- 31 Oct, 2019 40 commits
-
-
Ioana Ciornei authored
The dpaa2-eth driver now has support for connecting to its associated PHY device found through standard OF bindings. This happens when the DPNI object (that the driver probes on) gets connected to a DPMAC. When that happens, the device tree is looked up by the DPMAC ID, and the associated PHY bindings are found. The old logic of handling the net device's link state by hand still needs to be kept, as the DPNI can be connected to other devices on the bus than a DPMAC: other DPNI, DPSW ports, etc. This logic is only engaged when there is no DPMAC (and therefore no phylink instance) attached. The MC firmware support multiple type of DPMAC links: TYPE_FIXED, TYPE_PHY. The TYPE_FIXED mode does not require any DPMAC management from Linux side, and as such, the driver will not handle such a DPMAC. Although PHYLINK typically handles SFP cages and in-band AN modes, for the moment the driver only supports the RGMII interfaces found on the LX2160A. Support for other modes will come later. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
Currently the function is called at every link up event, although the FQID values will only change when the DPNI is disconnected from the current object and reconnected to a different one. The patch also avoids the forward declaration of update_tx_fqids. Signed-off-by:
-
Ioana Ciornei authored
Using the newly added fsl_mc_get_endpoint function a fsl-mc driver can find its associated endpoint (another object at the other link of a MC firmware link). The API will be used in the following patch in order to discover the connected DPMAC object of a DPNI. Also, the fsl_mc_device_lookup function is made available to the entire fsl-mc bus driver and not just for the dprc driver. Signed-off-by:
-
Ioana Ciornei authored
Export all device types present on the fsl-mc bus in order to be able to actually use the is_fsl_mc_bus_*() functions from drivers on the bus. Signed-off-by:
-
David S. Miller authored
Charles McLachlan says: ==================== sfc: Add XDP support Supply the XDP callbacks in netdevice ops that enable lower level processing of XDP frames. Changes in v4: - Handle the failure to send some frames in efx_xdp_tx_buffers() properly. Changes in v3: - Fix a BUG_ON when trying to allocate piobufs to xdp queues. - Add a missed trace_xdp_exception. Changes in v2: - Use of xdp_return_frame_rx_napi() in tx.c - Addition of xdp_rxq_info_valid and xdp_rxq_info_failed to track when xdp_rxq_info failures occur. - Renaming of rc to err and more use of unlikely(). - Cut some duplicated code and fix an array overrun. - Actually increment n_rx_xdp_tx when packets are transmitted. ==================== Signed-off-by: -
Charles McLachlan authored
Count XDP packet drops, error drops, transmissions and redirects and expose these counters via the ethtool stats command. Signed-off-by:
Charles McLachlan <cmclachlan@solarflare.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Charles McLachlan authored
Provide an ndo_xdp_xmit function that uses the XDP tx queue for this CPU to send the packet. Signed-off-by:
-
Charles McLachlan authored
Each CPU needs access to its own queue to allow uncontested transmission of XDP_TX packets. This means we need to allocate (up front) enough channels ("xdp transmit channels") to provide at least one extra tx queue per CPU. These tx queues should not do TSO. Signed-off-by: -
Charles McLachlan authored
Provide an ndo_bpf function to efx_netdev_ops that allows setting and querying of xdp programs on an interface. Also check that the MTU size isn't too big when setting a program or when the MTU is explicitly set. Signed-off-by:
-
Charles McLachlan authored
Adds a field to hold an attached xdp_prog, but never populates it (see following patch). Also, XDP_TX support is deferred to a later patch in the series. Track failures of xdp_rxq_info_reg() via per-queue xdp_rxq_info_valid flags and a per-nic xdp_rxq_info_failed flag. The per-queue flags are needed to prevent attempts to xdp_rxq_info_unreg() structs that failed to register. Possibly the API could be changed in the future to avoid the need for these flags. Signed-off-by:
-
Charles McLachlan authored
Add a field to efx_tx_buffer so that we can track xdp_frames. Add a flag so that buffers that contain xdp_frames can be identified and passed to xdp_return_frame. Signed-off-by:
-
Nathan Chancellor authored
When building for 32-bit ARM, there is a link time error because of a 64-bit division: ld.lld: error: undefined symbol: __aeabi_uldivmod >>> referenced by spectrum_buffers.c >>> net/ethernet/mellanox/mlxsw/spectrum_buffers.o:(mlxsw_sp_buffers_init) in archive drivers/built-in.a >>> did you mean: __aeabi_uidivmod >>> defined in: arch/arm/lib/lib.a(lib1funcs.o Avoid this by using div_u64, which is designed to avoid this problem. Fixes: bc9f6e94 ("mlxsw: spectrum_buffers: Calculate the size of the main pool") Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Tested-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2019-10-31 please apply the following series of spooky qeth updates for net-next. The first two patches add support for an enhanced TX doorbell, which enables us to do more xmit_more-based bulking. Note that this requires one patch for the s390/qdio base layer, which has been graciously acked by Heiko to go through your tree. The remaining patches are just the usual minor cleanups/improvements. ==================== Signed-off-by: -
Julian Wiedmann authored
Instead of storing the multicast-mapped MAC address in an IP address object, just calculate the MAC address when actually building a cmd for the IP address. While at it, also clean up some rather verbose copying of IP addresses. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Replace our custom implementations with the stack's version of IP address hashing. Signed-off-by:
-
Julian Wiedmann authored
