Skip to content

L
linux
Switch branch/tag
  1. 23 Jul, 2021 2 commits
  3. 22 Jul, 2021 14 commits
    • Linus Torvalds's avatar
      Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux · 9f42f674
      Linus Torvalds authored 
      Pull arm64 fixes from Will Deacon:
 "A pair of arm64 fixes for -rc3. The straightforward one is a fix to
  our firmware calling stub, which accidentally started corrupting the
  link register on machines with SVE. Since these machines don't really
  exist yet, it wasn't spotted in -next.

  The other fix is a revert-and-a-bit of a patch originally intended to
  allow PTE-level huge mappings for the VMAP area on 32-bit PPC 8xx. A
  side-effect of this change was that our pXd_set_huge() implementations
  could be replaced with generic dummy functions depending on the levels
  of page-table being used, which in turn broke the boot if we fail to
  create the linear mapping as a result of using these functions to
  operate on the pgd. Huge thanks to Michael Ellerman for modifying the
  revert so as not to regress PPC 8xx in terms of functionality.

  Anyway, that's the background and it's also available in the commit
  message along with Link tags pointing at all of the fun.

  Summary:

   - Fix hang when issuing SMC on SVE-capable system due to
     clobbered LR

   - Fix boot failure due to missing block mappings with folded
     page-table"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  Revert "mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge"
  arm64: smccc: Save lr before calling __arm_smccc_sve_check()
      9f42f674
    • Linus Torvalds's avatar
      Merge tag 'hyperv-fixes-signed-20210722' of... · 7c14e4d6
      Linus Torvalds authored 
      Merge tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - bug fix from Haiyang for vmbus CPU assignment

 - revert of a bogus patch that went into 5.14-rc1

* tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Revert "x86/hyperv: fix logical processor creation"
  Drivers: hv: vmbus: Fix duplicate CPU assignments within a device
      7c14e4d6
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 4784dc99
      Linus Torvalds authored 
      Pull networking fixes from David Miller:

 1) Fix type of bind option flag in af_xdp, from Baruch Siach.

 2) Fix use after free in bpf_xdp_link_release(), from Xuan Zhao.

 3) PM refcnt imbakance in r8152, from Takashi Iwai.

 4) Sign extension ug in liquidio, from Colin Ian King.

 5) Mising range check in s390 bpf jit, from Colin Ian King.

 6) Uninit value in caif_seqpkt_sendmsg(), from Ziyong Xuan.

 7) Fix skb page recycling race, from Ilias Apalodimas.

 8) Fix memory leak in tcindex_partial_destroy_work, from Pave Skripkin.

 9) netrom timer sk refcnt issues, from Nguyen Dinh Phi.

10) Fix data races aroun tcp's tfo_active_disable_stamp, from Eric
    Dumazet.

11) act_skbmod should only operate on ethernet packets, from Peilin Ye.

12) Fix slab out-of-bpunds in fib6_nh_flush_exceptions(),, from Psolo
    Abeni.

13) Fix sparx5 dependencies, from Yajun Deng.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
  dpaa2-switch: seed the buffer pool after allocating the swp
  net: sched: cls_api: Fix the the wrong parameter
  net: sparx5: fix unmet dependencies warning
  net: dsa: tag_ksz: dont let the hardware process the layer 4 checksum
  net: dsa: ensure linearized SKBs in case of tail taggers
  ravb: Remove extra TAB
  ravb: Fix a typo in comment
  net: dsa: sja1105: make VID 4095 a bridge VLAN too
  tcp: disable TFO blackhole logic by default
  sctp: do not update transport pathmtu if SPP_PMTUD_ENABLE is not set
  net: ixp46x: fix ptp build failure
  ibmvnic: Remove the proper scrq flush
  selftests: net: add ESP-in-UDP PMTU test
  udp: check encap socket in __udp_lib_err
  sctp: update active_key for asoc when old key is being replaced
  r8169: Avoid duplicate sysfs entry creation error
  ixgbe: Fix packet corruption due to missing DMA sync
  Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()"
  ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions
  fsl/fman: Add fibre support
  ...
      4784dc99
    • Linus Torvalds's avatar
      Merge tag 'mmc-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc · 5e09e197
      Linus Torvalds authored 
      Pull MMC fixes from Ulf Hansson:

