- 30 Apr, 2015 36 commits
-
-
Kim Phillips authored
commit b8865767 upstream. A userspace process can map device MMIO memory via VFIO or /dev/mem, e.g., for platform device passthrough support in QEMU. During early development, we found the PAGE_S2 memory type being used for MMIO mappings. This patch corrects that by using the more strongly ordered memory type for device MMIO mappings: PAGE_S2_DEVICE. Signed-off-by:
Kim Phillips <kim.phillips@linaro.org> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Eric Auger authored
commit df6ce24f upstream. Currently when a KVM region is deleted or moved after KVM_SET_USER_MEMORY_REGION ioctl, the corresponding intermediate physical memory is not unmapped. This patch corrects this and unmaps the region's IPA range in kvm_arch_commit_memory_region using unmap_stage2_range. Signed-off-by:
Eric Auger <eric.auger@linaro.org> Signed-off-by:
-
Christoffer Dall authored
commit 4f853a71 upstream. unmap_range() was utterly broken, to quote Marc, and broke in all sorts of situations. It was also quite complicated to follow and didn't follow the usual scheme of having a separate iterating function for each level of page tables. Address this by refactoring the code and introduce a pgd_clear() function. Reviewed-by:
Jungseok Lee <jays.lee@samsung.com> Reviewed-by:
Mario Smarduch <m.smarduch@samsung.com> Acked-by:
-
Will Deacon authored
commit 63afbe7a upstream. If the physical address of GICV isn't page-aligned, then we end up creating a stage-2 mapping of the page containing it, which causes us to map neighbouring memory locations directly into the guest. As an example, consider a platform with GICV at physical 0x2c02f000 running a 64k-page host kernel. If qemu maps this into the guest at 0x80010000, then guest physical addresses 0x80010000 - 0x8001efff will map host physical region 0x2c020000 - 0x2c02efff. Accesses to these physical regions may cause UNPREDICTABLE behaviour, for example, on the Juno platform this will cause an SError exception to EL3, which brings down the entire physical CPU resulting in RCU stalls / HYP panics / host crashing / wasted weeks of debugging. SBSA recommends that systems alias the 4k GICV across the bounding 64k region, in which case GICV physical could be described as 0x2c020000 in the above scenario. This patch fixes the problem by failing the vgic probe if the physical base address or the size of GICV aren't page-aligned. Note that this generated a warning in dmesg about freeing enabled IRQs, so I had to move the IRQ enabling later in the probe. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Joel Schopp <joel.schopp@amd.com> Cc: Don Dutile <ddutile@redhat.com> Acked-by:
Peter Maydell <peter.maydell@linaro.org> Acked-by:
Joel Schopp <joel.schopp@amd.com> Acked-by:
-
Will Deacon authored
commit ee9e101c upstream. In order to ensure completion of inner-shareable maintenance instructions (cache and TLB) on AArch64, we can use the -ish suffix to the dsb instruction. This patch relaxes our dsb sy instructions to dsb ish where possible. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
-
Haibin Wang authored
commit 30c21170 upstream. Currently below check in vgic_ioaddr_overlap will always succeed, because the vgic dist base and vgic cpu base are still kept UNDEF after initialization. The code as follows will be return forever. if (IS_VGIC_ADDR_UNDEF(dist) || IS_VGIC_ADDR_UNDEF(cpu)) return 0; So, before invoking the vgic_ioaddr_overlap, it needs to set the corresponding base address firstly. Signed-off-by:
Haibin Wang <wanghaibin.wang@huawei.com> Acked-by:
-
Andre Przywara authored
commit f2ae85b2 upstream. Since KVM internally represents the ICFGR registers by stuffing two of them into one word, the offset for accessing the internal representation and the one for the MMIO based access are different. So keep the original offset around, but adjust the internal array offset by one bit. Reported-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
-
Will Deacon authored
commit 4e4468fa upstream. KVM currently crashes and burns on big-endian hosts, so don't allow it to be selected until we've got that fixed. Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit 6cbde825 upstream. Add a stub for kvm_vgic_addr when compiling without CONFIG_KVM_ARM_VGIC. The usefulness of this configurarion is extremely doubtful, but let's fix it anyway (until we decide that we'll always support a VGIC). Reported-by:
Michele Paolino <m.paolino@virtualopensystems.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Marc Zyngier authored
commit 8034699a upstream. In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by:
-
Marc Zyngier authored
commit af20814e upstream. HCR.TVM traps (among other things) accesses to AMAIR0 and AMAIR1. In order to minimise the amount of surprise a guest could generate by trying to access these registers with caches off, add them to the list of registers we switch/handle. Signed-off-by:
-
Marc Zyngier authored
