- 04 Feb, 2015 40 commits
-
-
Andrew Duggan authored
commit 8414947a upstream. If a touchpad reports the F11 data40 register then this indicates that the touchpad reports additional ACM (Accidental Contact Mitigation) data after the F11 data in the HID attention report. These additional bytes shift the position of the F30 button data causing the driver to incorrectly report button state when this functionality is present. This patch accounts for the additional data in the report. Fixes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1398533Signed-off-by:
Andrew Duggan <aduggan@synaptics.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Andrew Duggan authored
commit 9e2c327e upstream. There are additional queries which are optional and may not be present depending on the configuration of the firmware. Knowing which queries are present is needed to properly compute the address of Query 12 and all subsequent queries. Additional bits in Query 1 are used to indicate the presence of these optional queries. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Michal Hocko authored
commit 45f87de5 upstream. Commit 2457aec6 ("mm: non-atomically mark page accessed during page cache allocation where possible") has added a separate parameter for specifying gfp mask for radix tree allocations. Not only this is less than optimal from the API point of view because it is error prone, it is also buggy currently because grab_cache_page_write_begin is using GFP_KERNEL for radix tree and if fgp_flags doesn't contain FGP_NOFS (mostly controlled by fs by AOP_FLAG_NOFS flag) but the mapping_gfp_mask has __GFP_FS cleared then the radix tree allocation wouldn't obey the restriction and might recurse into filesystem and cause deadlocks. This is the case for most filesystems unfortunately because only ext4 and gfs2 are using AOP_FLAG_NOFS. Let's simply remove radix_gfp_mask parameter because the allocation context is same for both page cache and for the radix tree. Just make sure that the radix tree gets only the sane subset of the mask (e.g. do not pass __GFP_WRITE). Long term it is more preferable to convert remaining users of AOP_FLAG_NOFS to use mapping_gfp_mask instead and simplify this interface even further. Reported-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Michal Marek authored
commit a16c5f99 upstream. scripts/Makefile.clean treats absolute path specially, but $(objtree)/debian is no longer an absolute path since 7e1c0477 (kbuild: Use relative path for $(objtree). Work around this by checking if the path starts with $(objtree)/. Reported-and-tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Fixes: 7e1c0477 (kbuild: Use relative path for $(objtree) Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Daniel Borkmann authored
commit b485342b upstream. Commit a074335a ("x86, um: Mark system call tables readonly") was supposed to mark the sys_call_table in UML as RO by adding the const, but it doesn't have the desired effect as it's nevertheless being placed into the data section since __cacheline_aligned enforces sys_call_table being placed into .data..cacheline_aligned instead. We need to use the ____cacheline_aligned version instead to fix this issue. Before: $ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table" U sys_writev 0000000000000000 D sys_call_table 0000000000000000 D syscall_table_size After: $ nm -v arch/x86/um/sys_call_table_64.o | grep -1 "sys_call_table" U sys_writev 0000000000000000 R sys_call_table 0000000000000000 D syscall_table_size Fixes: a074335a ("x86, um: Mark system call tables readonly") Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Richard Weinberger authored
commit f911d731 upstream. futex_atomic_cmpxchg_inatomic() does not work on UML because it triggers a copy_from_user() in kernel context. On UML copy_from_user() can only be used if the kernel was called by a real user space process such that UML can use ptrace() to fetch the value. Reported-by:
