- 07 Apr, 2009 40 commits
-
-
Erik Andr?n authored
ov9650: Reading the COM1 register corrupts the image. Decrease the granularity of the exposure and limit its upper range as setting such high values doesn't have any effect on the image. Signed-off-by:
Erik Andr?n <erik.andren@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Erik Andr?n authored
Signed-off-by:
-
Erik Andr?n authored
Autogain is on by default, properly set the default value in the v4l2 ctrl. Signed-off-by:
-
Erik Andr?n authored
Signed-off-by:
-
Erik Andr?n authored
Remove an unused sd struct member. Remove a redundant define while we're at it. Signed-off-by:
-
Erik Andr?n authored
Move over the v4l2 controls to the sensor specific source file. Remove the now redundant sensor struct member. Signed-off-by:
-
Erik Andr?n authored
By separating the supported for each sensor into a separate vector we can eliminate the nmodes variable and instead calculate it at runtime. Signed-off-by:
-
Erik Andr?n authored
Signed-off-by:
-
Erik Andr?n authored
Previously, all sensors allocated a part of a large ctrl vector. Define this vector separately for each sensor instead. Signed-off-by:
-
Erik Andr?n authored
This is a hack preventing a suspend-to-ram/disk regression. Signed-off-by:
-
Erik Andr?n authored
In order to save energy, put the sensor in soft sleep mode when not active Signed-off-by:
-
Lukas Karas authored
This patch toggles the led seen on many laptops having a m5602 connected to a Samsung s5k83a sensor. Signed-off-by:
Lukas Karas <lukas.karas@centrum.cz> Signed-off-by:
-
Erik Andr?n authored
Cleans some unnecessary temporary variable usage in the ov9650 start function. Signed-off-by:
-
Erik Andr?n authored
Adds QCIF support for the ov9650 sensor Signed-off-by:
-
Erik Andr?n authored
Simplfy error handling by replacing goto statements with return equivalents. Signed-off-by:
-
Erik Andr?n authored
Signed-off-by:
-
Erik Andr?n authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Stefan Richter authored
Commit 34aecd28 was made obsolete and invalid by commit 40cf65d1. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
David Wong authored
V4L/DVB (11398): Support for Legend Silicon LGS8913/LGS8GL5/LGS8GXX China DMB-TH digital demodulator This patch contains the unified driver for Legend Silicon LGS8913 and LGS8GL5. It should replace lgs8gl5.c in media/dvb/frontends in the future. Signed-off-by:
David T.L. Wong <davidtlwong@gmail.com> Signed-off-by:
-
Alexey Klimov authored
Patch fixes cleanup procedure in si470x_usb_driver_probe. Add new label err_video and change order of freeing memory. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Signed-off-by:
-
Dean Anderson authored
This patch fixes kfree problem on driver removal, fixes streamoff problem and removes unnecessary videobuf_waiton from free_buffer function. Signed-off-by:
Dean Anderson <dean@sensoray.com> Signed-off-by:
-
Geert Uytterhoeven authored
linux-dvb@linuxtv.org auto-responds with: | This ML is deprecated. Please use linux-media@vger.kernel.org instead. | For more info about linux-media@vger.kernel.org, please read: | http://vger.kernel.org/vger-lists.html#linux-media Hence remove it from MAINTAINERS. There are still a few references to it in various docs and source files With kind regards, Geert Uytterhoeven Software Architect Sony Techsoft Centre Europe The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium Phone: +32 (0)2 700 8453 Fax: +32 (0)2 700 8622 E-mail: Geert.Uytterhoeven@sonycom.com Internet: http://www.sony-europe.com/ A division of Sony Europe (Belgium) N.V. VAT BE 0413.825.160 · RPR Brussels Fortis · BIC GEBABEBB · IBAN BE41293037680010 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlSigned-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
-
Alexey Klimov authored
Patch removes empty open and release functions in pci and isa radio drivers, setting them to NULL. V4L module doesn't call for them due to previous patch. Signed-off-by:
-
Hans Verkuil authored
Patch allows v4l2_open and v4l2_release functions return 0 if open and release driver callbacks set to NULL. This will be used in radio drivers. -- Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Adam Baker authored
Add support to the SQ-905 driver to pass back to user space the sensor orientation information obtained from the camera during init. Modifies gspca and the videodev2.h header to create the necessary API. [mchehab@redhat.com: Changed "Output is" to "Frames are" at the comments, as suggested at LMML] Signed-off-by:
Adam Baker <linux@baker-net.org.uk> Signed-off-by:
-
Matthias Schwarzott authored
Thanks to panagonov <panagonov@mail.bg> for requesting support and testing patches. Signed-off-by:
Matthias Schwarzott <zzam@gentoo.org> Signed-off-by:
-
Hans Verkuil authored
Remove support for the debug call VIDIOC_INT_S_AUDIO_ROUTING from cx18 and ivtv. These internal ioctls shouldn't be exposed. These were only used through the cx18-ctl and ivtv-ctl utilities, and only when testing a new card variant. This cleanup allows the removal of this ioctl from v4l2-common.h. Cc: Andy Walls <awalls@radix.net> Signed-off-by:
-
Hans Verkuil authored
It is no longer needed to use a struct pointer as argument, since v4l2_subdev doesn't require that ioctl-like approach anymore. Instead just pass the input, output and config (new!) arguments directly. Signed-off-by:
-
Hans Verkuil authored
The line-in was muted twice instead of the line-in and the cd-in. Signed-off-by:
-
Hans Verkuil authored
With all the v4l2_subdev changes that were made to these drivers it is a good idea to increase the version number of each driver. It's just the patch level that is increased, except for the zoran and saa7146 drivers where the minor number was increased due to the more substantial changes that were made to those two drivers. Signed-off-by:
-
Hans Verkuil authored
Rather than duplicating this list everywhere, just put it in tvaudio.h. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
The functions v4l2_i2c_new_subdev and v4l2_i2c_new_probed_subdev relied on i2c_get_adapdata to return the v4l2_device. However, this is not always possible on embedded platforms. So modify the API to pass the v4l2_device pointer explicitly. Signed-off-by:
-
Hans Verkuil authored
Add utility function to probe for a single address, rather than a list of addresses. Signed-off-by:
-
Hans Verkuil authored
Originally the intention was to switch to the new style i2c API starting with the introduction of the API in 2.6.22. However, the i2c_new_probed_device() function has a lethal bug that wasn't fixed until 2.6.25. Or more accurately, it was only fixed in the stable series of 2.6.25 and 2.6.26. Given the fact that the new i2c API also changed starting with 2.6.26 (the addition of i2c_device_id), it is easiest to switch APIs starting with 2.6.26. This patch updates all the legacy code accordingly. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by:
-
Hans Verkuil authored
The init callback was used in several places to load firmware. Make a separate load_fw callback for that. This makes the code a lot more understandable. Signed-off-by:
-
Hans Verkuil authored
s_standby is only used to put the tuner in powersaving mode, so move it from core to tuner. Signed-off-by:
-
