- 08 Feb, 2024 27 commits
-
-
Eric Dumazet authored
unregister_nexthop_notifier() assumes the caller does not hold rtnl. We need in the following patch to use it from a context already holding rtnl. Add __unregister_nexthop_notifier(). unregister_nexthop_notifier() becomes a wrapper. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Reviewed-by:
Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20240206144313.2050392-9-edumazet@google.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
exit_batch_rtnl() is called while RTNL is held, and devices to be unregistered can be queued in the dev_kill_list. This saves one rtnl_lock()/rtnl_unlock() pair per netns and one unregister_netdevice_many() call per netns. Signed-off-by:
-
Eric Dumazet authored
exit_batch_rtnl() is called while RTNL is held, and devices to be unregistered can be queued in the dev_kill_list. This saves one rtnl_lock()/rtnl_unlock() pair, and one unregister_netdevice_many() call. Note: it should be possible to remove the synchronize_net() call from geneve_sock_release() in a future patch. v4: move WARN_ON_ONCE(!list_empty(&gn->sock_list)) into geneve_exit_net(), after devices have been unregistered. (Antoine Tenart feedback) Signed-off-by:
-
Eric Dumazet authored
exit_batch_rtnl() is called while RTNL is held, and devices to be unregistered can be queued in the dev_kill_list. This saves one rtnl_lock()/rtnl_unlock() pair, and one unregister_netdevice_many() call. v2: Added bond_net_pre_exit() method to make sure bond_destroy_sysfs() is called before we unregister the devices in bond_net_exit_batch_rtnl (Antoine Tenart : https://lore.kernel.org/netdev/170688415193.5216.10499830272732622816@kwain/) Signed-off-by:Jay Vosburgh <j.vosburgh@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Reviewed-by:
-
Eric Dumazet authored
exit_batch_rtnl() is called while RTNL is held, and devices to be unregistered can be queued in the dev_kill_list. This saves one rtnl_lock()/rtnl_unlock() pair, and one unregister_netdevice_many() call. Signed-off-by:
-
Eric Dumazet authored
exit_batch_rtnl() is called while RTNL is held. This saves one rtnl_lock()/rtnl_unlock() pair. We also need to create nexthop_net_exit() to make sure net->nexthop.devhash is not freed too soon, otherwise we will not be able to unregister netdev from exit_batch_rtnl() methods. Signed-off-by:
-
Eric Dumazet authored
Many (struct pernet_operations)->exit_batch() methods have to acquire rtnl. In presence of rtnl mutex pressure, this makes cleanup_net() very slow. This patch adds a new exit_batch_rtnl() method to reduce number of rtnl acquisitions from cleanup_net(). exit_batch_rtnl() handlers are called while rtnl is locked, and devices to be killed can be queued in a list provided as their second argument. A single unregister_netdevice_many() is called right before rtnl is released. exit_batch_rtnl() handlers are called before ->exit() and ->exit_batch() handlers. Signed-off-by:
-
Jakub Kicinski authored
Arınç ÜNAL says: ==================== MT7530 DSA Subdriver Improvements Act II This is the second patch series with the goal of simplifying the MT7530 DSA subdriver and improving support for MT7530, MT7531, and the switch on the MT7988 SoC. I have done a simple ping test to confirm basic communication on all switch ports on MCM and standalone MT7530, and MT7531 switch with this patch series applied. MT7621 Unielec, MCM MT7530: rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000 MT7622 Bananapi, MT7531: gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000 MT7623 Bananapi, standalone MT7530: rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000 This patch series is the continuation of the patch series linked below. https://lore.kernel.org/r/20230522121532.86610-1-arinc.unal@arinc9.comSigned-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> ==================== Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-0-d7d92a185cb1@arinc9.comSigned-off-by:
-
Arınç ÜNAL authored
There's no need to clear the config->supported_interfaces bitmap before reporting the supported interfaces as all bits in the bitmap will already be initialized to zero when the phylink_config structure is allocated. The "config" pointer points to &dp->phylink_config, and "dp" is allocated by dsa_port_touch() with kzalloc(), so all its fields are filled with zeroes. There's no code that would change the bitmap beforehand. Remove it. Acked-by:
Daniel Golle <daniel@makrotopia.org> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Arınç ÜNAL authored
On the switch on the MT7988 SoC, as shown in Block Diagram 8.1.1.3 on page 125 of "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version) v0.1", there are only 4 PHYs. That's port 0 to 3. Set the case for ports which connect to switch PHYs to '0 ... 3'. Port 4 and 5 are not used at all in this design. Link: https://wiki.banana-pi.org/Banana_Pi_BPI-R4#Documents [1] Acked-by:
-
Arınç ÜNAL authored
The pad_setup function pointer was introduced with 88bdef8b ("net: dsa: mt7530: Extend device data ready for adding a new hardware"). It was being used to set up the core clock and port 6 of the MT7530 switch, and pll of the MT7531 switch. All of these were moved to more appropriate locations, and it was never used for the switch on the MT7988 SoC. Therefore, this function pointer hasn't got a use anymore. Remove it. Acked-by:
-
Arınç ÜNAL authored
mt7530_pad_clk_setup() is called if port 6 is enabled. It used to do more things than setting up port 6. That part was moved to more appropriate locations, mt7530_setup() and mt7530_pll_setup(). Now that all it does is set up port 6, rename it to mt7530_setup_port6(), and move it to a more appropriate location, under mt7530_mac_config(). Change mt7530_setup_port6() to void as there're no error cases. Leave an empty mt7530_pad_clk_setup() to satisfy the pad_setup function pointer. This is the code path for setting up the ports before: dsa_switch_ops :: phylink_mac_config() -> mt753x_phylink_mac_config() -> mt753x_mac_config() -> mt753x_info :: mac_port_config() -> mt7530_mac_config() -> mt7530_setup_port5() -> mt753x_pad_setup() -> mt753x_info :: pad_setup() -> mt7530_pad_clk_setup() This is after: dsa_switch_ops :: phylink_mac_config() -> mt753x_phylink_mac_config() -> mt753x_mac_config() -> mt753x_info :: mac_port_config() -> mt7530_mac_config() -> mt7530_setup_port5() -> mt7530_setup_port6() Reviewed-by: -
Arınç ÜNAL authored
This code is from before this driver was converted to phylink API. Phylink deals with the unsupported interface cases before mt7530_pad_clk_setup() is run. Therefore, the default case would never run. However, it must be defined nonetheless to handle all the remaining enumeration values, the phy-modes. Switch to if statement for RGMII and return which simplifies the code and saves an indent. Set P6_INTF_MODE, which is the three least significant bits of the MT7530_P6ECR register, to 0 for RGMII even though it will already be 0 after reset. This is to keep supporting dynamic reconfiguration of the port in the case the interface changes from TRGMII to RGMII. Disable the TRGMII clocks for all cases. They will be enabled if TRGMII is being used. Read XTAL after checking for RGMII as it's only needed for the TRGMII interface mode. Reviewed-by:
-
Arınç ÜNAL authored
The crystal frequency concerns the switch core. The frequency should be checked when the switch is being set up so the driver can reject the unsupported hardware earlier and without requiring port 6 to be used. Move it to mt7530_setup(). Drop the unnecessary function printing. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
Arınç ÜNAL authored
There're two code paths for setting up port 5: mt7530_setup() -> mt7530_setup_port5() mt753x_phylink_mac_config() -> mt753x_mac_config() -> mt7530_mac_config() -> mt7530_setup_port5() On the first code path, priv->p5_intf_sel is either set to P5_INTF_SEL_PHY_P0 or P5_INTF_SEL_PHY_P4 when mt7530_setup_port5() is run. On the second code path, priv->p5_intf_sel is set to P5_INTF_SEL_GMAC5 when mt7530_setup_port5() is run. Empty the default case which will never run but is needed nonetheless to handle all the remaining enumeration values. Reviewed-by: -
Heiner Kallweit authored