Miklos Szeredi <miklos@szeredi.hu> Suggested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Daniel Walter <d.walter@0x90.at> Signed-off-by:
-
Dan Carpenter authored
commit b5c8afe5 upstream. "origPtr" is used as an offset into the bd->dbuf[] array. That array is allocated in start_bunzip() and has "bd->dbufSize" number of elements so the test here should be >= instead of >. Later we check "origPtr" again before using it as an offset so I don't know if this bug can be triggered in real life. Fixes: bc22c17e ('bzip2/lzma: library support for gzip, bzip2 and lzma decompression') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Alain Knaff <alain@knaff.lu> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Keerthy authored
commit c4cf0935 upstream. Correct returning IRQ_HANDLED unconditionally in the irq handler. Return IRQ_NONE for some interrupt which we do not expect to be handled in this handler. This prevents kernel stalling with back to back spurious interrupts. Fixes: 2722e56d ("OMAP4: l3: Introduce l3-interconnect error handling driver") Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Keerthy authored
commit 61b43d4e upstream. On certain SoCs such as AM437x SoC, L3_noc error registers are maintained in power domain such as per domain which looses context as part of low power state such as RTC+DDR mode. On these platforms when we mask interrupts which we cannot handle, the source of these interrupts still remain on resume, however, the flag mux registers now contain their reset value (unmasked) - this breaks the system with infinite interrupts since we do not these interrupts to take place ever again. To handle this: restore the masking of interrupts which we have already recorded in the system as ones we cannot handle. Fixes: 2100b595 ("bus: omap_l3_noc: ignore masked out unclearable targets") Acked-by:
-
Francesco Ruggeri authored
commit c4dc3046 upstream. Commit f95499c3 ("n_tty: Don't wait for buffer work in read() loop") introduces a race window where a pty master can be signalled that the pty slave was closed before all the data that the slave wrote is delivered. Commit f8747d4a ("tty: Fix pty master read() after slave closes") fixed the problem in case of n_tty_read, but the problem still exists for n_tty_poll. This can be seen by running 'for ((i=0; i<100;i++));do ./test.py ;done' where test.py is: import os, select, pty (pid, pty_fd) = pty.fork() if pid == 0: os.write(1, 'This string should be received by parent') else: poller = select.epoll() poller.register( pty_fd, select.EPOLLIN ) ready = poller.poll( 1 * 1000 ) for fd, events in ready: if not events & select.EPOLLIN: print 'missed POLLIN event' else: print os.read(fd, 100) poller.close() The string from the slave is missed several times. This patch takes the same approach as the fix for read and special cases this condition for poll. Tested on 3.16. Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Dmitry Torokhov authored
commit 7c4f5607 upstream. The 'max' size passed into the function is measured in number of bits (KEY_MAX, LED_MAX, etc) so we need to convert it accordingly before trying to copy the data out, otherwise we will try copying too much and end up with up with a page fault. Reported-by:
Pavel Machek <pavel@ucw.cz> Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Mathias Krause authored
commit 3e14dcf7 upstream. Commit 5d26a105 ("crypto: prefix module autoloading with "crypto-"") changed the automatic module loading when requesting crypto algorithms to prefix all module requests with "crypto-". This requires all crypto modules to have a crypto specific module alias even if their file name would otherwise match the requested crypto algorithm. Even though commit 5d26a105 added those aliases for a vast amount of modules, it was missing a few. Add the required MODULE_ALIAS_CRYPTO annotations to those files to make them get loaded automatically, again. This fixes, e.g., requesting 'ecb(blowfish-generic)', which used to work with kernels v3.18 and below. Also change MODULE_ALIAS() lines to MODULE_ALIAS_CRYPTO(). The former won't work for crypto modules any more. Fixes: 5d26a105 ("crypto: prefix module autoloading with "crypto-"") Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> [ luis: backported to 3.16: dropped changes to: - arch/x86/crypto/sha-mb/sha1_mb.c ] Signed-off-by:
