This had been delayed for some time due to failure to work on the one piece
of G41 hardware we had, and lack of success reports from anybody else.
Current hardware appears to be OK.
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
[anholt: hand-applied due to conflicts with IGD patches]
Signed-off-by: Eric Anholt <eric@anholt.net>

The changes to opregion initialisation order meant that the ASLE setup
code might not be run at the correct time. Ensure that the interrupts are
set up.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

The i915 DRM triggers registration of the ACPI video driver on load. It
should unregister it at unload in order to avoid generating backtraces on
being reloaded.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

The ACPI video driver defers registration to the i915 driver if the
system supports opregion-mediated backlight control. This registration
was only being performed in the KMS case. Ensure it's done even if we
don't have modesetting enabled.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

Transitions to TILING_NONE skipped the call to unbind the object, which left
the fence register set and caused future CPU access through the GTT to
access the object in tiled mode.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

Userland is broken if it's trying this, but we also shouldn't allow oopses.
Signed-off-by: Eric Anholt <eric@anholt.net>

This patch corrects a pretty big oversight in the KMS code for 965+
chips.  The current code is missing tiled surface register programming,
so userland can allocate a tiled surface and use it for mode setting,
resulting in corruption.  This patch fixes that, allowing for tiled
front buffers on 965+.

Cc: stable@kernel.org
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (64 commits)
  phylib: Fix delay argument of schedule_delayed_work
  NET/ixgbe: Fix powering off during shutdown
  NET/e1000e: Fix powering off during shutdown
  NET/e1000: Fix powering off during shutdown
  packet: avoid warnings when high-order page allocation fails
  gianfar: stop send queue before resetting gianfar
  myr10ge: again fix lro_gen_skb() alignment
  declance: convert to net_device_ops
  bfin_mac: convert to net_device_ops
  au1000: convert to net_device_ops
  atarilance: convert to net_device_ops
  a2065: convert to net_device_ops
  ixgbe: update real_num_tx_queues on changing num_rx_queues
  ixgbe: fix tx queue index
  Revert "rose: zero length frame filtering in af_rose.c"
  sfc: Use correct macro to set event bitfield
  sfc: Match calls to netif_napi_add() and netif_napi_del()
  bonding: Remove debug printk
  e1000/e1000: fix compile warning
  ehea: Fix incomplete conversion to net_device_ops
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: remove some pointless conditionals before kfree()
  sbus: changed ioctls to unlocked
  sparc: asm/atomic.h on 32bit should include asm/system.h for xchg
  sparc64: Fix smp_callin() locking.

The commit a390d1f3 ("phylib: convert state_queue work to
delayed_work") missed converting 'expires' value to 'delay' value.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prevent ixgbe from putting the adapter into D3 during shutdown except when
we're going to power off the system, since doing that may generally cause
problems with kexec to happen (such problems were observed for igb and
forcedeth).  For this purpose seperate ixgbe_shutdown() from ixgbe_suspend()
and use the appropriate PCI PM callbacks in both of them.
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prevent e1000e from putting the adapter into D3 during shutdown except when
we're going to power off the system, since doing that may generally cause
problems with kexec to happen (such problems were observed for igb and
forcedeth).  For this purpose seperate e1000e_shutdown() from e1000e_suspend()
and use the appropriate PCI PM callbacks in both of them.
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prevent e1000 from putting the adapter into D3 during shutdown except when
we're going to power off the system, since doing that may generally cause
problems with kexec to happen (such problems were observed for igb and
forcedeth).  For this purpose seperate e1000_shutdown() from e1000_suspend()
and use the appropriate PCI PM callbacks in both of them.
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't try and predeclare inline funcs like this:

	static inline void wait_migrated_callbacks(void)
	...
	static void _rcu_barrier(enum rcu_barrier type)
	{
		...
		wait_migrated_callbacks();
	}
	...
	static inline void wait_migrated_callbacks(void)
	{
		wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
	}

as it upsets some versions of gcc under some circumstances:

	kernel/rcupdate.c: In function `_rcu_barrier':
	kernel/rcupdate.c:125: sorry, unimplemented: inlining failed in call to 'wait_migrated_callbacks': function body not available
	kernel/rcupdate.c:152: sorry, unimplemented: called from here

This can be dealt with by simply putting the static variables (rcu_migrate_*)
at the top, and moving the implementation of the function up so that it
replaces its forward declaration.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The default CONFIG_BUG=n version of BUG() should incorporate an empty a
do...while statement to avoid compilation weirdness.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Stop gcc from generating uninitialised variable warnings after BUG().  The
problem is that MN10300's implementation of BUG() invokes system call 15 which
doesn't return - but there's no way to tell the compiler that and also emit the
bug table element with the correct file and line data.

