- 04 Jun, 2023 1 commit
-
-
Wei Fang authored
The rx_bytes of struct net_device_stats should count the length of ethernet frames excluding the FCS. However, there are two problems with the rx_bytes statistics of the current enetc driver. one is that the length of VLAN header is not counted if the VLAN extraction feature is enabled. The other is that the length of L2 header is not counted, because eth_type_trans() is invoked before updating rx_bytes which will subtract the length of L2 header from skb->len. BTW, the rx_bytes statistics of XDP path also have similar problem, I will fix it in another patch. Fixes: a800abd3 ("net: enetc: move skb creation into enetc_build_skb") Signed-off-by:
Wei Fang <wei.fang@nxp.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 03 Jun, 2023 6 commits
-
-
Wen Gu authored
SMCRv1 has a similar issue to SMCRv2 (see link below) that may access invalid MRs of RMBs when construct LLC ADD LINK CONT messages. BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 5 PID: 48 Comm: kworker/5:0 Kdump: loaded Tainted: G W E 6.4.0-rc3+ #49 Workqueue: events smc_llc_add_link_work [smc] RIP: 0010:smc_llc_add_link_cont+0x160/0x270 [smc] RSP: 0018:ffffa737801d3d50 EFLAGS: 00010286 RAX: ffff964f82144000 RBX: ffffa737801d3dd8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff964f81370c30 RBP: ffffa737801d3dd4 R08: ffff964f81370000 R09: ffffa737801d3db0 R10: 0000000000000001 R11: 0000000000000060 R12: ffff964f82e70000 R13: ffff964f81370c38 R14: ffffa737801d3dd3 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff9652bfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000008fa20004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> smc_llc_srv_rkey_exchange+0xa7/0x190 [smc] smc_llc_srv_add_link+0x3ae/0x5a0 [smc] smc_llc_add_link_work+0xb8/0x140 [smc] process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> When an alernate RNIC is available in system, SMC will try to add a new link based on the RNIC for resilience. All the RMBs in use will be mapped to the new link. Then the RMBs' MRs corresponding to the new link will be filled into LLC messages. For SMCRv1, they are ADD LINK CONT messages. However smc_llc_add_link_cont() may mistakenly access to unused RMBs which haven't been mapped to the new link and have no valid MRs, thus causing a crash. So this patch fixes it. Fixes: 87f88cda ("net/smc: rkey processing for a new link as SMC client") Link: https://lore.kernel.org/r/1685101741-74826-3-git-send-email-guwen@linux.alibaba.comSigned-off-by:
Wen Gu <guwen@linux.alibaba.com> Reviewed-by:
Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
Weihao Gao authored
This resolves the issue that generated binary is showing up as an untracked git file after every build on the kernel. Signed-off-by:
Weihao Gao <weihaogao@google.com> Signed-off-by:
-
Russell King (Oracle) authored
Raju Lakkaraju reported that the below commit caused a regression with Lan743x drivers and a 2.5G SFP. Sadly, this is because the commit was utterly wrong. Let's fix this properly by not moving the linkmode_and(), but instead copying the link ksettings and then modifying the advertising mask before passing the modified link ksettings to phylib. Fixes: df0acdc5 ("net: phylink: fix ksettings_set() ethtool call") Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1q4eLm-00Ayxk-GZ@rmk-PC.armlinux.org.ukSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net/ipv6: skip_notify_on_dev_down fix While reviewing Matthieu Baerts recent patch [1], I found it copied/pasted an existing bug around skip_notify_on_dev_down. First patch is a stable candidate, and second one can simply land in net tree. https://lore.kernel.org/lkml/20230601-net-next-skip_print_link_becomes_ready-v1-1-c13e64c14095@tessares.net/ ==================== Link: https://lore.kernel.org/r/20230601160445.1480257-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
Save a bit a space, and could help future sysctls to use the same pattern. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Acked-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Eric Dumazet authored