-
Kees Cook authored
commit 4943ba16 upstream. This adds the module loading prefix "crypto-" to the template lookup as well. For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly includes the "crypto-" prefix at every level, correctly rejecting "vfat": net-pf-38 algif-hash crypto-vfat(blowfish) crypto-vfat(blowfish)-all crypto-vfat Reported-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
Kees Cook authored
commit 5d26a105 upstream. This prefixes all crypto module loading with "crypto-" so we never run the risk of exposing module auto-loading to userspace via a crypto API, as demonstrated by Mathias Krause: https://lkml.org/lkml/2013/3/4/70Signed-off-by:
-
Johan Hovold authored
commit 41f632fe upstream. Remove bogus call to of_gpiochip_add (and of_gpio_chip remove in error path) which is also called when adding the gpio chip. This prevents adding the same pinctrl range twice. Fixes: 3f8c50c9 ("OF: pinctrl: MIPS: lantiq: implement lantiq/xway pinctrl support") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Pramod Gurav authored
commit 849a8c25 upstream. This patch releases gpiochip resources with of_gpiochip_remove and gpiochip_remove in failure cases. CC: John Crispin <blogic@openwrt.org> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by:
-
Andy Shevchenko authored
commit 4aaa7187 upstream. DMA mapped IO should be unmapped on the error path in probe() and unconditionally on remove(). Fixes: 62936009 ([libata] Add 460EX on-chip SATA driver, sata_dwc_460ex) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Joe Thornber authored
commit a59db676 upstream. Introduce a new variable to count the number of allocated migration structures. The existing variable cache->nr_migrations became overloaded. It was used to: i) track of the number of migrations in flight for the purposes of quiescing during suspend. ii) to estimate the amount of background IO occuring. Recent discard changes meant that REQ_DISCARD bios are processed with a migration. Discards are not background IO so nr_migrations was not incremented. However this could cause quiescing to complete early. (i) is now handled with a new variable cache->nr_allocated_migrations. cache->nr_migrations has been renamed cache->nr_io_migrations. cleanup_migration() is now called free_io_migration(), since it decrements that variable. Also, remove the unused cache->next_migration variable that got replaced with with prealloc_structs a while ago. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 9b1cc9f2 upstream. If a DM table is reloaded with an inactive table when the device is not suspended (normal procedure for LVM2), then there will be two dm-bufio objects that can diverge. This can lead to a situation where the inactive table uses bufio to read metadata at the same time the active table writes metadata -- resulting in the inactive table having stale metadata buffers once it is promoted to the active table slot. Fix this by using reference counting and a global list of cache metadata objects to ensure there is only one metadata object per metadata device. Signed-off-by:
-
Nadav Amit authored
commit f3747379 upstream. SYSENTER emulation is broken in several ways: 1. It misses the case of 16-bit code segments completely (CVE-2015-0239). 2. MSR_IA32_SYSENTER_CS is checked in 64-bit mode incorrectly (bits 0 and 1 can still be set without causing #GP). 3. MSR_IA32_SYSENTER_EIP and MSR_IA32_SYSENTER_ESP are not masked in legacy-mode. 4. There is some unneeded code. Fix it. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Alexandre Demers authored
