1. 28 Jun, 2017 4 commits
  2. 24 Jun, 2017 10 commits
  3. 23 Jun, 2017 13 commits
  4. 22 Jun, 2017 11 commits
    • Randy Dunlap's avatar
      kconfig: fix sparse warnings in nconfig · ad818106
      Randy Dunlap authored
      Fix sparse warnings in scripts/kconfig/nconf* ('make nconfig'):
      
      ../scripts/kconfig/nconf.c:1071:32: warning: Using plain integer as NULL pointer
      ../scripts/kconfig/nconf.c:1238:30: warning: Using plain integer as NULL pointer
      ../scripts/kconfig/nconf.c:511:51: warning: Using plain integer as NULL pointer
      ../scripts/kconfig/nconf.c:1460:6: warning: symbol 'setup_windows' was not declared. Should it be static?
      ../scripts/kconfig/nconf.c:274:12: warning: symbol 'current_instructions' was not declared. Should it be static?
      ../scripts/kconfig/nconf.c:308:22: warning: symbol 'function_keys' was not declared. Should it be static?
      ../scripts/kconfig/nconf.gui.c:132:17: warning: non-ANSI function declaration of function 'set_colors'
      ../scripts/kconfig/nconf.gui.c:195:24: warning: Using plain integer as NULL pointer
      
      nconf.gui.o before/after files are the same.
      nconf.o before/after files are the same until the 'static' function
      declarations are added.
      Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
      Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      ad818106
    • Linus Torvalds's avatar
      Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 · a38371cb
      Linus Torvalds authored
      Pull cifs fixes from Steve French:
       "Various small fixes for stable"
      
      * 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
        CIFS: Fix some return values in case of error in 'crypt_message'
        cifs: remove redundant return in cifs_creation_time_get
        CIFS: Improve readdir verbosity
        CIFS: check if pages is null rather than bv for a failed allocation
        CIFS: Set ->should_dirty in cifs_user_readv()
      a38371cb
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · 3f7ba7e1
      Linus Torvalds authored
      Pull KVM fixes from Radim Krčmář:
       "MIPS:
         - Fix build with KVM, DYNAMIC_DEBUG and JUMP_LABEL.
      
        PPC:
         - Fix host crashes/hangs on POWER9.
         - Properly restore userspace state after KVM_RUN ioctl.
      
        s390:
         - Fix address translation in odd-ball cases (real-space designation
           ASCEs).
      
        x86:
         - Fix privilege escalation in 64-bit Windows guests
      
        All patches are for stable and the x86 also has a CVE"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
        KVM: x86: fix singlestepping over syscall
        KVM: s390: gaccess: fix real-space designation asce handling for gmap shadows
        KVM: MIPS: Fix maybe-uninitialized build failure
        KVM: PPC: Book3S HV: Ignore timebase offset on POWER9 DD1
        KVM: PPC: Book3S HV: Save/restore host values of debug registers
        KVM: PPC: Book3S HV: Preserve userspace HTM state properly
        KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exit
        KVM: PPC: Book3S HV: Context-switch EBB registers properly
        KVM: PPC: Book3S HV: Cope with host using large decrementer mode
      3f7ba7e1
    • Linus Torvalds's avatar
      Merge tag 'mfd-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd · 4f92f0e2
      Linus Torvalds authored
      Pull MFD fixes from Lee Jones:
      
       - arizona: use address passed in, rather than hard coded value
      
       - correct STM32 clock-names value in DT binding documentation
      
      * tag 'mfd-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
        dt-bindings: mfd: Update STM32 timers clock names
        mfd: arizona: Fix typo using hard-coded register
      4f92f0e2
    • Paolo Bonzini's avatar
      KVM: x86: fix singlestepping over syscall · c8401dda
      Paolo Bonzini authored
      TF is handled a bit differently for syscall and sysret, compared
      to the other instructions: TF is checked after the instruction completes,
      so that the OS can disable #DB at a syscall by adding TF to FMASK.
      When the sysret is executed the #DB is taken "as if" the syscall insn
      just completed.
      
      KVM emulates syscall so that it can trap 32-bit syscall on Intel processors.
      Fix the behavior, otherwise you could get #DB on a user stack which is not
      nice.  This does not affect Linux guests, as they use an IST or task gate
      for #DB.
      
      This fixes CVE-2017-7518.
      
      Cc: stable@vger.kernel.org
      Reported-by: default avatarAndy Lutomirski <luto@kernel.org>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      Signed-off-by: default avatarRadim Krčmář <rkrcmar@redhat.com>
      c8401dda
    • Radim Krčmář's avatar
      Merge tag 'kvm-s390-master-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux · d6aa07c1
      Radim Krčmář authored
      KVM: s390: fix shadow table handling for nested guests
      
      Some odd-ball cases (real-space designation ASCEs) are handled wrong
      for the shadow page tables. Fix it.
      d6aa07c1
    • Alistair Popple's avatar
      powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD · bbd5ff50
      Alistair Popple authored
      NPU2 requires an extra explicit flush to an active GPU PID when
      sending address translation shoot downs (ATSDs) to reliably flush the
      GPU TLB. This patch adds just such a flush at the end of each sequence
      of ATSDs.
      