 - Use kref to fix KASAN splats triggered during card removal

 - Don't allocate IDA for OF aliases

* tag 'mmc-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Don't allocate IDA for OF aliases
  mmc: core: Use kref in place of struct mmc_blk_data::usage
      5e09e197
    • Ioana Ciornei's avatar
      dpaa2-switch: seed the buffer pool after allocating the swp · 7aaa0f31
      Ioana Ciornei authored 
      Any interraction with the buffer pool (seeding a buffer, acquire one) is
made through a software portal (SWP, a DPIO object).
There are circumstances where the dpaa2-switch driver probes on a DPSW
before any DPIO devices have been probed. In this case, seeding of the
buffer pool will lead to a panic since no SWPs are initialized.

To fix this, seed the buffer pool after making sure that the software
portals have been probed and are ready to be used.

Fixes: 0b1b7137 ("staging: dpaa2-switch: handle Rx path on control interface")
Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7aaa0f31
    • Yajun Deng's avatar
      net: sched: cls_api: Fix the the wrong parameter · 9d85a6f4
      Yajun Deng authored 
      The 4th parameter in tc_chain_notify() should be flags rather than seq.
Let's change it back correctly.

Fixes: 32a4f5ec ("net: sched: introduce chain object to uapi")
Signed-off-by: default avatarYajun Deng <yajun.deng@linux.dev>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9d85a6f4
    • Randy Dunlap's avatar
      net: sparx5: fix unmet dependencies warning · 98c5b13f
      Randy Dunlap authored 
      WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES
  Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=y] && HAS_IOMEM [=y]
  Selected by [y]:
  - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] && OF [=y]
Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      98c5b13f
    • David S. Miller's avatar
      Merge branch 'ksz-dsa-fixes' · 5ca096db
      David S. Miller authored 
      Lino Sanfilippo says:

====================
Fixes for KSZ DSA switch

These patches fix issues I encountered while using a KSZ9897 as a DSA
switch with a broadcom GENET network device as the DSA master device.

PATCH 1 fixes an invalid access to an SKB in case it is scattered.
PATCH 2 fixes incorrect hardware checksum calculation caused by the DSA
tag.

Changes in v2:
- instead of linearizing the SKBs only for KSZ switches ensure linearized
  SKBs for all tail taggers by clearing the feature flags NETIF_F_HW_SG and
  NETIF_F_FRAGLIST (suggested by Vladimir Oltean)

The patches have been tested with a KSZ9897 and apply against net-next.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5ca096db
    • Lino Sanfilippo's avatar
      net: dsa: tag_ksz: dont let the hardware process the layer 4 checksum · 37120f23
      Lino Sanfilippo authored 
      If the checksum calculation is offloaded to the network device (e.g due to
NETIF_F_HW_CSUM inherited from the DSA master device), the calculated
layer 4 checksum is incorrect. This is since the DSA tag which is placed
after the layer 4 data is considered as being part of the daa and thus
errorneously included into the checksum calculation.
To avoid this, always calculate the layer 4 checksum in software.
Signed-off-by: default avatarLino Sanfilippo <LinoSanfilippo@gmx.de>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      37120f23
    • Lino Sanfilippo's avatar
      net: dsa: ensure linearized SKBs in case of tail taggers · 21cf377a
      Lino Sanfilippo authored 
      The function skb_put() that is used by tail taggers to make room for the
DSA tag must only be called for linearized SKBS. However in case that the
slave device inherited features like NETIF_F_HW_SG or NETIF_F_FRAGLIST the
SKB passed to the slaves transmit function may not be linearized.
Avoid those SKBs by clearing the NETIF_F_HW_SG and NETIF_F_FRAGLIST flags
for tail taggers.
Furthermore since the tagging protocol can be changed at runtime move the
code for setting up the slaves features into dsa_slave_setup_tagger().
Suggested-by: default avatarVladimir Oltean <olteanv@gmail.com>
Signed-off-by: default avatarLino Sanfilippo <LinoSanfilippo@gmx.de>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      21cf377a
    • Biju Das's avatar
      ravb: Remove extra TAB · 9f061b9a
      Biju Das authored 
      Align the member description comments for struct ravb_desc by
removing the extra TAB.
Signed-off-by: default avatarBiju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: default avatarLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: default avatarSergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9f061b9a
    • Biju Das's avatar
      ravb: Fix a typo in comment · 291d0a2c
      Biju Das authored 
      Fix the typo RX->TX in comment, as the code following the comment
process TX and not RX.
Signed-off-by: default avatarBiju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: default avatarLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: default avatarSergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      291d0a2c
    • Vladimir Oltean's avatar
      net: dsa: sja1105: make VID 4095 a bridge VLAN too · e40cba94
      Vladimir Oltean authored 
      This simple series of commands:

ip link add br0 type bridge vlan_filtering 1
ip link set swp0 master br0

fails on sja1105 with the following error:
[   33.439103] sja1105 spi0.1: vlan-lookup-table needs to have at least the default untagged VLAN
[   33.447710] sja1105 spi0.1: Invalid config, cannot upload
Warning: sja1105: Failed to change VLAN Ethertype.

For context, sja1105 has 3 operating modes:
- SJA1105_VLAN_UNAWARE: the dsa_8021q_vlans are committed to hardware
- SJA1105_VLAN_FILTERING_FULL: the bridge_vlans are committed to hardware
- SJA1105_VLAN_FILTERING_BEST_EFFORT: both the dsa_8021q_vlans and the
  bridge_vlans are committed to hardware

Swapping out a VLAN list and another in happens in
sja1105_build_vlan_table(), which performs a delta update procedure.
That function is called from a few places, notably from
sja1105_vlan_filtering() which is called from the
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler.

The above set of 2 commands fails when run on a kernel pre-commit
8841f6e6 ("net: dsa: sja1105: make devlink property
best_effort_vlan_filtering true by default"). So the priv->vlan_state
transition that takes place is between VLAN-unaware and full VLAN
filtering. So the dsa_8021q_vlans are swapped out and the bridge_vlans
are swapped in.

So why does it fail?

Well, the bridge driver, through nbp_vlan_init(), first sets up the
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING attribute, and only then
proceeds to call nbp_vlan_add for the default_pvid.

So when we swap out the dsa_8021q_vlans and swap in the bridge_vlans in
the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler, there are no bridge
VLANs (yet). So we have wiped the VLAN table clean, and the low-level
static config checker complains of an invalid configuration. We _will_
add the bridge VLANs using the dynamic config interface, albeit later,
when nbp_vlan_add() calls us. So it is natural that it fails.

So why did it ever work?

Surprisingly, it looks like I only tested this configuration with 2
things set up in a particular way:
- a network manager that brings all ports up
- a kernel with CONFIG_VLAN_8021Q=y

It is widely known that commit ad1afb00 ("vlan_dev: VLAN 0 should be
treated as "no vlan tag" (802.1p packet)") installs VID 0 to every net
device that comes up. DSA treats these VLANs as bridge VLANs, and
therefore, in my testing, the list of bridge_vlans was never empty.

However, if CONFIG_VLAN_8021Q is not enabled, or the port is not up when
it joins a VLAN-aware bridge, the bridge_vlans list will be temporarily
empty, and the sja1105_static_config_reload() call from
sja1105_vlan_filtering() will fail.

To fix this, the simplest thing is to keep VID 4095, the one used for
CPU-injected control packets since commit ed040abc ("net: dsa:
sja1105: use 4095 as the private VLAN for untagged traffic"), in the
list of bridge VLANs too, not just the list of tag_8021q VLANs. This
ensures that the list of bridge VLANs will never be empty.

Fixes: ec5ae610 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Reported-by: default avatarRadu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e40cba94
    • Wei Wang's avatar
      tcp: disable TFO blackhole logic by default · 213ad73d
      Wei Wang authored 
      Multiple complaints have been raised from the TFO users on the internet
stating that the TFO blackhole logic is too aggressive and gets falsely
triggered too often.
(e.g. https://blog.apnic.net/2021/07/05/tcp-fast-open-not-so-fast/)
Considering that most middleboxes no longer drop TFO packets, we decide
to disable the blackhole logic by setting
/proc/sys/net/ipv4/tcp_fastopen_blackhole_timeout_set to 0 by default.