commit 52045217 upstream. Many users see this message when booting without knowning that it is of no importance and that TSC calibration may have succeeded by another way. As explained by Paul Bolle in http://lkml.kernel.org/r/1348488259.1436.22.camel@x61.thuisdomein "Fast TSC calibration failed" should not be considered as an error since other calibration methods are being tried afterward. At most, those send a warning if they fail (not an error). So let's change the message from error to warning. [ tglx: Make if pr_info. It's really not important at all ] Fixes: c767a54b x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level> Signed-off-by:
Alexandre Demers <alexandre.f.demers@gmail.com> Link: http://lkml.kernel.org/r/1418106470-6906-1-git-send-email-alexandre.f.demers@gmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Bryan O'Donoghue authored
commit 38a1dfda upstream. Commit 0dbc6078 ('x86, build, pci: Fix PCI_MSI build on !SMP') introduced the dependency that X86_UP_APIC is only available when PCI_MSI is false. This effectively prevents PCI_MSI support on 32bit UP systems because it disables both APIC and IO-APIC. But APIC support is architecturally required for PCI_MSI. The intention of the patch was to enforce APIC support when PCI_MSI is enabled, but failed to do so. Remove the !PCI_MSI dependency from X86_UP_APIC and enforce X86_UP_APIC when PCI_MSI support is enabled on 32bit UP systems. [ tglx: Massaged changelog ] Fixes 0dbc6078 'x86, build, pci: Fix PCI_MSI build on !SMP' Signed-off-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Suggested-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: http://lkml.kernel.org/r/1421967529-9037-1-git-send-email-pure.logic@nexus-software.ieSigned-off-by:
-
Andy Lutomirski authored
commit 3669ef9f upstream. The Witcher 2 did something like this to allocate a TLS segment index: struct user_desc u_info; bzero(&u_info, sizeof(u_info)); u_info.entry_number = (uint32_t)-1; syscall(SYS_set_thread_area, &u_info); Strictly speaking, this code was never correct. It should have set read_exec_only and seg_not_present to 1 to indicate that it wanted to find a free slot without putting anything there, or it should have put something sensible in the TLS slot if it wanted to allocate a TLS entry for real. The actual effect of this code was to allocate a bogus segment that could be used to exploit espfix. The set_thread_area hardening patches changed the behavior, causing set_thread_area to return -EINVAL and crashing the game. This changes set_thread_area to interpret this as a request to find a free slot and to leave it empty, which isn't *quite* what the game expects but should be close enough to keep it working. In particular, using the code above to allocate two segments will allocate the same segment both times. According to FrostbittenKing on Github, this fixes The Witcher 2. If this somehow still causes problems, we could instead allocate a limit==0 32-bit data segment, but that seems rather ugly to me. Fixes: 41bdc785 x86/tls: Validate TLS entries to protect espfix Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/0cb251abe1ff0958b8e468a9a9a905b80ae3a746.1421954363.git.luto@amacapital.netSigned-off-by:
-
Andy Lutomirski authored
commit e30ab185 upstream. 32-bit programs don't have an lm bit in their ABI, so they can't reliably cause LDT_empty to return true without resorting to memset. They shouldn't need to do this. This should fix a longstanding, if minor, issue in all 64-bit kernels as well as a potential regression in the TLS hardening code. Fixes: 41bdc785 x86/tls: Validate TLS entries to protect espfix Signed-off-by:
-
Hans Verkuil authored
commit 6cf11ee6 upstream. The locking scheme inside the vb2 thread is unsafe when stopping the thread. In particular kthread_stop was called *after* internal data structures were cleaned up instead of doing that before. In addition, internal vb2 functions were called after threadio->stop was set to true and vb2_internal_streamoff was called. This is also not allowed. All this led to a variety of race conditions and kernel warnings and/or oopses. Fixed by moving the kthread_stop call up before the cleanup takes place, and by checking threadio->stop before calling internal vb2 queuing operations. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 32c6590d upstream. The Hyper-V clocksource is continuous; mark it accordingly. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Acked-by: jasowang@redhat.com Cc: gregkh@linuxfoundation.org Cc: devel@linuxdriverproject.org Cc: olaf@aepfle.de Cc: apw@canonical.com Link: http://lkml.kernel.org/r/1421108762-3331-1-git-send-email-kys@microsoft.comSigned-off-by:
-
Roger Tseng authored
commit b166010f upstream. sd_set_power_mode() in derived module drivers/mmc/host/rtsx_usb_sdmmc.c acquires dev_mutex and then calls pm_runtime_get_sync() to make sure the device is awake while initializing a newly inserted card. Once it is called during suspending state and explicitly before rtsx_usb_suspend() acquires the same dev_mutex, both routine deadlock and further hang the driver because pm_runtime_get_sync() waits the pending PM operations. Fix this by using an empty suspend method. mmc_core always turns the LED off after a request is done and thus it is ok to remove the only rtsx_usb_turn_off_led() here. Fixes: 730876be ("mfd: Add realtek USB card reader driver") Signed-off-by:
Roger Tseng <rogerable@realtek.com> [Lee: Removed newly unused variable] Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Felipe Balbi authored
commit f29ae369 upstream. If we don't tell regmap-irq that our first status register is at offset 1, it will try to read offset zero, which is the chipid register. Fixes: 44b4dc61 mfd: tps65218: Add driver for the TPS65218 PMIC Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Felipe Balbi authored
commit 773328da upstream. STATUS register can be modified by the HW, so we should bypass cache because of that. In the case of INT[12] registers, they are the ones that actually clear the IRQ source at the time they are read. If we rely on the cache for them, we will never be able to clear the interrupt, which will cause our IRQ line to be disabled due to IRQ throttling. Fixes: 44b4dc61 mfd: tps65218: Add driver for the TPS65218 PMIC Signed-off-by:
-
Jan Beulich authored
commit 4a0d3107 upstream. The mis-naming likely was a copy-and-paste effect. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/54B9408B0200007800055E8B@mail.emea.novell.comSigned-off-by:
-
Kees Cook authored
commit f285f4a2 upstream. On 64-bit, relocation is not required unless the load address gets changed. Without this, relocations do unexpected things when the kernel is above 4G. Reported-by:
Baoquan He <bhe@redhat.com> Signed-off-by:
Thomas D. <whissi@whissi.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Junjie Mao <eternal.n08@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20150116005146.GA4212@www.outflux.netSigned-off-by:
-
Fabio Estevam authored
commit 7ecd0bde upstream. Currently PWM functionality is broken on mx25 due to the wrong assignment of the PWM "per" clock. According to Documentation/devicetree/bindings/clock/imx25-clock.txt: pwm_ipg_per 52 ,so update the pwm "per" to use 'pwm_ipg_per' instead of 'per10' clock. With this change PWM can work fine on mx25. Reported-by:
Carlos Soto <csotoalonso@gmail.com> Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Andrew Lunn authored
commit 38bdf45f upstream. On Armada XP, 375 and 38x the MBus window 13 has the remap capability, like windows 0 to 7. However, the mvebu-mbus driver isn't currently taking into account this special case, which means that when window 13 is actually used, the remap registers are left to 0, making the device using this MBus window unavailable. As a minimal fix for stable, don't use window 13. A full fix will follow later. Fixes: fddddb52 ("bus: introduce an Marvell EBU MBus driver") Reviewed-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David Jeffery authored