skip_notify_on_dev_down ctl table expects this field to be an int (4 bytes), not a bool (1 byte). Because proc_dou8vec_minmax() was added in 5.13, this patch converts skip_notify_on_dev_down to an int. Following patch then converts the field to u8 and use proc_dou8vec_minmax(). Fixes: 7c6bb7d2 ("net/ipv6: Add knob to skip DELROUTE message on device down") Signed-off-by:
-
- 02 Jun, 2023 5 commits
-
-
Arnd Bergmann authored
Without LED triggers, the driver now fails to build: drivers/net/dsa/qca/qca8k-leds.c: In function 'qca8k_parse_port_leds': drivers/net/dsa/qca/qca8k-leds.c:403:31: error: 'struct led_classdev' has no member named 'hw_control_is_supported' 403 | port_led->cdev.hw_control_is_supported = qca8k_cled_hw_control_is_supported; | ^ There is a mix of 'depends on' and 'select' for LEDS_TRIGGERS, so it's not clear what we should use here, but in general using 'depends on' causes fewer problems, so use that. Fixes: e0256648 ("net: dsa: qca8k: implement hw_control ops") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jiasheng Jiang authored
Replace platform_get_irq with platform_get_irq_optional because wol_irq is optional. Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
-
Akihiro Suda authored
With this commit, all the GIDs ("0 4294967294") can be written to the "net.ipv4.ping_group_range" sysctl. Note that 4294967295 (0xffffffff) is an invalid GID (see gid_valid() in include/linux/uidgid.h), and an attempt to register this number will cause -EINVAL. Prior to this commit, only up to GID 2147483647 could be covered. Documentation/networking/ip-sysctl.rst had "0 4294967295" as an example value, but this example was wrong and causing -EINVAL. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Co-developed-by:Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp> Signed-off-by:
-
Alexander Sverdlin authored
LAN9303 doesn't associate FDB (ALR) entries with VLANs, it has just one global Address Logic Resolution table [1]. Ignore VID in port_fdb_{add|del} methods, go on with the global table. This is the same semantics as hellcreek or RZ/N1 implement. Visible symptoms: LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to delete 00:xx:xx:xx:xx:cf vid 1 from fdb: -2 LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to add 00:xx:xx:xx:xx:cf vid 1 to fdb: -95 [1] https://ww1.microchip.com/downloads/en/DeviceDoc/00002308A.pdf Fixes: 0620427e ("net: dsa: lan9303: Add fdb/mdb manipulation") Signed-off-by:Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230531143826.477267-1-alexander.sverdlin@siemens.comSigned-off-by:
-
Qingfang DENG authored
After the blamed commit, the member key is longer 4-byte aligned. On platforms that do not support unaligned access, e.g., MIPS32R2 with unaligned_action set to 1, this will trigger a crash when accessing an IPv6 pneigh_entry, as the key is cast to an in6_addr pointer. Change the type of the key to u32 to make it aligned. Fixes: 62dd9318 ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.") Signed-off-by:
Qingfang DENG <qingfang.deng@siflower.com.cn> Link: https://lore.kernel.org/r/20230601015432.159066-1-dqfext@gmail.comSigned-off-by:
-
- 01 Jun, 2023 28 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Happy Wear a Dress Day. Fairly standard-sized batch of fixes, accounting for the lack of sub-tree submissions this week. The mlx5 IRQ fixes are notable, people were complaining about that. No fires burning. Current release - regressions: - eth: mlx5e: - multiple fixes for dynamic IRQ allocation - prevent encap offload when neigh update is running - eth: mana: fix perf regression: remove rx_cqes, tx_cqes counters Current release - new code bugs: - eth: mlx5e: DR, add missing mutex init/destroy in pattern manager Previous releases - always broken: - tcp: deny tcp_disconnect() when threads are waiting - sched: prevent ingress Qdiscs from getting installed in random locations in the hierarchy and moving around - sched: flower: fix possible OOB write in fl_set_geneve_opt() - netlink: fix NETLINK_LIST_MEMBERSHIPS length report - udp6: fix race condition in udp6_sendmsg & connect - tcp: fix mishandling when the sack compression is deferred - rtnetlink: validate link attributes set at creation