Fixes: cf1ef3f0 ("net/tcp_fastopen: Disable active side TFO in certain scenarios")
Signed-off-by: default avatarWei Wang <weiwan@google.com>
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Acked-by: default avatarNeal Cardwell <ncardwell@google.com>
Acked-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
Acked-by: default avatarYuchung Cheng <ycheng@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      213ad73d
  5. 21 Jul, 2021 19 commits
  7. 20 Jul, 2021 5 commits
    • Markus Boehme's avatar
      ixgbe: Fix packet corruption due to missing DMA sync · 09cfae9f
      Markus Boehme authored 
      When receiving a packet with multiple fragments, hardware may still
touch the first fragment until the entire packet has been received. The
driver therefore keeps the first fragment mapped for DMA until end of
packet has been asserted, and delays its dma_sync call until then.

The driver tries to fit multiple receive buffers on one page. When using
3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned
off/build_skb is being used) on an architecture with 4K pages, the
driver allocates an order 1 compound page and uses one page per receive
buffer. To determine the correct offset for a delayed DMA sync of the
first fragment of a multi-fragment packet, the driver then cannot just
use PAGE_MASK on the DMA address but has to construct a mask based on
the actual size of the backing page.

Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration
will always sync the first page of a compound page. With the SWIOTLB
enabled this can lead to corrupted packets (zeroed out first fragment,
re-used garbage from another packet) and various consequences, such as
slow/stalling data transfers and connection resets. For example, testing
on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled
(e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle
out without this patch.

Cc: stable@vger.kernel.org
Fixes: 0c5661ec ("ixgbe: fix crash in build_skb Rx code path")
Signed-off-by: default avatarMarkus Boehme <markubo@amazon.com>
Tested-by: default avatarTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      09cfae9f
    • Heiko Carstens's avatar
      s390: update defconfigs · 0cde560a
      Heiko Carstens authored 
      Signed-off-by: default avatarHeiko Carstens <hca@linux.ibm.com>
      0cde560a
    • kernel test robot's avatar
      s390/cpumf: fix semicolon.cocci warnings · 7d244643
      kernel test robot authored 
      arch/s390/kernel/perf_cpum_cf.c:748:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: a029a4ea ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility")
CC: Thomas Richter <tmricht@linux.ibm.com>
Reported-by: default avatarkernel test robot <lkp@intel.com>
Signed-off-by: default avatarkernel test robot <lkp@intel.com>
Signed-off-by: default avatarHeiko Carstens <hca@linux.ibm.com>
      7d244643
    • Alexander Egorenkov's avatar
      s390/boot: fix use of expolines in the DMA code · 463f36c7
      Alexander Egorenkov authored 
      The DMA code section of the decompressor must be compiled with expolines
if Spectre V2 mitigation has been enabled for the decompressed kernel.
This is required because although the decompressor's image contains
the DMA code section, it is handed over to the decompressed kernel for use.

Because the DMA code is already slow w/o expolines, use expolines always
regardless whether the decompressed kernel is using them or not. This
simplifies the DMA code by dropping the conditional compilation of
expolines.

Fixes: bf726301 ("s390: use proper expoline sections for .dma code")
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: default avatarAlexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: default avatarHeiko Carstens <hca@linux.ibm.com>
Signed-off-by: default avatarHeiko Carstens <hca@linux.ibm.com>
      463f36c7
    • Jia He's avatar
      Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()" · 91bed556
      Jia He authored 
      This reverts commit 6206b798.

That patch added additional spin_{un}lock_bh(), which was harmless
but pointless. The orginal code path has guaranteed the pair of
spin_{un}lock_bh().

We'd better revert it before we find the exact root cause of the
bug_on mentioned in that patch.

Fixes: 6206b798 ("qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()")
Cc: David S. Miller <davem@davemloft.net>
Cc: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: default avatarJia He <justin.he@arm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      91bed556
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7