commit ce751452 upstream. It is possible for ata_sff_flush_pio_task() to set ap->hsm_task_state to HSM_ST_IDLE in between the time __ata_sff_port_intr() checks for HSM_ST_IDLE and before it calls ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG(). This problem is hard to reproduce making this patch hard to verify, but this fix will prevent the race. I have not been able to reproduce the problem, but here is a crash dump from a 2.6.32 kernel. On examining the ata port's state, its hsm_task_state field has a value of HSM_ST_IDLE: crash> struct ata_port.hsm_task_state ffff881c1121c000 hsm_task_state = 0 Normally, this should not be possible as ata_sff_hsm_move() was called from ata_sff_host_intr(), which checks hsm_task_state and won't call ata_sff_hsm_move() if it has a HSM_ST_IDLE value. PID: 11053 TASK: ffff8816e846cae0 CPU: 0 COMMAND: "sshd" #0 [ffff88008ba03960] machine_kexec at ffffffff81038f3b #1 [ffff88008ba039c0] crash_kexec at ffffffff810c5d92 #2 [ffff88008ba03a90] oops_end at ffffffff8152b510 #3 [ffff88008ba03ac0] die at ffffffff81010e0b #4 [ffff88008ba03af0] do_trap at ffffffff8152ad74 #5 [ffff88008ba03b50] do_invalid_op at ffffffff8100cf95 #6 [ffff88008ba03bf0] invalid_op at ffffffff8100bf9b [exception RIP: ata_sff_hsm_move+317] RIP: ffffffff813a77ad RSP: ffff88008ba03ca0 RFLAGS: 00010097 RAX: 0000000000000000 RBX: ffff881c1121dc60 RCX: 0000000000000000 RDX: ffff881c1121dd10 RSI: ffff881c1121dc60 RDI: ffff881c1121c000 RBP: ffff88008ba03d00 R8: 0000000000000000 R9: 000000000000002e R10: 000000000001003f R11: 000000000000009b R12: ffff881c1121c000 R13: 0000000000000000 R14: 0000000000000050 R15: ffff881c1121dd78 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88008ba03d08] ata_sff_host_intr at ffffffff813a7fbd #8 [ffff88008ba03d38] ata_sff_interrupt at ffffffff813a821e #9 [ffff88008ba03d78] handle_IRQ_event at ffffffff810e6ec0 --- <IRQ stack> --- [exception RIP: pipe_poll+48] RIP: ffffffff81192780 RSP: ffff880f26d459b8 RFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff880f26d459c8 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff881a0539fa80 RBP: ffffffff8100bb8e R8: ffff8803b23324a0 R9: 0000000000000000 R10: ffff880f26d45dd0 R11: 0000000000000008 R12: ffffffff8109b646 R13: ffff880f26d45948 R14: 0000000000000246 R15: 0000000000000246 ORIG_RAX: ffffffffffffff10 CS: 0010 SS: 0018 RIP: 00007f26017435c3 RSP: 00007fffe020c420 RFLAGS: 00000206 RAX: 0000000000000017 RBX: ffffffff8100b072 RCX: 00007fffe020c45c RDX: 00007f2604a3f120 RSI: 00007f2604a3f140 RDI: 000000000000000d RBP: 0000000000000000 R8: 00007fffe020e570 R9: 0101010101010101 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffe020e5f0 R13: 00007fffe020e5f4 R14: 00007f26045f373c R15: 00007fffe020e5e0 ORIG_RAX: 0000000000000017 CS: 0033 SS: 002b Somewhere between the ata_sff_hsm_move() check and the ata_sff_host_intr() check, the value changed. On examining the other cpus to see what else was running, another cpu was running the error handler routines: PID: 326 TASK: ffff881c11014aa0 CPU: 1 COMMAND: "scsi_eh_1" #0 [ffff88008ba27e90] crash_nmi_callback at ffffffff8102fee6 #1 [ffff88008ba27ea0] notifier_call_chain at ffffffff8152d515 #2 [ffff88008ba27ee0] atomic_notifier_call_chain at ffffffff8152d57a #3 [ffff88008ba27ef0] notify_die at ffffffff810a154e #4 [ffff88008ba27f20] do_nmi at ffffffff8152b1db #5 [ffff88008ba27f50] nmi at ffffffff8152aaa0 [exception RIP: _spin_lock_irqsave+47] RIP: ffffffff8152a1ff RSP: ffff881c11a73aa0 RFLAGS: 00000006 RAX: 0000000000000001 RBX: ffff881c1121deb8 RCX: 0000000000000000 RDX: 0000000000000246 RSI: 0000000000000020 RDI: ffff881c122612d8 RBP: ffff881c11a73aa0 R8: ffff881c17083800 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff881c1121c000 R13: 000000000000001f R14: ffff881c1121dd50 R15: ffff881c1121dc60 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 --- <NMI exception stack> --- #6 [ffff881c11a73aa0] _spin_lock_irqsave at ffffffff8152a1ff #7 [ffff881c11a73aa8] ata_exec_internal_sg at ffffffff81396fb5 #8 [ffff881c11a73b58] ata_exec_internal at ffffffff81397109 #9 [ffff881c11a73bd8] atapi_eh_request_sense at ffffffff813a34eb Before it tried to acquire a spinlock, ata_exec_internal_sg() called ata_sff_flush_pio_task(). This function will set ap->hsm_task_state to HSM_ST_IDLE, and has no locking around setting this value. ata_sff_flush_pio_task() can then race with the interrupt handler and potentially set HSM_ST_IDLE at a fatal moment, which will trigger a kernel BUG. v2: Fixup comment in ata_sff_flush_pio_task() tj: Further updated comment. Use ap->lock instead of shost lock and use the [un]lock_irq variant instead of the irqsave/restore one. Signed-off-by:
David Milburn <dmilburn@redhat.com> Signed-off-by:
-
Michael Karcher authored
commit 1caf6aaa upstream. Compiling SH with gcc-4.8 fails due to the -m32 option not being supported. From http://buildd.debian-ports.org/status/fetch.php?pkg=linux&arch=sh4&ver=3.16.7-ckt4-1&stamp=1421425783 CC init/main.o gcc-4.8: error: unrecognized command line option '-m32' ld: cannot find init/.tmp_mc_main.o: No such file or directory objcopy: 'init/.tmp_mx_main.o': No such file rm: cannot remove 'init/.tmp_mx_main.o': No such file or directory rm: cannot remove 'init/.tmp_mc_main.o': No such file or directory Link: http://lkml.kernel.org/r/1421537778-29001-1-git-send-email-kernel@mkarcher.dialup.fu-berlin.de Link: http://lkml.kernel.org/r/54BCBDD4.10102@physik.fu-berlin.de Cc: Matt Fleming <matt@console-pimps.org> Reported-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Dan Williams authored
commit 72dd299d upstream. Ronny reports: https://bugzilla.kernel.org/show_bug.cgi?id=87101 "Since commit 8a4aeec8 "libata/ahci: accommodate tag ordered controllers" the access to the harddisk on the first SATA-port is failing on its first access. The access to the harddisk on the second port is working normal. When reverting the above commit, access to both harddisks is working fine again." Maintain tag ordered submission as the default, but allow sata_sil24 to continue with the old behavior. Cc: Tejun Heo <tj@kernel.org> Reported-by:
Ronny Hegewald <Ronny.Hegewald@online.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Brian King authored
commit 6cdb0817 upstream. Fixes a race condition in abort handling that was injected when multiple interrupt support was added. When only a single interrupt is present, the adapter guarantees it will send responses for aborted commands prior to the response for the abort command itself. With multiple interrupts, these responses generally come back on different interrupts, so we need to ensure the abort thread waits until the aborted command is complete so we don't perform a double completion. This race condition was being hit frequently in environments which were triggering command timeouts, which was resulting in a double completion causing a kernel oops. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Reviewed-by:
Wendy Xiong <wenxiong@linux.vnet.ibm.com> Tested-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Al Viro authored
commit 378ff1a5 upstream. It really needs to check that src is non-directory *and* use {un,}lock_two_nodirectories(). As it is, it's trivial to cause double-lock (ioctl(fd, CIFS_IOC_COPYCHUNK_FILE, fd)) and if the last argument is an fd of directory, we are asking for trouble by violating the locking order - all directories go before all non-directories. If the last argument is an fd of parent directory, it has 50% odds of locking child before parent, which will cause AB-BA deadlock if we race with unlink(). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jason Lee Cragg authored
commit 64559311 upstream. Signed-off-by:
Jason Lee Cragg <jcragg@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Thomas Petazzoni authored
commit 8f1e8ee2 upstream. The current hardware I/O coherency is known to cause problems with DMA coherent buffers, as it still requires explicit I/O synchronization barriers, which is not compatible with the semantics expected by the Linux DMA coherent buffers API. So, in order to have enough time to validate a new solution based on automatic I/O synchronization barriers, this commit disables hardware I/O coherency entirely. Future patches will re-enable it. Signed-off-by:
-