time - mptcp: fix connect timeout handling - eth: stmmac: fix call trace when stmmac_xdp_xmit() is invoked - eth: amd-xgbe: fix the false linkup in xgbe_phy_status - eth: mlx5e: - fix corner cases in internal buffer configuration - drain health before unregistering devlink - usb: qmi_wwan: set DTR quirk for BroadMobi BM818 Misc: - tcp: return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if user_mss set" * tag 'net-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits) mptcp: fix active subflow finalization mptcp: add annotations around sk->sk_shutdown accesses mptcp: fix data race around msk->first access mptcp: consolidate passive msk socket initialization mptcp: add annotations around msk->subflow accesses mptcp: fix connect timeout handling rtnetlink: add the missing IFLA_GRO_ tb check in validate_linkmsg rtnetlink: move IFLA_GSO_ tb check to validate_linkmsg rtnetlink: call validate_linkmsg in rtnl_create_link ice: recycle/free all of the fragments from multi-buffer frame net: phy: mxl-gpy: extend interrupt fix to all impacted variants net: renesas: rswitch: Fix return value in error path of xmit net: dsa: mv88e6xxx: Increase wait after reset deactivation net: ipa: Use correct value for IPA_STATUS_SIZE tcp: fix mishandling when the sack compression is deferred. net/sched: flower: fix possible OOB write in fl_set_geneve_opt() sfc: fix error unwinds in TC offload net/mlx5: Read embedded cpu after init bit cleared net/mlx5e: Fix error handling in mlx5e_refresh_tirs net/mlx5: Ensure af_desc.mask is properly initialized ... -
Mike Christie authored
When switching from kthreads to vhost_tasks two bugs were added: 1. The vhost worker tasks's now show up as processes so scripts doing ps or ps a would not incorrectly detect the vhost task as another process. 2. kthreads disabled freeze by setting PF_NOFREEZE, but vhost tasks's didn't disable or add support for them. To fix both bugs, this switches the vhost task to be thread in the process that does the VHOST_SET_OWNER ioctl, and has vhost_worker call get_signal to support SIGKILL/SIGSTOP and freeze signals. Note that SIGKILL/STOP support is required because CLONE_THREAD requires CLONE_SIGHAND which requires those 2 signals to be supported. This is a modified version of the patch written by Mike Christie <michael.christie@oracle.com> which was a modified version of patch originally written by Linus. Much of what depended upon PF_IO_WORKER now depends on PF_USER_WORKER. Including ignoring signals, setting up the register state, and having get_signal return instead of calling do_group_exit. Tidied up the vhost_task abstraction so that the definition of vhost_task only needs to be visible inside of vhost_task.c. Making it easier to review the code and tell what needs to be done where. As part of this the main loop has been moved from vhost_worker into vhost_task_fn. vhost_worker now returns true if work was done. The main loop has been updated to call get_signal which handles SIGSTOP, freezing, and collects the message that tells the thread to exit as part of process exit. This collection clears __fatal_signal_pending. This collection is not guaranteed to clear signal_pending() so clear that explicitly so the schedule() sleeps. For now the vhost thread continues to exist and run work until the last file descriptor is closed and the release function is called as part of freeing struct file. To avoid hangs in the coredump rendezvous and when killing threads in a multi-threaded exec. The coredump code and de_thread have been modified to ignore vhost threads. Remvoing the special case for exec appears to require teaching vhost_dev_flush how to directly complete transactions in case the vhost thread is no longer running. Removing the special case for coredump rendezvous requires either the above fix needed for exec or moving the coredump rendezvous into get_signal. Fixes: 6e890c5d ("vhost: use vhost_tasks for worker threads") Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Co-developed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2023-05-31 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Read embedded cpu after init bit