      We can safely use PID 0 which is always reserved and active on the
      GPU. PID 0 is only used for init_mm which will never be a user mm on
      the GPU. To enforce this we add a check in pnv_npu2_init_context()
      just in case someone tries to use PID 0 on the GPU.
      Signed-off-by: default avatarAlistair Popple <alistair@popple.id.au>
      [mpe: Use true/false for bool literals]
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      bbd5ff50
    • Heiko Carstens's avatar
      KVM: s390: gaccess: fix real-space designation asce handling for gmap shadows · addb63c1
      Heiko Carstens authored
      For real-space designation asces the asce origin part is only a token.
      The asce token origin must not be used to generate an effective
      address for storage references. This however is erroneously done
      within kvm_s390_shadow_tables().
      
      Furthermore within the same function the wrong parts of virtual
      addresses are used to generate a corresponding real address
      (e.g. the region second index is used as region first index).
      
      Both of the above can result in incorrect address translations. Only
      for real space designations with a token origin of zero and addresses
      below one megabyte the translation was correct.
      
      Furthermore replace a "!asce.r" statement with a "!*fake" statement to
      make it more obvious that a specific condition has nothing to do with
      the architecture, but with the fake handling of real space designations.
      
      Fixes: 3218f709 ("s390/mm: support real-space for gmap shadows")
      Cc: David Hildenbrand <david@redhat.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
      Reviewed-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
      Signed-off-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
      addb63c1
    • Michail Georgios Etairidis's avatar
      i2c: imx: Use correct function to write to register · 6c782a5e
      Michail Georgios Etairidis authored
      The i2c-imx driver incorrectly uses readb()/writeb() to read and
      write to the appropriate registers when performing a repeated start.
      The appropriate imx_i2c_read_reg()/imx_i2c_write_reg() functions
      should be used instead. Performing a repeated start results in
      a kernel panic. The platform is imx.
      Signed-off-by: default avatarMichail G Etairidis <m.etairidis@beck-ipc.com>
      Fixes: ce1a7884 ("i2c: imx: add DMA support for freescale i2c driver")
      Fixes: 054b62d9 ("i2c: imx: fix the i2c bus hang issue when do repeat restart")
      Acked-by: default avatarFugang Duan <fugang.duan@nxp.com>
      Acked-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      6c782a5e
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.dk/linux-block · 8d829b9b
      Linus Torvalds authored
      Pull block fixes from Jens Axboe:
       "This contains a set of fixes for xen-blkback by way of Konrad, and a
        performance regression fix for blk-mq for shared tags.
      
        The latter could account for as much as a 50x reduction in
        performance, with the test case from the user with 500 name spaces. A
        more realistic setup on my end with 32 drives showed a 3.5x drop. The
        fix has been thoroughly tested before being committed"
      
      * 'for-linus' of git://git.kernel.dk/linux-block:
        blk-mq: fix performance regression with shared tags
        xen-blkback: don't leak stack data via response ring
        xen/blkback: don't use xen_blkif_get() in xen-blkback kthread
        xen/blkback: don't free be structure too early
        xen/blkback: fix disconnect while I/Os in flight
      8d829b9b
    • Darrick J. Wong's avatar
      xfs: don't allow bmap on rt files · eb5e248d
      Darrick J. Wong authored
      bmap returns a dumb LBA address but not the block device that goes with
      that LBA.  Swapfiles don't care about this and will blindly assume that
      the data volume is the correct blockdev, which is totally bogus for
      files on the rt subvolume.  This results in the swap code doing IOs to
      arbitrary locations on the data device(!) if the passed in mapping is a
      realtime file, so just turn off bmap for rt files.
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      eb5e248d
  5. 21 Jun, 2017 2 commits
    • Richard Genoud's avatar
      kbuild: fix header installation under fakechroot environment · 2f263d14
      Richard Genoud authored
      Since commit fcc8487d ("uapi: export all headers under uapi
      directories") fakechroot make bindeb-pkg fails, mismatching files for
      directories:
      touch: cannot touch 'usr/include/video/uvesafb.h/.install': Not a
      directory
      
      This due to a bug in fakechroot:
      when using the function $(wildcard $(srcdir)/*/.) in a makefile, under a
      fakechroot environment, not only directories but also files are
      returned.
      
      To circumvent that, we are using the functions:
      $(sort $(dir $(wildcard $(srcdir)/*/))))
      
      Fixes: fcc8487d ("uapi: export all headers under uapi directories")
      Signed-off-by: default avatarRichard Genoud <richard.genoud@gmail.com>
      Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      2f263d14
    • Jarkko Nikula's avatar
      ACPI / scan: Fix enumeration for special SPI and I2C devices · e4330d8b
      Jarkko Nikula authored
      Commit f406270b ("ACPI / scan: Set the visited flag for all
      enumerated devices") caused that two group of special SPI or I2C
      devices do not enumerate. SPI and I2C devices are expected to be
      enumerated by the SPI and I2C subsystems but change caused that
      acpi_bus_attach() marks those devices with acpi_device_set_enumerated().
      
      First group of devices are matched using Device Tree compatible property
      with special _HID "PRP0001". Those devices have matched scan handler,
      acpi_scan_attach_handler() retuns 1 and acpi_bus_attach() marks them
      with acpi_device_set_enumerated().
      
      Second group of devices without valid _HID such as "LNXVIDEO" have
      device->pnp.type.platform_id set to zero and change again marks them
      with acpi_device_set_enumerated().
      
      Fix this by flagging the SPI and I2C devices during struct acpi_device
      object initialization time and let the code in acpi_bus_attach() to go
      through the device_attach() and acpi_default_enumeration() path for all
      SPI and I2C devices.
      
      Fixes: f406270b (ACPI / scan: Set the visited flag for all enumerated devices)
      Signed-off-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
      Acked-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
      Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
      Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
      e4330d8b