After 1c75c424bd43 ("leds: class: If no default trigger is given, make hw_control trigger the default trigger") this line isn't needed any longer. Signed-off-by:Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2024-02-01 1) IPSec global stats for xfrm and mlx5 2) XSK memory improvements for non-linear SKBs 3) Software steering debug dump to use seq_file ops 4) Various code clean-ups * tag 'mlx5-updates-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: XDP, Exclude headroom and tailroom from memory calculations net/mlx5e: XSK, Exclude tailroom from non-linear SKBs memory calculations net/mlx5: DR, Change SWS usage to debug fs seq_file interface net/mlx5: Change missing SyncE capability print to debug net/mlx5: Remove initial segmentation duplicate definitions net/mlx5: Return specific error code for timeout on wait_fw_init net/mlx5: SF, Stop waiting for FW as teardown was called net/mlx5: remove fw reporter dump option for non PF net/mlx5: remove fw_fatal reporter dump option for non PF net/mlx5: Rename mlx5_sf_dev_remove Documentation: Fix counter name of mlx5 vnic reporter net/mlx5e: Delete obsolete IPsec code net/mlx5e: Connect mlx5 IPsec statistics with XFRM core xfrm: get global statistics from the offloaded device xfrm: generalize xdo_dev_state_update_curlft to allow statistics update ==================== Link: https://lore.kernel.org/r/20240206005527.1353368-1-saeed@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Hangbin Liu says: ==================== selftests: bonding: use slowwait when waiting There are a lot waitings in bonding tests use sleep. Let's replace them with slowwait(added in the first patch). This could save much test time. e.g. bond-break-lacpdu-tx.sh before: 0m16.346s after: 0m2.824s bond_options.sh before: 9m25.299s after: 6m14.439s bond-lladdr-target.sh before: 0m7.090s after: 0m6.148s In total, we could save about 180 seconds. ==================== Link: https://lore.kernel.org/r/20240205130048.282087-1-liuhangbin@gmail.comSigned-off-by:
-
Hangbin Liu authored
Use slowwait instead of hard code sleep for bonding tests. In function setup_prepare(), the client_create() will be called after server_create(). So I think there is no need to sleep in server_create() and remove it. For lab_lib.sh, remove bonding module may affect other running bonding tests. And some test env may buildin bond which can't be removed. The bonding link should be removed by lag_reset_network() or netns delete. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240205130048.282087-5-liuhangbin@gmail.comSigned-off-by:
-
Hangbin Liu authored
The purpose of grat_arp is testing commit 9949e2ef ("bonding: fix send_peer_notif overflow"). As the send_peer_notif was defined to u8, to overflow it, we need to send_peer_notif = num_peer_notif * peer_notif_delay = num_grat_arp * peer_notify_delay / miimon > 255 (kernel) (kernel parameter) (user parameter) e.g. 30 (num_grat_arp) * 1000 (peer_notify_delay) / 100 (miimon) > 255. Which need 30s to complete sending garp messages. To save the testing time, the only way is reduce the miimon number. Something like 30 (num_grat_arp) * 100 (peer_notify_delay) / 10 (miimon) > 255. To save more time, the 50 num_grat_arp testing could be removed. The arp_validate_test also need to check the mii_status, which sleep too long. Use slowwait to save some time. For other connection checkings, make sure active slave changed first. Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
-
Hangbin Liu authored
Use tc filter to check if LACP was sent, which is accurate and save more time. No need to remove bonding module as some test env may buildin bonding. And the bond link has been deleted. Reviewed-by:
-
Hangbin Liu authored
Add slowwait functions to wait for some operations that may need a long time to finish. The busywait executes the cmd too fast, which is kind of wasting cpu in this scenario. At the same time, if shell debugging is enabled with `set -x`. the busywait will output too much logs. Reviewed-by:
-
Wen Gu authored
According to latest release of SMCv2.1[1], the term 'virtual ISM' has been changed to 'Emulated-ISM' to avoid the ambiguity of the word 'virtual' in different contexts. So the names or comments in the code need be modified accordingly. [1] https://www.ibm.com/support/pages/node/7112343Signed-off-by:
Wen Gu <guwen@linux.alibaba.com> Reviewed-by:
Simon Horman <horms@kernel.org> Reviewed-by:
Wenjia Zhang <wenjia@linux.ibm.com> Link: https://lore.kernel.org/r/20240205033317.127269-1-guwen@linux.alibaba.comSigned-off-by:
-
Jakub Kicinski authored