cleared net/mlx5e: Fix error handling in mlx5e_refresh_tirs net/mlx5: Ensure af_desc.mask is properly initialized net/mlx5: Fix setting of irq->map.index for static IRQ case net/mlx5: Remove rmap also in case dynamic MSIX not supported ==================== Link: https://lore.kernel.org/r/20230601031051.131529-1-saeed@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Fixes for connect timeout, access annotations, and subflow init Patch 1 allows the SO_SNDTIMEO sockopt to correctly change the connect timeout on MPTCP sockets. Patches 2-5 add READ_ONCE()/WRITE_ONCE() annotations to fix KCSAN issues. Patch 6 correctly initializes some subflow fields on outgoing connections. ==================== Link: https://lore.kernel.org/r/20230531-send-net-20230531-v1-0-47750c420571@kernel.orgSigned-off-by:
-
Paolo Abeni authored
Active subflow are inserted into the connection list at creation time. When the MPJ handshake completes successfully, a new subflow creation netlink event is generated correctly, but the current code wrongly avoid initializing a couple of subflow data. The above will cause misbehavior on a few exceptional events: unneeded mptcp-level retransmission on msk-level sequence wrap-around and infinite mapping fallback even when a MPJ socket is present. Address the issue factoring out the needed initialization in a new helper and invoking the latter from __mptcp_finish_join() time for passive subflow and from mptcp_finish_join() for active ones. Fixes: 0530020a ("mptcp: track and update contiguous data status") Cc: stable@vger.kernel.org Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
Christoph reported the mptcp variant of a recently addressed plain TCP issue. Similar to commit e14cadfd ("tcp: add annotations around sk->sk_shutdown accesses") add READ/WRITE ONCE annotations to silence KCSAN reports around lockless sk_shutdown access. Fixes: 71ba088c ("mptcp: cleanup accept and poll") Reported-by:
Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/401Reviewed-by:
-
Paolo Abeni authored
The first subflow socket is accessed outside the msk socket lock by mptcp_subflow_fail(), we need to annotate each write access with WRITE_ONCE, but a few spots still lacks it. Fixes: 76a13b31 ("mptcp: invoke MP_FAIL response when needed") Reviewed-by:
-
Paolo Abeni authored
When the msk socket is cloned at MPC handshake time, a few fields are initialized in a racy way outside mptcp_sk_clone() and the msk socket lock. The above is due historical reasons: before commit a88d0092 ("mptcp: simplify subflow_syn_recv_sock()") as the first subflow socket carrying all the needed date was not available yet at msk creation time We can now refactor the code moving the missing initialization bit under the socket lock, removing the init race and avoiding some code duplication. This will also simplify the next patch, as all msk->first write access are now under the msk socket lock. Fixes: 0397c6d8 ("mptcp: keep unaccepted MPC subflow into join list") Reviewed-by:
-
Paolo Abeni authored
The MPTCP can access the first subflow socket in a few spots outside the socket lock scope. That is actually safe, as MPTCP will delete the socket itself only after the msk sock close(). Still the such accesses causes a few KCSAN splats, as reported by Christoph. Silence the harmless warning adding a few annotation around the relevant accesses. Fixes: 71ba088c ("mptcp: cleanup accept and poll") Reported-by:
-
Paolo Abeni authored
Ondrej reported a functional issue WRT timeout handling on connect with a nice reproducer. The problem is that the current mptcp connect waits for both the MPTCP socket level timeout, and the first subflow socket timeout. The latter is not influenced/touched by the exposed setsockopt(). Overall the above makes the SO_SNDTIMEO a no-op on connect. Since mptcp_connect is invoked via inet_stream_connect and the latter properly handle the MPTCP level timeout, we can address the issue making the nested subflow level connect always unblocking. This also allow simplifying a bit the code, dropping an ugly hack to handle the fastopen and custom proto_ops connect. The issues predates the blamed commit below, but the current resolution requires the infrastructure introduced there. Fixes: 54f1944e ("mptcp: factor out mptcp_connect()") Reported-by:
Ondrej Mosnacek <omosnace@redhat.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/399 Cc: stable@vger.kernel.org Reviewed-by:
-
Jakub Kicinski authored
Xin Long says: ==================== rtnetlink: a couple of fixes in linkmsg validation validate_linkmsg() was introduced to do linkmsg validation for existing links. However, the new created links also need this linkmsg validation. Add validate_linkmsg() check for link creating in Patch 1, and add more tb checks into validate_linkmsg() in Patch 2 and 3. ==================== Link: https://lore.kernel.org/r/cover.1685548598.git.lucien.xin@gmail.comSigned-off-by:
-
Xin Long authored
This fixes the issue that dev gro_max_size and gso_ipv4_max_size can be set to a huge value: # ip link add dummy1 type dummy # ip link set dummy1 gro_max_size 4294967295 # ip -d link show dummy1 dummy addrgenmode eui64 ... gro_max_size 4294967295 Fixes: 0fe79f28 ("net: allow gro_max_size to exceed 65536") Fixes: 9eefedd5 ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device") Reported-by:Xiumei Mu <xmu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Xin Long authored
These IFLA_GSO_* tb check should also be done for the new created link, otherwise, they can be set to a huge value when creating links: # ip link add dummy1 gso_max_size 4294967295 type dummy # ip -d link show dummy1 dummy addrgenmode eui64 ... gso_max_size 4294967295 Fixes: 46e6b992 ("rtnetlink: allow GSO maximums to be set on device creation") Fixes: 9eefedd5 ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device") Signed-off-by: -
Xin Long authored
validate_linkmsg() was introduced by commit 1840bb13 ("[RTNL]: Validate hardware and broadcast address attribute for RTM_NEWLINK") to validate tb[IFLA_ADDRESS/BROADCAST] for existing links. The same check should also be done for newly created links. This patch adds validate_linkmsg() call in rtnl_create_link(), to avoid the invalid address set when creating some devices like: # ip link add dummy0 type dummy # ip link add link dummy0 name mac0 address 01:02 type macsec Fixes: 0e06877c ("[RTNETLINK]: rtnl_link: allow specifying initial device address") Signed-off-by:
-
Maciej Fijalkowski authored
The ice driver caches next_to_clean value at the beginning of ice_clean_rx_irq() in order to remember the first buffer that has to be freed/recycled after main Rx processing loop. The end boundary is indicated by first descriptor of frame that Rx processing loop has ended its duties. Note that if mentioned loop ended in the middle of gathering multi-buffer frame, next_to_clean would be pointing to the descriptor in the middle of the frame BUT freeing/recycling stage will stop at the first descriptor. This means that next iteration of ice_clean_rx_irq() will miss the (first_desc, next_to_clean - 1) entries. When running various 9K MTU workloads, such splats were observed: [ 540.780716] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 540.787787] #PF: supervisor read access in kernel mode [ 540.793002] #PF: error_code(0x0000) - not-present page [ 540.798218] PGD 0 P4D 0 [ 540.800801] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 540.805231] CPU: 18 PID: 3984 Comm: xskxceiver Tainted: G W 6.3.0-rc7+ #96 [ 540.813619] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 540.824209] RIP: 0010:ice_clean_rx_irq+0x2b6/0xf00 [ice] [ 540.829678] Code: 74 24 10 e9 aa 00 00 00 8b 55 78 41 31 57 10 41 09 c4 4d 85 ff 0f 84 83 00 00 00 49 8b 57 08 41 8b 4f 1c 65 8b 35 1a fa 4b 3f <48> 8b 02 48 c1 e8 3a 39 c6 0f 85 a2 00 00 00 f6 42 08 02 0f 85 98 [ 540.848717] RSP: 0018:ffffc9000f42fc50 EFLAGS: 00010282 [ 540.854029] RAX: 0000000000000004 RBX: 0000000000000002 RCX: 000000000000fffe [ 540.861272] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 00000000ffffffff [ 540.868519] RBP: ffff88984a05ac00 R08: 0000000000000000 R09: dead000000000100 [ 540.875760] R10: ffff88983fffcd00 R11: 000000000010f2b8 R12: 0000000000000004 [ 540.883008] R13: 0000000000000003 R14: 0000000000000800 R15: ffff889847a10040 [ 