So instead, we make the do...while wrapper in _debug_bug_trap() an endless loop
from which there's no escape.

Also, while we're at it, (1) get rid of _debug_bug_trap() and just implement
directly as BUG(), and (2) make the implementation of BUG() contingent on
CONFIG_BUG=y.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Wire up missing system calls preadv() and pwritev().
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Discard duplicate PFN_xxx() macros from arch code as they're now in the
general headers.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] boot cputime accounting
  [S390] add read_persistent_clock
  [S390] cpu hotplug and accounting values
  [S390] fix idle time accounting
  [S390] smp: fix cpu_possible_map initialization
  [S390] dasd: fix idaw boundary checking for track based ccw
  [S390] dasd: Use the new async framework for autoonlining.
  [S390] qdio: remove dead timeout handler
  [S390] appldata: Use new mod_virt_timer_periodic() function.
  [S390] extend virtual timer interface by mod_virt_timer_periodic
  [S390] stp synchronization retry timer
  [S390] call nmi_enter/nmi_exit on machine checks
  [S390] wire up preadv/pwritev system calls
  [S390] s390: move machine flags to lowcore

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix the cmd cache keys for amp verbs
  ALSA: add missing definitions(letters) to HD-Audio.txt
  ALSA: hda - Add quirk mask for Fujitsu Amilo laptops with ALC883
  [ALSA] intel8x0: add one retry to the ac97_clock measurement routine
  [ALSA] intel8x0: fix wrong conditions in ac97_clock measure routine
  ALSA: hda - Avoid call of snd_jack_report at release
  ALSA: add private_data to struct snd_jack
  ALSA: snd-usb-caiaq: rename files to remove redundant information in file pathes
  ALSA: snd-usb-caiaq: clean up header includes
  ALSA: sound/pci: use memdup_user()
  ALSA: sound/usb: use memdup_user()
  ALSA: sound/isa: use memdup_user()
  ALSA: sound/core: use memdup_user()
  [ALSA] intel8x0: do not use zero value from PICB register
  [ALSA] intel8x0: an attempt to make ac97_clock measurement more reliable
  [ALSA] pcm-midlevel: Add more strict buffer position checks based on jiffies
  [ALSA] hda_intel: fix unexpected ring buffer positions
  ASoC: Disable S3C64xx support in Kconfig
  ASoC: magician: remove un-necessary #include of pxa-regs.h and hardware.h

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Use DEFINE_SPINLOCK
  GFS2: cleanup file_operations mess
  GFS2: Move umount flush rwsem
  GFS2: Fix symlink creation race
  GFS2: Make quotad's waiting interruptible

* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (28 commits)
  cfq-iosched: add close cooperator code
  cfq-iosched: log responsible 'cfqq' in idle timer arm
  cfq-iosched: tweak kick logic a bit more
  cfq-iosched: no need to save interrupts in cfq_kick_queue()
  brd: fix cacheflushing
  brd: support barriers
  swap: Remove code handling bio_alloc failure with __GFP_WAIT
  gfs2: Remove code handling bio_alloc failure with __GFP_WAIT
  ext4: Remove code handling bio_alloc failure with __GFP_WAIT
  dio: Remove code handling bio_alloc failure with __GFP_WAIT
  block: Remove code handling bio_alloc failure with __GFP_WAIT
  bio: add documentation to bio_alloc()
  splice: add helpers for locking pipe inode
  splice: remove generic_file_splice_write_nolock()
  ocfs2: fix i_mutex locking in ocfs2_splice_to_file()
  splice: fix i_mutex locking in generic_splice_write()
  splice: remove i_mutex locking in splice_from_pipe()
  splice: split up __splice_from_pipe()
  block: fix SG_IO to return a proper error value
  cfq-iosched: don't delay queue kick for a merged request
  ...

* topic/hda:
  ALSA: hda - Fix the cmd cache keys for amp verbs
  ALSA: add missing definitions(letters) to HD-Audio.txt

Fix the key value generation for get/set amp verbs.  The upper bits of
the parameter have to be combined with the verb value to be unique for
each direction/index of amp access.

This fixes the resume problem on some hardwares like Macbook after
the channel mode is changed.
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc: pseries/dtl.c should include asm/firmware.h
  powerpc: Fix data-corrupting bug in __futex_atomic_op
  powerpc/pseries: Set error_state to pci_channel_io_normal in eeh_report_reset()
  powerpc: Allow 256kB pages with SHMEM
  powerpc: Document new FSL I2C bindings and cleanup
  powerpc/mm: Fix compile warning
  powerpc/85xx: TQM8548: update defconfig
  powerpc/85xx: TQM8548: use proper phy-handles for enet2 and enet3
  powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodes
  powerpc: Add support for early tlbilx opcode
  powerpc: Fix tlbilx opcode

It turns out that 'smp_call_function_many()' doesn't work at all like
'smp_call_function_single()', and my change to Andrew's patch to use it
rather than a loop over all CPU's acpi-cpufreq doesn't work.

