/3139 Fixes: 11b3b9f4 ("drm/sched: Check scheduler ready before calling timeout handling") Reviewed-by:
Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by:
-
- 29 Jan, 2024 16 commits
-
-
Yang Wang authored
use helper macro HW_ERR to instead of Hardware error string. Signed-off-by:
-
Ma Jun authored
Replace the hard-coded numbers with macro definition Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Aric Cyr authored
- Add control flag for IPS residency profiling - Populate invalid split index to be 0xF - Fix dcn35 8k30 Underflow/Corruption Issue - Fix DP audio settings - Use correct phantom pipe when populating subvp pipe info - Fix incorrect mpc_combine array size - Fix DPSTREAM CLK on and off sequence - Fix USB-C flag update after enc10 feature init - Add debugfs disallow edp psr - Unify optimize_required flags and VRR adjustments - Increased min_dcfclk_mhz and min_fclk_mhz - Fix static screen event mask definition change Reviewed-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Anthony Koo authored
- Add control flag for IPS residency profiling Reviewed-by:
-
Alvin Lee authored
[why] There exists scenarios where the split index for subvp can be pipe index 0. The assumption in FW is that the split index won't be 0 but this is incorrect. [how] Instead populate non-split cases to be 0xF to differentiate between split and non-split. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Acked-by:
Alvin Lee <alvin.lee2@amd.com> Tested-by:
-
Fangzhi Zuo authored
[why] odm calculation is missing for pipe split policy determination and cause Underflow/Corruption issue. [how] Add the odm calculation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Fangzhi Zuo <jerry.zuo@amd.com> Tested-by:
-
Mounika Adhuri authored
[why] To Remove warnings of clk_mgr. [How] Added code to remove warnings by resolving redefinations. Reviewed-by:
Martin Leung <martin.leung@amd.com> Acked-by:
Mounika Adhuri <moadhuri@amd.com> Tested-by:
-
Charlene Liu authored
[why] Audio channel layout for 5.1ch is not correct [how] Add the audio layout for 5.1ch (channel_count = 6). Add divided by zero check. Reviewed-by:
Zhan Liu <zhan.liu@amd.com> Acked-by:
-
Nicholas Susanto authored
[Why] On 14us for exit latency time causes underflow for 8K monitor with HDR on. Increasing the latency to 28us fixes the underflow. [How] Increase the latency to 28us. This workaround should be sufficient before we figure out why SR exit so long. Reviewed-by:
Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by:
Nicholas Susanto <nicholas.susanto@amd.com> Tested-by:
-
Wenjing Liu authored
[why] In current code, we recognize a pipe as a phantom pipe if it references the same phantom stream. However it can also a phantom split pipe. If the phantom split pipe has a smaller pipe index than the phantom pipe we will mistakenly use the phantom split pipe as the phantom pipe. This causes an incorrect subvp configuration where the first half of the screen is flashing solid white image. [how] Add additional check that the pipe needs to be an OTG master pipe. Reviewed-by:
-
Wenjing Liu authored
[why] MAX_SURFACES is per stream, while MAX_PLANES is per asic. The mpc_combine is an array that records all the planes per asic. Therefore MAX_PLANES should be used as the array size. Using MAX_SURFACES causes array overflow when there are more than 3 planes. [how] Use the MAX_PLANES for the mpc_combine array size. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by:
Nevenko Stupar <nevenko.stupar@amd.com> Reviewed-by:
-
Dmytro Laktyushkin authored
[Why] Secondary DP2 display fails to light up in some instances [How] Clock needs to be on when DPSTREAMCLK*_EN =1. This change moves dtbclk_p enable/disable point to make sure this is the case Reviewed-by:
Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Acked-by:
Daniel Miess <daniel.miess@amd.com> Signed-off-by:
-
Eric Yang authored
[Why] Unguarded SMU and CLK IP access cause issue on FPGA [How] Guard them for FPGA environment Reviewed-by:
Sung joon Kim <sungjoon.kim@amd.com> Acked-by:
Eric Yang <eric.yang@amd.com> Tested-by:
-
Fudongwang authored
[Why] 1. To watch dmcub inbox1 ring buffer cmd type without tools 2. dmub_cmd_PLAT_54186_wa 66 bytes [How] Added dmcub cmd type enum: unsigned char for debug use only, also fixed 66 bytes issue by using unsigned int in bit define instead of unsigned char. Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Fudongwang <fudong.wang@amd.com> Tested-by:
-
Taimur Hassan authored
[Why] Previous patch to allow DTBCLK disable didn't address boot case. Driver thinks DTBCLK is disabled by default, so we don't send disable message to PMFW. DTBCLK is then enabled at idle desktop on boot, burning power. [How] Set dtbclk_en to true on boot so that disable message is sent during first commit. Reviewed-by:
Taimur Hassan <syed.hassan@amd.com> Tested-by:
-
Charlene Liu authored
[why] BIOS's integration info table not following the original order which is phy instance is ext_displaypath's array index. [how] Move them to follow the original order. Reviewed-by:
Muhammad Ahmed <ahmed.ahmed@amd.com> Acked-by:
-