540.890253] FS: 00007f6ddf7fe640(0000) GS:ffff88afdf800000(0000) knlGS:0000000000000000 [ 540.898465] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 540.904299] CR2: 0000000000000000 CR3: 000000010d3da001 CR4: 00000000007706e0 [ 540.911542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 540.918789] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 540.926032] PKRU: 55555554 [ 540.928790] Call Trace: [ 540.931276] <TASK> [ 540.933418] ice_napi_poll+0x4ca/0x6d0 [ice] [ 540.937804] ? __pfx_ice_napi_poll+0x10/0x10 [ice] [ 540.942716] napi_busy_loop+0xd7/0x320 [ 540.946537] xsk_recvmsg+0x143/0x170 [ 540.950178] sock_recvmsg+0x99/0xa0 [ 540.953729] __sys_recvfrom+0xa8/0x120 [ 540.957543] ? do_futex+0xbd/0x1d0 [ 540.961008] ? __x64_sys_futex+0x73/0x1d0 [ 540.965083] __x64_sys_recvfrom+0x20/0x30 [ 540.969155] do_syscall_64+0x38/0x90 [ 540.972796] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 540.977934] RIP: 0033:0x7f6de5f27934 To fix this, set cached_ntc to first_desc so that at the end, when freeing/recycling buffers, descriptors from first to ntc are not missed. Fixes: 2fba7dc5 ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230531154457.3216621-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Xu Liang authored
The interrupt fix in commit 97a89ed1 should be applied on all variants of GPY2xx PHY and GPY115C. Fixes: 97a89ed1 ("net: phy: mxl-gpy: disable interrupts on GPY215 by default") Signed-off-by:
Xu Liang <lxu@maxlinear.com> Reviewed-by:
-
Yoshihiro Shimoda authored
Fix return value in the error path of rswitch_start_xmit(). If TX queues are full, this function should return NETDEV_TX_BUSY. Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20230529073817.1145208-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Linus Torvalds authored
Merge tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Takashi Sakamoto: "A single patch to use a flexible array rather than a zero-length one" * tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: Replace zero-length array with flexible-array member
-
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox fix from Jassi Brar: "Fix missing mutex unlock in mailbox-test" * tag 'mailbox-fixes-6.4-rc5' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: mailbox-test: fix a locking issue in mbox_test_message_write()
-
Andreas Svensson authored
A switch held in reset by default needs to wait longer until we can reliably detect it. An issue was observed when testing on the Marvell 88E6393X (Link Street). The driver failed to detect the switch on some upstarts. Increasing the wait time after reset deactivation solves this issue. The updated wait time is now also the same as the wait time in the mv88e6xxx_hardware_reset function. Fixes: 7b75e49d ("net: dsa: mv88e6xxx: wait after reset deactivation") Signed-off-by:
Andreas Svensson <andreas.svensson@axis.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.comSigned-off-by:
-
Gustavo A. R. Silva authored
Zero-length and one-element arrays are deprecated, and we are moving towards adopting C99 flexible-array members, instead. Address the following warnings found with GCC-13 and -fstrict-flex-arrays=3 enabled: sound/firewire/amdtp-stream.c: In function ‘build_it_pkt_header’: sound/firewire/amdtp-stream.c:694:17: warning: ‘generate_cip_header’ accessing 8 bytes in a region of size 0 [-Wstringop-overflow=] 694 | generate_cip_header(s, cip_header, data_block_counter, syt); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/firewire/amdtp-stream.c:694:17: note: referencing argument 2 of type ‘__be32[2]’ {aka ‘unsigned int[2]’} sound/firewire/amdtp-stream.c:667:13: note: in a call to function ‘generate_cip_header’ 667 | static void generate_cip_header(struct amdtp_stream *s, __be32 cip_header[2], | ^~~~~~~~~~~~~~~~~~~ This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/303 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/ZHT0V3SpvHyxCv5W@workSigned-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp>