My bad.

'smp_call_function_many()' has two "features" (aka "documented bugs"):

 (a) it needs to be called with preemption disabled, because it uses
     smp_processor_id() without guarding the CPU lookup with 'get_cpu()'
     and 'put_cpu()' like the 'single' variant does.

 (b) even if the current CPU is part of the CPU mask, it won't do the
     call on that CPU.

Still, we're better off trying to use 'smp_call_function_many()' than
looping over CPU's, since it at least in theory allows us to use a
broadcast IPI and do it all in parallel.  So let's just work around the
silly semantic bugs in that function.
Reported-and-tested-by: Ali Gholami Rudi <ali@rudi.ir>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Latest tcpdump/libpcap triggers annoying messages because of high order page
allocation failures (when lowmem exhausted or fragmented)

These allocation errors are correctly handled so could be silent.

[22660.208901] tcpdump: page allocation failure. order:5, mode:0xc0d0
[22660.208921] Pid: 13866, comm: tcpdump Not tainted 2.6.30-rc2 #170
[22660.208936] Call Trace:
[22660.208950]  [<c04e2b46>] ? printk+0x18/0x1a
[22660.208965]  [<c02760f7>] __alloc_pages_internal+0x357/0x460
[22660.208980]  [<c0276251>] __get_free_pages+0x21/0x40
[22660.208995]  [<c04cc835>] packet_set_ring+0x105/0x3d0
[22660.209009]  [<c04ccd1d>] packet_setsockopt+0x21d/0x4d0
[22660.209025]  [<c0270400>] ? filemap_fault+0x0/0x450
[22660.209040]  [<c0449e34>] sys_setsockopt+0x54/0xa0
[22660.209053]  [<c044b97f>] sys_socketcall+0xef/0x270
[22660.209067]  [<c0202e34>] sysenter_do_call+0x12/0x26
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we have processes that are working in close proximity to each
other on disk, we don't want to idle wait. Instead allow the close
process to issue a request, getting better aggregate bandwidth.
The anticipatory scheduler has similar checks, noop and deadline do
not need it since they don't care about process <-> io mappings.

The code for CFQ is a little more involved though, since we split
request queues into per-process contexts.

This fixes a performance problem with eg dump(8), since it uses
several processes in some silly attempt to speed IO up. Even if
dump(8) isn't really a valid case (it should be fixed by using
CLONE_IO), there are other cases where we see close processes
and where idling ends up hurting performance.

Credit goes to Jeff Moyer <jmoyer@redhat.com> for writing the
initial implementation.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Makes it easier to read the traces.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

We only kick the dispatch for an idling queue, if we think it's a
(somewhat) fully merged request. Also allow a kick if we have other
busy queues in the system, since we don't want to risk waiting for
a potential merge in that case. It's better to get some work done and
proceed.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

It's called from the workqueue handlers from process context, so
we always have irqs enabled when entered.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

brd is missing a flush_dcache_page. On 2nd thoughts, perhaps it is the
pagecache's responsibility to flush user virtual aliases (the driver of
course should flush kernel virtual mappings)... but anyway, there
already exists cache flushing for one direction of transfer, so we
should add the other.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

brd is always ordered (not that it matters, as it is defined not to
survive when the system goes down). So tell the block layer it is
ordered, which might be of help with testing filesystems.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Remove code handling bio_alloc failure with __GFP_WAIT.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Remove code handling bio_alloc failure with __GFP_WAIT.
GFP_NOFS implies __GFP_WAIT.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Remove code handling bio_alloc failure with __GFP_WAIT.
GFP_NOIO implies __GFP_WAIT.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Remove code handling bio_alloc failure with __GFP_WAIT.
GFP_KERNEL implies __GFP_WAIT.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Remove code handling bio_alloc failure with __GFP_WAIT.
GFP_KERNEL implies __GFP_WAIT.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Explain that with __GFP_WAIT set it will not fail, and that the caller
must never allocate more than 1 bio at the time.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

There are lots of sequences like this, especially in splice code:

	if (pipe->inode)
		mutex_lock(&pipe->inode->i_mutex);
	/* do something */
	if (pipe->inode)
		mutex_unlock(&pipe->inode->i_mutex);

so introduce helpers which do the conditional locking and unlocking.
Also replace the inode_double_lock() call with a pipe_double_lock()
helper to avoid spreading the use of this functionality beyond the
pipe code.

This patch is just a cleanup, and should cause no behavioral changes.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>