Any change to the card state should only be driven by qeth_l?_set_online() and qeth_l?_stop_card(). qeth_qdio_clear_card() currently also gets called from (a) qeth_core_shutdown(), where we haven't walked through the whole teardown sequence. So changing the state to DOWN is not accurate. (b) qeth_core_hardsetup_card(), which is only called while the card is still in DOWN state. No change in behaviour here. Signed-off-by: -
Julian Wiedmann authored
When setting a device online, both subdrivers have the same code to program the HW trap and Isolation mode. Move that code into a single place. Signed-off-by:
-
Julian Wiedmann authored
When napi_complete_done() returns false, the NAPI instance is still active and we can keep the IRQ disabled a little longer. Signed-off-by:
-
Julian Wiedmann authored
qdio.h recently gained a new helper macro that handles wrap-around on a QDIO queue, consistently use it across all of qeth. Signed-off-by:
-
Julian Wiedmann authored
For IQD devices with Multi-Write support, we can defer the queue-flush further and transmit multiple IO buffers with a single TX doorbell. The same-target restriction still applies. Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
This allows IQD drivers to send out multiple SBALs with a single SIGA instruction. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
David S. Miller authored
Madalin Bucur says: ==================== DPAA Ethernet changes v2: remove excess braces Here are some more changes for the DPAA 1.x area. In summary, these changes use pages for the receive buffers and for the scatter-gather table fed to the HW on the Tx path, perform a bit of cleanup in some convoluted parts of the code, add some minor fixes related to DMA (un)mapping sequencing for a not so common scenario, add a device link that removes the interfaces when the QMan portal in use by them is removed. ==================== Signed-off-by: -
Madalin Bucur authored
Before this change, unbinding the QMan portals did not trigger a corresponding unbinding of the dpaa_eth making use of it; the first QMan portal related operation issued afterwards crashed the kernel. The device link ensures the dpaa_eth dependency upon the qman portal used is honoured at the QMan portal removal. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Madalin Bucur authored
Introduce the API required to make sure that the devices that use the QMan portal are unbound when the portal is unbound. Signed-off-by:
-
Madalin Bucur authored
Make sure all the frames that are in flight have time to be processed before the interface is completely brought down. Add a missing delay for the Rx path. Signed-off-by:
-
Madalin Bucur authored
User reports that an application making an (incorrect) call to restart AN on a fixed link DPAA interface triggers an error in the kernel log while the returned EINVAL should be enough. Reported-by:
Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Signed-off-by:
-
Madalin Bucur authored
Prior to this change, the frames dropped on receive or transmit were not displayed in the ethtool statistics, leaving the dropped frames unaccounted for. Signed-off-by:
-
Madalin Bucur authored
Use a page to store the scatter gather table on the transmit path. Signed-off-by:
-
Madalin Bucur authored
Remove cast, align variable name, simplify DMA map size computation. Signed-off-by:
-
Madalin Bucur authored
Instead of reading skb fields, use information from the DPAA frame descriptor. Signed-off-by:
-
Madalin Bucur authored
Avoid casts and repeated conversions. Signed-off-by:
-
Madalin Bucur authored
The dpaa_cleanup_tx_fd() function is called by the frame transmit confirmation callback but also on several error paths. This function is reading the transmit timestamp value. Avoid reading an invalid timestamp value on the error paths. Fixes: 4664856e ("dpaa_eth: add support for hardware timestamping") Signed-off-by:
-
Madalin Bucur authored
DMA unmapping is required before accessing the HW provided timestamping information. Fixes: 4664856e ("dpaa_eth: add support for hardware timestamping") Signed-off-by:
-
Madalin Bucur authored
Change the buffers used for reception from netdev_frags to pages. Signed-off-by:
-
Madalin Bucur authored
Currently the DPAA Ethernet driver is using three buffer pools for each interface, with three different sizes for the buffers provided for the FMan reception path. This patch reduces the number of buffer pools to one per interface. This change is in preparation of another, that will be switching from netdev_frags to page backed buffers for the receive path. Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: add some optimizations and cleanups This series adds some code optimizations and cleanups for the HNS3 ethernet driver. [patch 1/9] dumps some debug information when reset fail. [patch 2/9] dumps some struct netdev_queue information when TX timeout. [patch 3/9] cleanups some magic numbers. [patch 4/9] cleanups some coding style issue. [patch 5/9] fixes a compiler warning. [patch 6/9] optimizes some local variable initialization. [patch 7/9] modifies some comments. [patch 8/9] cleanups some print format warnings. [patch 9/9] cleanups byte order issue. ==================== Signed-off-by: -
Guojia Liao authored
Though the hip08 and the IMP(Intelligent Management Processor) have the same byte order right now, it is better to convert __be or __le variable into the CPU's byte order before print. Signed-off-by:
Guojia Liao <liaoguojia@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Guojia Liao authored
Using '%d' for printing type unsigned int or '%u' for type int would cause static tools to give false warnings, so this patch cleanups this warning by using the suitable format specifier of the type of variable. BTW, modifies the type of some variables and macro to synchronize with their usage. Signed-off-by:
-
Guangbin Huang authored
This patch makes the comment for macro HCLGE_MBX_GET_VF_FLR_STATUS more correct, and adds comments in some place to make the code more readable. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Guangbin Huang authored
The variable tx_ring is unnecessary to be initialized as it will be set before used, and the variable rst_cnt is better to be initialized when declaration for simplification. Signed-off-by:
-