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - Regression fix for overlong long timeouts during initialization on some Logitech Unifying devices (Bastien Nocera) - error handling and overflow fixes for Wacom driver (Denis Arefev, Jason Gerecke, Nikita Zhandarovich) * tag 'for-linus-2023060101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: logitech-hidpp: Handle timeout differently from busy HID: wacom: Add error check to wacom_parse_and_register() HID: google: add jewel USB id HID: wacom: avoid integer overflow in wacom_intuos_inout() HID: wacom: Check for string overflow from strscpy calls
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fix from Damien Le Moal: - Fix ata_find_dev() use of the device number to find a struct ata_device for a port. This addresses issues with some passthrough commands with libsas managed devices. * tag 'ata-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-scsi: Use correct device no in ata_find_dev()
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull smb server fixes from Steve French: "Eight server fixes (most also for stable): - Two fixes for uninitialized pointer reads (rename and link) - Fix potential UAF in oplock break - Two fixes for potential out of bound reads in negotiate - Fix crediting bug - Two fixes for xfstests (allocation size fix for test 694 and lookup issue shown by test 464)" * tag '6.4-rc4-smb3-server-fixes' of git://git.samba.org/ksmbd: ksmbd: call putname after using the last component ksmbd: fix incorrect AllocationSize set in smb2_get_info ksmbd: fix UAF issue from opinfo->conn ksmbd: fix multiple out-of-bounds read during context decoding ksmbd: fix slab-out-of-bounds read in smb2_handle_negotiate ksmbd: fix credit count leakage ksmbd: fix uninitialized pointer read in smb2_create_link() ksmbd: fix uninitialized pointer read in ksmbd_vfs_rename() -
Bert Karwatzki authored
IPA_STATUS_SIZE was introduced in commit b8dc7d0e as a replacement for the size of the removed struct ipa_status which had size sizeof(__le32[8]). Use this value as IPA_STATUS_SIZE. Fixes: b8dc7d0e ("net: ipa: stop using sizeof(status)") Signed-off-by:
Bert Karwatzki <spasswolf@web.de> Reviewed-by:
-
fuyuanli authored
In this patch, we mainly try to handle sending a compressed ack correctly if it's deferred. Here are more details in the old logic: When sack compression is triggered in the tcp_compressed_ack_kick(), if the sock is owned by user, it will set TCP_DELACK_TIMER_DEFERRED and then defer to the release cb phrase. Later once user releases the sock, tcp_delack_timer_handler() should send a ack as expected, which, however, cannot happen due to lack of ICSK_ACK_TIMER flag. Therefore, the receiver would not sent an ack until the sender's retransmission timeout. It definitely increases unnecessary latency. Fixes: 5d9f4262 ("tcp: add SACK compression") Suggested-by:
fuyuanli <fuyuanli@didiglobal.com> Signed-off-by:
Jason Xing <kerneljasonxing@gmail.com> Link: https://lore.kernel.org/netdev/20230529113804.GA20300@didi-ThinkCentre-M920t-N000/Reviewed-by:
-
Hangyu Hua authored
If we send two TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets and their total size is 252 bytes(key->enc_opts.len = 252) then key->enc_opts.len = opt->length = data_len / 4 = 0 when the third TCA_FLOWER_KEY_ENC_OPTS_GENEVE packet enters fl_set_geneve_opt. This bypasses the next bounds check and results in an out-of-bounds. Fixes: 0a6e7778 ("net/sched: allow flower to match tunnel options") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Reviewed-by:
Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Link: https://lore.kernel.org/r/20230531102805.27090-1-hbh25y@gmail.comSigned-off-by:
-
Edward Cree authored
Failure ladders weren't exactly unwinding what the function had done up to that point; most seriously, when we encountered an already offloaded rule, the failure path tried to remove the new rule from the hashtable, which would in fact remove the already-present 'old' rule (since it has the same key) from the table, and leak its resources. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202305200745.xmIlkqjH-lkp@intel.com/ Fixes: d902e1a7 ("sfc: bare bones TC offload on EF100") Fixes: 17654d84 ("sfc: add offloading of 'foreign' TC (decap) rules") Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
-