Heiner Kallweit says: ==================== net: phy: realtek: complete 5Gbps support and replace private constants Realtek maps standard C45 registers to vendor-specific registers which can be accessed via C22 w/o MMD. For an unknown reason C22 MMD access to C45 registers isn't supported for integrated PHY's. However the vendor-specific registers preserve the format of the C45 registers, so we can use standard constants. First two patches are cherry-picked from a series posted by Marek some time ago. RTL8126 supports 5Gbps, therefore add the missing 5Gbps support to rtl822x_config_aneg(). ==================== Link: https://lore.kernel.org/r/31a83fd9-90ce-402a-84c7-d5c20540b730@gmail.comSigned-off-by:
-
Heiner Kallweit authored
RTL8126 as an evolution of RTL8125 supports 5Gbps. rtl822x_config_aneg() is used by the PHY driver for the integrated PHY, therefore add 5Gbps support to it. Signed-off-by:
-
Marek Behún authored
Drop the ad-hoc MDIO constants used in the driver and use generic constants instead. Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
-
Marek Behún authored
Add constants indicating 2.5g and 5g ability in the MMD PMA speed register. Signed-off-by:
-
- 07 Feb, 2024 13 commits
-
-
Jiri Pirko authored
Similar to what is done in dpll_device_unregister(), add assertion to __dpll_pin_unregister() to make sure driver does not try to unregister non-registered pin. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Link: https://lore.kernel.org/r/20240206074853.345744-1-jiri@resnulli.usSigned-off-by:
-
Markus Elfring authored
A wrapper function is available since the commit 890cc39a ("drivers: provide devm_platform_get_and_ioremap_resource()"). Thus reuse existing functionality instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Tested-by:
Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/29e9dc0f-5597-4fee-be5c-25a5ab4fe2dc@web.deSigned-off-by:
-
Amit Cohen authored
init_dummy_netdev() always returns zero and all the callers do not check the returned value. Set the function to not return value, as it is not really used today. Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
-
Jakub Kicinski authored
Russell King says: ==================== net: eee network driver cleanups Since commit d1420bb9 ("net: phy: improve generic EEE ethtool functions") changed phylib to set eee->eee_active and eee->eee_enabled, overriding anything that drivers have set these to prior to calling phy_ethtool_get_eee(). Therefore, drivers setting these members becomes redundant, since phylib overwrites the values they set. This series finishes off Heiner's work in the referenced commit by removing these redundant writes in various drivers and any associated code or structure members that become unnecessary. ==================== Link: https://lore.kernel.org/r/Zb9/O81fVAZw4ANr@shell.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
b53_get_mac_eee() sets both eee_enabled and eee_active, and then returns zero. dsa_slave_get_eee(), which calls this function, will then continue to call phylink_ethtool_get_eee(), which will return -EOPNOTSUPP if there is no PHY present, otherwise calling phy_ethtool_get_eee() which in turn will call genphy_c45_ethtool_get_eee(). genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active with its own interpretation from the PHYs settings and negotiation result. Thus, when there is no PHY, dsa_slave_get_eee() will fail with -EOPNOTSUPP, meaning eee_enabled and eee_active will not be returned to userspace. When there is a PHY, eee_enabled and eee_active will be overwritten by phylib, making the setting of these members in b53_get_mac_eee() entirely unnecessary. Remove this code, thus simplifying b53_get_mac_eee(). Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
-
Russell King (Oracle) authored
bcmasp_get_eee() sets edata->eee_active and edata->eee_enabled from its own copy, and then calls phy_ethtool_get_eee() which in turn will call genphy_c45_ethtool_get_eee(). genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active with its own interpretation from the PHYs settings and negotiation result. Therefore, setting these members in bcmasp_get_eee() is redundant, and can be removed. This also makes intf->eee.eee_active unnecessary, so remove this and use a local variable where appropriate. Reviewed-by:
-
Russell King (Oracle) authored
bcmgenet_get_eee() sets edata->eee_active and edata->eee_enabled from its own copy, and then calls phy_ethtool_get_eee() which in turn will call genphy_c45_ethtool_get_eee(). genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active with its own interpretation from the PHYs settings and negotiation result. Therefore, setting these members in bcmgenet_get_eee() is redundant, and can be removed. This also makes priv->eee.eee_active unnecessary, so remove this and use a local variable where appropriate. Reviewed-by:
-
Russell King (Oracle) authored
fec_enet_get_eee() sets edata->eee_active and edata->eee_enabled from its own copy, and then calls phy_ethtool_get_eee() which in turn will call genphy_c45_ethtool_get_eee(). genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active with its own interpretation from the PHYs settings and negotiation result. Therefore, setting these members in fec_enet_get_eee() is redundant. Remove this, and remove the setting of fep->eee.eee_active member which becomes a write-only variable. Signed-off-by:
-
Russell King (Oracle) authored
sxgbe_get_eee() sets edata->eee_active and edata->eee_enabled from its own copy, and then calls phy_ethtool_get_eee() which in turn will call genphy_c45_ethtool_get_eee(). genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active with its own interpretation from the PHYs settings and negotiation result. Therefore, setting these members in sxgbe_get_eee() is redundant. Remove this, and remove the priv->eee_active member which then becomes a write-only variable. Reviewed-by:
-
Russell King (Oracle) authored
stmmac_ethtool_op_get_eee() sets both eee_enabled and eee_active, and then goes on to call phylink_ethtool_get_eee(). phylink_ethtool_get_eee() will return -EOPNOTSUPP if there is no PHY present, otherwise calling phy_ethtool_get_eee() which in turn will call genphy_c45_ethtool_get_eee(). genphy_c45_ethtool_get_eee() will overwrite eee_enabled and eee_active with its own interpretation from the PHYs settings and negotiation result. Thus, when there is no PHY, stmmac_ethtool_op_get_eee() will fail with -EOPNOTSUPP, meaning eee_enabled and eee_active will not be returned to userspace. When there is a PHY, eee_enabled and eee_active will be overwritten by phylib, making the setting of these members in stmmac_ethtool_op_get_eee() entirely unnecessary. Remove this code, thus simplifying stmmac_ethtool_op_get_eee(). Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/E1rWbMs-002cCV-EE@rmk-PC.armlinux.org.ukSigned-off-by:
-
David S. Miller authored
From: Andrew Lunn <andrew@lunn.ch> To: Heiner Kallweit <hkallweit1@gmail.com>, Russell King <linux@armlinux.org.uk>, "David S. Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>, Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>, Florian Fainelli <f.fainelli@gmail.com>, Vladimir Oltean <olteanv@gmail.com> Cc: netdev@vger.kernel.org, Tim Menninger <tmenninger@purestorage.com>, Andrew Lunn <andrew@lunn.ch> ==================== net: Unify C22 and C45 error handling during bus enumeration When enumerating an MDIO bus, an MDIO bus driver can return -ENODEV to a C22 read transaction to indicate there is no device at that address on the bus. Enumeration will then continue with the next address on the bus. Modify C45 enumeration so that it also accepts -ENODEV and moves to the next address on the bus, rather than consider -ENODEV as a fatal error. Convert the mv88e6xxx driver to return -ENODEV rather than 0xffff on read for families which do not support C45 bus transactions. This is more efficient, since enumeration will scan multiple devices at one address when 0xffff is returned, where as -EONDEV immediately jumps to the next address on the bus. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
MDIO bus drivers can return -ENODEV when they know the bus does not have a device at the given address, e.g. because of hardware limitation. One such limitation is that the bus does not support C45 at all. This is more efficient than returning 0xffff, since it immediately stops the probing on the given address, where as further reads can be made when 0xffff is returned. Signed-off-by:
-
Andrew Lunn authored
When scanning the MDIO bus for C22 devices, the driver returning -ENODEV is not considered fatal, it just indicates the MDIO bus master knows there is no device at that address, maybe because of hardware limitation. Make the C45 scan code act on -ENODEV the same way, to make C22 and C45 more uniform. It is expected all reads for a given address will return -ENODEV, so within get_phy_c45_ids() only the first place a read occurs has been changed. Reviewed-by:
-