commit ac30a11e upstream. So far, KVM/ARM used a fixed HCR configuration per guest, except for the VI/VF/VA bits to control the interrupt in absence of VGIC. With the upcoming need to dynamically reconfigure trapping, it becomes necessary to allow the HCR to be changed on a per-vcpu basis. The fix here is to mimic what KVM/arm64 already does: a per vcpu HCR field, initialized at setup time. Signed-off-by:
-
Marc Zyngier authored
commit 547f7813 upstream. Commit 240e99cb (ARM: KVM: Fix 64-bit coprocessor handling) added an ordering dependency for the 64bit registers. The order described is: CRn, CRm, Op1, Op2, 64bit-first. Unfortunately, the implementation is: CRn, 64bit-first, CRm... Move the 64bit test to be last in order to match the documentation. Signed-off-by:
-
Marc Zyngier authored
commit 46c214dd upstream. Commit 240e99cb (ARM: KVM: Fix 64-bit coprocessor handling) changed the way we match the 64bit coprocessor access from user space, but didn't update the trap handler for the same set of registers. The effect is that a trapped 64bit access is never matched, leading to a fault being injected into the guest. This went unnoticed as we didn't really trap any 64bit register so far. Placing the CRm field of the access into the CRn field of the matching structure fixes the problem. Also update the debug feature to emit the expected string in case of failing match. Signed-off-by:
-
Marc Zyngier authored
commit 15979300 upstream. In order for a guest with caches disabled to observe data written contained in a given page, we need to make sure that page is committed to memory, and not just hanging in the cache (as guest accesses are completely bypassing the cache until it decides to enable it). For this purpose, hook into the coherent_cache_guest_page function and flush the region if the guest SCTLR register doesn't show the MMU and caches as being enabled. Signed-off-by:
-
Marc Zyngier authored
commit 9d218a1f upstream. When the guest runs with caches disabled (like in an early boot sequence, for example), all the writes are diectly going to RAM, bypassing the caches altogether. Once the MMU and caches are enabled, whatever sits in the cache becomes suddenly visible, which isn't what the guest expects. A way to avoid this potential disaster is to invalidate the cache when the MMU is being turned on. For this, we hook into the SCTLR_EL1 trapping code, and scan the stage-2 page tables, invalidating the pages/sections that have already been mapped in. Signed-off-by:
-
Marc Zyngier authored
commit a3c8bd31 upstream. The use of p*d_addr_end with stage-2 translation is slightly dodgy, as the IPA is 40bits, while all the p*d_addr_end helpers are taking an unsigned long (arm64 is fine with that as unligned long is 64bit). The fix is to introduce 64bit clean versions of the same helpers, and use them in the stage-2 page table code. Signed-off-by:
-
Marc Zyngier authored
commit 4d44923b upstream. In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by:
-
Marc Zyngier authored
commit 2072d29c upstream. The current handling of AArch32 trapping is slightly less than perfect, as it is not possible (from a handler point of view) to distinguish it from an AArch64 access, nor to tell a 32bit from a 64bit access either. Fix this by introducing two additional flags: - is_aarch32: true if the access was made in AArch32 mode - is_32bit: true if is_aarch32 == true and a MCR/MRC instruction was used to perform the access (as opposed to MCRR/MRRC). This allows a handler to cover all the possible conditions in which a system register gets trapped. Signed-off-by:
-
Marc Zyngier authored
commit 2d58b733 upstream. In order for the guest with caches off to observe data written contained in a given page, we need to make sure that page is committed to memory, and not just hanging in the cache (as guest accesses are completely bypassing the cache until it decides to enable it). For this purpose, hook into the coherent_icache_guest_page function and flush the region if the guest SCTLR_EL1 register doesn't show the MMU and caches as being enabled. The function also get renamed to coherent_cache_guest_page. Signed-off-by:
-
Marc Zyngier authored
commit b20c9f29 upstream. Commit 1fcf7ce0 (arm: kvm: implement CPU PM notifier) added support for CPU power-management, using a cpu_notifier to re-init KVM on a CPU that entered CPU idle. The code assumed that a CPU entering idle would actually be powered off, loosing its state entierely, and would then need to be reinitialized. It turns out that this is not always the case, and some HW performs CPU PM without actually killing the core. In this case, we try to reinitialize KVM while it is still live. It ends up badly, as reported by Andre Przywara (using a Calxeda Midway): [ 3.663897] Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x685760 [ 3.663897] unexpected data abort in Hyp mode at: 0xc067d150 [ 3.663897] unexpected HVC/SVC trap in Hyp mode at: 0xc0901dd0 The trick here is to detect if we've been through a full re-init or not by looking at HVBAR (VBAR_EL2 on arm64). This involves implementing the backend for __hyp_get_vectors in the main KVM HYP code (rather small), and checking the return value against the default one when the CPU notifier is called on CPU_PM_EXIT. Reported-by:
Andre Przywara <osp@andrep.de> Tested-by:
-
Lorenzo Pieralisi authored
commit 1fcf7ce0 upstream. Upon CPU shutdown and consequent warm-reboot, the hypervisor CPU state must be re-initialized. This patch implements a CPU PM notifier that upon warm-boot calls a KVM hook to reinitialize properly the hypervisor state so that the CPU can be safely resumed. Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Sachin Kamat authored
commit 61466710 upstream. trace.h was included twice. Remove duplicate inclusion. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Christoffer Dall authored
commit 478a8237 upstream. The current KVM implementation of PSCI returns INVALID_PARAMETERS if the waitqueue for the corresponding CPU is not active. This does not seem correct, since KVM should not care what the specific thread is doing, for example, user space may not have called KVM_RUN on this VCPU yet or the thread may be busy looping to user space because it received a signal; this is really up to the user space implementation. Instead we should check specifically that the CPU is marked as being turned off, regardless of the VCPU thread state, and if it is, we shall simply clear the pause flag on the CPU and wake up the thread if it happens to be blocked for us. Further, the implementation seems to be racy when executing multiple VCPU threads. There really isn't a reasonable user space programming scheme to ensure all secondary CPUs have reached kvm_vcpu_first_run_init before turning on the boot CPU. Therefore, set the pause flag on the vcpu at VCPU init time (which can reasonably be expected to be completed for all CPUs by user space before running any VCPUs) and clear both this flag and the feature (in case the feature can somehow get set again in the future) and ping the waitqueue on turning on a VCPU using PSCI. Reported-by:
-
Anup Patel authored
commit e5cf9dcd upstream. The SMC-based PSCI emulation for Guest is going to be very different from the in-kernel HVC-based PSCI emulation hence for now just inject undefined exception when Guest executes SMC instruction. Signed-off-by:
Anup Patel <anup.patel@linaro.org> Signed-off-by:
Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by:
-
Christoffer Dall authored
commit e9b152cb upstream. The arch-generic KVM code expects the cpu field of a vcpu to be -1 if the vcpu is no longer assigned to a cpu. This is used for the optimized make_all_cpus_request path and will be used by the vgic code to check that no vcpus are running. Acked-by:
-
Christoffer Dall authored
commit e1ba0207 upstream. Rework the VGIC initialization slightly to allow initialization of the vgic cpu-specific state even if the irqchip (the VGIC) hasn't been created by user space yet. This is safe, because the vgic data structures are already allocated when the CPU is allocated if VGIC support is compiled into the kernel. Further, the init process does not depend on any other information and the sacrifice is a slight performance degradation for creating VMs in the no-VGIC case. The reason is that the new device control API doesn't mandate creating the VGIC before creating the VCPU and it is unreasonable to require user space to create the VGIC before creating the VCPUs. At the same time move the irqchip_in_kernel check out of kvm_vcpu_first_run_init and into the init function to make the per-vcpu and global init functions symmetric and add comments on the exported functions making it a bit easier to understand the init flow by only looking at vgic.c. Acked-by:
-
Christoffer Dall authored
commit a1a64387 upstream. Initialize the cntvoff at kvm_init_vm time, not before running the VCPUs at the first time because that will overwrite any potentially restored values from user space. Cc: Andre Przywara <andre.przywara@linaro.org> Acked-by:
-
Marc Zyngier authored
commit d241aac7 upstream. On an (even slightly) oversubscribed system, spinlocks are quickly becoming a bottleneck, as some vcpus are spinning, waiting for a lock to be released, while the vcpu holding the lock may not be running at all. The solution is to trap blocking WFEs and tell KVM that we're now spinning. This ensures that other vpus will get a scheduling boost, allowing the lock to be released more quickly. Also, using CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT slightly improves the performance when the VM is severely overcommited. Acked-by:
-
Marc Zyngier authored
commit 79c64880 upstream. The KVM PSCI code blindly assumes that vcpu_id and MPIDR are the same thing. This is true when vcpus are organized as a flat topology, but is wrong when trying to emulate any other topology (such as A15 clusters). Change the KVM PSCI CPU_ON code to look at the MPIDR instead of the vcpu_id to pick a target CPU. Signed-off-by:
-
Marc Zyngier authored
commit 9cbb6d96 upstream. The L2CTLR register contains the number of CPUs in this cluster. Make sure the register content is actually relevant to the vcpu that is being configured by computing the number of cores that are part of its cluster. Signed-off-by:
-
Christoffer Dall authored
commit 82ea046c upstream. Update comments to reflect what is really going on and add the TWE bit to the comments in kvm_arm.h. Also renames the function to kvm_handle_wfx like is done on arm64 for consistency and uber-correctness. Signed-off-by:
-
Marc Zyngier authored
commit 2d1d841b upstream. In order to be able to support more than 4 A7 or A15 CPUs, we need to fix the MPIDR computing to reflect the fact that both A15 and A7 can only exist in clusters of at most 4 CPUs. Fix the MPIDR computing to allow virtual clusters to be exposed to the guest. Signed-off-by:
-
Marc Zyngier authored
commit 1f558098 upstream. On an (even slightly) oversubscribed system, spinlocks are quickly becoming a bottleneck, as some vcpus are spinning, waiting for a lock to be released, while the vcpu holding the lock may not be running at all. This creates contention, and the observed slowdown is 40x for hackbench. No, this isn't a typo. The solution is to trap blocking WFEs and tell KVM that we're now spinning. This ensures that other vpus will get a scheduling boost, allowing the lock to be released more quickly. Also, using CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT slightly improves the performance when the VM is severely overcommited. Quick test to estimate the performance: hackbench 1 process 1000 2xA15 host (baseline): 1.843s 2xA15 guest w/o patch: 2.083s 4xA15 guest w/o patch: 80.212s 8xA15 guest w/o patch: Could not be bothered to find out 2xA15 guest w/ patch: 2.102s 4xA15 guest w/ patch: 3.205s 8xA15 guest w/ patch: 6.887s So we go from a 40x degradation to 1.5x in the 2x overcommit case, which is vaguely more acceptable. Signed-off-by:
-
Jonathan Austin authored
commit 5e497046 upstream. The T{0,1}SZ fields of TTBCR are 3 bits wide when using the long descriptor format. Likewise, the T0SZ field of the HTCR is 3-bits. KVM currently defines TTBCR_T{0,1}SZ as 3, not 7. The T0SZ mask is used to calculate the value for the HTCR, both to pick out TTBCR.T0SZ and mask off the equivalent field in the HTCR during read-modify-write. The incorrect mask size causes the (UNKNOWN) reset value of HTCR.T0SZ to leak in to the calculated HTCR value. Linux will hang when initializing KVM if HTCR's reset value has bit 2 set (sometimes the case on A7/TC2) Fixing T0SZ allows A7 cores to boot and T1SZ is also fixed for completeness. Signed-off-by:
Jonathan Austin <jonathan.austin@arm.com> Acked-by:
-
Jonathan Austin authored
commit 1158fca4 upstream. KVM does not have a notion of multiple clusters for CPUs, just a linear array of CPUs. When using a system with cores in more than one cluster, the current method for calculating the virtual MPIDR will leak the (physical) cluster information into the virtual MPIDR. One effect of this is that Linux under KVM fails to boot multiple CPUs that aren't in the 0th cluster. This patch does away with exposing the real MPIDR fields in favour of simply using the virtual CPU number (but preserving the U bit, as before). Signed-off-by:
-
- 27 Apr, 2015 4 commits
-
-
Jiri Slaby authored
-
Rainer Koenig authored
commit 47c1ffb2 upstream. Add two more Fujitsu LIFEBOOK models that also ship with the Elantech touchpad and don't work with crc_disabled to the quirk list. Signed-off-by:
Rainer Koenig <Rainer.Koenig@ts.fujitsu.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Ulrik De Bie authored
commit 0dc15879 upstream. The Fujitsu H730 does not work with crc_enabled = 0, even though the crc_enabled bit in the firmware version indicated it would. When switching this value to crc_enabled to 1, the touchpad works. This patch uses DMI to detect H730. Reported-by:
Stefan Valouch <stefan@valouch.com> Tested-by:
Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by:
Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 05fbf357 upstream. Lockless access to pte in pagemap_pte_range() might race with page migration and trigger BUG_ON(!PageLocked()) in migration_entry_to_page(): CPU A (pagemap) CPU B (migration) lock_page() try_to_unmap(page, TTU_MIGRATION...) make_migration_entry() set_pte_at() <read *pte> pte_to_pagemap_entry() remove_migration_ptes() unlock_page() if(is_migration_entry()) migration_entry_to_page() BUG_ON(!PageLocked(page)) Also lockless read might be non-atomic if pte is larger than wordsize. Other pte walkers (smaps, numa_maps, clear_refs) already lock ptes. Fixes: 052fb0d6 ("proc: report file/anon bit in /proc/pid/pagemap") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reported-by:
Andrey Ryabinin <a.ryabinin@samsung.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> [3.5+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
